Download or read book Sliding Mode Controllers for Power Electronic Converters written by Axaykumar Mehta and published by Springer. This book was released on 2018-12-13 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book proposes a proportional integral type sliding function, which does not facilitate the finite reaching and hence the responses of the load voltage results in an exponential steady state. To facilitate finite time reaching, it also presents the new Integral Sliding Mode Control with Finite Time Reaching (ISMCFTR). The book also extends the application of the proposed controller to another type of PEC, the DC-DC Boost converter, and also proposes the PI type sliding surface for the Zeta converter, which is non-inverting type Buck Boost converter. An important source of practical implementations, it presents practical implementations as simulation and experimental results to demonstrate the efficacy of the converter.

Download or read book Sliding Mode Control of Switching Power Converters written by Siew-Chong Tan and published by CRC Press. This book was released on 2018-09-03 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sliding Mode Control of Switching Power Converters: Techniques and Implementation is perhaps the first in-depth account of how sliding mode controllers can be practically engineered to optimize control of power converters. A complete understanding of this process is timely and necessary, as the electronics industry moves toward the use of renewable energy sources and widely varying loads that can be adequately supported only by power converters using nonlinear controllers. Of the various advanced control methods used to handle the complex requirements of power conversion systems, sliding mode control (SMC) has been most widely investigated and proved to be a more feasible alternative than fuzzy and adaptive control for existing and future power converters. Bridging the gap between power electronics and control theory, this book employs a top-down instructional approach to discuss traditional and modern SMC techniques. Covering everything from equations to analog implantation, it: Provides a comprehensive general overview of SMC principles and methods Offers advanced readers a systematic exposition of the mathematical machineries and design principles relevant to construction of SMC, then introduces newer approaches Demonstrates the practical implementation and supporting design rules of SMC, based on analog circuits Promotes an appreciation of general nonlinear control by presenting it from a practical perspective and using familiar engineering terminology With specialized coverage of modeling and implementation that is useful to students and professionals in electrical and electronic engineering, this book clarifies SMC principles and their application to power converters. Making the material equally accessible to all readers, whether their background is in analog circuit design, power electronics, or control engineering, the authors—experienced researchers in their own right—elegantly and practically relate theory, application, and mathematical concepts and models to corresponding industrial targets.

Download or read book Control Design Techniques in Power Electronics Devices written by Hebertt J. Sira-Ramirez and published by Springer Science & Business Media. This book was released on 2006-09-07 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals specifically with control theories relevant to the design of control units for switched power electronics devices, for the most part represented by DC–DC converters and supplies, by rectifiers of different kinds and by inverters with varying topologies. The theoretical methods for designing controllers in linear and nonlinear systems are accompanied by multiple case studies and examples showing their application in the emerging field of power electronics.

Download or read book Power Electronic Converters Modeling and Control written by Seddik Bacha and published by Springer Science & Business Media. This book was released on 2013-11-12 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern power electronic converters are involved in a very broad spectrum of applications: switched-mode power supplies, electrical-machine-motion-control, active power filters, distributed power generation, flexible AC transmission systems, renewable energy conversion systems and vehicular technology, among them. Power Electronics Converters Modeling and Control teaches the reader how to analyze and model the behavior of converters and so to improve their design and control. Dealing with a set of confirmed algorithms specifically developed for use with power converters, this text is in two parts: models and control methods. The first is a detailed exposition of the most usual power converter models: · switched and averaged models; · small/large-signal models; and · time/frequency models. The second focuses on three groups of control methods: · linear control approaches normally associated with power converters; · resonant controllers because of their significance in grid-connected applications; and · nonlinear control methods including feedback linearization, stabilizing, passivity-based, and variable-structure control. Extensive case-study illustration and end-of-chapter exercises reinforce the study material. Power Electronics Converters Modeling and Control addresses the needs of graduate students interested in power electronics, providing a balanced understanding of theoretical ideas coupled with pragmatic tools based on control engineering practice in the field. Academics teaching power electronics will find this an attractive course text and the practical points make the book useful for self tuition by engineers and other practitioners wishing to bring their knowledge up to date.

Download or read book Power Electronic Converters written by Eric Monmasson and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: A voltage converter changes the voltage of an electrical power source and is usually combined with other components to create a power supply. This title is devoted to the control of static converters, which deals with pulse-width modulation (PWM) techniques, and also discusses methods for current control. Various application cases are treated. The book is ideal for professionals in power engineering, power electronics, and electric drives industries, as well as practicing engineers, university professors, postdoctoral fellows, and graduate students.

Download or read book Modeling and Control of Power Electronics Converter System for Power Quality Improvements written by Sanjeet Kumar Dwivedi and published by Academic Press. This book was released on 2018-08-17 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and Control of Power Electronics Converter Systems for Power Quality Improvements provides grounded theory for the modeling, analysis and control of different converter topologies that improve the power quality of mains. Intended for researchers and practitioners working in the field, topics include modeling equations and the state of research to improve power quality converters. By presenting control methods for different converter topologies and aspects related to multi-level inverters and specific analysis related to the AC interface of drives, the book helps users by putting a particular emphasis on different control algorithms that enhance knowledge and research work. Present In-depth coverage of modeling and control methods for different converter topology Includes a particular emphasis on different control algorithms to give readers an easier understanding Provides a results and discussion chapter and MATLAB simulation to support worked examples and real-life application scenarios

Download or read book Periodic Control of Power Electronic Converters written by Keliang Zhou and published by IET. This book was released on 2016-11-23 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced power electronic converters convert, control and condition electricity. Power converters require control strategies for periodic signal compensation to assure good power quality and stable power system operation. This comprehensive text presents the most recent internal model principle based periodic control technology, which offers the perfect periodic control solution for power electronic conversion. It also provides complete analysis and synthesis methods for periodic control systems, and plenty of practical examples to demonstrate the validity of proposed periodic control technology for power converters. It proposes a unified framework for housing periodic control schemes for power converters, and provides a general proportional-integral-derivative control solution to periodic signal compensation in extensive engineering applications. Periodic Control of Power Electronic Converters is intended for engineers, researchers and students in the field of power electronics who are interested in advanced control of power converters and control specialists who like to explore new applications of control theory.

Download or read book Advanced Control Methodologies For Power Converter Systems written by Wensheng Luo and published by Springer Nature. This book was released on 2022-02-16 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to present some advanced control methodologies for power converters. Power electronic converters have become indispensable devices for plenty of industrial applications over the last decades. Composed by controllable power switches, they can be controlled by effective strategies to achieve desirable transient response and steady-state performance, to ensure the stability, reliability and safety of the system. The most popular control strategy of power converters is the linear proportional–integral–derivative series control which is adopted as industry standard. However, when there exist parameter changes, nonlinearities and load disturbances in the system, the performance of the controller will be significantly degraded. To overcome this problem, many advanced control methodologies and techniques have been developed to improve the converter performance. This book presents the research work on some advanced control methodologies for several types of power converters, including three-phase two-level AC/DC power converter, three-phase NPC AC/DC power converter, and DC/DC buck converter. The effectiveness and advantage of the proposed control strategies are verified via simulations and experiments. The content of this book can be divided into two parts. The first part focuses on disturbance observer-based control methods for power converters under investigation. The second part investigates intelligent control methods. These methodologies provide a framework for controller design, observer design, stability and performance analysis for the considered power converter systems.

Download or read book Control of Power Electronic Converters and Systems written by Frede Blaabjerg and published by Academic Press. This book was released on 2021-04-01 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Power Electronic Converters and Systems, Volume 3, explores emerging topics in the control of power electronics and converters, including the theory behind control, and the practical operation, modeling, and control of basic power system models. This book introduces the most important controller design methods, including both analog and digital procedures. This reference explains the dynamic characterization of terminal behavior for converters, as well as preserving the stability and power quality of modern power systems. Useful for engineers in emerging applications of power electronic converters and those combining control design methods into different applications in power electronics technology. Addressing controller interactions - in light of increasing renewable energy integration and related challenges with stability and power quality - is becoming more frequent in power converters and passive components. Discusses different applications and their control in integrated renewable energy systems Introduces the most important controller design methods, both in analog and digital Describes different important applications to be used in future industrial products Explains the dynamic characterization of terminal behavior for converters

Download or read book Sliding Mode Control for Synchronous Electric Drives written by Sergey E. Ryvkin and published by CRC Press. This book was released on 2011-11-21 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the theory of control systems with sliding mode applied to electrical motors and power converters. It demonstrates the methodology of control design and the original algorithms of control and observation. Practically all semiconductor devices are used in power converters, that feed electrical motors, as power switches. A switch

Download or read book Advanced Control of Electrical Drives and Power Electronic Converters written by Jacek Kabziński and published by Springer. This book was released on 2016-09-30 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume is written by key specialists working in multidisciplinary fields in electrical engineering, linking control theory, power electronics, artificial neural networks, embedded controllers and signal processing. The authors of each chapter report the state of the art of the various topics addressed and present results of their own research, laboratory experiments and successful applications. The presented solutions concentrate on three main areas of interest: · motion control in complex electromechanical systems, including sensorless control; · fault diagnosis and fault tolerant control of electric drives; · new control algorithms for power electronics converters. The chapters and the complete book possess strong monograph attributes. Important practical and theoretical problems are deeply and accurately presented on the background of an exhaustive state-of the art review. Many results are completely new and were never published before. Well-known control methods like field oriented control (FOC) or direct torque control (DTC) are referred as a starting point for modifications or are used for comparison. Among numerous control theories used to solve particular problems are: nonlinear control, robust control, adaptive control, Lyapunov techniques, observer design, model predictive control, neural control, sliding mode control, signal filtration and processing, fault diagnosis, and fault tolerant control.

Download or read book Control Circuits in Power Electronics written by Miguel Castilla and published by IET. This book was released on 2016-05-16 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Resource added for the Electronics/Biomedical Technology program 106051.

Download or read book Sliding Mode Control Methodology in the Applications of Industrial Power Systems written by Jianxing Liu and published by Springer Nature. This book was released on 2019-10-23 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advanced techniques in sliding mode control and observer design for industrial power systems, focusing on their applications in polymer electrolyte membrane fuel cells and power converters. Readers will find not only valuable new fault detection and isolation techniques based on sliding mode control and observers, but also a number of robust control and estimation methodologies combined with fuzzy neural networks and extended state observer methods. The book also provides necessary experimental and simulation examples for proton exchange membrane fuel cell systems and power converter systems. Given its scope, it offers a valuable resource for undergraduate and graduate students, academics, scientists and engineers who are working in the field.

Download or read book Control of Power Electronic Converters and Systems written by Frede Blaabjerg and published by Academic Press. This book was released on 2018-01-25 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Power Electronic Converters and Systems examines the theory behind power electronic converter control, including operation, modeling and control of basic converters. The book explores how to manipulate components of power electronics converters and systems to produce a desired effect by controlling system variables. Advances in power electronics enable new applications to emerge and performance improvement in existing applications. These advances rely on control effectiveness, making it essential to apply appropriate control schemes to the converter and system to obtain the desired performance. Discusses different applications and their control Explains the most important controller design methods both in analog and digital Describes different important applications to be used in future industrial products Covers voltage source converters in significant detail Demonstrates applications across a much broader context

Download or read book Control of Power Electronic Converters and Systems written by Frede Blaabjerg and published by Elsevier. This book was released on 2021-04-07 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Power Electronic Converters and Systems, Volume 3, explores emerging topics in the control of power electronics and converters, including the theory behind control, and the practical operation, modeling, and control of basic power system models. This book introduces the most important controller design methods, including both analog and digital procedures. This reference explains the dynamic characterization of terminal behavior for converters, as well as preserving the stability and power quality of modern power systems. Useful for engineers in emerging applications of power electronic converters and those combining control design methods into different applications in power electronics technology. Addressing controller interactions - in light of increasing renewable energy integration and related challenges with stability and power quality - is becoming more frequent in power converters and passive components. Discusses different applications and their control in integrated renewable energy systems Introduces the most important controller design methods, both in analog and digital Describes different important applications to be used in future industrial products Explains the dynamic characterization of terminal behavior for converters

Download or read book New Perspectives and Applications of Modern Control Theory written by Julio B. Clempner and published by Springer. This book was released on 2017-09-30 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited monograph contains research contributions on a wide range of topics such as stochastic control systems, adaptive control, sliding mode control and parameter identification methods. The book also covers applications of robust and adaptice control to chemical and biotechnological systems. This collection of papers commemorates the 70th birthday of Dr. Alexander S. Poznyak.

Download or read book Dynamics and Control of Switched Electronic Systems written by Francesco Vasca and published by Springer Science & Business Media. This book was released on 2012-03-28 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increased efficiency and quality constraints imposed on electrical energy systems have inspired a renewed research interest in the study of formal approaches to the analysis and control of power electronics converters. Switched systems represent a useful framework for modeling these converters and the peculiarities of their operating conditions and control goals justify the specific classification of “switched electronic systems”. Indeed, idealized switched models of power converters introduce problems not commonly encountered when analyzing generic switched models or non-switched electrical networks. In that sense the analysis of switched electronic systems represents a source for new ideas and benchmarks for switched and hybrid systems generally. Dynamics and Control of Switched Electronic Systems draws on the expertise of an international group of expert contributors to give an overview of recent advances in the modeling, simulation and control of switched electronic systems. The reader is provided with a well-organized source of references and a mathematically-based report of the state of the art in analysis and design techniques for switched power converters. Intuitive language, realistic illustrative examples and numerical simulations help the reader to come to grips with the rigorous presentation of many promising directions of research such as: converter topologies and modulation techniques; continuous-time, discrete-time and hybrid models; modern control strategies for power converters; and challenges in numerical simulation. The guidance and information imparted in this text will be appreciated by engineers, and applied mathematicians working on system and circuit theory, control systems development, and electronic and energy conversion systems design.