Download or read book Simulations in Bulk Solids Handling written by Don McGlinchey and published by John Wiley & Sons. This book was released on 2023-01-20 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulations in Bulk Solids Handling Valuable resource for engineers and professionals dealing with bulk granular or powdered materials across industries using Discrete Element Methods (DEM) In many traditional university engineering programmes, no matter whether undergraduate or postgraduate, the behavior of granular materials is not covered in depth or at all. This omission leaves recent engineering graduates with little formal education in the major industrial area of bulk solids handling. This book teaches young professionals and engineers to find appropriate solutions for handling granular and powdered materials. It also provides valuable information for experienced engineers to gain an understanding and appreciation of the most significant simulation methods–DEM chief amongst them. For any student or professional involved with bulk solids handling, this book is a key resource to understand the most efficient and effective stimulation methods that are available today. Its comprehensive overview of the topic allows for upcoming professionals to ensure they have adequate knowledge in the field and for experienced professionals to improve their skills and processes.
Download or read book Bulk Solids Handling written by C.R. Woodcock and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: An understanding ofthe properties and the handling characteristics of liquids and gases has long been regarded as an essential requirement for most practising engineers. It is therefore not surprising that, over the years, there has been a regular appearance of books dealing with the fundamentals of fluid mechanics, fluid flow, hydraulics and related topics. What is surprising is that there has been no parallel development of the related discipline of Bulk Solids Handling, despite its increasing importance in modern industry across the world. It is only very recently that a structured approach to the teaching, and learning, of the subject has begun to evolve. A reason for the slow emergence of Bulk Solids Handling as an accepted topic of study in academic courses on mechanical, agricultural, chemical, mining and civil engineering is perhaps that the practice is so often taken for granted. Certainly the variety of materials being handled in bulk is almost endless, ranging in size from fine dust to rocks, in value from refuse to gold, and in temperature from deep-frozen peas to near-molten metal.
Download or read book Handling of Bulk Solids written by P. A. Shamlou and published by Elsevier. This book was released on 2013-10-22 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handling of Bulk Solids provides a comprehensive discussion of the field of solids flow and handling in the process industries. Presentation of the subject follows classical lines of separate discussions for each topic, so each chapter is self-contained and can be read on its own. Topics discussed include bulk solids flow and handling properties; pressure profiles in bulk solids storage vessels; the design of storage silos for reliable discharge of bulk materials; gravity flow of particulate materials from storage vessels; pneumatic transportation of bulk solids; and the hazards of solid-materials handling and processing along with their prevention. Worked-out examples are included at the end of each chapter to familiarize the reader with the numerical manipulations and orders of magnitude of various parameters which occur in the subject of bulk solids handling. Because of the complicated form of most of the design equations involved, the computer is an ideal vehicle for the solution of many design problems in bulk solids handling. This book is suitable for advanced undergraduate and postgraduate levels as well as for practitioners in industry.
Download or read book Dynamic Flowsheet Simulation of Solids Processes written by Stefan Heinrich and published by Springer Nature. This book was released on 2020-06-20 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest advances in flowsheet simulation of solids processes, focusing on the dynamic behaviour of systems with interconnected solids processing units, but also covering stationary simulation. The book includes the modelling of solids processing units, for example for comminution, sifting and particle formulation and also for reaction systems. Furthermore, it examines new approaches for the description of solids and their property distributions and for the mathematical treatment of flowsheets with multivariate population balances.
Download or read book Bulk Solids Handling written by and published by . This book was released on 2001 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterisation of Bulk Solids written by Don McGlinchey and published by John Wiley & Sons. This book was released on 2009-02-12 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handling of powders and bulk solids is a critical industrial technology across a broad spectrum of industries, from minerals processing to bulk and fine chemicals, and the food and pharmaceutical industries, yet is rarely found in the curricula of engineering or chemistry departments. With contributions from leading authors in their respective fields, Characterisation of Bulk Solids provides the reader with a sound understanding of the techniques, importance and application of particulate materials characterisation. It covers the fundamental characteristics of individual particles and bulk particulate materials, and includes discussion of a wide range of measurement techniques, and the use of material characteristics in design and industrial practice. The reader will then be in a better position to diagnose solids handling and processing problems in industry, and to deal with experts and equipment suppliers from an informed standpoint. Written for post-graduate engineers, chemical scientists and technologists at all stages of their industrial career, the book will also serve as an ideal primer in any of the specialist areas to inform further study.
Download or read book Handbook of Conveying and Handling of Particulate Solids written by A. Levy and published by Elsevier. This book was released on 2001-10-22 with total page 871 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook presents comprehensive coverage of the technology for conveying and handling particulate solids. Each chapter covers a different topic and contains both fundamentals and applications. Usually, each chapter, or a topic within a chapter, starts with one of the review papers. Chapter 1 covers the characterization of the particulate materials. Chapter 2 covers the behaviour of particulate materials during storage, and presents recent developments in storage and feeders design and performance. Chapter 3 presents fundamental studies of particulate flow, while Chapters 4 and 5 present transport solutions, and the pitfalls of pneumatic, slurry, and capsule conveying. Chapters 6, 7 and 8 cover both the fundamentals and development of processes for particulate solids, starting from fluidisation and drying, segregation and mixing, and size-reduction and enlargement. Chapter 9 presents environmental aspects and the classification of the particulate materials after they have been handled by one of the above-mentioned processes. Finally, Chapter 10 covers applications and developments of measurement techniques that are the heart of the analysis of any conveying or handling system.
Download or read book Springer Handbook of Mechanical Engineering written by Karl-Heinrich Grote and published by Springer Nature. This book was released on 2020-12-09 with total page 1310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This resource covers all areas of interest for the practicing engineer as well as for the student at various levels and educational institutions. It features the work of authors from all over the world who have contributed their expertise and support the globally working engineer in finding a solution for today‘s mechanical engineering problems. Each subject is discussed in detail and supported by numerous figures and tables.
Download or read book Bulk Solids Handling written by Don McGlinchey and published by . This book was released on 2008 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Powders and Bulk Solids written by Dietmar Schulze and published by Springer Nature. This book was released on 2021-09-02 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book concentrates on powder flow properties, their measurement and applications. These topics are explained starting from the interactions between individual particles up to the design of silos. A wide range of problems are discussed – such as flow obstructions, segregation, and vibrations. The goal is to provide a deeper understanding of the powder flow, and to show practical solutions.
Download or read book Powder and Bulk Solids Handling Processes written by Koichi Iinoya and published by CRC Press. This book was released on 1988-07-01 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents some key points in the instrumentation of powder handling processes and provides readers with sufficient knowledge of instrumentation to act as a base for the development of new instruments. It is helpful for instrumentation engineers in powder and bulk solid processes.
Download or read book The Yearbook Directory Powder Bulk Solids Handling Processing written by and published by . This book was released on 2000 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Modeling in Micromechanics via Particle Methods written by H. Konietzky and published by Routledge. This book was released on 2017-11-01 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle methods have seen increasing use in several engineering and scientific fields, both because of their unique modelling capabilities and the availability of the necessary computational power. This title focuses on their theory and application.
Download or read book Powders and Solids written by W Hoyle and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chemical industry processes a high proportion of its products in powder form, thus making the efficient, effective and safe handling and processing of powders of prime importance. Powders and Solids: Developments in Handling and Processing Technologies brings the reader right up-to-date with both newly-introduced commercial practices and results of recent fundamental research on the behaviour of model powders. Case studies are also included. Commencing with an overview of developments in the health and safety aspects of handling powders, the book then goes on to look at the new technologies being applied to powders and powder handling, followed by aspects of measurement and control in powder handling. It will be essential reading for all industrial practitioners, particularly those in the pharmaceutical industry, as well as all engineers working either in industry or research on processes involving solid and powder handling.
Download or read book International Conference on Bulk Materials Storage Handling and Transportation 1983 written by and published by Institution of Engineers. This book was released on 1983 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical and Numerical Simulation of Material Processing VI written by Ji Tai Niu and published by Trans Tech Publications Ltd. This book was released on 2011-12-06 with total page 1640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical and numerical simulations make it possible for materials science to go from experience-based to science-based, and from qualitative to quantitative understanding. Physical simulations, which effectively reveal the underlying principles of a materials structure and property evolution, save significant amounts of time and money. Numerical simulations meanwhile permit descriptions and forms of material processes which are impossible to achieve experimentally. Both types of simulation are naturally gaining acceptance worldwide, and will become a prominent approach used in materials research in the 21st century. Young researchers will therefore benefit greatly from studying this volume.
Download or read book Unit and Bulk Materials Handling Presented at the Materials Handling Conference ASME Century 2 Emerging Technology Conferences San Francisco California August 19 21 1980 written by Frank J. Loeffler and published by . This book was released on 1980 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt:
