Download or read book Singularity Methods for Rapid Design and Analysis of Cross flow Propellers and Turbines written by Bernard T. Roesler and published by . This book was released on 2017 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: In their respective quests for higher energy efficiency and greater power extraction, the marine transportation and marine hydrokinetic industries have developed a class of devices known as cross-flow propellers and turbines. To predict the performance of these devices, engineers require accurate computational models. Traditional Reynolds-averaged Navier- Stokes equation (RANS) solvers provide an accurate, detailed description of the fluid flow, but the transient solution for each design iteration often requires a number of days to complete. At the other end of the spectrum, lumped airfoil models are fast, but accuracy is limited to certain design geometries and operating conditions. This thesis applies the vortex lattice method (VLM) to the cross-flow rotor design problem, to fill the need for a computational method to analyze cross-flow rotors that is at once fast, accurate, and robust. We first explore the standard lumped airfoil model as applied to a cross-flow propeller. We perform a design study to demonstrate the applicability of the model to design a propeller for an inland waterway vessel, and we conduct a model-scale experiment of a novel propeller design in order to validate our model for the propeller case. Through comparison with RANS simulations, however, we find the lumped airfoil model to be inaccurate for the turbine case. We then present the vortex lattice method, which includes implementation features to improve accuracy and computational efficiency for the cross-flow rotor design problem. We compare our VLM results to RANS solutions to demonstrate our significant improvement over the state-of-the-art lumped airfoil methods. Finally, we investigate the sensitivity of the model to changes in each of its parameters in order to determine the robustness of our model. Throughout this thesis, we follow the cycle of engineering design to make observations of the operation of cross-flow devices, gain insights on the physical phenomena governing their operation, and incorporate those insights into our models.
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1991 with total page 1566 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wind Turbine Aerodynamics and Vorticity Based Methods written by Emmanuel Branlard and published by Springer. This book was released on 2017-04-05 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces the fundamentals of fluid-mechanics, momentum theories, vortex theories and vortex methods necessary for the study of rotors aerodynamics and wind-turbines aerodynamics in particular. Rotor theories are presented in a great level of details at the beginning of the book. These theories include: the blade element theory, the Kutta-Joukowski theory, the momentum theory and the blade element momentum method. A part of the book is dedicated to the description and implementation of vortex methods. The remaining of the book focuses on the study of wind turbine aerodynamics using vortex-theory analyses or vortex-methods. Examples of vortex-theory applications are: optimal rotor design, tip-loss corrections, yaw-models and dynamic inflow models. Historical derivations and recent extensions of the models are presented. The cylindrical vortex model is another example of a simple analytical vortex model presented in this book. This model leads to the development of different BEM models and it is also used to provide the analytical velocity field upstream of a turbine or a wind farm under aligned or yawed conditions. Different applications of numerical vortex methods are presented. Numerical methods are used for instance to investigate the influence of a wind turbine on the incoming turbulence. Sheared inflows and aero-elastic simulations are investigated using vortex methods for the first time. Many analytical flows are derived in details: vortex rings, vortex cylinders, Hill's vortex, vortex blobs etc. They are used throughout the book to devise simple rotor models or to validate the implementation of numerical methods. Several Matlab programs are provided to ease some of the most complex implementations.
Download or read book Graduate Studies written by and published by . This book was released on 1974 with total page 1270 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Engineering Index Annual written by and published by . This book was released on 1992 with total page 2264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its creation in 1884, Engineering Index has covered virtually every major engineering innovation from around the world. It serves as the historical record of virtually every major engineering innovation of the 20th century. Recent content is a vital resource for current awareness, new production information, technological forecasting and competitive intelligence. The world?s most comprehensive interdisciplinary engineering database, Engineering Index contains over 10.7 million records. Each year, over 500,000 new abstracts are added from over 5,000 scholarly journals, trade magazines, and conference proceedings. Coverage spans over 175 engineering disciplines from over 80 countries. Updated weekly.
Download or read book Twenty Second Symposium on Naval Hydrodynamics written by National Research Council and published by National Academies Press. This book was released on 2000-03-02 with total page 1039 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Twenty-Second Symposium on Naval Hydrodynamics was held in Washington, D.C., from August 9-14, 1998. It coincided with the 100th anniversary of the David Taylor Model Basin. This international symposium was organized jointly by the Office of Naval Research (Mechanics and Energy Conversion S&T Division), the National Research Council (Naval Studies Board), and the Naval Surface Warfare Center, Carderock Division (David Taylor Model Basin). This biennial symposium promotes the technical exchange of naval research developments of common interest to all the countries of the world. The forum encourages both formal and informal discussion of the presented papers, and the occasion provides an opportunity for direct communication between international peers.
Download or read book Marine Propellers and Propulsion written by John Carlton and published by Butterworth-Heinemann. This book was released on 2012-10-30 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: The early development of the screw propeller. Propeller geometry. The propeller environment. The ship wake field, propeller performance characteristics.
Download or read book Aeroacoustics of Flight Vehicles written by Harvey H. Hubbard and published by . This book was released on 1991 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flight Vehicle Aerodynamics written by Mark Drela and published by MIT Press. This book was released on 2014-02-07 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: An overview of the physics, concepts, theories, and models underlying the discipline of aerodynamics. This book offers a general overview of the physics, concepts, theories, and models underlying the discipline of aerodynamics. A particular focus is the technique of velocity field representation and modeling via source and vorticity fields and via their sheet, filament, or point-singularity idealizations. These models provide an intuitive feel for aerodynamic flow-field behavior and are the basis of aerodynamic force analysis, drag decomposition, flow interference estimation, and other important applications. The models are applied to both low speed and high speed flows. Viscous flows are also covered, with a focus on understanding boundary layer behavior and its influence on aerodynamic flows. The book covers some topics in depth while offering introductions and summaries of others. Computational methods are indispensable for the practicing aerodynamicist, and the book covers several computational methods in detail, with a focus on vortex lattice and panel methods. The goal is to improve understanding of the physical models that underlie such methods. The book also covers the aerodynamic models that describe the forces and moments on maneuvering aircraft, and provides a good introduction to the concepts and methods used in flight dynamics. It also offers an introduction to unsteady flows and to the subject of wind tunnel measurements. The book is based on the MIT graduate-level course “Flight Vehicle Aerodynamics” and has been developed for use not only in conventional classrooms but also in a massive open online course (or MOOC) offered on the pioneering MOOC platform edX. It will also serve as a valuable reference for professionals in the field. The text assumes that the reader is well versed in basic physics and vector calculus, has had some exposure to basic fluid dynamics and aerodynamics, and is somewhat familiar with aerodynamics and aeronautics terminology.
Download or read book Government Reports Annual Index written by and published by . This book was released on 1981 with total page 982 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sections 1-2. Keyword Index.--Section 3. Personal author index.--Section 4. Corporate author index.-- Section 5. Contract/grant number index, NTIS order/report number index 1-E.--Section 6. NTIS order/report number index F-Z.
Download or read book NASA SP written by and published by . This book was released on 1991 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1985 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Japanese Science and Technology written by and published by . This book was released on 1986 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aeronautical Engineering written by and published by . This book was released on 1991 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt: A selection of annotated references to unclassified reports and journal articles that were introduced into the NASA scientific and technical information system and announced in Scientific and technical aerospace reports (STAR) and International aerospace abstracts (IAA).
Download or read book Low Speed Aerodynamics written by Joseph Katz and published by Cambridge University Press. This book was released on 2001-02-05 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-speed aerodynamics is important in the design and operation of aircraft flying at low Mach number, and ground and marine vehicles. This 2001 book offers a modern treatment of the subject, both the theory of inviscid, incompressible, and irrotational aerodynamics and the computational techniques now available to solve complex problems. A unique feature of the text is that the computational approach (from a single vortex element to a three-dimensional panel formulation) is interwoven throughout. Thus, the reader can learn about classical methods of the past, while also learning how to use numerical methods to solve real-world aerodynamic problems. This second edition has a new chapter on the laminar boundary layer (emphasis on the viscous-inviscid coupling), the latest versions of computational techniques, and additional coverage of interaction problems. It includes a systematic treatment of two-dimensional panel methods and a detailed presentation of computational techniques for three-dimensional and unsteady flows. With extensive illustrations and examples, this book will be useful for senior and beginning graduate-level courses, as well as a helpful reference tool for practising engineers.
Download or read book Hydrodynamics of Pumps written by Christopher E. Brennen and published by Cambridge University Press. This book was released on 2011-03-28 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrodynamics of Pumps is a reference for pump experts and a textbook for advanced students. It examines the fluid dynamics of liquid turbomachines, particularly pumps, focusing on special problems and design issues associated with the flow of liquid through a rotating machine. There are two characteristics of a liquid that lead to problems and cause a significantly different set of concerns than those in gas turbines. These are the potential for cavitation and the high density of liquids, which enhances the possibility of damaging, unsteady flows and forces. The book begins with an introduction to the subject, including cavitation, unsteady flows and turbomachinery, basic pump design and performance principles. Chapter topics include flow features, cavitation parameters and inception, bubble dynamics, cavitation effects on pump performance, and unsteady flows and vibration in pumps - discussed in the three final chapters. The book is richly illustrated and includes many practical examples.
Download or read book High performance Ships written by Stanley W. Doroff and published by . This book was released on 1960 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt:
