Download or read book Single molecule Target Sequence Detection Via Microfluidic Planar Extensional Flow at a Stagnation Point written by Rebecca Jeanne Dylla-Spears and published by . This book was released on 2009 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Open Space Microfluidics written by Emmanuel Delamarche and published by John Wiley & Sons. This book was released on 2018-01-18 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizing the latest trends and the current state of this research field, this up-to-date book discusses in detail techniques to perform localized alterations on surfaces with great flexibility, including microfluidic probes, multifunctional nanopipettes and various surface patterning techniques, such as dip pen nanolithography. These techniques are also put in perspective in terms of applications and how they can be transformative of numerous (bio)chemical processes involving surfaces. The editors are from IBM Zurich, the pioneers and pacesetters in the field at the forefront of research in this new and rapidly expanding area.
Download or read book Micro Nanofluidics and Lab on Chip Based Emerging Technologies for Biomedical and Translational Research Applications Part A written by and published by Academic Press. This book was released on 2022-01-13 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro/Nanofluidics and Lab-on-Chip Based Emerging Technologies for Biomedical and Translational Research Applications, Volume 185, Part A represents the collation of chapters written by eminent scientists worldwide. Chapters in this updated release include An introduction to microfluidics and their applications, Design and fabrication of Micro/Nanofluidics devices and systems, Detection and separation of proteins using Micro/Nanofluidics devices, Micro/Nanofluidics devices for DNA/RNA detection and separation, Paper based microfluidics a forecast towards the most affordable and rapid point-of-care devices, Paper based micro/Nanofluidics devices for biomedical applications, Advances of Microfluidics Devices and their Applications in Personalized Medicine, and much more. Additional chapters cover Microfluidics for single cell analysis, Fluorescence Based Miniaturized Microfluidic and Nanofluidic Systems for Biomedical Applications, Active Matter Dynamics in Confined Microfluidic Environments, Challenges and opportunities in micro/nanofluidics and lab-on-a-chip, and Paper-microfluidic signal-enhanced immunoassays. Offers basic understanding of the state-of-the-art design and fabrication of microfluidics/ nanofluidics and lab-on-chip Explains how to develop microfluidics/nanofluidics for biomedical application such as high throughout biological screening and separation Discusses the applications, challenges and opportunities in biomedical and translational research applications of microfluidics/nanofluidics
Download or read book Open Space Microfluidics written by Emmanuel Delamarche and published by John Wiley & Sons. This book was released on 2018-01-18 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizing the latest trends and the current state of this research field, this up-to-date book discusses in detail techniques to perform localized alterations on surfaces with great flexibility, including microfluidic probes, multifunctional nanopipettes and various surface patterning techniques, such as dip pen nanolithography. These techniques are also put in perspective in terms of applications and how they can be transformative of numerous (bio)chemical processes involving surfaces. The editors are from IBM Zurich, the pioneers and pacesetters in the field at the forefront of research in this new and rapidly expanding area.
Download or read book CMOS Biotechnology written by Hakho Lee and published by Springer Science & Business Media. This book was released on 2007-05-04 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lately, there has been a growing interest in exploiting the benefits of the ICs for areas outside of the traditional application spaces. One noteable area is found in biology Bioanalytical instruments have been miniaturized on ICs to study various biophenomena or to actuate biosystems. These biolab-on-IC systems utilize the IC to facilitate faster, repeatable, and standardized biological experiments at low cost with a small volume of biological sample. The research activities in this field are expected to enjoy substantial growth in the foreseeable future. BioCMOS Technologies reviews these exciting recent efforts in joining CMOS technology with biology.
Download or read book Flowing Matter written by Federico Toschi and published by Springer Nature. This book was released on 2019-09-25 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book, published in the Soft and Biological Matter series, presents an introduction to selected research topics in the broad field of flowing matter, including the dynamics of fluids with a complex internal structure -from nematic fluids to soft glasses- as well as active matter and turbulent phenomena. Flowing matter is a subject at the crossroads between physics, mathematics, chemistry, engineering, biology and earth sciences, and relies on a multidisciplinary approach to describe the emergence of the macroscopic behaviours in a system from the coordinated dynamics of its microscopic constituents. Depending on the microscopic interactions, an assembly of molecules or of mesoscopic particles can flow like a simple Newtonian fluid, deform elastically like a solid or behave in a complex manner. When the internal constituents are active, as for biological entities, one generally observes complex large-scale collective motions. Phenomenology is further complicated by the invariable tendency of fluids to display chaos at the large scales or when stirred strongly enough. This volume presents several research topics that address these phenomena encompassing the traditional micro-, meso-, and macro-scales descriptions, and contributes to our understanding of the fundamentals of flowing matter. This book is the legacy of the COST Action MP1305 “Flowing Matter”.
Download or read book Polymer Colloids written by Rodney Priestley and published by Royal Society of Chemistry. This book was released on 2019-12-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Academic and industrial research around polymer-based colloids is huge, driven both by the development of mature technologies, e.g. latexes for coatings, as well as the advancement of new materials and applications, such as building blocks for 2D/3D structures and medicine. Edited by two world-renowned leaders in polymer science and engineering, this is a fundamental text for the field. Based on a specialised course by the editors, this book provides the reader with an invaluable single source of reference. The first section describes formation, explaining basic properties of emulsions and dispersion polymerization, microfluidic approaches to produce polymer-based colloids and formation via directed self-assembly. The next section details characterisation methodologies from microscopy and small angle scattering, to surface science and simulations. The final chapters close with applications, including Pickering emulsions and molecular engineering for materials development. A comprehensive guide to polymer colloids, with contributions by leaders in their respective areas, this book is a must-have for researchers and practitioners working across polymers, soft matter and chemical and molecular engineering.
Download or read book Microfluidics and Nanofluidics written by Mohsen Sheikholeslami Kandelousi and published by BoD – Books on Demand. This book was released on 2018-08-22 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the present book, various applications of microfluidics and nanofluidics are introduced. Microfluidics and nanofluidics span a broad array of disciplines including mechanical, materials, and electrical engineering, surface science, chemistry, physics and biology. Also, this book deals with transport and interactions of colloidal particles and biomolecules in microchannels, which have great importance to many microfluidic applications, such as drug delivery in life science, microchannel heat exchangers in electronic cooling, and food processing industry. Furthermore, this book focuses on a detailed description of the thermal transport behavior, challenges and implications that involve the development and use of HTFs under the influence of atomistic-scale structures and industrial applications.
Download or read book High Performance and Specialty Fibers written by Japan The Society of Fiber Science and Techno and published by Springer. This book was released on 2016-08-16 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the key technologies and characteristics of the modern man-made specialty fibers mainly developed in Japan. Since the production of many low-cost man-made fibers shifted to China and other Asian countries, Japanese companies have focused on production of high-quality, high-performance super fibers as well as highly functionalized fibers so-called ‘Shin-gosen’. ZylonTM and DyneemaTM manufactured by Toyobo, TechnoraTM produced by Teijin, and VectranTM developed by Kuraray are those examples of super fibers. Carbon fibers ToraycaTM from Toray have occupied the most advanced high-performance application area. Various types of polyester fibers having design-shaped cross-sections and special fiber morphologies and those showing specific physico-chemical properties have also been developed to acquire a high-value textile market of the world. This book describes how these high-tech fibers have been developed and what aspects are the most important in each fiber based on its structure-property relationship. Famous specialists both in industry and academia are responsible for the contents, explaining the design concepts and the special technologies for the production of these special fibers. For university teachers and students, this volume is an excellent textbook that elucidates the basic concepts of modern fibers. At the same time, researchers, both in academia and industry, will find a comprehensive overview of recent man-made fibers. This publication, presenting the most easily understandable general survey of specialty man-made fibers to date, is dedicated to the 70th-anniversary of the Society of Fiber Science and Technology, Japan.
Download or read book Optical Rheometry of Complex Fluids written by Gerald G. Fuller and published by Oxford University Press. This book was released on 1995-06-29 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a self-contained presentation of optical methods used to measure the structure and dynamics of complex fluids subject to the influence of external fields. Such fields--hydrodynamic, electric, and magnetic--are commonly encountered in both academic and industrial research, and can produce profound changes in the microscale properties of liquids comprised of polymers, colloids, liquid crystals, or surfactants. Starting with the basic Maxwell field equations, this book discusses the polarization properties of light, including Jones and Mueller calculus, and then covers the transmission, reflection, and scattering of light in anisotropic materials. Spectroscopic interactions with oriented systems such as absorptive dichroism, small wide angle light scattering, and Raman scattering are discussed. Applications of these methods to a wide range of problems in complex fluid dynamics and structure are presented, along with selected case studies chosen to elucidate the range of techniques and materials that can be studied. As the only book of its kind to present a self-contained description of optical methods used for the full range of complex fluids, this work will be special interest to a wide range of readers, including chemical engineers, physical chemists, physicists, polymer and colloid scientists, along with graduate and post-graduate researchers.
Download or read book Microtechnology for Cell Manipulation and Sorting written by Wonhee Lee and published by Springer. This book was released on 2016-10-05 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book delves into the recent developments in the microscale and microfluidic technologies that allow manipulation at the single and cell aggregate level. Expert authors review the dominant mechanisms that manipulate and sort biological structures, making this a state-of-the-art overview of conventional cell sorting techniques, the principles of microfluidics, and of microfluidic devices. All chapters highlight the benefits and drawbacks of each technique they discuss, which include magnetic, electrical, optical, acoustic, gravity/sedimentation, inertial, deformability, and aqueous two-phase systems as the dominant mechanisms utilized by microfluidic devices to handle biological samples. Each chapter explains the physics of the mechanism at work, and reviews common geometries and devices to help readers decide the type of style of device required for various applications. This book is appropriate for graduate-level biomedical engineering and analytical chemistry students, as well as engineers and scientists working in the biotechnology industry.
Download or read book Computational Fluid and Solid Mechanics 2003 written by K.J Bathe and published by Elsevier. This book was released on 2003-06-02 with total page 2485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together the world's leading researchers and practitioners of computational mechanics, these new volumes meet and build on the eight key challenges for research and development in computational mechanics. Researchers have recently identified eight critical research tasks facing the field of computational mechanics. These tasks have come about because it appears possible to reach a new level of mathematical modelling and numerical solution that will lead to a much deeper understanding of nature and to great improvements in engineering design.The eight tasks are: The automatic solution of mathematical models Effective numerical schemes for fluid flows The development of an effective mesh-free numerical solution method The development of numerical procedures for multiphysics problems The development of numerical procedures for multiscale problems The modelling of uncertainties The analysis of complete life cycles of systems Education - teaching sound engineering and scientific judgement Readers of Computational Fluid and Solid Mechanics 2003 will be able to apply the combined experience of many of the world's leading researchers to their own research needs. Those in academic environments will gain a better insight into the needs and constraints of the industries they are involved with; those in industry will gain a competitive advantage by gaining insight into the cutting edge research being carried out by colleagues in academia. Features Bridges the gap between academic researchers and practitioners in industry Outlines the eight main challenges facing Research and Design in Computational mechanics and offers new insights into the shifting the research agenda Provides a vision of how strong, basic and exciting education at university can be harmonized with life-long learning to obtain maximum value from the new powerful tools of analysis
Download or read book Advances in Mechanical Engineering written by Vilas R. Kalamkar and published by Springer Nature. This book was released on 2020-06-29 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select peer-reviewed proceedings of the International Conference on Advances in Mechanical Engineering (ICAME 2020). The contents cover latest research in several areas such as advanced energy sources, automation, mechatronics and robotics, automobiles, biomedical engineering, CAD/CAM, CFD, advanced engineering materials, mechanical design, heat and mass transfer, manufacturing and production processes, tribology and wear, surface engineering, ergonomics and human factors, artificial intelligence, and supply chain management. The book brings together advancements happening in the different domains of mechanical engineering, and hence, this will be useful for students and researchers working in mechanical engineering.
Download or read book Control Theory for Physicists written by John Bechhoefer and published by Cambridge University Press. This book was released on 2021-04 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridging the basics to recent research advances, this is the ideal learning and reference work for physicists studying control theory.
Download or read book Elongational Flows written by Chris J. S. Petrie and published by Pitman Publishing. This book was released on 1979 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Food Mixing written by P. J. Cullen and published by John Wiley & Sons. This book was released on 2009-07-21 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mixing of liquids, solids and gases is one of the most commonunit operations in the food industry. Mixing increases thehomogeneity of a system by reducing non-uniformity or gradients incomposition, properties or temperature. Secondary objectives ofmixing include control of rates of heat and mass transfer,reactions and structural changes. In food processing applications,additional mixing challenges include sanitary design, complexrheology, desire for continuous processing and the effects ofmixing on final product texture and sensory profiles. Mixing ensures delivery of a product with constant properties. Forexample, consumers expect all containers of soups, breakfastcereals, fruit mixes, etc to contain the same amount of eachingredient. If mixing fails to achieve the requiredproduct yield, quality, organoleptic or functional attributes,production costs may increase significantly. This volume brings together essential information on theprinciples and applications of mixing within food processing. Whilethere are a number of creditable references covering generalmixing, such publications tend to be aimed at the chemical industryand so topics specific to food applications are often neglected.Chapters address the underlying principles of mixing, equipmentdesign, novel monitoring techniques and the numerical techniquesavailable to advance the scientific understanding of food mixing.Food mixing applications are described in detail. The book will be useful for engineers and scientists who need tospecify and select mixing equipment for specific processingapplications and will assist with the identification and solving ofthe wide range of mixing problems that occur in the food,pharmaceutical and bioprocessing industries. It will also be ofinterest to those who teach, study and research food science andfood engineering.
Download or read book Non Newtonian Flow written by R. P. Chhabra and published by Elsevier. This book was released on 1999-08-19 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-Newtonian materials are encountered in virtually all of the chemical and process industries and a full understanding of their nature and flow characteristics is an essential requirement for engineers and scientists involved in their formulation and handling. This book will bridge the gap between much of the highly theoretical and mathematically complex work of the rheologist and the practical needs of those who have to design and operate plants in which these materials are handled and processed. At the same time, numerous references are included for the benefit of those who need to delve more deeply into the subject.The starting point for any work on non-newtonian fluids is their characterisation over the range of conditions to which they are likely to be subjected during manufacture or utilisation, and this topic is treated early on in the book in a chapter commissioned from an expert in the field of rheological measurements. Coverage of topics is extensive and this book offers a unique and rich selection of material including the flow of single phase and multiphase mixtures in pipes, in packed and fluidised bed systems, heat and mass transfer in boundary layers and in simple duct flows, and mixing etc.An important and novel feature of the book is the inclusion of a wide selection of worked examples to illustrate the methods of calculation. It also incorporates a large selection of problems for the reader to tackle himself.
