Download or read book Discovery of Single Top Quark Production written by Dag Gillberg and published by Springer Science & Business Media. This book was released on 2011-01-22 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: The top quark is by far the heaviest known fundamental particle with a mass nearing that of a gold atom. Because of this strikingly high mass, the top quark has several unique properties and might play an important role in electroweak symmetry breaking—the mechanism that gives all elementary particles mass. Creating top quarks requires access to very high energy collisions, and at present only the Tevatron collider at Fermilab is capable of reaching these energies. Until now, top quarks have only been observed produced in pairs via the strong interaction. At hadron colliders, it should also be possible to produce single top quarks via the electroweak interaction. Studies of single top quark production provide opportunities to measure the top quark spin, how top quarks mix with other quarks, and to look for new physics beyond the standard model. Because of these interesting properties, scientists have been looking for single top quarks for more than 15 years. This thesis presents the first discovery of single top quark production. It documents one of the flagship measurements of the D0 experiment, a collaboration of more than 600 physicists from around the world. It describes first observation of a physical process known as “single top quark production”, which had been sought for more than 10 years before its eventual discovery in 2009. Further, his thesis describes, in detail, the innovative approach Dr. Gillberg took to this analysis. Through the use of Boosted Decision Trees, a machine-learning technique, he observed the tiny single top signal within an otherwise overwhelming background. This Doctoral Thesis has been accepted by Simon Fraser University, Burnaby, BC, Canada.
Download or read book Top Quark Pair Production written by Anna Christine Henrichs and published by Springer Science & Business Media. This book was released on 2013-10-04 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Before any kind of new physics discovery could be made at the LHC, a precise understanding and measurement of the Standard Model of particle physics' processes was necessary. The book provides an introduction to top quark production in the context of the Standard Model and presents two such precise measurements of the production of top quark pairs in proton-proton collisions at a center-of-mass energy of 7 TeV that were observed with the ATLAS Experiment at the LHC. The presented measurements focus on events with one charged lepton, missing transverse energy and jets. Using novel and advanced analysis techniques as well as a good understanding of the detector, they constitute the most precise measurements of the quantity at that time.
Download or read book Studies of Top Quark Production at written by and published by . This book was released on 2011 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: I present recent results on top quark production in pp collisions at a center of mass energy of 1.96 TeV. The studies were performed by the D0 collaboration using approximately 5 fb−1 of data taken during Run II at the Fermilab Tevatron accelerator. The top quark is the heaviest known elementary particle and completes the quark sector of the three-generation structure of the standard model (SM). It differs from the other quarks not only by its much larger mass, but also by its lifetime which is too short to build hadronic bound states. The SM predicts that top quarks are created via two independent production mechanisms at hadron colliders. The primary mode, in which a t{bar t} pair is produced from a gtt vertex via the strong interaction, was used by the D0 and CDF collaborations to establish the existence of the top quark in 1995. The second production mode of top quarks at hadron colliders is the electroweak production of a single top quark from a Wtb vertex. The predicted cross section for single top quark production is about half that of t{bar t} pairs but the signal-to-background ratio is much worse; observation of single top quark production has therefore until recently been impeded by its low rate and difficult background environment compared to the top pair production. In the following sections I will present results for the measurement of the t{bar t} pair and the single top quark production cross section using respectively 5.3 fb−1 and 5.4 fb−1 of data taken by the D0 experiment.
Download or read book Physics of Single top Quark Production at Hadron Colliders written by Doulgas Olaf Carlson and published by . This book was released on 1995 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Measurement of the Single Top Quark Production Cross Section and written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: An updated measurement of the single top quark production cross section is presented using the full data set collected by the Collider Detector at Fermilab (CDF), corresponding to 9.5 fb-1 of integrated luminosity from proton-antiproton collisions at 1.96 TeV center-of-mass energy. The events selected contain an imbalance in the total transverse momentum, jets identified as containing b quarks, and no identified leptons. The sum of the s- and t-channel single top quark cross sections is measured to be 3.53-1.16+1.25 pb and a lower limit on the magnitude of the top-to-bottom quark coupling,
Download or read book Observation of Single Top Quark Production written by and published by . This book was released on 2009 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author reports on the observation of electroweak production of single top quarks in p{bar p} collisions at (square root)s = 1.96 Tev using 2.3 fb−1 of data collected with the D0 detector at the fermilab Tevatron Collider. Using events containing an isolated electron or muon, missing transverse energy, two, three or four jets, with one or two of them identified as originating from the fragmentation of a b quark, the measured cross section for the process p{bar p} --> tb + X, tqb + X is 3.94 ± 0.88 pb (for a top quark mass of 170 GeV). the probability to measure a cross section at this value or higher in the absence of signal is 2.5 x 10−7, corresponding to a 5.0 standard deviation significance. Using the same dataset, the measured cross sections for the t- and the s-channel processes when determined simultaneously with no assumption on their relative production rate are 3.14{sub -0.80}{sup +0.94} pb and 1.05 ± 0.81 pb respectively, consistent with standard model expectations. The measured t-channel cross section has a significance of 4.8 standard deviations, representing the first evidence for the production of an individual single top process to be detected.
Download or read book Higher Order QCD Corrections to Single Top Quark Production written by Mohammad Assadsolimani and published by disserta Verlag. This book was released on 2014-08 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is known that the LHC has a considerable discovery potential because of its large centre-of-mass energy (vs =14 TeV) and the high design luminosity. In addition, the two experiments ATLAS and CMS perform precision measurements for numerous models in physics. The increasing experimental precision demands an even higher level of accuracy on the theoretical side. For a more precise prediction of outcomes, one has to consider the corrections obtained typically from Quantum Chromodynamics (QCD). The calculation of these corrections in the high energy regime is described by perturbation theory. In the present study, multi-loop calculations in QCD, including in particular two-loop corrections for single top quark production, are considered. There are several phenomenological motivations to study single top quark production: Firstly, the process is sensitive to the electroweak Wtb-vertex; moreover, non-standard couplings can hint at physics beyond the Standard Model. Secondly, the t-channel cross section measurement provides information on the b-quark Parton Distribution Functions (PDF). Finally, single top quark production enables us to directly measure the Cabibbo-Kobayashi-Maskawa(CKM) matrix element Vtb. The next-to-next-to-leading-order (NNLO) calculation of the single top quark production has many building blocks. In this study, two blocks will be presented: one-loop corrections squared and two-loop corrections interfered with Born. Initially, the one-loop squared contribution at NNLO for single top quark production will be calculated. Before we begin with the calculation of the two-loop corrections to single top quark production, we calculate the QCD form factors of heavy quarks at NNLO, along with the axial vector coupling as a first independent check. A comparison with the relevant literature suggests that this approach is in line with generally accepted procedure. This consistency check provides a proof of the validity of our setup. In the next step, the two-loop corrections to single top quark production will be calculated. After reducing all occurring tensor integrals to scalar integrals, we apply the integration by parts method (IBP) to find the master integrals. This step is a major challenge compared to all similar calculations because of the number of variables in the problem (two Mandelstam variables s and t, the dimension d and the mass of the top quark mt as well as the mass of the W boson mw). Finally, the calculation of the three kinds of topologies – vertex corrections, double boxes and non-planar double boxes – in the two-loop contribution at NNLO calculation will be presented.
Download or read book Search for Single Top Quark Production at D0 in Run II written by Reinhard Schwienhorst and published by . This book was released on 2005 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: I present a comprehensive search for electroweak production of single top quarks in Run II at the Fermilab Tevatron at {radical}s =1.96TeV. Using 230 pb{sup -1} of data collected with the D0 experiment, searches for s-channel and t-channel single top quark production have been carried out in the electron+jets and muon+jets decay channels using secondary-vertex b-quark tagging to select signal-like events. A binned likelihood has been constructed from the outputs of neural networks in order to maximize the sensitivity to single top quark production. No evidence for a single top quark signal is found. However, the 95% confidence level upper limits on the production cross section of 6.4 pb in the s-channel and 5.0 pb in the t-channel are improvements over previous limits by a factor of two and are approaching the cross section region predicted by the standard model.
Download or read book Measurement of the Single Top Quark Production Cross Section and math Display written by and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Measurements of Single Top Quark Production Cross Sections and written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: We present measurements of production cross sections of single top quarks in pp collisions at √s = 1.96 TeV in a data sample corresponding to an integrated luminosity of 5.4 fb-1 collected by the D0 detector at the Fermilab Tevatron Collider. We select events with an isolated electron or muon, an imbalance in transverse energy, and two, three, or four jets, with one or two of them containing a bottom hadron. We obtain an inclusive cross section of ?(pp → tb + X, tqb + X) = 3.43-0.74+0.73 pb and use it to extract the CKM matrix element 0.79
Download or read book Single Top Quark Production at written by and published by . This book was released on 2008 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: We present first evidence for the production of single top quarks at the Fermilab Tevatron p{bar p} collider. Using a 0.9 fb−1 dataset, we apply a multivariate analysis to separate signal from background and measure cross section for single top quark production. We use the cross section measurement to directly determine the CKM matrix element that describes the Wtb coupling. We also present results of W0 and charged Higgs searches with the same final states as standard model single top quark production.
Download or read book Measurement of the Single Top Quark Production Cross Section at sqrt s written by and published by . This book was released on 2011 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the standard model top quarks are predicted to be most often produced in pairs via the strong interaction. However they can also be produced singly through the weak interation. This is a rarer process with many experimental challenges. It is interesting because it provides a new window to search for evidence of physics beyond the standard model picture, such as a fourth generation of quarks or to search for insight into the Higgs Mechanism. Single top production also provides a direct way to calculate the CKM matrix element Vtb. This thesis presents new measurements for single top quark production in the s+t, s and t channels using 5.4 fb-1 of data collected at the DØ detector at Fermilab in Batavia, IL. The analysis was performed using Boosted decision trees to separate signal from background and Bayesian statistcs to calculate all the cross sections.
Download or read book Measurement of the Electroweak Single Top Quark Production Cross Section and the CKM Matrix Element written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The establishment of the electroweak single top quark production at CDF is experimentally challenging. The small single top signal hidden under large uncertain background processes makes it necessary an excellent understanding of the detector and a detailed study of the processes involved. Moreover, simple counting experiments are not sufficient to extract enough information from the candidate event sample and multivariate analysis techniques are crucial to distinguish signal from background. This thesis presents the world's most sensitive individual search, together with CDF's Neural Network analysis, for the combined s- and t-channel single top production. This analysis uses a dataset that corresponds to an integrated luminosity of 3.2fb-1, and is based on a Boosted Decision Tree method that combines information from several input variables to construct a final powerful discriminant, reaching a sensitivity to the combined single top quark production equivalent to 5.2[sigma]. The measured combined single top quark production cross section is 2.1+0.7 -0.6 pb assuming a top quark mass of 175 GeV/c2. The probability that this result comes from a background-only fluctuation (p-value) is 0.0002, which corresponds to 3.5[sigma].
Download or read book Measurement of the T channel Single Top Quark Production Cross Section written by and published by . This book was released on 2009 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: The D0 collaboration reports direct evidence for electroweak production of single top quarks through the t-channel exchange of a virtual W boson. This is the first analysis to isolate an individual single top quark production channel. We select events containing an isolated electron or muon, missing transverse energy, and two, three or four jets from 2.3 fb−1 of p{bar p} collisions at the Fermilab Tevatron Collider. One or two of the jets are identified as containing a b hadron. We combine three multivariate techniques optimized for the t-channel process to measure the t- and s-channel cross sections simultaneously. We measure cross sections of 3.14{sub -0.80}{sup +0.94} pb for the t-channel and 1.05 ± 0.81 pb for the s-channel. The measured t-channel result is found to have a significance of 4.8 standard deviations and is consistent with the standard model prediction.
Download or read book Evidence for Single Top Quark Production at written by and published by . This book was released on 2007 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: The results of the first analysis to show evidence for production of single top quarks are presented. Using 0.9 fb-1 of data collected with the D0 detector at the Fermilab Tevatron, the analysis is performed in the electron jets and muon jets decay modes, taking special care in modeling the large backgrounds, applying a new powerful b-quark tagging algorithm and using three multivariate techniques to extract the small signal in the data. The combined measured production cross section is 4.8 +- 1.3 pb. The probability to measure a cross section at this value or higher in the absence of a signal is 0.027%, corresponding to a 3.5 standard deviation significance.
Download or read book Summary of Single Top Quark Production at the Tevatron written by and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The production of single-top quarks occurs via the weak interaction at the Fermilab Tevatron proton-antiproton collider. Single top quark events are selected in the lepton+jets final state by CDF and D0 and in the missing transverse energy plus jets final state by CDF. Multivariate classifiers separate the s-channel and t-channel single-top signals from the large backgrounds. The combination of CDF and D0 results leads to the first observation of the s-channel mode of single top quark production. The t-channel and single top combined cross sections have also been measured.
Download or read book Observation of Electroweak Single Top Quark Production with the CDF II Experiment written by and published by . This book was released on 2009 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: The standard model of elementary particle physics (SM) predicts, besides the top-quark pair production via the strong interaction, also the electroweak production of single top-quarks [19]. Up to now, the Fermilab Tevatron proton-antiproton-collider is the only place to produce and study top quarks emerging from hadron-hadron-collisions. Top quarks were directly observed in 1995 during the Tevatron Run I at a center-of-mass energy of √s = 1.8 TeV simultaneously by the CDF and D0 Collaborations via the strong production of top-quark pairs. Run II of the Tevatron data taking period started 2001 at √s = 1.96 TeV after a five year upgrade of the Tevatron accelerator complex and of both experiments. One main component of its physics program is the determination of the properties of the top quark including its electroweak production. Even though Run II is still ongoing, the study of the top quark is already a successful endeavor, confirmed by dozens of publications from both Tevatron experiments. A comprehensive review of top-quark physics can be found in reference. The reasons for searching for single top-quark production are compelling. As the electroweak top-quark production proceeds via a Wtb vertex, it provides the unique opportunity of the direct measurement of the CKM matrix element.
