Download or read book Simulations for Design and Manufacturing written by Uday S. Dixit and published by Springer. This book was released on 2018-04-19 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on numerical simulations of manufacturing processes, discussing the use of numerical simulation techniques for design and analysis of the components and the manufacturing systems. Experimental studies on manufacturing processes are costly, time consuming and limited to the facilities available. Numerical simulations can help study the process at a faster rate and for a wide range of process conditions. They also provide good prediction accuracy and deeper insights into the process. The simulation models do not require any pre-simulation, experimental or analytical results, making them highly suitable and widely used for the reliable prediction of process outcomes. The book is based on selected proceedings of AIMTDR 2016. The chapters discuss topics relating to various simulation techniques, such as computational fluid dynamics, heat flow, thermo-mechanical analysis, molecular dynamics, multibody dynamic analysis, and operational modal analysis. These simulation techniques are used to: 1) design the components, 2) to investigate the effect of critical process parameters on the process outcome, 3) to explore the physics of the process, 4) to analyse the feasibility of the process or design, and 5) to optimize the process. A wide range of advanced manufacturing processes are covered, including friction stir welding, electro-discharge machining, electro-chemical machining, magnetic pulse welding, milling with MQL (minimum quantity lubrication), electromagnetic cladding, abrasive flow machining, incremental sheet forming, ultrasonic assisted turning, TIG welding, and laser sintering. This book will be useful to researchers and professional engineers alike.

Download or read book Experiments and Simulations in Advanced Manufacturing written by Panagiotis Kyratsis and published by Springer Nature. This book was released on 2021-04-29 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest advances in manufacturing from both the experimental and simulation point of view. It covers most aspects of manufacturing engineering, i.e. theoretical, analytical, computational and experimental studies. Experimental studies on manufacturing processes require funds, time and expensive facilities, while numerical simulations and mathematical models can improve the efficiency of using the research results. It also provides high level of prediction accuracy and the basis for novel research directions.

Download or read book Advances in Simulation Product Design and Development written by M. S. Shunmugam and published by Springer Nature. This book was released on 2019-11-06 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises select proceedings of the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The papers in this volume discuss simulations based on techniques such as finite element method (FEM) as well as soft computing based techniques such as artificial neural network (ANN), their optimization and the development and design of mechanical products. This volume will be of interest to researchers, policy makers, and practicing engineers alike.

Download or read book Advances in Composites Manufacturing and Process Design written by Philippe Boisse and published by Woodhead Publishing. This book was released on 2015-07-29 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacturing processes of composite materials are numerous and often complex. Continuous research into the subject area has made it hugely relevant with new advances enriching our understanding and helping us overcome design and manufacturing challenges. Advances in Composites Manufacturing and Process Design provides comprehensive coverage of all processing techniques in the field with a strong emphasis on recent advances, modeling and simulation of the design process. Part One reviews the advances in composite manufacturing processes and includes detailed coverage of braiding, knitting, weaving, fibre placement, draping, machining and drilling, and 3D composite processes. There are also highly informative chapters on thermoplastic and ceramic composite manufacturing processes, and repairing composites. The mechanical behaviour of reinforcements and the numerical simulation of composite manufacturing processes are examined in Part Two. Chapters examine the properties and behaviour of textile reinforcements and resins. The final chapters of the book investigate finite element analysis of composite forming, numerical simulation of flow processes, pultrusion processes and modeling of chemical vapour infiltration processes. Outlines the advances in the different methods of composite manufacturing processes Provides extensive information on the thermo-mechanical behavior of reinforcements and composite prepregs Reviews numerical simulations of forming and flow processes, as well as pultrusion processes and modeling chemical vapor infiltration

Download or read book Retooling Manufacturing written by National Research Council and published by National Academies Press. This book was released on 2004-09-30 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the Department of Defense continues development of the future warrior system, the difficulty of moving rapidly from design to manufacturing for complex technologies is becoming a major concern. In particular, there are communication gaps between design and manufacturing that hinder rapid development of new products important for these future military developments. To help address those concerns, DOD asked the NRC to develop a framework for "bridging" these gaps through data management, modeling, and simulation. This report presents the results of this study. It provides a framework for virtual design and manufacturing and an assessment of the necessary tools; an analysis of the economic dimensions; an examination of barriers to virtual design and manufacturing in the DOD acquisition process; and a series of recommendations and research needs.

Download or read book Flexible Manufacturing Systems in Practice written by Joseph Talavage and published by CRC Press. This book was released on 2020-09-11 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written for all those interested in flexible manufacturing systems (FMS) and other forms of computerized manufacturing systems (CMS). It deals with many aspects of the design, operation, and simulation of FMS and explains the origins of FMS.

Download or read book Advances on Mechanics Design Engineering and Manufacturing II written by Francisco Cavas-Martínez and published by Springer. This book was released on 2019-04-27 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2018), held on 20-22 June 2018 in Cartagena, Spain. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into six main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.

Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.

Download or read book Advances in Design Simulation and Manufacturing II written by Vitalii Ivanov and published by Springer. This book was released on 2019-06-06 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on topics at the interface between manufacturing, mechanical and chemical engineering. It gives special emphasis to CAD/CAE systems, information management systems, advanced numerical simulation methods and computational modeling techniques, and their use in product design, industrial process optimization and in the study of the properties of solids, structures, and fluids. Control theory, ICT for engineering education as well as ecological design, and food technologies are also among the topics discussed in the book. Based on the 2nd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2019), held on June 11-14, 2019, in Lutsk, Ukraine, the book provides academics and professionals with a timely overview and extensive information on trends and technologies behind current and future developments of Industry 4.0, innovative design and renewable energy generation.

Download or read book Advances in Design Simulation and Manufacturing written by Vitalii Ivanov and published by Springer. This book was released on 2018-06-15 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on topics at the interface between manufacturing, mechanical and chemical engineering. It gives a special emphasis to CAD/CAE systems, information management systems, advanced numerical simulation methods and computational modeling techniques, and their use in product design, industrial process optimization and in the study of the properties of solids, structures and fluids. Control theory, ICT for engineering education as well as ecological design and food technologies are also among the topics discussed in the book. Based on the International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2018), held on June 12-15, 2018, in Sumy, Ukraine, the book provides academics and professionals with a timely overview and extensive information on trends and technologies behind current and future developments of Industry 4.0, innovative design and renewable energy generation.

Download or read book Manufacturing Simulation written by Richard Kendall Miller and published by . This book was released on 1985-01-01 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances on Mechanics Design Engineering and Manufacturing III written by Lionel Roucoules and published by Springer Nature. This book was released on 2021-04-21 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book gathers contributions presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2020), held as a web conference on June 2–4, 2020. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is organized into four main parts, reflecting the focus and primary themes of the conference. The contributions presented here not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed and future interdisciplinary collaborations.

Download or read book Computer Aided Design Manufacturing Modeling and Simulation written by Xin Gui He and published by Trans Tech Publications Ltd. This book was released on 2011-08-22 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). The aim of this special volume was to facilitate the exchange of information concerning the best practices for CAD, CAM, Manufacturing, Mechanical Engineering, Modeling and Simulation, etc. It provided the opportunity for engineers and scientists in academia, industry, and government to address the most innovative research and developments, including technical challenges, social and economic issues, and to discuss ideas, results, work-in-progress and experience touching all aspects of Computer-Aided Design, Manufacturing, Modeling and Simulation.

Download or read book Advances in Design Simulation and Manufacturing III written by Vitalii Ivanov and published by Springer Nature. This book was released on 2020-06-04 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on topics at the interface between manufacturing and materials engineering, with a special emphasis on design and simulation issues. Specifically, it covers the development of CAx technologies for product design, the implementation of smart manufacturing systems and Industry 4.0 strategies, topics in technological assurance, numerical simulation and experimental studies on cutting, milling, grinding, pressing and profiling processes, as well as the development and implementation of new advanced materials. Based on the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2020), held on June 9-12, 2020 in Kharkiv, Ukraine, this first volume in a two-volume set provides academics and professionals with extensive information on the latest trends, technologies, challenges and practice-oriented lessons learned in the above-mentioned areas.

Download or read book Modeling and Simulation in Manufacturing and Defense Acquisition written by National Research Council and published by National Academies Press. This book was released on 2002-07-01 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Committee on Modeling and Simulation Enhancements for 21st Century Manufacturing and Acquisition was formed by the NRC in response to a request from the Defense Modeling and Simulation Office (DMSO) of DOD. The committee was asked to (1) investigate next-generation evolutionary and revolutionary M&S capabilities that will support enhanced defense systems acquisition; (2) identify specific emerging design, testing, and manufacturing process technologies that can be enabled by advanced M&S capabilities; (3) relate these emerging technologies to long-term DOD requirements; (4) assess ongoing efforts to develop advanced M&S capabilities and identify gaps that must be filled to make the emerging technologies a reality; (5) identify lessons learned from industry; and (6) recommend specific government actions to expedite development and to enable maximum DOD and U.S. commercial benefit from these capabilities. To complete its task, the committee identified relevant trends and their impact on defense acquisition needs; current use and support for use of M&S within DOD; lessons learned from commercial manufacturing; three cross-cutting and especially challenging uses of M&S technologies; and the areas in which basic research is needed in M&S in order to achieve the desired goals for manufacturing and defense acquisition.

Download or read book Introducing Technology Computer Aided Design TCAD written by Chinmay K. Maiti and published by CRC Press. This book was released on 2017-03-16 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This might be the first book that deals mostly with the 3D technology computer-aided design (TCAD) simulations of major state-of-the-art stress- and strain-engineered advanced semiconductor devices: MOSFETs, BJTs, HBTs, nonclassical MOS devices, finFETs, silicon-germanium hetero-FETs, solar cells, power devices, and memory devices. The book focuses on how to set up 3D TCAD simulation tools, from mask layout to process and device simulation, including design for manufacturing (DFM), and from device modeling to SPICE parameter extraction. The book also offers an innovative and new approach to teaching the fundamentals of semiconductor process and device design using advanced TCAD simulations of various semiconductor structures. The simulation examples chosen are from the most popular devices in use today and provide useful technology and device physics insights. To extend the role of TCAD in today’s advanced technology era, process compact modeling and DFM issues have been included for design–technology interface generation. Unique in approach, this book provides an integrated view of silicon technology and beyond—with emphasis on TCAD simulations. It is the first book to provide a web-based online laboratory for semiconductor device characterization and SPICE parameter extraction. It describes not only the manufacturing practice associated with the technologies used but also the underlying scientific basis for those technologies. Written from an engineering standpoint, this book provides the process design and simulation background needed to understand new and future technology development, process modeling, and design of nanoscale transistors. The book also advances the understanding and knowledge of modern IC design via TCAD, improves the quality in micro- and nanoelectronics R&D, and supports the training of semiconductor specialists. It is intended as a textbook or reference for graduate students in the field of semiconductor fabrication and as a reference for engineers involved in VLSI technology development who have to solve device and process problems. CAD specialists will also find this book useful since it discusses the organization of the simulation system, in addition to presenting many case studies where the user applies TCAD tools in different situations.

Download or read book Numerical Simulation based Design written by Xu Han and published by . This book was released on 2020 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on numerical simulation-based design theory and methods in mechanical engineering. The simulation-based design of mechanical equipment involves considerable scientific challenges including extremely complex systems, extreme working conditions, multi-source uncertainties, multi-physics coupling, and large-scale computation. In order to overcome these technical difficulties, this book systematically elaborates upon the advanced design methods, covering high-fidelity simulation modeling, rapid structural analysis, multi-objective design optimization, uncertainty analysis and optimization, which can effectively improve the design accuracy, efficiency, multi-functionality and reliability of complicated mechanical structures. This book is primarily intended for researchers, engineers and postgraduate students in mechanical engineering, especially in mechanical design, numerical simulation and engineering optimization.