Download or read book Single sided NMR in the Context of Experimental and Numerical Investigation of Newtonian and Non Newtonian Fluids Flow in Porous Media written by Behzad Mohebbi and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rheology and Non Newtonian Fluids written by Fridtjov Irgens and published by Springer Science & Business Media. This book was released on 2013-07-25 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a brief but thorough introduction to the fascinating subject of non-Newtonian fluids, their behavior and mechanical properties. After a brief introduction of what characterizes non-Newtonian fluids in Chapter 1 some phenomena characteristic of non-Newtonian fluids are presented in Chapter 2. The basic equations in fluid mechanics are discussed in Chapter 3. Deformation kinematics, the kinematics of shear flows, viscometric flows, and extensional flows are the topics in Chapter 4. Material functions characterizing the behavior of fluids in special flows are defined in Chapter 5. Generalized Newtonian fluids are the most common types of non-Newtonian fluids and are the subject in Chapter 6. Some linearly viscoelastic fluid models are presented in Chapter 7. In Chapter 8 the concept of tensors is utilized and advanced fluid models are introduced. The book is concluded with a variety of 26 problems. Solutions to the problems are ready for instructors
Download or read book Two Phase Flow Measurements by Nuclear Magnetic Resonance NMR written by and published by . This book was released on 2006 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: In concentrated suspensions, there is a tendency for the solid phase to migrate from regions of high shear rate to regions of low shear (Leighton & Acrivos, 1987). In the early years that our effort was funded by the DOE Division of Basic Energy Science, quantitative measurement of this process in neutrally buoyant suspensions was a major focus (Abbott, et al., 1991; Altobelli, et al., 1991). Much of this work was used to improve multi-phase numerical models at Sandia National Laboratories. Later, our collaborators at Sandia and the University of New Mexico incorporated body forces into their numerical models of suspension flow (Rao, Mondy, Sun, et al., 2002). We developed experiments that allow us to study flows driven by buoyancy, to characterize these flows in well-known and useful engineering terms (Altobelli and Mondy, 2002) and to begin to explore the less well-understood area of flows with multiple solid phases (Beyea, Altobelli, et al., 2003). We also studied flows that combine the effects of shear and buoyancy, and flows of suspensions made from non-Newtonian liquids (Rao, Mondy, Baer, et al, 2002). We were able to demonstrate the usefulness of proton NMR imaging of liquid phase concentration and velocity and produced quantitative data not obtainable by other methods. Fluids flowing through porous solids are important in geophysics and in chemical processing. NMR techniques have been widely used to study liquid flow in porous media. We pioneered the extension of these studies to gas flows (Koptyug, et al, 2000, 2000, 2001, 2002). This extension allows us to investigate a wider range of Peclet numbers, and to gather data on problems of interest in catalysis. We devised two kinds of NMR experiments for three-phase systems. Both experiments employ two NMR visible phases and one phase that gives no NMR signal. The earlier method depends on the two visible phases differing in a NMR relaxation property. The second method (Beyea, Altobelli, et al., 2003) uses two different nuclei, protons and 19F. It also uses two different types of NMR image formation, a conventional spin-echo and a single-point method. The single-point method is notable for being useful for imaging materials which are much more rigid than can usually be studied by NMR imaging. We use it to image "low density" polyethylene (LDPE) plastic in this application. We have reduced the imaging time for this three-phase imaging method to less than 10 s per pair of profiles by using new hardware. Directly measuring the solid LDPE signal was a novel feature for multi-phase flow studies. We also used thermally polarized gas NMR (as opposed to hyper-polarized gas) which produces low signal to noise ratios because gas densities are on the order of 1000 times smaller than liquid densities. However since we used multi-atom molecules that have short T1's and operated at elevated pressures we could overcome some of the losses. Thermally polarized gases have advantages over hyperpolarized gases in the ease of preparation, and in maintaining a well-defined polarization. In these studies (Codd and Altobelli, 2003), we used stimulated echo sequences to successfully obtain propagators of gas in bead packs out to observation times of 300 ms. Zarraga, et al. (2000) used laser-sheet profilometry to investigate normal stress differences in concentrated suspensions. Recently we developed an NMR imaging analog for comparison with numerical work that is being performed by Rekha Rao at Sandia National Laboratories (Rao, Mondy, Sun, et al, 2002). A neutrally buoyant suspension of 100 mm PMMA spheres in a Newtonian liquid was sheared in a vertical Couette apparatus inside the magnet. The outer cylinder rotates and the inner cylinder is fixed. At these low rotation rates, the free-surface of the Newtonian liquid shows no measurable deformation, but the suspension clearly shows its non-Newtonian character.
Download or read book Diffusion NMR of Confined Systems written by Rustem Valiullin and published by Royal Society of Chemistry. This book was released on 2016-12-13 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the increasing role of porous solids in conventional and newly emerging technologies, there is an urgent need for a deeper understanding of fluid behaviour confined to pore spaces of these materials especially with regard to their transport properties. From its early years, NMR has been recognized as a powerful experimental technique enabling direct access to this information. In the last two decades, the methodological development of different NMR techniques to assess dynamic properties of adsorbed ensembles has been progressed. This book will report on these recent advances and look at new broader applications in engineering and medicine. Having both academic and industrial relevance, this unique reference will be for specialists working in the research areas and for advanced graduate and postgraduate studies who want information on the versatility of diffusion NMR.
Download or read book NMR Studies of Translational Motion written by William S. Price and published by Cambridge University Press. This book was released on 2009-07-30 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overview of NMR theory and applications in fluid systems, fully referenced for research use.
Download or read book Solid State NMR written by Klaus Müller and published by John Wiley & Sons. This book was released on 2021-06-23 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid State NMR A thorough and comprehensive textbook covering the theoretical background, experimental approaches, and major applications of solid-state NMR spectroscopy Nuclear Magnetic Resonance (NMR) spectroscopy is a powerful non-destructive technique capable of providing information about the molecular structure and dynamics of molecules. Alongside solution-state NMR, a well-established technique to study chemical structures and investigate physico-chemical properties of molecules in solutions, solid-state NMR (SSNMR) offers many exciting possibilities for the analysis of solid and soft materials across scientific fields. SSNMR shows unique capabilities for a detailed investigation of structural and dynamic properties of materials over wide space and time ranges. For this reason, and thanks to significant advances in the past several years, the application of SSNMR to materials is rapidly increasing in disciplines such as chemistry, physics, and materials and life sciences. Solid State NMR: Principles, Methods, and Applications offers a systematic introduction to the theory, methodological concepts, and major experimental methods of SSMR spectroscopy. Exploring the unique potential of SSNMR for the structural and dynamic characterization of soft and either amorphous or crystalline solid materials, this comprehensive textbook provides foundational knowledge and recent developments of SSNMR, covering physical and theoretical background, experimental methods, and applications to pharmaceuticals, polymers, inorganic and hybrid materials, liquid crystals, and model membranes. Written by two expert authors to ensure a clear and consistent presentation of the subject, this textbook: Includes a brief introduction to the historical aspects and broad theoretical background of solid-state NMR spectroscopy Provides helpful illustrations to explain the various SSNMR concepts and methods Features accessible descriptive text with self-consistent use of quantum mechanics Covers the experimental aspects of SSNMR spectroscopy and in particular a description of many useful pulse sequences Contains references to relevant literature Solid State NMR: Principles, Methods, and Applications is the ideal textbook for university courses on SSNMR, advanced spectroscopies, and a valuable single-volume reference for spectroscopists, chemists, and researchers in the field of materials.
Download or read book NMR Imaging and Hydrodynamic Analysis of Neutrally Buoyant Non Newtonian Slurry Flows written by and published by . This book was released on 1995 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: The flow of solids loaded suspension in cylindrical pipes has been the object of intense experimental and theoretical investigations in recent years. These types of flows are of great interest in chemical engineering because of their important use in many industrial manufacturing processes. Such flows are for example encountered in the manufacture of solid-rocket propellants, advanced ceramics, reinforced polymer composites, in heterogenous catalytic reactors, and in the pipeline transport of liquid-solids suspensions. In most cases, the suspension microstructure and the degree of solids dispersion greatly affect the final performance of the manufactured product. For example, solid propellant pellets need to be extremely-well dispersed in gel matrices for use as rocket engine solid fuels. The homogeneity of pellet dispersion is critical to allow good uniformity of the burn rate, which in turn affects the final mechanical performance of the engine. Today's manufacturing of such fuels uses continuous flow processes rather than batch processes. Unfortunately, the hydrodynamics of such flow processes is poorly understood and is difficult to assess because it requires the simultaneous measurements of liquid/solids phase velocities and volume fractions. Due to the recent development in pulsed Fourier Transform NMR imaging, NMR imaging is now becoming a powerful technique for the non intrusive investigation of multi-phase flows. This paper reports and exposes a state-of-the-art experimental and theoretical methodology that can be used to study such flows. The hydrodynamic model developed for this study is a two-phase flow shear thinning model with standard constitutive fluid/solids interphase drag and solids compaction stresses. this model shows good agreement with experimental data and the limitations of this model are discussed.
Download or read book An Introduction to Reservoir Simulation Using MATLAB GNU Octave written by Knut-Andreas Lie and published by Cambridge University Press. This book was released on 2019-08-08 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents numerical methods for reservoir simulation, with efficient implementation and examples using widely-used online open-source code, for researchers, professionals and advanced students. This title is also available as Open Access on Cambridge Core.
Download or read book NMR of Ordered Liquids written by E.E. Burnell and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: NMR of Ordered Liquids gives a unique overview of the scope and limitations of the NMR of oriented liquids, based on contributions from acknowledged experts in the field. The book consists of four sections: -detailed general introduction which covers the basic principles and sophisticated experimental techniques; -wide variety of applications ranging from NMR studies of small atoms and molecules in anisotropic liquids to the utilization of residual dipolar couplings for structure determination of biological molecules; -summary of the sophisticated theoretical treatments, computer simulations, and phenomenological models for anisotropic intermolecular interactions that are widely used in the analysis of experimental results; -overview of the dynamical aspects and relaxation processes relevant for orientationally ordered molecules.
Download or read book Multidimensional NMR in Liquids written by Frank J. M. van de Ven and published by Wiley-VCH. This book was released on 1995 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multidimensional NMR in Liquids offers a lucid treatment of basic NMR phenomena, building up to today's most sophisticated NMR experiments from first principles. Using easy-to-grasp product-operator formalism, diagrams, and practical examples, one-, two-, and N-dimensional NMR experiments are explained with minimal recourse to quantum mechanics.
Download or read book Solid State NMR written by David C. Apperley and published by Momentum Press. This book was released on 2012-06-10 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The power of nuclear magnetic resonance, NMR, for characterizing molecules dissolved in solution is widely acknowledged and NMR forms an essential component of undergraduate chemistry degrees. However, the application of NMR to the solid state is much less well appreciated. This text sets out the fundamental principles of solid-state NMR, explaining how NMR in solids differs from that in solution, showing how the various interactions of NMR can be manipulated to yield high-resolution spectra and to give information on local structure and dynamics in solids. This book aims to take some of the mystique out of solid-state NMR by providing a comprehensible discussion of the methodology, including the basic concepts and a practical guide to implementation of the experiments. A basic knowledge of solution-state NMR is assumed and is only briefly covered. The text is intended for those in academia and industry expecting to use solid-state NMR in their research and looking for an accessible introduction to the field. It will also be valuable for non-experts interested in learning how NMR can be usefully applied to solid systems. Detailed mathematical treatments are delayed to a chapter at the mid-point of the text and can be skipped. Introductions to experiments and numerical simulations are provided to help link NMR results to experimental practice. The different aspects of solid-state NMR, from basic pulse-and-acquire experiments to sophisticated techniques for the measurement of anisotropy information are presented. Examples illustrate the wide variety of applications of the technique and its complementarity to other solid-state characterization techniques such as X-ray diffraction. Various aspects of NMR crystallography are covered as are topics of motion in solids.
Download or read book Determining NMR Relaxation Times for Porous Media written by Yijia Li and published by . This book was released on 2007 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis provides an introduction to and analysis of the problem of determining nuclear magnetic resonance (NMR) relaxation times of porous media by using the so-called Carr-Purcell-Meiboom-Gill (CPMG) technique. We introduce the principles of NMR, the CPMG technique and the signals produced, porous effects on the NMR relaxation times and discuss various numerical methods for the inverse problem of extracting the relaxation times from CPMG signals. The numerical methods for solving Fredholm integral equations of the first kind are sketched from a series expansion perspective. A method of using arbitrary constituent functions for improving the performance of non-negative least squares (NNLS) is developed and applied to several synthesized data sets and real experimental data sets of saturated porous glass gels. The data sets were obtained by the author of this thesis and the experimental procedure will be presented. We discuss the imperfections in the assumptions on the physical and numerical models, the numerical schemes, and the experimental results, which may lead to new research possibilities.
Download or read book Fluids in Porous Media written by Henk Huinink and published by Morgan & Claypool Publishers. This book was released on 2016-09-06 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the reader into the field of the physics of processes occurring in porous media. It targets Master and PhD students who need to gain fundamental understanding the impact of confinement on transport and phase change processes. The book gives brief overviews of topics like thermodynamics, capillarity and fluid mechanics in order to launch the reader smoothly into the realm of porous media. In-depth discussions are given of phase change phenomena in porous media, single phase flow, unsaturated flow and multiphase flow. In order to make the topics concrete the book contains numerous example calculations. Further, as much experimental data as possible is plugged in to give the reader the ability to quantify phenomena.
Download or read book Solid State NMR in Materials Science written by Vladimir I. Bakhmutov and published by CRC Press. This book was released on 2016-04-19 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid-state NMR is a powerful physical method widely applied in modern fundamental and applied science, medicine, and industry. Its role is particularly valuable in materials chemistry due to the capability of solid-state NMR to rapidly solve tasks connected with structural descriptions of complex systems on macro and/or molecular levels, and the i
Download or read book NMR Imaging Techniques and Applications in the Flow Behavior of Fluids in Porous Media written by Hassan I. Halimi and published by . This book was released on 1990 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fluid Flow in Fractured Porous Media written by Richeng Liu and published by MDPI. This book was released on 2019-09-30 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fluid flow in fracture porous media plays a significant role in the assessment of deep underground reservoirs, such as through CO2 sequestration, enhanced oil recovery, and geothermal energy development. Many methods have been employed—from laboratory experimentation to theoretical analysis and numerical simulations—and allowed for many useful conclusions. This Special Issue aims to report on the current advances related to this topic. This collection of 58 papers represents a wide variety of topics, including on granite permeability investigation, grouting, coal mining, roadway, and concrete, to name but a few. We sincerely hope that the papers published in this Special Issue will be an invaluable resource for our readers.
Download or read book Solid state Nmr written by and published by ICON Group International. This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
