Download or read book Simulation optimisation et analyse de performances pour les syst mes industriels d acquisition d images written by Riyanto and published by . This book was released on 1997 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: LE SYSTEME D'ACQUISITION D'IMAGES EST UN ELEMENT CRUCIAL DANS UN SYSTEME DE VISION PAR ORDINATEUR. MEILLEURES SERONT LES IMAGES OBTENUES, MEILLEURS SERONT LES RESULTATS DES ALGORITHMES DE TRAITEMENT D'IMAGES. CE MEMOIRE PRESENTE UNE ETUDE APPROFONDIE SUR LES SYSTEMES D'ACQUISITION D'IMAGES UTILISES DANS UN CONTEXTE INDUSTRIEL DANS LE BUT D'EVALUER LEUR PERFORMANCE ET DE PROPOSER DES VOIES D'AMELIORATION. L'ETUDE EST DIVISEE EN TROIS PARTIES : LA PREMIERE PARTIE REALISE UNE ETUDE THEORIQUE DE CES SYSTEMES. UNE MODELISATION COMPLETE DU PROCESSUS DE LA FORMATION D'IMAGES EST PROPOSEE. LA DEUXIEME PARTIE PROPOSE L'UTILISATION DE CE MODELE SOUS FORME D'UN SIMULATEUR. LA MESURE DE PERFORMANCE D'UN SYSTEME D'ACQUISITION EN TERME DE LA QUALITE DE L'ECLAIRAGE ET DES IMAGES OBTENUES EST INTRODUITE. UTILISANT LA METHODE DE MONTE CARLO POUR SIMULER LES PERTURBATIONS ALEATOIRES DES PARAMETRES DE CE SYSTEME, LES PARAMETRES CRITIQUES PEUVENT AINSI ETRE DETERMINES. LA TROISIEME PARTIE PROPOSE UN OUTIL D'OPTIMISATION DES PARAMETRES D'ECLAIRAGE PAR UNE APPROCHE SEMI-AUTOMATIQUE. IL EST BASE SUR LA RESOLUTION DE PROBLEMES D'OPTIMISATION NON LINEAIRES AVEC CONTRAINTES UTILISANT LA METHODE SQP (SEQUENTIAL QUADRATIC PROGRAMMING).
Download or read book Journal A written by and published by . This book was released on 1985 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optimization Methods and Applications written by Xiao-qi Yang and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book is dedicated to Professor N. U. Ahmed, a leading scholar and a renowned researcher in optimal control and optimization on the occasion of his retirement from the Department of Electrical Engineering at University of Ottawa in 1999. The contributions of this volume are in the areas of optimal control, non linear optimization and optimization applications. They are mainly the im proved and expanded versions of the papers selected from those presented in two special sessions of two international conferences. The first special session is Optimization Methods, which was organized by K. L. Teo and X. Q. Yang for the International Conference on Optimization and Variational Inequality, the City University of Hong Kong, Hong Kong, 1998. The other one is Optimal Control, which was organized byK. ~Teo and L. Caccetta for the Dynamic Control Congress, Ottawa, 1999. This volume is divided into three parts: Optimal Control; Optimization Methods; and Applications. The Optimal Control part is concerned with com putational methods, modeling and nonlinear systems. Three computational methods for solving optimal control problems are presented: (i) a regularization method for computing ill-conditioned optimal control problems, (ii) penalty function methods that appropriately handle final state equality constraints, and (iii) a multilevel optimization approach for the numerical solution of opti mal control problems. In the fourth paper, the worst-case optimal regulation involving linear time varying systems is formulated as a minimax optimal con trol problem.
Download or read book Mechatronic Futures written by Peter Hehenberger and published by Springer. This book was released on 2016-06-10 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering a comprehensive overview of the challenges, risks and options facing the future of mechatronics, this book provides insights into how these issues are currently assessed and managed. Building on the previously published book ‘Mechatronics in Action,’ it identifies and discusses the key issues likely to impact on future mechatronic systems. It supports mechatronics practitioners in identifying key areas in design, modeling and technology and places these in the wider context of concepts such as cyber-physical systems and the Internet of Things. For educators it considers the potential effects of developments in these areas on mechatronic course design, and ways of integrating these. Written by experts in the field, it explores topics including systems integration, design, modeling, privacy, ethics and future application domains. Highlighting novel innovation directions, it is intended for academics, engineers and students working in the field of mechatronics, particularly those developing new concepts, methods and ideas.
Download or read book Process Engineering and Industrial Management written by Jean-Pierre Dal Pont and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Engineering, the science and art of transforming raw materials and energy into a vast array of commercial materials, was conceived at the end of the 19th Century. Its history in the role of the Process Industries has been quite honorable, and techniques and products have contributed to improve health, welfare and quality of life. Today, industrial enterprises, which are still a major source of wealth, have to deal with new challenges in a global world. They need to reconsider their strategy taking into account environmental constraints, social requirements, profit, competition, and resource depletion. “Systems thinking” is a prerequisite from process development at the lab level to good project management. New manufacturing concepts have to be considered, taking into account LCA, supply chain management, recycling, plant flexibility, continuous development, process intensification and innovation. This book combines experience from academia and industry in the field of industrialization, i.e. in all processes involved in the conversion of research into successful operations. Enterprises are facing major challenges in a world of fierce competition and globalization. Process engineering techniques provide Process Industries with the necessary tools to cope with these issues. The chapters of this book give a new approach to the management of technology, projects and manufacturing. Contents Part 1: The Company as of Today 1. The Industrial Company: its Purpose, History, Context, and its Tomorrow?, Jean-Pierre Dal Pont. 2. The Two Modes of Operation of the Company – Operational and Entrepreneurial, Jean-Pierre Dal Pont. 3. The Strategic Management of the Company: Industrial Aspects, Jean-Pierre Dal Pont. Part 2: Process Development and Industrialization 4. Chemical Engineering and Process Engineering, Jean-Pierre Dal Pont. 5. Foundations of Process Industrialization, Jean-François Joly. 6. The Industrialization Process: Preliminary Projects, Jean-Pierre Dal Pont and Michel Royer. 7. Lifecycle Analysis and Eco-Design: Innovation Tools for Sustainable Industrial Chemistry, Sylvain Caillol. 8. Methods for Design and Evaluation of Sustainable Processes and Industrial Systems, Catherine Azzaro-Pantel. 9. Project Management Techniques: Engineering, Jean-Pierre Dal Pont. Part 3: The Necessary Adaptation of the Company for the Future 10. Japanese Methods, Jean-Pierre Dal Pont. 11. Innovation in Chemical Engineering Industries, Oliver Potier and Mauricio Camargo. 12. The Place of Intensified Processes in the Plant of the Future, Laurent Falk. 13. Change Management, Jean-Pierre Dal Pont. 14. The Plant of the Future, Jean-Pierre Dal Pont.
Download or read book ICREEC 2019 written by Ahmed Belasri and published by Springer Nature. This book was released on 2020-06-10 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights peer reviewed articles from the 1st International Conference on Renewable Energy and Energy Conversion, ICREEC 2019, held at Oran in Algeria. It presents recent advances, brings together researchers and professionals in the area and presents a platform to exchange ideas and establish opportunities for a sustainable future. Topics covered in this proceedings, but not limited to, are photovoltaic systems, bioenergy, laser and plasma technology, fluid and flow for energy, software for energy and impact of energy on the environment.
Download or read book Analytic Methods for Design Practice written by Gyung-Jin Park and published by Springer Science & Business Media. This book was released on 2007-05-31 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the world of modern engineering, rigorous and definite design methodologies are needed. However, many parts of engineering design are performed in either an ad-hoc manner or based on the intuition of the engineer. This is the first book to look at both stages of the design process – conceptual design and detailed design – and detail design methodologies for every step of the design process. Case studies show how practical design problems can be solved with analytic design methods. This book is an excellent introduction to the subject. The book’s practical focus will make the book useful to practicing engineers as a practical handbook of design.
Download or read book Advances in Safety Reliability and Risk Management written by Christophe Berenguer and published by CRC Press. This book was released on 2011-08-31 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering a wide range of topics on safety, reliability and risk management, the present publication will be of interest to academics and professionals working in a wide range of scientific, industrial and governmental sectors, including: Aeronautics and Aerospace; Chemical and Process Industry; Civil Engineering; Critical Infrastructures; Energy; Information Technology and Telecommunications; Land Transportation; Manufacturing; Maritime Transportation; Mechanical Engineering; Natural Hazards; Nuclear Industry; Offshore Industry; Policy Making and Public Planning.
Download or read book Neural Networks written by Gérard Dreyfus and published by Springer Science & Business Media. This book was released on 2005-11-25 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Neural networks represent a powerful data processing technique that has reached maturity and broad application. When clearly understood and appropriately used, they are a mandatory component in the toolbox of any engineer who wants make the best use of the available data, in order to build models, make predictions, mine data, recognize shapes or signals, etc. Ranging from theoretical foundations to real-life applications, this book is intended to provide engineers and researchers with clear methodologies for taking advantage of neural networks in industrial, financial or banking applications, many instances of which are presented in the book. For the benefit of readers wishing to gain deeper knowledge of the topics, the book features appendices that provide theoretical details for greater insight, and algorithmic details for efficient programming and implementation. The chapters have been written by experts and edited to present a coherent and comprehensive, yet not redundant, practically oriented introduction.
Download or read book Recent Advances in Integrated Design and Manufacturing in Mechanical Engineering written by Grigore Gogu and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in the integration and the optimization of product design and manufacturing systems. The book is divided into 3 chapters corresponding to the following three main topics : - optimization of product design process (mechanical design process, mass customization, modeling the product representation, computer support for engineering design, support systems for tolerancing, simulation and optimization tools for structures and for mechanisms and robots), -optimization of manufacturing systems (multi-criteria optimization and fuzzy volumes, tooth path generation, machine-tools behavior, surface integrity and precision, process simulation), - methodological aspects of integrated design and manufacturing (solid modeling, collaborative tools and knowledge formalization, integrating product and process design and innovation, robust and reliable design, multi-agent approach in VR environment). The present book is of interest to engineers, researchers, academic staff, and postgraduate students interested in integrated design and manufacturing in mechanical engineering.
Download or read book Global Production Management written by Kai Mertins and published by Springer. This book was released on 2013-04-17 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing case studies and research findings, this book deals with methods and tools suitable for designing, managing, and controlling processes within the supply chain. The authors are leading experts within the international community in the field of production management.
Download or read book Computer aided Tolerancing written by Fumihiko Kimura and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory and practice of tolerances are very important for designing and manufacturing engineering artifacts on a rational basis. Tolerance specifies a degree of "discrepancy" between an idealized object and its physical realization. Such discrepancy inevitably comes into our product realization processes because of practical cost consideration or our inability to fully control manufacturing processes. Major product and production characteristics which are affected by tolerances are product quality and cost. For achieving high precision machines tight tolerance specification is necessary, but this will normally increase product cost. In order to optimally compromise the conflicting requirements of quality and cost, it is essential to take into account of the total product life cycle throughout product planning, design, manufacturing, maintenance and recycling. For example, in order to construct durable products under severe working conditions, low sensitivity of product functionality with respect to tolerances is required. In future, re-use of components or parts will become important, and tolerance synthesis with respect to this aspect will be an interesting future research topics.
Download or read book Hierarchy in Natural and Social Sciences written by Denise Pumain and published by Springer Science & Business Media. This book was released on 2005-11-15 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hierarchy is a form of organisation of complex systems that rely on or produce a strong differentiation in capacity (power and size) between the parts of the system. It is frequently observed within the natural living world as well as in social institutions. According to the authors, hierarchy results from random processes, follows an intentional design, or is the result of the organisation which ensures an optimal circulation of energy for information. This book reviews ancient and modern representations and explanations of hierarchies, and compares their relevance in a variety of fields, such as language, societies, cities, and living species. It throws light on concepts and models such as scaling laws, fractals and self-organisation that are fundamental in the dynamics and morphology of complex systems. At a time when networks are celebrated for their efficiency, flexibility and better social acceptance, much can be learned about the persistent universality and adaptability of hierarchies, and from the analogies and differences between biological and social organisation and processes. This book addresses a wide audience of biologists and social scientists, as well as managers and executives in a variety of institutions.
Download or read book Multiphysics Modelling and Simulation for Systems Design and Monitoring written by Mohamed Haddar and published by Springer. This book was released on 2016-10-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on the state of the art in the field of multiphysics systems. It consists of accurately reviewed contributions to the MMSSD’2014 conference, which was held from December 17 to 19, 2004 in Hammamet, Tunisia. The different chapters, covering new theories, methods and a number of case studies, provide readers with an up-to-date picture of multiphysics modeling and simulation. They highlight the role played by high-performance computing and newly available software in promoting the study of multiphysics coupling effects, and show how these technologies can be practically implemented to bring about significant improvements in the field of design, control and monitoring of machines. In addition to providing a detailed description of the methods and their applications, the book also identifies new research issues, challenges and opportunities, thus providing researchers and practitioners with both technical information to support their daily work and a new source of inspiration for their future research.
Download or read book Advanced Design and Manufacturing Based on STEP written by Xun Xu and published by Springer Science & Business Media. This book was released on 2009-09-29 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and manufacturing is the essential element in any product development lifecycle. Industry vendors and users have been seeking a common language to be used for the entire product development lifecycle that can describe design, manufacturing and other data pertaining to the product. Many solutions were proposed, the most successful being the Stadndard for Exchange of Product model (STEP). STEP provides a mechanism that is capable of describing product data, independent from any particular system. The nature of this description makes it suitable not only for neutral file exchange, but also as a basis for implementing, sharing and archiving product databases. ISO 10303-AP203 is the first and perhaps the most successful AP developed to exchange design data between different CAD systems. Going from geometric data (as in AP203) to features (as in AP224) represents an important step towards having the right type of data in a STEP-based CAD/CAM system. Of particular significance is the publication of STEP-NC, as an extension of STEP to NC, utilising feature-based concepts for CNC machining purposes. The aim of this book is to provide a snapshot of the recent research outcomes and implementation cases in the field of design and manufacturing where STEP is used as the primary data representation protocol. The 20 chapters are contributed by authors from most of the top research teams in the world. These research teams are based in national research institutes, industries as well as universities.
Download or read book AMST 05 Advanced Manufacturing Systems and Technology written by Elso Kuljanic and published by Springer Science & Business Media. This book was released on 2005-07-01 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing a product is not difficult, the difficulty consists in manufacturing a product of high quality, at a low cost and rapidly. Drastic technological advances are changing global markets very rapidly. In such conditions the ability to compete successfully must be based on innovative ideas and new products which has to be of high quality yet low in price. One way to achieve these objecti ves would be through massive investments in research of computer based technology and by applying the approaches presented in this book. The First International Conference on Advanced Manufacturing Systems and Technology AMST87 was held in Opatija (Croatia) in October 1987. The Second International Conference on Advanced Manufacturing Systems and Technology AMSV90 was held in Trento (Italy) in lune 1990. The Third, Fourth, Fifth and Sixth Conferences on Advanced Manufacturing Systems and Technology were all held in Udine (Italy) as follows: AMST93 in April 1993, AMST96 in September 1996, AMST99 in June 1999 and AMST02 in June 2002.
Download or read book Faecal Sludge Management written by Linda Strande and published by IWA Publishing. This book was released on 2014-08-15 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is estimated that literally billions of residents in urban and peri-urban areas of Africa, Asia, and Latin America are served by onsite sanitation systems (e.g. various types of latrines and septic tanks). Until recently, the management of faecal sludge from these onsite systems has been grossly neglected, partially as a result of them being considered temporary solutions until sewer-based systems could be implemented. However, the perception of onsite or decentralized sanitation technologies for urban areas is gradually changing, and is increasingly being considered as long-term, sustainable options in urban areas, especially in low- and middle-income countries that lack sewer infrastructures. This is the first book dedicated to faecal sludge management. It compiles the current state of knowledge of the rapidly evolving field of faecal sludge management, and presents an integrated approach that includes technology, management, and planning based on Sandecs 20 years of experience in the field. Faecal Sludge Management: Systems Approach for Implementation and Operation addresses the organization of the entire faecal sludge management service chain, from the collection and transport of sludge, and the current state of knowledge of treatment options, to the final end use or disposal of treated sludge. The book also presents important factors to consider when evaluating and upscaling new treatment technology options. The book is designed for undergraduate and graduate students, and engineers and practitioners in the field who have some basic knowledge of environmental and/or wastewater engineering.
