Download or read book Wireless Personal Communications written by Brian D. Woerner and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: The area of personal and wireless communications is a burgeoning field. Technology advances and new frequency allocations for personal communication services (PCS) are creating numerous business and technical opportunities. It is becoming clear that an essential requirement for exploiting opportunities is the ability to track the dramatic changes in wireless technology, which is a principal aim of this book. Wireless Personal Communications: Research Developments places particular emphasis on the areas of signal processing, propagation and spread-spectrum, and emerging communication systems. This book contains new results on adaptive antennas for capacity improvements in wireless communication systems, as well as state-of-the-art information on the latest technical developments. Also included are several chapters which discuss the impact of defense conversion on the wireless industry, and related competitive issues. The six parts of the book each focus on a distinct issue in wireless communications. Part I contains several tutorial chapters on key areas in wireless communications. The first chapter is on radio wave propagation for emerging wireless personal communication systems. Chapter two contains a comprehensive study of emerging DSP-based interference rejection techniques for single channel (antenna) systems. Chapter three deals with spread spectrum wireless communications, explaining the concept of spread spectrum, modeling techniques for spread spectrum, and current applications and research issues for spread spectrum systems. Part II focuses on digital signal processing and spread spectrum, two means of creating interference and multipath robust communications. Part III concerns propagation aspects of wireless communications. Part IV discusses the performance of emerging wireless systems. Part V describes the opportunities and pitfalls of defense conversion from the perspective of several U.S. defense firms that have successfully made the transition to commercial wireless. The final section discusses a number of competitive issues regarding personal communication services.

Download or read book Spread Spectrum and CDMA written by Valeri P. Ipatov and published by John Wiley & Sons. This book was released on 2005-12-13 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spread spectrum and CDMA are cutting-edge technologies widely used in operational radar, navigation and telecommunication systems and play a pivotal role in the development of the forthcoming generations of systems and networks. This comprehensive resource presents the spread spectrum concept as a product of the advancements in wireless IT, shows how and when the classical problems of signal transmission/processing stimulate the application of spread spectrum, and clarifies the advantages of spread spectrum philosophy. Detailed coverage is provided of the tools and instruments for designing spread spectrum and CDMA signals answering why a designer will prefer one solution over another. The approach adopted is wide-ranging, covering issues that apply to both data transmission and data collection systems such as telecommunications, radar, and navigation. Presents a theory-based analysis complemented by practical examples and real world case studies resulting in a self-sufficient treatment of the subject Contains detailed discussions of new trends in spread spectrum technology such as multi-user reception, multicarrier modulation, OFDM, MIMO and space-time coding Provides advice on designing discrete spread spectrum signals and signal sets for time-frequency measuring, synchronization and multi-user communications Features numerous Matlab-based problems and other exercises to encourage the reader to initiate independent investigations and simulations This valuable text provides timely guidance on the current status and future potential of spread spectrum and CDMA and is an invaluable resource for senior undergraduates and postgraduate students, lecturers and practising engineers and researchers involved in the deployment and development of spread spectrum and CDMA technology. Supported by a Companion website on which instructors and lecturers can find a solutions manual for the problems and Matlab programming, electronic versions of some of the figures and other useful resources such as a list of abbreviations.

Download or read book Fundamentals of Wireless Communication written by David Tse and published by Cambridge University Press. This book was released on 2005-05-26 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook takes a unified view of the fundamentals of wireless communication and explains cutting-edge concepts in a simple and intuitive way. An abundant supply of exercises make it ideal for graduate courses in electrical and computer engineering and it will also be of great interest to practising engineers.

Download or read book CDMA written by Andrew J. Viterbi and published by Prentice Hall. This book was released on 1995 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spread spectrum multiple access communication, known commercially as CDMA (Code Division Multiple Access), is a driving technology behind the rapidly advancing personal communications industry. Its greater bandwidth efficiency and multiple access capabilities make it the leading technology for relieving spectrum congestion caused by the explosion in popularity of cellular mobile and fixed wireless telephones and wireless data terminals. Written by a leader in the creation of CDMA and an internationally recognized authority on wireless digital communication, this book gives you the technical information you need. It presents the fundamentals of digital communications and covers all aspects of commercial direct-sequence spread spectrum technology, incorporating both physical-level principles and network concepts. You will find detailed information on signal generation, synchronization, modulation, and coding of direct-sequence spread spectrum signals. In addition, the book shows how these physical layer functions relate to link and network properties involving cellular coverage, Erlang capacity, and network control. With this book, you will attain a deeper understanding of personal communications system concepts and will be better equipped to develop systems and products at the forefront of the personal wireless communications market.

Download or read book Simulation and Software Radio for Mobile Communications written by Hiroshi Harada and published by Artech House. This book was released on 2002 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This cutting-edge, first-of-its-kind resource gives you a comprehensive understanding of the simulation and evaluation methods used for today's mobile communication systems. Written by two highly regarded experts in the field, the book focuses on the performance of both the physical and protocol layer transmission scheme. It defines and presents several invaluable simulation tools written in MATLAB® code, along with clear examples that explain their use.

Download or read book Wireless Communication Systems in Matlab written by Mathuranathan Viswanathan and published by . This book was released on 2020-06-08 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: * A learner-friendly, practical and example driven book, Wireless Communication Systems in Matlab gives you a solid background in building simulation models for wireless systems in Matlab. This book, an essential guide for understanding the basic implementation aspects of a wireless system, shows how to simulate and model such a system from scratch. The implemented simulation models shown in this book, provide an opportunity for an engineer to understand the basic implementation aspects of modeling various building blocks of a wireless communication system. It presents the following key topics with the required theoretical background, along with the implementation details in the form of Matlab scripts. * Random variables for simulating probabilistic systems and applications like Jakes filter design and colored noise generation. * Models for Shannon's channel capacity, unconstrained awgn channel, binary symmetric channel (BSC), binary erasure channel (BEC), constellation constrained capacities and ergodic capacity over fading channel. The theory of linear block codes, decoding techniques using soft-decisions and hard-decisions, and their performance simulations. * Monte Carlo simulation for ascertaining performance of digital modulation techniques in AWGN and fading channels - Eb/N0 Vs BER curves. Pulse shaping techniques, matched filtering and partial response signaling, Design and implementation of linear equalizers - zero forcing and MMSE equalizers, using them in a communication link and modulation systems with receiver impairments. * Large-scale propagation models like Friis free space model, log distance model, two ray ground reflection model, single knife-edge diffraction model, Hata Okumura model. * Essentials of small-scale propagation models for wireless channels, such as, power delay profile, Doppler power spectrum, Rayleigh and Rice processes. Modeling flat fading and frequency selective channels. * Diversity techniques for multiple antenna systems: Alamouti space-time coding, maximum ratio combining, equal gain combining and selection combining. * Simulation models for direct sequence spread spectrum, frequency hopping spread spectrum and OFDM.

Download or read book Principles of Spread Spectrum Communication Systems Second Edition written by Don Torrieri and published by Springer Science & Business Media. This book was released on 2011-07-15 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a concise but lucid explanation of the fundamentals of spread-spectrum systems with an emphasis on theoretical principles. Throughout the book, learning is facilitated by many new or streamlined derivations of the classical theory. Problems at the end of each chapter are intended to assist readers in consolidating their knowledge and to provide practice in analytical techniques. The choice of specific topics is tempered by the author’s judgment of their practical significance and interest to both researchers and system designers. The evolution of spread spectrum communication systems and the prominence of new mathematical methods in their design provided the motivation to undertake this new edition of the book. This edition is intended to enable readers to understand the current state-of-the-art in this field. More than 20 percent of the material in this edition is new, including a chapter on systems with iterative channel estimation, and the remainder of the material has been thoroughly revised.

Download or read book Modeling of Digital Communication Systems Using SIMULINK written by Arthur A. Giordano and published by John Wiley & Sons. This book was released on 2015-03-03 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and detailed treatment of the program SIMULINK® that focuses on SIMULINK® for simulations in Digital and Wireless Communications Modeling of Digital Communication Systems Using SIMULINK® introduces the reader to SIMULINK®, an extension of the widely-used MATLAB modeling tool, and the use of SIMULINK® in modeling and simulating digital communication systems, including wireless communication systems. Readers will learn to model a wide selection of digital communications techniques and evaluate their performance for many important channel conditions. Modeling of Digital Communication Systems Using SIMULINK® is organized in two parts. The first addresses Simulink® models of digital communications systems using various modulation, coding, channel conditions and receiver processing techniques. The second part provides a collection of examples, including speech coding, interference cancellation, spread spectrum, adaptive signal processing, Kalman filtering and modulation and coding techniques currently implemented in mobile wireless systems. Covers case examples, progressing from basic to complex Provides applications for mobile communications, satellite communications, and fixed wireless systems that reveal the power of SIMULINK modeling Includes access to useable SIMULINK® simulations online All models in the text have been updated to R2018a; only problem sets require updating to the latest release by the user Covering both the use of SIMULINK® in digital communications and the complex aspects of wireless communication systems, Modeling of Digital Communication Systems UsingSIMULINK® is a great resource for both practicing engineers and students with MATLAB experience.

Download or read book Wireless Communications written by Theodore S. Rappaport and published by Cambridge University Press. This book was released on 2024-02-08 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now reissued by Cambridge University Press, the updated second edition of this definitive textbook provides an unrivaled introduction to the theoretical and practical fundamentals of wireless communications. Key technical concepts are developed from first principles, and demonstrated to students using over 50 carefully curated worked examples. Over 200 end-of-chapter problems, based on real-world industry scenarios, help cement student understanding. The book provides a thorough coverage of foundational wireless technologies, including wireless local area networks (WLAN), 3G systems, and Bluetooth along with refreshed summaries of recent cellular standards leading to 4G and 5G, insights into the new areas of mobile satellite communications and fixed wireless access, and extra homework problems. Supported online by a solutions manual and lecture slides for instructors, this is the ideal foundation for senior undergraduate and graduate courses in wireless communications.

Download or read book Multi Carrier and Spread Spectrum Systems written by K. Fazel and published by John Wiley & Sons. This book was released on 2004-02-06 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frequency spectrum is a limited and valuable resource for wireless communications. A good example can be observed among network operators in Europe for the prices to pay for UMTS-frequency bands. Therefore, the first goal when designing future wireless communication systems (e.g. 4G - fourth generation) has to be the increase in spectral efficiency. The development in digital communications in the past years has enabled efficient modulation and coding techniques for robust and spectral efficient data, speech, audio and video transmission. These are the multi-carrier modulation (e.g. OFDM) and the spread spectrum technique (e.g. DS-CDMA), where OFDM was chosen for broadcast applications (DVB, DAB) as well as for broadband wireless indoor standards (ETSI HIPERLAN-II, IEEE-802.11) and the DS-CDMA was selected in mobile communications (IS-95, third generation mobile radio systems world wide, UMTS/IMT 2000). Since 1993 various combinations of multi-carrier (MC) modulation and the spread spectrum (SS) technique have been introduced and the field of MC-SS communications has become an independent and important research topic with increasing activities. New application fields have been proposed such as high rate cellular mobile, high rate wireless indoor and LMDS. It has been shown that MC-SS offers the high spectral efficiency, robustness and flexibility that is required for the next generation systems. Meanwhile, different alternative hybrid schemes such as OFDM/OFDMA, MC-TDMA, etc. have been deeply analysed and adopted in different international standards (ETSI-BRAN, IEEE-802 & MMAC). Multi-Carrier & Spread-Spectrum: Analysis of Hybrid Air Interfaces draws together all of the above mentioned hybrid schemes therefore providing a greatly needed resource for system engineers, telecommunication designers and researchers in order to enable them to develop, build and deploy several schemes based on MC-transmission for the next generation systems (which will be an integration of broadband multimedia services covering both 4G mobile and fixed wireless systems). * Offers a complete treatment of multi-carrier, spread-spectrum (SS) and time division multiplexing (TDM) techniques * Provides an in-depth insight into hybrid multiple access techniques based on multi-carrier (MC) transmission * Presents numerous hybrid multiple access and air interface architectures including OFDM/CDMA, MC-CDMA, MC-DS-CDMA and MT-CDMA * Covers new techniques such as space-time coding and software radio Telecommunications engineers, hardware & software system designers and researchers as well as students, lecturers and technicians will all find this an invaluable addition to their bookshelf.

Download or read book Wireless Personal Communications written by William H. Tranter and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: th The papers appearing in this book were originally presented at the 9 Virginia Tech/MPRG Symposium on Wireless Personal Communications. The Symposium on Wireless Communications, which is an annual event for Virginia Tech, was held on June 2-4, 1999. The 1999 symposium was co-sponsored by MPRG, the Division of Continuing Education, University International Programs, and the MPRG Industrial Affiliate Sponsors. Much of the success of our annual symposium, as well as the success of MPRG's research program, is due to the support of our industrial affiliates. Their support allows us to serve the wireless community through research, education and outreach programs. At the time of the 1999 symposium, the MPRG affiliates program included the following organizations: Army Research Office, AT&T Corporation, Bellsouth Cellular Corporation, Comcast Cellular Communications, Inc. , Datum, Inc. , Ericsson, Inc. , Grayson Wireless, Hewlett-Packard Company, Honeywell, Inc. , Hughes Electronics Corporation, ITT Industries, Lucent Technologies, Motorola, National Semiconductor, Nokia, Nortel Networks, Qualcomm, Inc. , Radix Technologies, Inc. , Salient 3 Communications, Samsung Advanced Institute of Technology, Southwestern Bell, Tantivy Communications, Tektronix, Inc. , Telcordia Technologies, Texas Instruments, TRW, Inc. , and the Watkins-Johnson Company As can be seen from the Table of Contents, the papers included in this book are divided into six sections. The first five of these correspond to symposium sessions, and cover the following topics: Propagation and Channel Modeling (4 papers), Antennas (6 papers), Multiuser Detection (3 papers), Radio Systems and Technology (4 papers), and Wireless Data (3 papers).

Download or read book Wireless Communications for Power Substations RF Characterization and Modeling written by Basile L. Agba and published by Springer. This book was released on 2018-06-08 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of the identification, characterization, and modeling of electromagnetic interferences in substations for the deployment of wireless sensor networks. The authors present in chapter 3 the measurement setup to record sequences of impulsive noise samples in the ISM band of interest. The setup can measure substation impulsive noise, in wide band, with enough samples per time window and enough precision to allow a statistical study of the noise. During the measurement campaign, the authors recorded around 120 noise sequences in different substations and for four ranges of equipment voltage, which are 25 kV, 230 kV, 315 kV and 735 kV. A characterization process is proposed, by which physical characteristics of partial discharge can be measured in terms of first- and second-order statistics. From the measurement campaign, the authors infer the characteristics of substation impulsive noise as a function of the substation equipment voltage, and can provide representative parameters for the four voltage ranges and for several existing impulsive noise models. The authors investigate in chapters 4 and 5 the modeling of electromagnetic interferences caused by partial discharge sources. First, the authors propose a complete and coherent approach model that links physical characteristics of high-voltage installations to the induced radio-interference spectra of partial discharge sources. The goodness-of-fit of the proposed physical model has been measured based on some interesting statistical metrics. This allows one to assess the effectiveness of the authors' approach in terms of first- and second-order statistics. Chapter 6 proposes a model based on statistical approach. Indeed, substation impulsive noise is composed of correlated impulses, which would require models with memory in order to replicate a similar correlation. Among different models, we have configured a Partitioned Markov Chain (PMC) with 19 states (one state for the background noise and 18 states for the impulse); this Markov-Gaussian model is able to generate impulsive noise with correlated impulse samples. The correlation is observable on the impulse duration and the power spectrum of the impulses. Our PMC model provides characteristics that are more similar to the characteristics of substation impulsive noise in comparison with other models, in terms of time and frequency response, as well as Probability Density Functions (PDF). Although PMC represents reliably substation impulsive noise, the model remains complex in terms of parameter estimation due to a large number of Markov states, which can be an obstacle for future wireless system design. In order to simplify the model, the authors decrease the number of states to 7 by assigning one state to the background noise and 6 states to the impulse and we call this model PMC-6. PMC-6 can generate realistic impulses and can be easily implemented in a receiver in order to mitigate substation impulsive noise. Representative parameters are provided in order to replicate substation impulsive noise for different voltage ranges (25-735 kV). Chapter 7, a generalized radio-noise model for substations is proposed, in which there are many discharges sources that are randomly distributed over space and time according to the Poisson field of interferers approach. This allows for the identification of some interesting statistical properties of moments, cumulants and probability distributions. These can, in turn, be utilized in signal processing algorithms for rapid partial discharge's identification, localization, and impulsive noise mitigation techniques in wireless communications in substations. The primary audience for this book is the electrical and power engineering industry, electricity providers and companies who are interested in substation automation systems using wireless communication technologies for smart grid applications. Researchers, engineers and students studying and working in wireless communication will also want to buy this book as a reference.

Download or read book Wireless Communications written by Andrea Goldsmith and published by Cambridge University Press. This book was released on 2005-08-08 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless technology is a truly revolutionary paradigm shift, enabling multimedia communications between people and devices from any location. It also underpins exciting applications such as sensor networks, smart homes, telemedicine, and automated highways. This book provides a comprehensive introduction to the underlying theory, design techniques and analytical tools of wireless communications, focusing primarily on the core principles of wireless system design. The book begins with an overview of wireless systems and standards. The characteristics of the wireless channel are then described, including their fundamental capacity limits. Various modulation, coding, and signal processing schemes are then discussed in detail, including state-of-the-art adaptive modulation, multicarrier, spread spectrum, and multiple antenna techniques. The concluding chapters deal with multiuser communications, cellular system design, and ad-hoc network design. Design insights and tradeoffs are emphasized throughout the book. It contains many worked examples, over 200 figures, almost 300 homework exercises, over 700 references, and is an ideal textbook for students.

Download or read book Spread Spectrum Techniques written by Robert C. Dixon and published by . This book was released on 1976-11-01 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Wireless Communications written by Asrar U.H. Sheikh and published by Springer Science & Business Media. This book was released on 2011-06-27 with total page 765 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless communication systems, since their inception in the form of cellular communications, have spread rapidly throughout the western world and the trend is catching on in the developing countries as well. These sys tems have caused revolutionary changes in the way we live. Cellular Commu nications have become important both as means of communication and as a new domain ofcommercial enterprise. Hand held telephones are now rapidly replacing the fixed telephone and in less than twenty years, the number of subscribers has reached nearly three quarters of a billion. In a short span of twenty years, the cellular communications progressed from the first genera tion to the third generation systems, which started operations in Japan on October 1,2001. The first generation wireless technology, which was thought to be obsolete is now being used for fixed wired telephony in several coun tries of Asia, Africa and Latin America. As some commentator said in 1983, the cellular system is the best thing that has happened in telecommunications since the introduction ofcomputers to the masses. This book is written to provide readers with the fundamental concepts ofwireless communications. It is intended for a graduate course on wireless communications but it could be easily adopted at the senior level by skipping material involving difficult mathematical manipulations. The text does not go through the rigorous material on mathematical treatment of electromagnetic waves and propagation, rather it emphasizes more on the practical aspects of this.

Download or read book Modeling Simulation and Optimization of Integrated Circuits written by K. Antreich and published by Birkhäuser. This book was released on 2012-12-06 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third Conference on Mathematical Models and Numerical Simulation in Electronic Industry brought together researchers in mathematics, electrical engineering and scientists working in industry. The contributions to this volume try to bridge the gap between basic and applied mathematics, research in electrical engineering and the needs of industry.

Download or read book Graphics and GUIs with MATLAB written by Patrick Marchand and published by CRC Press. This book was released on 1999-04-23 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition provides illustrative example sets to simplify the process of learning and mastering the powerful, flexible, and easy-to-use MATLAB graphics environment. It shows how to maximize the high performance and open-environment capabilities for generating, displaying, and analyzing numerical data as well as how to quickly create interesting and beautiful graphics. The book covers plotting, color, animation, the new z buffer algorithm, new functions for generating graphics for presentations, and GUI programming techniques. Designed as both an introduction as well as an advanced learning tool, the book uses step-by-step tutorials with a level of detail, explanation, and instruction that allows readers to discover the full potential of the MATLAB graphics programming capability.