Download or read book Sintering of Ceramics written by Mohamed N. Rahaman and published by CRC Press. This book was released on 2007-07-06 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering of Ceramics provides the only comprehensive treatment of the theories and principles of sintering and their application to the production of advanced ceramics with the required target microstructure. Stemming from the author's bestselling text, Ceramic Processing and Sintering, this book includes additional material selected

Download or read book Sintering of Ceramics written by M. N. Rahaman and published by CRC Press. This book was released on 2008 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sinteringof Ceramics provides the only comprehensive treatment of the theories and principles of sintering and their application to the production of advanced ceramics. It identifies and examines the variables that influence densification and microstructural evolution in order to design processing conditions for achieving the required target microstructure. Each chapter includes a set of exercise problems and numerous references for further study. The book also includes approximately 25 tables, 300 figures, and 5 appendices to provide comprehensive background knowledge and data in the field.

Download or read book Ceramic Processing and Sintering written by Mohamed N. Rahaman and published by CRC Press. This book was released on 2017-12-19 with total page 963 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the field's premiere source, this reference is extensively revised and expanded to collect hard-to-find applications, equations, derivations, and examples illustrating the latest developments in ceramic processing technology. This book is concerned primarily with the processing of polycrystalline ceramics and focuses on the widespread fabrication of ceramics by the firing of consolidated powders forms. A brief treatment of sol-gel processing is also included. Ceramic Processing and Sintering, Second Edition provides clear and intensive discussions on colloidal and sol-gel processing, sintering of ceramics, and kinetic processes in materials. From powder synthesis and consolidation to sintering and densification behavior, this latest edition emphasizes the impact of each processing procedure on ceramic properties. The second edition also contains new and extended discussions on colloid stability, polymer growth and gelation, additives in ceramic forming, diffusion and defect strucutre, normal and abnormal grain growth, microwave sintering, Rayleigh instability effects, and Ostwald ripening. Illustrating the interconnectedness between the various steps in the overall fabrication route, Ceramic Processing and Sintering, Second Edition approaches the fundamental issues of each process and show how they are applied to the practical fabrication of ceramics.

Download or read book Sintering Technology written by Randall M. German and published by CRC Press. This book was released on 2020-09-30 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the sintering conference held at the Pennsylvania State University, USA, this text presents advances in the application of sintering to the most important industrial materials. It offers results on both solid-state and microphase sintering as well as microstructure evolution, and introduces new applications, processes, materials and solutions to technical problems.

Download or read book Sintering of Ceramics written by Arunachalam Lakshmanan and published by BoD – Books on Demand. This book was released on 2012-03-02 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chapters covered in this book include emerging new techniques on sintering. Major experts in this field contributed to this book and presented their research. Topics covered in this publication include Spark plasma sintering, Magnetic Pulsed compaction, Low Temperature Co-fired Ceramic technology for the preparation of 3-dimesinal circuits, Microwave sintering of thermistor ceramics, Synthesis of Bio-compatible ceramics, Sintering of Rare Earth Doped Bismuth Titanate Ceramics prepared by Soft Combustion, nanostructured ceramics, alternative solid-state reaction routes yielding densified bulk ceramics and nanopowders, Sintering of intermetallic superconductors such as MgB2, impurity doping in luminescence phosphors synthesized using soft techniques, etc. Other advanced sintering techniques such as radiation thermal sintering for the manufacture of thin film solid oxide fuel cells are also described.

Download or read book Sintering written by Suk-Joong L. Kang and published by Elsevier. This book was released on 2004-11-27 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering is the process of forming materials and components from a powder under the action of thermal energy. It is a key materials science subject: most ceramic materials and many specialist metal powder products for use in key industries such as electronics, automotive and aerospace are formed this way. Written by one of the leading experts in the field, this book offers an unrivalled introduction to sintering and sintering processes for students of materials science and engineering, and practicing engineers in industry. The book is unique in providing a complete grounding in the principles of sintering and equal coverage of the three key sintering processes: densification, grain growth and microstructure. Students and professional engineers alike will be attracted by the emphasis on developing a detailed understanding of the theory and practical processes of sintering, the balanced coverage of ceramic and metal sintering, and the accompanying examination questions with selected solutions. Delivering unrivalled depth of coverage on the basis of sintering, science, including thermodynamics and polycrystalline microstructure. Unique in its balanced coverage of the three key sintering elements - densification, grain growth and microstructure. A key reference for students and engineers in materials science and engineering, accompanied by examination questions and selected solutions.

Download or read book Sintering of Functional Materials written by Igor Shishkovsky and published by BoD – Books on Demand. This book was released on 2018-02-07 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder-based materials and treatment technologies rank high in contemporary scientific-technical progress due to their numerous significant technoeconomic qualities. Sintering of such materials allows saving on materials and lowering the cost price of the product, as well as manufacturing complex composite materials with unique combinations of qualities. Materials of record high values of some physic-mechanical and also biochemical characteristics can be obtained owing to structural peculiarities of super dispersed condition. Sintering of functional materials for innovative perspectives in automotive and aeronautical engineering, space technology, lightweight construction, mechanical engineering, modern design, and many other applications requires established relationship in the materials-process-properties system. Therefore, the industry being interested in understanding theoretical modeling, and control over behavior of such powdered materials has promoted the research activities of this manuscript's authors.

Download or read book Sintering of Advanced Materials written by Zhigang Zak Fang and published by Elsevier. This book was released on 2010-09-27 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering is a method for manufacturing components from ceramic or metal powders by heating the powder until the particles adhere to form the component required. The resulting products are characterised by an enhanced density and strength, and are used in a wide range of industries. Sintering of advanced materials: fundamentals and processes reviews important developments in this technology and its applicationsPart one discusses the fundamentals of sintering with chapters on topics such as the thermodynamics of sintering, kinetics and mechanisms of densification, the kinetics of microstructural change and liquid phase sintering. Part two reviews advanced sintering processes including atmospheric sintering, vacuum sintering, microwave sintering, field/current assisted sintering and photonic sintering. Finally, Part three covers sintering of aluminium, titanium and their alloys, refractory metals, ultrahard materials, thin films, ultrafine and nanosized particles for advanced materials.With its distinguished editor and international team of contributors, Sintering of advanced materials: fundamentals and processes reviews the latest advances in sintering and is a standard reference for researchers and engineers involved in the processing of ceramics, powder metallurgy, net-shape manufacturing and those using advanced materials in such sectors as electronics, automotive and aerospace engineering. Explores the thermodynamics of sintering including sinter bonding and densification Chapters review a variety of sintering methods including atmosphere, vacuum, liquid phase and microwave sintering Discusses sintering of a variety of materials featuring refractory metals, super hard materials and functionally graded materials

Download or read book Science of Sintering written by H. Palmour III and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, SCIENCE OF SINTERING: NEW DIRECTIONS FOR MATERIALS PROCESSING AND MICROSTRUCTURAL CONTROL, contains the edited Proceedings of the Seventh World Round Table Conference on Sintering, held in Herceg-Novi, Yugoslavia, Aug. 28 - Sept. 1, 1989. It was organized by the International Institute for the Science of Sintering (IISS), headquartered in Belgrade, Yugoslavia. Every fourth year since 1969, the Institute has organized such a Round Table Conference on Sintering; each has taken place at some selected location within Yugoslavia. A separate series of IISS Topical Sintering Symposia (Summer Schools) have also been held at four year intervals, but they have been offset by about two years, so they occur between the main Conferences. As a rule, the Topical Sintering Symposia have been devoted to more specific topics and they also take place in different countries. The aim of these Conferences and their related "Summer Schools" has been to bring together scientists from all over the world who work in various fields of science and technology concerned with sintering and sintered materials. A total of seven IISS Conferences have been held over the period 1969-1989, and they have been supplemented by the four Topical Sintering Symposia held in Yugoslavia, Poland, India and Japan (in 1975, 1979, 1983 and 1987, respectively). This most recent five day Conference addressed the fundamental scientific background as well as the technological state-of-the-art pertinent to science of sintering and high technology sintered materials.

Download or read book Sintering Applications written by Burcu Ertug and published by BoD – Books on Demand. This book was released on 2013-02-06 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering is one of the final stages of ceramics fabrication and is used to increase the strength of the compacted material. In the Sintering of Ceramics section, the fabrication of electronic ceramics and glass-ceramics were presented. Especially dielectric properties were focused on. In other chapters, sintering behaviour of ceramic tiles and nano-alumina were investigated. Apart from oxides, the sintering of non-oxide ceramics was examined. Sintering the metals in a controlled atmosphere furnace aims to bond the particles together metallurgically. In the Sintering of Metals section, two sections dealt with copper containing structures. The sintering of titanium alloys is another topic focused in this section. The chapter on lead and zinc covers the sintering in the field of extractive metallurgy. Finally two more chapter focus on the basics of sintering,i.e viscous flow and spark plasma sintering.

Download or read book Ceramic Processing written by Mohamed N. Rahaman and published by CRC Press. This book was released on 2017-07-12 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials scientists continue to develop stronger, more versatile ceramics for advanced technological applications, such as electronic components, fuel cells, engines, sensors, catalysts, superconductors, and space shuttles. From the start of the fabrication process to the final fabricated microstructure, Ceramic Processing covers all aspects of modern processing for polycrystalline ceramics. Stemming from chapters in the author's bestselling text, Ceramic Processing and Sintering, this book gathers additional information selected from many sources and review articles in a single, well-researched resource. The author outlines the most commonly employed ceramic fabrication processes by the consolidation and sintering of powders. A systematic approach highlights the importance of each step as well as the interconnection between the various steps in the overall fabrication route. The in-depth treatment of production methods includes powder, colloidal, and sol-gel processing as well as chemical synthesis of powders, forming, sintering, and microstructure control. The book covers powder preparation and characterization, organic additives in ceramic processing, mixing and packing of particles, drying, and debinding. It also describes recent technologies such as the synthesis of nanoscale powders and solid freeform fabrication. Ceramic Processing provides a thorough foundation and reference in the production of ceramic materials for advanced undergraduates and graduate students as well as professionals in corporate training or professional courses.

Download or read book Sintering Technology written by Malin Liu and published by BoD – Books on Demand. This book was released on 2018-10-31 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering technology is an old and extensive technology in many areas, and it has been used especially in ceramic fabrication. This book covers many fields, for example, the development of different sintering technologies in recent years, such as spark plasma sintering, flash sintering, microwave sintering, reaction and laser sintering, and so on, and also some special ceramic material fabrication methods and applications, such as carbon nanotubes mixed with alumina and zirconia ceramics, pure and doped zirconia, ZnO ceramic varistors, and so on.

Download or read book Ceramic Materials written by Philippe Boch and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is primarily an introduction to the vast family of ceramic materials. The first part is devoted to the basics of ceramics and processes: raw materials, powders synthesis, shaping and sintering. It discusses traditional ceramics as well as “technical” ceramics – both oxide and non-oxide – which have multiple developments. The second part focuses on properties and applications, and discusses both structural and functional ceramics, including bioceramics. The fields of abrasion, cutting and tribology illustrate the importance of mechanical properties. It also deals with the questions/answers of a ceramicist regarding electronuclear technology. As chemistry is an essential discipline for ceramicists, the book shows, in particular, what soft chemistry can contribute as a result of sol-gel methods.

Download or read book Sintered Metallic and Ceramic Materials written by Gopal S. Upadhyaya and published by Wiley. This book was released on 2000-01-21 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sintering is one of the most important industrial techniques for optimizing the capabilities of different materials and this book deals exclusively with the state-of-the-art on the processing of sintered materials, both metallic and ceramic. Emphasis is placed on on the relationship between the composition of the material, the powder processing techniques used and the properties of the materials and the applications of end products. Materials covered include: ferrous (low and high alloy steels) and nonferrous (light and heavy) alloys, rare earth intermetallics, ceramics (oxide and nonoxide) and cermets. The various applications of sintered materials in the automotive, aerospace and defence, machine tool and power industries and in magnetic, electrical, and electronic applications are discussed in the final chapter. This book will be used by engineers working with sintering techniques and sintered materials and by engineering students studying powder metallurgy. The author is internationally renowned for his work on sintering and sintered materials.

Download or read book Liquid Phase Sintering written by R.M. German and published by Springer Science & Business Media. This book was released on 2013-12-14 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past few years there has been rapid growth in the activities involving particulate materials because of recognized advantages in manufacturing. This growth is attributed to several factors; i) an increased concern over energy utilization, ii) a desire to better control microstructure in engineermg materials, iii) the need for 1mproved material economy, iv) societal and economic pressures for higher productivity and quality, v) requirements for unique property combinations for high performance applica tions, and vi) a desire for net shape forming. Accordingly, liquid phase sintering has received increased attention as part of the growth in particulate materials processing. As a consequence, the commercial applications for liquid phase sintering are expanding rapidly. This active and expanding interest is not well served by available texts. For this reason I felt it was appropriate to write this book on liquid phase sintering. The technology of liquid phase sintering IS quite old and has been in use in the ceramics industry for many centuries. However, the general perception among materials and manufacturing engineers is that liquid phase sintering is still a novel technique. I believe the diverse technological appli cations outlined in this book will dispel I such impressions. Liquid phase. sintering has great value in fabricating several unique materials to near net shapes and will continue to expand in applications as the fundamental attrib utes are better appreciated. I am personally involved with several uses for liquid phase sintering.

Download or read book Sintering Techniques of Materials written by Arunachalam Lakshmanan and published by BoD – Books on Demand. This book was released on 2015-04-01 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers new sintering techniques on ceramic materials, metals and composites as well as reprocessed PTFE. The book covers theoretical as well as experimental aspects on Spark Plasma Sintered (SPS) Porous copper, development of cutting blades with high hardness and resistance to cracking and wear, increased microhardness of austenitic steel ? TiB2 composites obtained with high pressure - high temperature sintering, Al2O3 porous body with cotton as the template and excellent thermal insulation with direct application for refractories as well as Metal matrix composites added nanostructured tantalum carbide and an overview of different sintering techniques used in powder metallurgy. Finally recycling of PTFE scrap materials using ram extrusion and compression molding is described.

Download or read book Ceramics and Composites Processing Methods written by Narottam P. Bansal and published by John Wiley & Sons. This book was released on 2012-04-17 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the latest processing and fabrication methods There is increasing interest in the application of advanced ceramic materials in diverse areas such as transportation, energy, environmental protection and remediation, communications, health, and aerospace. This book guides readers through a broad selection of key processing techniques for ceramics and their composites, enabling them to manufacture ceramic products and components with the properties needed for various industrial applications. With chapters contributed by internationally recognized experts in the field of ceramics, the book includes traditional fabrication routes as well as new and emerging approaches in order to meet the increasing demand for more reliable ceramic materials. Ceramics and Composites Processing Methods is divided into three sections: * Densification, covering the fundamentals and practice of sintering, pulsed electric current sintering, and viscous phase silicate processing * Chemical Methods, examining colloidal methods, sol-gel, gel casting, polymer processing, chemical vapor deposition, chemical vapor infiltration, reactive melt infiltration, and combustion synthesis * Physical Methods, including directional solidification, solid free-form fabrication, microwave processing, electrophoretic deposition, and plasma spraying Each chapter focuses on a particular processing method or approach. Collectively, these chapters offer readers comprehensive, state-of-the-science information on the many approaches, techniques, and methods for the processing and fabrication of advanced ceramics and ceramic composites. With its coverage of the latest processing methods, Ceramics and Composites Processing Methods is recommended for researchers and students in ceramics, materials science, structural materials, biomedical engineering, and nanotechnology.