Download or read book Simulation of Supersonic Jet Noise with the Adaptation of Overflow CFD Code and Kirchhoff Surface Integral written by and published by . This book was released on 2001 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Simulation of Supersonic Jet Noise with the Adaptation of Overflow Cfd Code and Kirchhoff Surface Integral written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-19 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: An acoustic prediction capability for supersonic axisymmetric jets was developed on the basis of OVERFLOW Navier-Stokes CFD (Computational Fluid Dynamics) code of NASA Langley Research Center. Reynolds-averaged turbulent stresses in the flow field are modeled with the aid of Spalart-Allmaras one-equation turbulence model. Appropriate acoustic and outflow boundary conditions were implemented to compute time-dependent acoustic pressure in the nonlinear source-field. Based on the specification of acoustic pressure, its temporal and normal derivatives on the Kirchhoff surface, the near-field and the far-field sound pressure levels are computed via Kirchhoff surface integral, with the Kirchhoff surface chosen to enclose the nonlinear sound source region described by the CFD code. The methods are validated by a comparison of the predictions of sound pressure levels with the available data for an axisymmetric turbulent supersonic (Mach 2) perfectly expanded jet. Kandula, Max and Caimi, Raoul and Steinrock, T. (Technical Monitor) Kennedy Space Center NASA/TM-2001-210263, NAS 1.15:210263
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 2003 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Identification of Near Sound Field Boundary and Far Field Noise Predictions written by Kyong Sang Lee and published by . This book was released on 2007 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Development of Aerospace Vehicles and Propulsion Systems written by S. Kishore Kumar and published by Springer Nature. This book was released on 2021-03-18 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers presented in the Symposium on Applied Aerodynamics and Design of Aerospace Vehicles (SAROD 2018), which was jointly organized by Aeronautical Development Agency (the nodal agency for the design and development of combat aircraft in India), Gas-Turbine Research Establishment (responsible for design and development of gas turbine engines for military applications), and CSIR-National Aerospace Laboratories (involved in major aerospace programs in the country such as SARAS program, LCA, Space Launch Vehicles, Missiles and UAVs). It brings together experiences of aerodynamicists in India as well as abroad in Aerospace Vehicle Design, Gas Turbine Engines, Missiles and related areas. It is a useful volume for researchers, professionals and students interested in diversified areas of aerospace engineering.
Download or read book OpenFOAM written by J. Miguel Nóbrega and published by Springer. This book was released on 2019-01-24 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected papers of the 11th OpenFOAM® Workshop that was held in Guimarães, Portugal, June 26 - 30, 2016. The 11th OpenFOAM® Workshop had more than 140 technical/scientific presentations and 30 courses, and was attended by circa 300 individuals, representing 180 institutions and 30 countries, from all continents. The OpenFOAM® Workshop provided a forum for researchers, industrial users, software developers, consultants and academics working with OpenFOAM® technology. The central part of the Workshop was the two-day conference, where presentations and posters on industrial applications and academic research were shown. OpenFOAM® (Open Source Field Operation and Manipulation) is a free, open source computational toolbox that has a larger user base across most areas of engineering and science, from both commercial and academic organizations. As a technology, OpenFOAM® provides an extensive range of features to solve anything from complex fluid flows involving chemical reactions, turbulence and heat transfer, to solid dynamics and electromagnetics, among several others. Additionally, the OpenFOAM technology offers complete freedom to customize and extend its functionalities.
Download or read book A Dictionary of Chemical Engineering written by Carl Schaschke and published by OUP Oxford. This book was released on 2014-01-09 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Dictionary of Chemical Engineering is one of the latest additions to the market leading Oxford Paperback Reference series. In over 3,400 concise and authoritative A to Z entries, it provides definitions and explanations for chemical engineering terms in areas including: materials, energy balances, reactions, separations, sustainability, safety, and ethics. Naturally, the dictionary also covers many pertinent terms from the fields of chemistry, physics, biology, and mathematics. Useful entry-level web links are listed and regularly updated on a dedicated companion website to expand the coverage of the dictionary. Comprehensively cross-referenced and complemented by over 60 line drawings, this excellent new volume is the most authoritative dictionary of its kind. It is an essential reference source for students of chemical engineering, for professionals in this field (as well as related disciplines such as applied chemistry, chemical technology, and process engineering), and for anyone with an interest in the subject.
Download or read book Advances in Automatic Differentiation written by Christian H. Bischof and published by Springer Science & Business Media. This book was released on 2008-08-17 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fifth International Conference on Automatic Differentiation held from August 11 to 15, 2008 in Bonn, Germany, is the most recent one in a series that began in Breckenridge, USA, in 1991 and continued in Santa Fe, USA, in 1996, Nice, France, in 2000 and Chicago, USA, in 2004. The 31 papers included in these proceedings re?ect the state of the art in automatic differentiation (AD) with respect to theory, applications, and tool development. Overall, 53 authors from institutions in 9 countries contributed, demonstrating the worldwide acceptance of AD technology in computational science. Recently it was shown that the problem underlying AD is indeed NP-hard, f- mally proving the inherently challenging nature of this technology. So, most likely, no deterministic “silver bullet” polynomial algorithm can be devised that delivers optimum performance for general codes. In this context, the exploitation of doma- speci?c structural information is a driving issue in advancing practical AD tool and algorithm development. This trend is prominently re?ected in many of the pub- cations in this volume, not only in a better understanding of the interplay of AD and certain mathematical paradigms, but in particular in the use of hierarchical AD approaches that judiciously employ general AD techniques in application-speci?c - gorithmic harnesses. In this context, the understanding of structures such as sparsity of derivatives, or generalizations of this concept like scarcity, plays a critical role, in particular for higher derivative computations.
Download or read book Experimental Investigation of a Large scale Two dimensional Mixed compression Inlet System written by Norman D. Wong and published by . This book was released on 1971 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: A large-scale, variable-geometry inlet model with a design Mach number of 3.0 was tested at Mach numbers from 1.55 to 3.2. Variable features of the inlet for off-design operation are an adjustable-height ramp system and a translating cowl. This report presents experimental results for a diffuser and boundary-layer bleed configuration which was optimized at the design Mach number. Overall performance was high with throat-mounted vortex generators, which were effective in reducing flow distortion in the subsonic diffuser at the higher Mach numbers.
Download or read book Complexity and Control written by Vladimir G. Ivancevic and published by World Scientific Publishing Company Incorporated. This book was released on 2015 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book Complexity and Control: Towards a Rigorous Behavioral Theory of Complex Dynamical Systems is a graduate-level monographic textbook, intended to be a novel and rigorous contribution to modern Complexity Theory.This book contains 11 chapters and is designed as a one-semester course for engineers, applied and pure mathematicians, theoretical and experimental physicists, computer and economic scientists, theoretical chemists and biologists, as well as all mathematically educated scientists and students, both in industry and academia, interested in predicting and controlling complex dynamical systems of arbitrary nature.
Download or read book Introduction to Generalized Functions with Applications in Aerodynamics and Aeroacoustics written by F. Farassat and published by . This book was released on 1994 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Structural and Multidisciplinary Optimization written by Axel Schumacher and published by Springer. This book was released on 2017-12-04 with total page 2101 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume includes papers from the WSCMO conference in Braunschweig 2017 presenting research of all aspects of the optimal design of structures as well as multidisciplinary design optimization where the involved disciplines deal with the analysis of solids, fluids or other field problems. Also presented are practical applications of optimization methods and the corresponding software development in all branches of technology.
Download or read book Fundamentals of Metallurgy written by S Seetharaman and published by Elsevier. This book was released on 2005-10-10 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: As product specifications become more demanding, manufacturers require steel with ever more specific functional properties. As a result, there has been a wealth of research on how those properties emerge during steelmaking. Fundamentals of metallurgy summarises this research and its implications for manufacturers.The first part of the book reviews the effects of processing on the properties of metals with a range of chapters on such phenomena as phase transformations, types of kinetic reaction, transport and interfacial phenomena. Authors discuss how these processes and the resulting properties of metals can be modelled and predicted. Part two discusses the implications of this research for improving steelmaking and steel properties.With its distinguished editor and international team of contributors, Fundamentals of metallurgy is an invaluable reference for steelmakers and manufacturers requiring high-performance steels in such areas as automotive and aerospace engineering. It will also be useful for those dealing with non-ferrous metals and alloys, material designers for functional materials, environmentalists and above all, high technology industries designing processes towards materials with tailored properties. - Summarises key research and its implications for manufacturers - Essential reading for steelmakers and manufacturers - Written by leading experts from both industry and academia
Download or read book Computational Techniques for Multiphase Flows written by Guan Heng Yeoh and published by Elsevier. This book was released on 2009-10-07 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mixed or multiphase flows of solid/liquid or solid/gas are commonly found in many industrial fields, and their behavior is complex and difficult to predict in many cases. The use of computational fluid dynamics (CFD) has emerged as a powerful tool for the understanding of fluid mechanics in multiphase reactors, which are widely used in the chemical, petroleum, mining, food, beverage and pharmaceutical industries. Computational Techniques for Multiphase Flows enables scientists and engineers to the undertand the basis and application of CFD in muliphase flow, explains how to use the technique, when to use it and how to interpret the results and apply them to improving aplications in process enginering and other multiphase application areas including the pumping, automotive and energy sectors. - Understandable guide to a complex subject - Important in many industries - Ideal for potential users of CFD
Download or read book Generation of a Composite Grid for Turbine Flows and Consideration of a Numerical Scheme written by Y. Choo and published by . This book was released on 1986 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: A composite grid was generated for flows in turbines. It consisted of the C-grid (or O-grid) in the immediate vicinity of the blade and the H-grid in the middle of the blade passage between the C-grids and in the upstream region. This new composite grid provides better smoothness, resolution, orthogonality than any single grid for a typical turbine blade with a large camber and rounded leading and trailing edges. The C-H (or O-H) composite grid has an unusual grid point that is connected to more than four neighboring nodes in two dimensions (more than six neighboring nodes in three dimensions). A finite-volume lower-upper (LU) implicit scheme to be used on this poses no problem and requires no special treatment because each interior cell of this composite grid has only four neighboring cells in two dimensions (six cells in three dimensions). The LU implicit scheme was demonstrated to be efficient and robust for external flows in a broad flow regime and can be easily applied to internal flows and extended from two to three dimensions.
Download or read book Standard Handbook for Aerospace Engineers Second Edition written by Brij N. Agrawal and published by McGraw Hill Professional. This book was released on 2018-02-26 with total page 1393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. A single source of essential information for aerospace engineers This fully revised resource presents theories and practices from more than 50 specialists in the many sub-disciplines of aeronautical and astronautical engineering—all under one cover. The Standard Handbook for Aerospace Engineers, Second Edition, contains complete details on classic designs as well as the latest techniques, materials, and processes used in aviation, defense, and space systems. You will get insightful, practical coverage of the gamut of aerospace engineering technologies along with hundreds of informative diagrams, charts, and graphs. Standard Handbook for Aerospace Engineers, Second Edition covers: •Futures of aerospace •Aircraft systems •Aerodynamics, aeroelasticity, and acoustics •Aircraft performance •Aircraft flight mechanics, stability, and control •Avionics and air traffic management systems •Aeronautical design •Spacecraft design •Astrodynamics •Rockets and launch vehicles •Earth’s environment and space •Attitude dynamics and control
Download or read book The Numerical Solution of Nonlinear Problems written by Christopher T. H. Baker and published by Oxford University Press, USA. This book was released on 1981 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
