Download or read book Simultaneous SO sub 2 NO sub X Abatement Using Zeolite supported Copper Progress Report October 1 1995 September 30 1996 written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The bulk of the results from this project, besides being found in the research reports, are in the form of two theses presented for advanced degrees by two different students at two different institutions. Francis E. Porbeni is a Master's Degree student in Chemistry at Clark Atlanta University and has prepared his Master's Thesis entitled Simultaneous SO[sub 2] Oxidation and NO Decomposition over Copper Oxide on[gamma]-Alumina Catalysts: An Infrared Diffuse Reflectance Study. Sumit Rao, a Ph. D. student in Chemical Engineering at the Georgia Institute of Technology has defended his thesis entitled Role of Copper Ensemble Size in Silica and Zeolite Supported Catalysts for Nitric Oxide Decomposition. These two documents, which will be forwarded when final copies are available, provide the details of the bulk of the research accomplished over the duration of this project. These two documents are summarized, and other results from the project are given.
Download or read book Simultaneous SO2 NO3 Abatement Using Zeolite supported Copper Progress Report October 1 1995 September 30 1996 written by and published by . This book was released on 1996 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: The bulk of the results from this project, besides being found in the research reports, are in the form of two theses presented for advanced degrees by two different students at two different institutions. Francis E. Porbeni is a Masters̀ Degree student in Chemistry at Clark Atlanta University and has prepared his Masters̀ Thesis entitled Simultaneous SO2 Oxidation and NO Decomposition over Copper Oxide on?-Alumina Catalysts: An Infrared Diffuse Reflectance Study. Sumit Rao, a Ph. D. student in Chemical Engineering at the Georgia Institute of Technology has defended his thesis entitled Role of Copper Ensemble Size in Silica and Zeolite Supported Catalysts for Nitric Oxide Decomposition. These two documents, which will be forwarded when final copies are available, provide the details of the bulk of the research accomplished over the duration of this project. These two documents are summarized, and other results from the project are given.
Download or read book Simultaneous SO2 NO3 Abatement Using Zeolite Supported Copper Quarterly Progress Report October 1 1994 December 31 1994 written by and published by . This book was released on 1994 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: We have made progress in characterizing a Cu-exchanged ZSM-5 for NO decomposition activity. Additionally, we are pursuing the impregnation of alumina with vanadium and copper and studying the adsorption and reaction of SO2 on these catalysts.
Download or read book Simultaneous SO2 NO3 Abatement Using Zeolite supported Copper Progress Report January 1 March 31 1996 written by and published by . This book was released on 1996 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors have begun the investigation of the adsorption of NO on the Cu/?-alumina samples. The object of this aspect of the project is to investigate the modes of adsorption of NO on the Cu/?-alumina sorbents, to investigate the potential activity of these materials for the catalysis of the reduction of NO. Additionally, when subsequent measurements of NO interacting with a sulfated sorbent are investigated, a baseline of data will have been obtained which can be used to evaluate the effects of surface sulfation on the adsorption process in the absence of other competing effects. Based on the current results and by comparing results with those found by others, the authors have determined that the copper species exist predominantly as isolated copper atoms on the aluminum oxide surface, which behave chemically as copper aluminate. The copper species is responsible for the formation of an NO/Cu{sup 2+} complex which gives rise to an infrared absorption at 1,863 cm−1. There do exist some Cu species on the surface, which are formed only after some time by an interaction with NO, which give rise to an NO−/Cu+ complex with an infrared absorption at approximately 1,700 cm−1. Additionally, an intense feature at 1,640 cm−1 is observed which may be due to NO2 on the surface, which is the expected oxidation product if NO reduces Cu from Cu{sup 2+} to Cu+.
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1996 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Simultaneous SO2 NOx Abatement Using Zeolite supported Copper Oxide written by Mark G. White and published by . This book was released on 1993 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Verified Synthesis of Zeolitic Materials written by H. Robson and published by Gulf Professional Publishing. This book was released on 2001-06-26 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zeolite synthesis is an active field of research. As long as this continues, new phases will be discovered and new techniques for preparing existing phases will appear. This edition of Verified Synthesis of Zeolitic Materials contains all the recipes from the first edition plus 24 new recipes. Five new introductory articles have been included plus those from the first edition, some of which have been substantially revised. The XRD patterns have been recorded using different instrument settings from those in the first edition and are intended to conform to typical X-ray diffraction practice. In most cases, only the XRD pattern for the productas synthesised is printed here. The exceptions are those phases which show marked changes in the XRD pattern upon calcination.
Download or read book Adsorbents written by Ralph T. Yang and published by John Wiley & Sons. This book was released on 2003-08-01 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adsorption promises to play an integral role in several future energy and environmental technologies, including hydrogen storage, CO removal for fuel cell technology, desulfurization of transportation fuels, and technologies for meeting higher standards on air and water pollutants. Ralph Yang's Adsorbents provides a single and comprehensive source of knowledge for all commercial and new sorbent materials, presenting the fundamental principles for their syntheses, their adsorption properties, and their present and potential applications for separation and purification. Chapter topics in this authoritative, forward-looking volume include: - Formulas for calculating the basic forces or potentials for adsorption - Calculation of pore-size distribution from a single adsorption isotherm - Rules for sorbent selection - Fundamental principles for syntheses/preparation, adsorption properties, and applications of commercially available sorbents - Mesoporous molecular sieves and zeolites - ̧-complexation sorbents and their applications - Carbon nanotubes, pillared clays, and polymeric resins Yang covers the explosion in the development of new nanoporous materials thoroughly, as the adsorption properties of some of these materials have remained largely unexplored. The whole of this book benefits from the new adsorbent designs made possible by the increase in desktop computing and molecular simulation, making Adsorbents useful to both practicing laboratories and graduate programs. Ralph Yang's comprehensive study contributes significantly to the resolution of separation and purification problems by adsorption technologies.
Download or read book EPA 745 B written by and published by . This book was released on 2000 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. New discussion of conceptual plant design, flowsheet development and revamp design Significantly increased coverage of capital cost estimation, process costing and economics New chapters on equipment selection, reactor design and solids handling processes New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography Increased coverage of batch processing, food, pharmaceutical and biological processes All equipment chapters in Part II revised and updated with current information Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards Additional worked examples and homework problems The most complete and up to date coverage of equipment selection 108 realistic commercial design projects from diverse industries A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
Download or read book Monitored Natural Attenuation of Inorganic Contaminants in Ground Water written by and published by . This book was released on 2007 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: V.3 ... consists of individual chapters that describe 1) the conceptual background for radionuclides, including tritium, radon, strontium, technetium, uranium, iodine, radium, thorium, cesium, plutonium-americium and 2) data requirements to be met during site characterization.
Download or read book Gas Separation by Adsorption Processes written by Ralph T. Yang and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas Separation by Adsorption Processes provides a thorough discussion of the advancement in gas adsorption process. The book is comprised of eight chapters that emphasize the fundamentals concept and principles. The text first covers the adsorbents and adsorption isotherms, and then proceeds to detailing the equilibrium adsorption of gas mixtures. Next, the book covers rate processes in adsorbers and adsorber dynamics. The next chapter discusses cyclic gas separation processes, and the remaining two chapters cover pressure-swing adsorption. The book will be of great use to students, researchers, and practitioners of disciplines that involve gas separation processes, such as chemical engineering.
Download or read book Toxicological Profile for Asbestos Update written by G. Douglas Hanley and published by DIANE Publishing. This book was released on 2011 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a print on demand edition of a hard to find publication. Asbestos is a group of 6 different fibrous minerals that occur naturally in the environment. All forms of asbestos are hazardous, and all can cause cancer. This profile includes: (1) The exam¿n. and interpretation of toxicologic info. and epidemiological eval¿s. on asbestos to ascertain the levels of human exposure for the substance and its health effects; (2) A determination of whether adequate info. on the health effects of asbestos is available or in the process of development to determine levels of exposure that present a significant risk to human health; and (3) Where appropriate, identification of toxicologic testing needed to identify the types or levels of exposure that may present significant risk of adverse health effects in humans. Charts and tables.
Download or read book Critical Materials Strategy written by Steven Chu and published by DIANE Publishing. This book was released on 2011-05 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report examines the role of rare earth metals and other materials in the clean energy economy. It was prepared by the U.S. Department of Energy (DoE) based on data collected and research performed during 2010. In the report, DoE describes plans to: (1) develop its first integrated research agenda addressing critical materials, building on three technical workshops convened by the DoE during November and December 2010; (2) strengthen its capacity for information-gathering on this topic; and (3) work closely with international partners, including Japan and Europe, to reduce vulnerability to supply disruptions and address critical material needs. Charts and tables. This is a print on demand report.
Download or read book Methanol Synthesis written by Jerzy Skrzypek and published by . This book was released on 1994 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mesoporous Zeolites written by Javier García-Martínez and published by John Wiley & Sons. This book was released on 2015-05-26 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by a top-level team of both academic and industrial researchers in the field, this is an up-to-date review of mesoporous zeolites. The leading experts cover novel preparation methods that allow for a purpose-oriented fine-tuning of zeolite properties, as well as the related materials, discussing the specific characterization methods and the applications in close relation to each individual preparation approach. The result is a self-contained treatment of the different classes of mesoporous zeolites. With its academic insights and practical relevance this is a comprehensive handbook for researchers in the field and related areas, as well as for developers from the chemical industry.
Download or read book Supported Catalysts and Their Applications written by David C Sherrington and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need to improve both the efficiency and environmental acceptability of industrial processes is driving the development of heterogeneous catalysts across the chemical industry, including commodity, specialty and fine chemicals and in pharmaceuticals and agrochemicals. Drawing on international research, Supported Catalysts and their Applications discusses aspects of the design, synthesis and application of solid supported reagents and catalysts, including supported reagents for multi-step organic synthesis; selectivity in oxidation catalysis; mesoporous molecular sieve catalysts; and the use of Zeolite Beta in organic reactions. In addition, the two discrete areas of heterogeneous catalysis (inorganic oxide materials and polymer-based catalysts) that were developing in parallel are now shown to be converging, which will be of great benefit to the whole field. Providing a snapshot of the state-of-the-art in this fast-moving field, this book will be welcomed by industrialists and researchers, particularly in the agrochemicals and pharmaceuticals industries.
