Download or read book Enhanced Oil Recovery written by Ajay Mandal and published by CRC Press. This book was released on 2023-11-29 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oil recovery efficiency can be increased by applying the enhanced oil recovery (EOR) processes, which are based on the improvement of mobility ratio, reduction of interfacial tension between oil and water, wettability alteration, reduction of oil viscosity, formation of oil banks, and so forth. This book describes the different EOR methods and their mechanisms, which are traditionally used after conventional primary and secondary processes. The present scenario of different EOR processes, at both the field application stage and research stage, is also covered. Further, it discusses some of the recent advances in EOR processes such as low-salinity water flooding, the application of nanotechnology in EOR, microbial EOR, carbonated water injection, etc. Features: Comprehensive coverage of all enhanced oil recovery (EOR) methods Discussion of reservoir rock and fluid characteristics Illustration of steps in design and field implementation as well as the screening criteria for process selection Coverage of novel topics of nanotechnology in EOR and hybrid EOR method and low-salinity waterfloods Emphasis on recent technologies, feasibility, and implementation of hybrid technologies This book is aimed at graduate students, professionals, researchers, chemists, and personnel involved in petroleum engineering, chemical engineering, surfactant manufacturing, polymer manufacturing, oil/gas service companies, and carbon capture and utilization.

Download or read book Technical Bulletin written by British Paper and Board Makers' Association. Technical Section and published by . This book was released on 1927 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Surface and Interfacial Science written by M. C. Rastogi and published by Alpha Science Int'l Ltd.. This book was released on 2003 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the changes occurring at surfaces and interfaces involving two or multi-phase system due to the interaction between surface atoms/molecules and those added either intentionally or inadvertently in form of gases (vapours) solvents (aqueous and nonaqueous) and solutions mostly of surface active agents. A clear picture of the mechanism involved in industrial processes, namely, lubrication, adhesion, wear, friction, maintenance engineering, surface coating, metallurgical operation in production of iron and steel, corrosion prevention, mineral beneficiation including recovery of fine coal from slurries from coal washeries, tertiary oil recovery etc. are provided.

Download or read book Slow Dynamics in Complex Systems written by Tōwa Daigaku. International Symposium and published by American Institute of Physics. This book was released on 1999-04-23 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives up-to-date information on slow dynamics in complex systems, such as polymers, emulsions, colloidal suspensions, glass-forming liquids, etc., many of which exhibit glass transitions. It contains review articles by leading scientists and contributed papers by authors at the forefront of research. Experiments along with theories and computer simulations are emphasized.

Download or read book The Surface Chemistry of Natural Particles written by Garrison Sposito and published by Oxford University Press. This book was released on 2004-03-25 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the development of both experiment and theory in natural surface particle chemistry. It emphasizes insights gained over the past few years, and concentrates on molecular spectroscopy, kinetics, and equilibrium as they apply to natural particle surface reactions in aqueous media. The discussion, divided among five chapters, is complemented by lengthy annotations, reading suggestions, and end-of-chapter problem sets that require a critical reading of important technical journal articles.

Download or read book Encyclopedia of Emulsion Technology written by Daniel Schuster and published by CRC Press. This book was released on 1996-06-12 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume extends the discussions of basic theory and applications featured in volumes 1-3 of this series. It includes details on emulsion stability and emulsification; an examination on the effect of added polymers on emulsion rheology; findings on the role of repulsive forces in aqueous solubility, micelle stability, micro-emulsion formation, and phase separation; and a model for microemulsions.

Download or read book Micro and Nanostructured Multiphase Polymer Blend Systems written by Charef Harrats and published by CRC Press. This book was released on 2005-09-29 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro- and Nanostructured Multiphase Polymer Blend Systems: Phase Morphology and Interfaces focuses on the formation of phase morphology in polymer blends and copolymers and considers various types of blends including thermosets, thermoplastics, thermoplastic vulcanizates, and structured copolymers. The book carefully debates the processing

Download or read book Slow Dynamics in Condensed Matter written by Tōwa Daigaku. International Symposium and published by American Institute of Physics. This book was released on 1992 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed primarily for physicists in condensed matter and some engineers working in polymers, this book deals with the subject of slow dynamics in condensed matter.

Download or read book Handbook of Surface and Colloid Chemistry written by K. S. Birdi and published by CRC Press. This book was released on 2015-06-25 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the Handbook of Surface and Colloid Chemistry informs you of significant recent developments in the field. It highlights new applications and provides revised insight on surface and colloid chemistry's growing role in industrial innovations. The contributors to each chapter are internationally recognized experts. Several chapter

Download or read book Chemical Deterioration and Physical Instability of Food and Beverages written by Leif H Skibsted and published by Elsevier. This book was released on 2010-04-23 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a food product to be a success in the marketplace it must be stable throughout its shelf-life. Quality deterioration due to chemical changes and alterations in condition due to physical instability are not always recognised, yet can be just as problematic as microbial spoilage. This book provides an authoritative review of key topics in this area. Chapters in part one focus on the chemical reactions which can negatively affect food quality, such as oxidative rancidity, and their measurement. Part two reviews quality deterioration associated with physical changes, such as moisture loss, gain and migration, crystallization and emulsion breakdown. Contributions in the following section outline the likely effects on different foods and beverages, including bakery products, fruit and vegetables, ready-to-eat meals and wine. With contributions from leaders in their fields, Chemical deterioration and physical instability of food and beverages is an essential reference for R&D and QA staff in the food industry and researchers with an interested in this subject. - Examines chemical reactions which can negatively affect food quality and measurement - Reviews quality deterioration associated with physical changes such as moisture loss, gain and migration, and crystallization - Documents deterioration in specific food and beverage products including bakery products, frozen foods and wine

Download or read book Slow Dynamics in Complex Systems written by American Institute of Physics and published by American Institute of Physics. This book was released on 2004-06-02 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives up-to-date information on the liquid-glass transition in various disciplines, such as physics, chemistry, biology, engineering, polymer science, and computer science. The book contains review articles by leading scientists and contributed papers by authors in the forefront of research. The systems studied covered almost all states of matter including solids, liquids, complex solutions, polymers, and suspensions. Significant progress was made on a variety of topics. Among these were experimental and theoretical studies of colloidal systems; experiments on glass to glass transitions in micellar systems; theoretical studies of polyelectrolytes and polymer melts and networks; theoretical and computer studies of hydrodynamics in suspensions and Rayleigh-Taylor and Rayleigh-Couette instabilities; theoretical and experimental studies of the glass transition; computer simulations of the glass transition in thin films; vibrational motions in glass forming liquids and glasses; the effects of shear on supercooled liquids; engineering and experimental studies of metallic glasses; mode-coupling studies of complex glass formation; and Lorentz gas studies of the translational and rotational motion of a rigid rod.

Download or read book NASA Technical Translation written by United States. National Aeronautics and Space Administration and published by . This book was released on 1965 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Hydrodynamic Mechanism for the Coalescence of Liquid Drops written by Sidney Bertram Lang and published by . This book was released on 1962 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Journal of Physical Chemistry written by and published by . This book was released on 1928 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Physical Review written by and published by . This book was released on 1999-03 with total page 1326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publishes papers that report results of research in statistical physics, plasmas, fluids, and related interdisciplinary topics. There are sections on (1) methods of statistical physics, (2) classical fluids, (3) liquid crystals, (4) diffusion-limited aggregation, and dendritic growth, (5) biological physics, (6) plasma physics, (7) physics of beams, (8) classical physics, including nonlinear media, and (9) computational physics.

Download or read book Characterization of Polymer Blends written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap for a reference dedicated to the characterization of polymer blends and their micro and nano morphologies, this book provides comprehensive, systematic coverage in a one-stop, two-volume resource for all those working in the field. Leading researchers from industry and academia, as well as from government and private research institutions around the world summarize recent technical advances in chapters devoted to their individual contributions. In so doing, they examine a wide range of modern characterization techniques, from microscopy and spectroscopy to diffraction, thermal analysis, rheology, mechanical measurements and chromatography. These methods are compared with each other to assist in determining the best solution for both fundamental and applied problems, paying attention to the characterization of nanoscale miscibility and interfaces, both in blends involving copolymers and in immiscible blends. The thermodynamics, miscibility, phase separation, morphology and interfaces in polymer blends are also discussed in light of new insights involving the nanoscopic scale. Finally, the authors detail the processing-morphology-property relationships of polymer blends, as well as the influence of processing on the generation of micro and nano morphologies, and the dependence of these morphologies on the properties of blends. Hot topics such as compatibilization through nanoparticles, miscibility of new biopolymers and nanoscale investigations of interfaces in blends are also addressed. With its application-oriented approach, handpicked selection of topics and expert contributors, this is an outstanding survey for anyone involved in the field of polymer blends for advanced technologies.

Download or read book Physicochemistry of Petroleum Dispersions in Refining Technology written by Maciej Paczuski and published by BoD – Books on Demand. This book was released on 2024-03-06 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes the results of research dealing with two types of petroleum dispersions: water in petroleum fractions and fuels as well as asphaltenes in crude oil. Such industrial research is aimed at acquiring new knowledge useful for improving processes and products. The main goal of the research carried out was to solve problems of refining technology and the exploitation of petroleum products. Some of the developed solutions have been patented and applied in industry. The problem of solubilizing a small technological amount of water in gasoline and diesel fuels with the aid of surfactant compositions has been successfully resolved. This solution has been used in business practice; it also increases the water tolerance of gasoline with 5% ethanol and allows for the effective use of LPG. The coalescence on fibrous barriers for dewatering fractions from the atmospheric distillation of crude oil allowed for the economic removal of dispersed water and additionally - the removal from diesel distillates of a significant part of the mineral contaminations. A coalescing method of removing sodium lye dispersed in heavy gasoline from the FCC process was successfully used in an industrial plant, replacing the sand filter used in Merox technology. The deep dehydration of the hydrotreated kerosene fraction by evaporating water into an inert gas, a nitrogen blanket, was developed. The product was additionally protected against the aging processes. The influence of pyrolysis oil, a waste product of the pyrolysis process, on the physical structure of crude oil was investigated. The results of the laboratory tests were verified in industrial trials in the AVD plant. Positive test results made it possible to use pyrolysis oil on an industrial scale changing the dispersion structure and properties of crude oil as well as distillation results.