Download or read book Sliding Mode Observer Based Robust Fault Detection and Isolation written by Hawraa Fouad Almusawi and published by LAP Lambert Academic Publishing. This book was released on 2016-01-20 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: The early detection and isolation of the faults in a systems be difficult when a failure occurs. This is due to several factors, including the large number of elements which designed such systems and complexity of interdependence which is sometimes difficult to understand. This book has proposed a method more suitable for early detection and isolation of faults, this method is based on acombination between analytical based technique (sliding mode observer ) and knowledge based technique (fuzzy logic controller). The sliding mode observer technique was used for the fault detection purpose based on residual signal which represent the difference between output of the process and output of the model that used as a fault indicator, while the fuzzy logic technique was used as a fault isolator depending on fuzzy rules base and fuzzy membership functions. The performance of this hybrid technique is evaluated on a model of DC motor, the proposed scheme is illustrated on a Matlab/Simulink simulator and the results demonstrated a successful implementation of the proposed FDI scheme. This book deals with additive faults, these faults can either occur at the actuator or the sensor of the syste

Download or read book Fault Detection and Fault Tolerant Control Using Sliding Modes written by Halim Alwi and published by Springer Science & Business Media. This book was released on 2011-06-07 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Detection and Fault-tolerant Control Using Sliding Modes is the first text dedicated to showing the latest developments in the use of sliding-mode concepts for fault detection and isolation (FDI) and fault-tolerant control in dynamical engineering systems. It begins with an introduction to the basic concepts of sliding modes to provide a background to the field. This is followed by chapters that describe the use and design of sliding-mode observers for FDI using robust fault reconstruction. The development of a class of sliding-mode observers is described from first principles through to the latest schemes that circumvent minimum-phase and relative-degree conditions. Recent developments have shown that the field of fault tolerant control is a natural application of the well-known robustness properties of sliding-mode control. A family of sliding-mode control designs incorporating control allocation, which can deal with actuator failures directly by exploiting redundancy, is presented. Various realistic case studies, specifically highlighting aircraft systems and including results from the implementation of these designs on a motion flight simulator, are described. A reference and guide for researchers in fault detection and fault-tolerant control, this book will also be of interest to graduate students working with nonlinear systems and with sliding modes in particular. Advances in Industrial Control aims to report and encourage the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.

Download or read book Robust Observer Based Fault Diagnosis for Nonlinear Systems Using MATLAB written by Jian Zhang and published by Springer. This book was released on 2016-05-27 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces several observer-based methods, including: • the sliding-mode observer • the adaptive observer • the unknown-input observer and • the descriptor observer method for the problem of fault detection, isolation and estimation, allowing readers to compare and contrast the different approaches. The authors present basic material on Lyapunov stability theory, H¥ control theory, sliding-mode control theory and linear matrix inequality problems in a self-contained and step-by-step manner. Detailed and rigorous mathematical proofs are provided for all the results developed in the text so that readers can quickly gain a good understanding of the material. MATLAB® and Simulink® codes for all the examples, which can be downloaded from http://extras.springer.com, enable students to follow the methods and illustrative examples easily. The systems used in the examples make the book highly relevant to real-world problems in industrial control engineering and include a seventh-order aircraft model, a single-link flexible joint robot arm and a satellite controller. To help readers quickly find the information they need and to improve readability, the individual chapters are written so as to be semi-independent of each other. Robust Oberserver-Based Fault Diagnosis for Nonlinear Systems Using MATLAB® is of interest to process, aerospace, robotics and control engineers, engineering students and researchers with a control engineering background.

Download or read book Robust Observer Based Fault Diagnosis for Nonlinear Systems written by Jian Zhang and published by . This book was released on 2013 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of observer based fault diagnosis for nonlinear systems has become an important topic of research in the control community over the last three decades. In this thesis, the issues of robust fault detection, isolation and estimation of actuator faults and sensor faults for Lipschitz nonlinear systems has been studied using sliding mode, adaptive and descriptor system approaches. The problem of estimating actuator faults is initially discussed. The sliding mode observer (SMO) is constructed directly based on the uncertain nonlinear system. The fault is reconstructed using the concept of equivalent output injection. Sensor faults are treated as actuator faults by using integral observer based approach and then the problem of sensor fault diagnosis, including detection, isolation and estimation is studied. The proposed scheme has the ability of successfully diagnosing incipient sensor faults in the presence of system uncertainties. The results are then extended to simultaneously estimate actuator faults and sensor faults using SMOs, adaptive observers (AO) and descriptor system approaches. H_ filtering is integrated into the observers to ensure that the fault estimation error as well as the state estimation error are less than a prescribed performance level. The existence of the proposed fault estimators and their stability analysis are carried out in terms of LMIs. It has been observed that when the Lipschitz constant is unknown or too large, it may fail to find feasible solutions for observers. In order to deal with this situation, adaptation laws are used to generate an additional control input to the nonlinear system. The additional control input can eliminate the effect of Lipschitz constant on the solvability of LMIs. The effectiveness of various methods proposed in this research has been demonstrated using several numerical and practical examples. The simulation results demonstrate that the proposed methods can achieve the prescribed performance requirements.

Download or read book Fault Detection and Diagnosis in Engineering Systems written by Janos Gertler and published by Routledge. This book was released on 2017-11-22 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring a model-based approach to fault detection and diagnosis in engineering systems, this book contains up-to-date, practical information on preventing product deterioration, performance degradation and major machinery damage.;College or university bookstores may order five or more copies at a special student price. Price is available upon request.

Download or read book Variable Structure Control of Complex Systems written by Xing-Gang Yan and published by Springer. This book was released on 2016-12-05 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematizes recent research work on variable-structure control. It is self-contained, presenting necessary mathematical preliminaries so that the theoretical developments can be easily understood by a broad readership. The text begins with an introduction to the fundamental ideas of variable-structure control pertinent to their application in complex nonlinear systems. In the core of the book, the authors lay out an approach, suitable for a large class of systems, that deals with system uncertainties with nonlinear bounds. Its treatment of complex systems in which limited measurement information is available makes the results developed convenient to implement. Various case-study applications are described, from aerospace, through power systems to river pollution control with supporting simulations to aid the transition from mathematical theory to engineering practicalities. The book addresses systems with nonlinearities, time delays and interconnections and considers issues such as stabilization, observer design, and fault detection and isolation. It makes extensive use of numerical and practical examples to render its ideas more readily absorbed. Variable-Structure Control of Complex Systems will be of interest to academic researchers studying control theory and its application in nonlinear, time-delayed an modular large-scale systems; the robustness of its approach will also be attractive to control engineers working in industries associate with aerospace, electrical and mechanical engineering.

Download or read book Eigenstructure Assignment for Control System Design written by G. P. Liu and published by John Wiley & Sons. This book was released on 1998-04-08 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Helicopters, aircraft and missiles are just some of the practical multivariable control systems to which eigenstructure assignment has been applied in recent years. Liu and Patton offer a uniquely integrated introduction to eigenstructure assignment theory and techniques for multi-input multi-output control system design. Features include: * Introduction to the Eigenstructure Assignment Toolbox for use with MATLAB (examples available via the Internet) providing engineers with a powerful set of tools for the design of multivariable systems * Broad coverage including the principle of eigenstructure assignment, basic, insensitive, robust and multiobjective eigenstructure assignment for multirate sampled-data systems, descriptor systems and fault detection systems * Description of the majority of known eigenstructure assignment methods for both state and output feedback control offering the reader a concise reference * Combination of time-domain and frequency-domain performance specifications for robust control design Postgraduates and researchers studying control engineering will appreciate the combination of mathematical theory and practical issues. Control engineers, particularly those working in the aerospace industry, will profit from the detailed application sections which relate eigenstructure assignment to real industrial problems.

Download or read book Robust Fault Diagnosis in Linear and Nonlinear Systems Based on Unknown Input and Sliding Mode Functional Observer Methodologies written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Robust Model Based Fault Diagnosis for Dynamic Systems written by Jie Chen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is an increasing demand for dynamic systems to become more safe and reliable. This requirement extends beyond the normally accepted safety-critical systems of nuclear reactors and aircraft where safety is paramount important, to systems such as autonomous vehicles and fast railways where the system availability is vital. It is clear that fault diagnosis (including fault detection and isolation, FDI) has been becoming an important subject in modern control theory and practice. For example, the number of papers on FDI presented in many control-related conferences has been increasing steadily. The subject of fault detection and isolation continues to mature to an established field of research in control engineering. A large amount of knowledge on model-based fault diagnosis has been ac cumulated through the literature since the beginning of the 1970s. However, publications are scattered over many papers and a few edited books. Up to the end of 1997, there is no any book which presents the subject in an unified framework. The consequence of this is the lack of "common language", dif ferent researchers use different terminology. This problem has obstructed the progress of model-based FDI techniques and has been causing great concern in research community. Many survey papers have been published to tackle this problem. However, a book which presents the materials in a unified format and provides a comprehensive foundation of model-based FDI is urgently needed.

Download or read book Observer Based Fault Estimation Techniques written by Ke Zhang and published by Springer. This book was released on 2017-10-11 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates observer-fault estimation techniques in detail, while also highlighting recent research and findings regarding fault estimation. Many practical control systems are subject to possible malfunctions, which may cause significant performance loss or even system instability. To improve the reliability, performance and safety of dynamical systems, fault diagnosis techniques are now receiving considerable attention, both in research and applications, and have been the subject of intensive investigations. Fault detection – the essential first step in fault diagnosis – is a binary decision-making process used to determine whether or not a fault has occurred. In turn, fault isolation is used to identify the location of the faulty component, while fault estimation is used to identify the size of the fault online. Compared with the problems involved in fault detection and isolation, fault estimation is considerably more challenging.

Download or read book Fault Tolerant Flight Control written by Christopher Edwards and published by Springer. This book was released on 2010-04-18 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by leading experts in the field, this book provides the state-of-the-art in terms of fault tolerant control applicable to civil aircraft. The book consists of five parts and includes online material.

Download or read book Observer Based Robust Fault Detection written by Fu Wah Poon and published by . This book was released on 2000 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book New Trends in Observer Based Control written by Olfa Boubaker and published by Academic Press. This book was released on 2019-03-30 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Trends in Observer-Based Control: An Introduction to Design Approaches and Engineering Applications, Volume One presents a clear-and-concise introduction to the latest advances in observer-based control design. It provides a comprehensive tutorial on new trends in the design of observer-based controllers for which the separation principle is well established. In addition, since the theoretical developments remain more advanced than the engineering applications, more experimental results are still needed. A wide range of applications are covered, and the book contains worked examples which make it ideal for both advanced courses and researchers starting in the field. - Presents a clear-and-concise introduction to the latest advances in observer-based control design - Offers concise content on the many facets of observer-based control design - Discusses key applications in the fields of power systems, robotics and mechatronics, and flight and automotive systems

Download or read book Robust Integration of Model Based Fault Estimation and Fault Tolerant Control written by Jianglin Lan and published by Springer Nature. This book was released on 2020-12-11 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robust Integration of Model-Based Fault Estimation and Fault-Tolerant Control is a systematic examination of methods used to overcome the inevitable system uncertainties arising when a fault estimation (FE) function and a fault-tolerant controller interact as they are employed together to compensate for system faults and maintain robustly acceptable system performance. It covers the important subject of robust integration of FE and FTC with the aim of guaranteeing closed-loop stability. The reader’s understanding of the theory is supported by the extensive use of tutorial examples, including some MATLAB®-based material available from the Springer website and by industrial-applications-based material. The text is structured into three parts: Part I examines the basic concepts of FE and FTC, providing extensive insight into the importance of and challenges involved in their integration; Part II describes five effective strategies for the integration of FE and FTC: sequential, iterative, simultaneous, adaptive-decoupling, and robust decoupling; and Part III begins to extend the proposed strategies to nonlinear and large-scale systems and covers their application in the fields of renewable energy, robotics and networked systems. The strategies presented are applicable to a broad range of control problems, because in the absence of faults the FE-based FTC naturally reverts to conventional observer-based control. The book is a useful resource for researchers and engineers working in the area of fault-tolerant control systems, and supplementary material for a graduate- or postgraduate-level course on fault diagnosis and FTC. Advances in Industrial Control reports and encourages the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.

Download or read book Issues of Fault Diagnosis for Dynamic Systems written by Ron J. Patton and published by Springer Science & Business Media. This book was released on 2000-03-29 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the time our first book Fault Diagnosis in Dynamic Systems: The ory and Applications was published in 1989 by Prentice Hall, there has been a surge in interest in research and applications into reliable methods for diag nosing faults in complex systems. The first book sold more than 1,200 copies and has become the main text in fault diagnosis for dynamic systems. This book will follow on this excellent record by focusing on some of the advances in this subject, by introducing new concepts in research and new application topics. The work cannot provide an exhaustive discussion of all the recent research in fault diagnosis for dynamic systems, but nevertheless serves to sample some of the major issues. It has been valuable once again to have the co-operation of experts throughout the world working in industry, gov emment establishments and academic institutions in writing the individual chapters. Sometimes dynamical systems have associated numerical models available in state space or in frequency domain format. When model infor mation is available, the quantitative model-based approach to fault diagnosis can be taken, using the mathematical model to generate analytically redun dant alternatives to the measured signals. When this approach is used, it becomes important to try to understand the limitations of the mathematical models i. e. , the extent to which model parameter variations occur and the effect of changing the systems point of operation.

Download or read book Fault Diagnosis in Nonlinear Systems Using Learning and Sliding Mode Approaches with Applications for Satellite Control Systems written by Qing Wu and published by . This book was released on 2008 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis, model based fault detection, isolation, and estimation problem in several classes of nonlinear systems is studied using sliding mode and learning approaches. First, a fault diagnosis scheme using a bank of repetitive learning observers is presented. The diagnostic observers are established in a generalized observer scheme, and the observer inputs are repetitively updated using the output estimation error in a proportional-integral structure. Next, a framework for robust fault diagnosis using sliding mode and learning approaches is proposed to deal with various types of faults in a class of nonlinear systems with triangular input form. In the designed diagnostic observers, first order and second order sliding modes are used respectively, to achieve robust state estimation in the presence of uncertainties, and additional online estimators are established to characterize the faults. In order to guarantee that the sliding mode is able to distinguish the system uncertainties from the faults, two iterative adaptive laws are used to update the sliding mode switching gains. Moreover, different online fault estimators are developed using neural state space models, iterative learning algorithms, and wavelet networks. Another class of nonlinear systems where an unmeasurable part of state can be described as a nonlinear function of the output and its derivatives is considered next. Accordingly, a class of fault diagnosis schemes using high order sliding mode differentiators (HOSMDs) and online estimators are proposed, where neural adaptive estimators and iterative neuron PID estimators are designed. Additionally, a fault diagnosis scheme using HOSMDs and neural networks based uncertainty observers is designed in order to achieve a better performance in robust fault detection. If the uncertainties can be accurately estimated, the generated diagnostic residual is more sensitive to the onset of faults. Finally, a fault diagnosis scheme using Takagi-Sugeno (TS) fuzzy models, neural networks, and sliding mode is developed. The availability of TS fuzzy models makes this fault diagnosis scheme applicable to a wider class of nonlinear systems. The proposed fault diagnosis schemes are applied to several types of satellite control systems, and the simulation results demonstrate their performance.

Download or read book Fault Diagnosis of Nonlinear Systems Using a Hybrid Approach written by Ehsan Sobhani-Tehrani and published by Springer. This book was released on 2009-06-06 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theincreasingcomplexityofspacevehiclessuchassatellites,andthecostreduction measures that have affected satellite operators are increasingly driving the need for more autonomy in satellite diagnostics and control systems. Current methods for detecting and correcting anomalies onboard the spacecraft as well as on the ground are primarily manual and labor intensive, and therefore, tend to be slow. Operators inspect telemetry data to determine the current satellite health. They use various statisticaltechniques andmodels,buttheanalysisandevaluation ofthelargevolume of data still require extensive human intervention and expertise that is prone to error. Furthermore, for spacecraft and most of these satellites, there can be potentially unduly long delays in round-trip communications between the ground station and the satellite. In this context, it is desirable to have onboard fault-diagnosis system that is capable of detecting, isolating, identifying or classifying faults in the system withouttheinvolvementandinterventionofoperators.Towardthisend,theprinciple goal here is to improve the ef?ciency, accuracy, and reliability of the trend analysis and diagnostics techniques through utilization of intelligent-based and hybrid-based methodologies.