Download or read book Simulation of Some Power System Control System and Power Electronics Case Studies Using Matlab and PowerWorld Simulator written by Dr. Hedaya Mahmood Alasooly and published by BookRix. This book was released on 2021-01-11 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book consists from three parts concerning simulation of some power system, control system and power electronics case studies using matlab and powerworld simulator programs • Part A: Simulation of Some Power Electronics Case Studies in Matlab Simpowersystem Blockset: • Part B: Control of DC Motor Using Different Control Strategies in Matlab: • Part C: Investigation of the Usefulness of the PowerWorld Simulator Program Developed by “Glover, Overbye & Sarma” in the Solution of Power System Problems: I. Part A: Simulation of Some Power Electronics Case Studies in Matlab Simpowersystem Blockset: This part covers some case studies that provide detailed, realistic examples of how to use SimPowerSystems in modeling power system dynamics in various types of application that use power electronics converters. The following case studies are simulated on the paper: 1- Thyristor-Based Static Var Compensator. 2. Transient Stability of a Power System with SVC and PSS. 3. GTO-Based STATCOM. 4. Control of load flow using UPFC. 5- Control of AC motor. 6- Control of DC motor. 7- VSC-Based HVDC Link. II. Part B: Control of DC Motor Using Different Control Strategies in Matlab: A simple model of a DC motor driving an inertial load has the angular speed of the load, , as the output and applied voltage, , as the input. The system was used as an example in [1]. The ultimate goal of this paper is to control the angular rate by varying the applied voltage using different control strategies for comparison purpose. The comparision is made between the proptional controller, integral controller, propotional and integral controller, phase lag compensator, derivitive controller, lead integral compensator, lead lag compensator, PID controller and the the linear quadratic tracker design based on the optimal control theory. III. Part C: Investigation of the Usefulness of the PowerWorld Simulator Program Developed by “Glover, Overbye & Sarma” in the Solution of Power System Problems: The objective of this part is to investigate the usefulness of the power system simulator PowerWorld program developed by “Glover, Overbye &Sarma”. The results obtained from the power simulator program were presented for different case studies. The power system network used in this study consists from 6 buses. Area 1 includes bus 1-5 while Bus 6 will be part of Area 1 in some case studies, or will form separate area 2 in other case studies for comparison purpose. Note that the Available Transfer Capability (ATC) analysis add-on which determines the maximum MW transfer possible between two parts of a power system without violating any limits, and the voltage adequacy and stability tool (VAST) add-on that can solve multiple power flow solutions in order to generate a PV curve for a particular transfer or a QV curve at a given bus, was not studied here because we don’t have yet VAST add-on and the ATC add-on packages.

Download or read book Simulation of Some Power Electronics Case Studies in Matlab Simpowersystem Blockset written by Dr. Hidaia Mahmood Alassouli and published by Dr. Hidaia Mahmood Alassouli. This book was released on 2020-06-19 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: Matlab SimPowerSystems is a modern design tool that allows scientists and engineers to rapidly and easily build models that simulate power systems. Not only can you draw the circuit topology rapidly, but your analysis of the circuit can include interactions with mechanical, thermal, control, and other disciplines. The paper covers some case studies that provide detailed, realistic examples of how to use SimPowerSystems in power system analysis. The following types of studies are covered on the paper:1. Thyristor-Based Static Var Compensator: Study the steady-state and dynamic performance of a static var compensator (SVC) on a transmission system.2. Transient Stability of a Power System with SVC and PSS: Study of the application of static var compensator (SVC) and power system stabilizers (PSS) to improve transient stability and power oscillation damping of the system. 3. GTO-Based STATCOM: Study the steady-state and dynamic performance of a static synchronous compensator (STATCOM) on a transmission system. 4. Control of load flow using UPFC: Study the steady-state and dynamic performance of a unified power flow controller (UPFC).5. Variable-frequency Induction Motor Drive: Study of a PWM inverter is used as a variable-voltage, variable-frequency source to drive an induction motor in variable-speed operation.6. Chopper-Fed DC Motor Drive: Study of a DC motor drive with armature voltage controlled by a GTO thyristor chopper.7. VSC-Based HVDC Link: Modeling of a forced-commutated voltage-sourced converter high-voltage direct current (VSC-HVDC) transmission link.

Download or read book Simulation of Some Power Electronics Case Studies In Matlab Simpowersystem Toolbox written by Dr. Hidaia Mahmood Alassouli and published by Lulu.com. This book was released on with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Some Power Electronics Case Studies Using Matlab Simpowersystem Blockset written by Dr. Hidaia Mahmood Alassouli and published by Dr. Hidaia Mahmood Alassouli. This book was released on 2021-04-19 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: Matlab SimPowerSystems is a modern design tool that allows scientists and engineers to rapidly and easily build models that simulate power systems. Not only can you draw the circuit topology rapidly, but your analysis of the circuit can include interactions with mechanical, thermal, control, and other disciplines. The paper covers some case studies that provide detailed, realistic examples of how to use SimPowerSystems in power system analysis. The following types of studies are covered on the paper: 1. Thyristor-Based Static Var Compensator: Study the steady-state and dynamic performance of a static var compensator (SVC) on a transmission system. 2. Transient Stability of a Power System with SVC and PSS: Study of the application of static var compensator (SVC) and power system stabilizers (PSS) to improve transient stability and power oscillation damping of the system. 3. GTO-Based STATCOM: Study the steady-state and dynamic performance of a static synchronous compensator (STATCOM) on a transmission system. 4. Control of load flow using UPFC: Study the steady-state and dynamic performance of a unified power flow controller (UPFC). 5. Variable-frequency Induction Motor Drive: Study of a PWM inverter is used as a variable-voltage, variable-frequency source to drive an induction motor in variable-speed operation. 6. Chopper-Fed DC Motor Drive: Study of a DC motor drive with armature voltage controlled by a GTO thyristor chopper. 7. VSC-Based HVDC Link: Modeling of a forced-commutated voltage-sourced converter high-voltage direct current (VSC-HVDC) transmission link.

Download or read book Simulation of Some Power System Control System and Power Electronics Case Studies Using Matlab and PowerWorld Simulator Programs written by Hedaia Mahmood Al-Assouli and published by . This book was released on 2020-12-25 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book consists from three parts concerning simulation of some power system, control system and power electronics case studies using matlab and powerworld simulator programs - Part A: Simulation of Some Power Electronics Case Studies in Matlab Simpowersystem Blockset: - Part B: Control of DC Motor Using Different Control Strategies in Matlab: - Part C: Investigation of the Usefulness of the PowerWorld Simulator Program Developed by "Glover, Overbye & Sarma" in the Solution of Power System Problems: I. Part A: Simulation of Some Power Electronics Case Studies in Matlab Simpowersystem Blockset: This part covers some case studies that provide detailed, realistic examples of how to use SimPowerSystems in modeling power system dynamics in various types of application that use power electronics converters. The following case studies are simulated on the paper: 1- Thyristor-Based Static Var Compensator. 2. Transient Stability of a Power System with SVC and PSS. 3. GTO-Based STATCOM. 4. Control of load flow using UPFC. 5- Control of AC motor. 6- Control of DC motor. 7- VSC-Based HVDC Link. II. Part B: Control of DC Motor Using Different Control Strategies in Matlab: A simple model of a DC motor driving an inertial load has the angular speed of the load, as the output and applied voltage, as the input. The system was used as an example in [1]. The ultimate goal of this paper is to control the angular rate by varying the applied voltage using different control strategies for comparison purpose. The comparision is made between the proptional controller, integral controller, propotional and integral controller, phase lag compensator, derivitive controller, lead integral compensator, lead lag compensator, PID controller and the the linear quadratic tracker design based on the optimal control theory. III. Part C: Investigation of the Usefulness of the PowerWorld Simulator Program Developed by "Glover, Overbye & Sarma" in the Solution of Power System Problems: The objective of this part is to investigate the usefulness of the power system simulator PowerWorld program developed by "Glover, Overbye &Sarma". The results obtained from the power simulator program were presented for different case studies. The power system network used in this study consists from 6 buses. Area 1 includes bus 1-5 while Bus 6 will be part of Area 1 in some case studies, or will form separate area 2 in other case studies for comparison purpose.

Download or read book Simulation of Some Power System Control System and Power Electronics Case Studies Using Matlab and PowerWorld Simulator Programs written by Alassouli Dr. Hidaia Mahmood Alassouli and published by . This book was released on 2021 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Power Electronics for Renewable and Distributed Energy Systems written by Sudipta Chakraborty and published by Springer Science & Business Media. This book was released on 2013-06-12 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: While most books approach power electronics and renewable energy as two separate subjects, Power Electronics for Renewable and Distributed Energy Systems takes an integrative approach; discussing power electronic converters topologies, controls and integration that are specific to the renewable and distributed energy system applications. An overview of power electronic technologies is followed by the introduction of various renewable and distributed energy resources that includes photovoltaics, wind, small hydroelectric, fuel cells, microturbines and variable speed generation. Energy storage systems such as battery and fast response storage systems are discussed along with application-specific examples. After setting forth the fundamentals, the chapters focus on more complex topics such as modular power electronics, microgrids and smart grids for integrating renewable and distributed energy. Emerging topics such as advanced electric vehicles and distributed control paradigm for power system control are discussed in the last two chapters. With contributions from subject matter experts, the diagrams and detailed examples provided in each chapter make Power Electronics for Renewable and Distributed Energy Systems a sourcebook for electrical engineers and consultants working to deploy various renewable and distributed energy systems and can serve as a comprehensive guide for the upper-level undergraduates and graduate students across the globe.

Download or read book Power System Analysis written by John Grainger and published by McGraw-Hill Companies. This book was released on 1994 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated edition includes: coverage of power-system estimation, including current developments in the field; discussion of system control, which is a key topic covering economic factors of line losses and penalty factors; and new problems and examples throughout.

Download or read book Smart Microgrids written by Sasi K. Kottayil and published by CRC Press. This book was released on 2020-08-17 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the need to understand the development, use, construction, and operation of smart microgrids (SMG). Covering selected major operations of SMG like dynamic energy management, demand response, and demand dispatch, it describes the design and operational challenges of different microgrids and provides feasible solutions for systems. Smart Micro Grid presents communication technologies and governing standards used in developing communication networks for realizing various smart services and applications in microgrids. An architecture facilitating bidirectional communication for smart distribution/microgrid is brought out covering aspects of its design, development and validation. The book is aimed at graduate, research students and professionals in power, power systems, and power electronics. Features: • Covers a broad overview of the benefits, the design and operation requirements, standards and communication requirements for deploying microgrids in distribution systems. • Explores issues related to planning, expansion, operation, type of microgrids, interaction among microgrid and distribution networks, demand response, and the technical requirements for the communication network. • Discusses current standards and common practices to develop and operate microgrids. • Describes technical issues and requirements for operating microgrids. • Illustrates smart communication architecture and protocols.

Download or read book Matlab Modelling Programming and Simulations written by Emilson Pereira Leite and published by A B M Nasiruzzaman. This book was released on 2010 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electric Power Annual written by and published by . This book was released on 1990 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides industry data on electric power, including generating capability, generation, fuel consumption, cost of fuels, and retail sales and revenue.

Download or read book Modelling Control and Stability Analysis of Photovoltaic Systems in Power System Dynamic Studies written by Gustav Lammert and published by kassel university press GmbH. This book was released on 2019 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis investigates the impact of: i) the low voltage ride-through and dynamic voltage support capability; ii) the active current recovery rate; iii) the local voltage control; and iv) the plant-level voltage control of large-scale photovoltaic systems on short-term voltage stability and fault-induced delayed voltage recovery as well as transient and frequency stability. The power system dynamic performance is analysed using state-of-the-art methods, such as phasor mode time-domain simulations and the calculation of the critical clearing time that determines the stability margin. Moreover, the recently developed Kullback-Leibler divergence measure is applied to assess the quality of the voltage recovery. Drawbacks of this metric are outlined and a novel metric, the so-called voltage recovery index, is defined that quantifies the delayed voltage recovery more systematically. The studies are performed with a generic photovoltaic system model and typical model parameters are used that were determined in collaboration with a manufacturer. The stability analysis is performed in DIgSILENT PowerFactory using: i) a one-load infinite-bus system; and ii) an IEEE multi-machine voltage stability test system, namely the Nordic test system. The results show that with the adequate control of photovoltaic systems, power system dynamic performance can be significantly improved.

Download or read book High Performance Computing in Power and Energy Systems written by Siddhartha Kumar Khaitan and published by Springer Science & Business Media. This book was released on 2012-09-07 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: The twin challenge of meeting global energy demands in the face of growing economies and populations and restricting greenhouse gas emissions is one of the most daunting ones that humanity has ever faced. Smart electrical generation and distribution infrastructure will play a crucial role in meeting these challenges. We would need to develop capabilities to handle large volumes of data generated by the power system components like PMUs, DFRs and other data acquisition devices as well as by the capacity to process these data at high resolution via multi-scale and multi-period simulations, cascading and security analysis, interaction between hybrid systems (electric, transport, gas, oil, coal, etc.) and so on, to get meaningful information in real time to ensure a secure, reliable and stable power system grid. Advanced research on development and implementation of market-ready leading-edge high-speed enabling technologies and algorithms for solving real-time, dynamic, resource-critical problems will be required for dynamic security analysis targeted towards successful implementation of Smart Grid initiatives. This books aims to bring together some of the latest research developments as well as thoughts on the future research directions of the high performance computing applications in electric power systems planning, operations, security, markets, and grid integration of alternate sources of energy, etc.

Download or read book Research Methods for Cyber Security written by Thomas W. Edgar and published by Syngress. This book was released on 2017-04-19 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research Methods for Cyber Security teaches scientific methods for generating impactful knowledge, validating theories, and adding critical rigor to the cyber security field. This book shows how to develop a research plan, beginning by starting research with a question, then offers an introduction to the broad range of useful research methods for cyber security research: observational, mathematical, experimental, and applied. Each research method chapter concludes with recommended outlines and suggested templates for submission to peer reviewed venues. This book concludes with information on cross-cutting issues within cyber security research. Cyber security research contends with numerous unique issues, such as an extremely fast environment evolution, adversarial behavior, and the merging of natural and social science phenomena. Research Methods for Cyber Security addresses these concerns and much more by teaching readers not only the process of science in the context of cyber security research, but providing assistance in execution of research as well. - Presents research methods from a cyber security science perspective - Catalyzes the rigorous research necessary to propel the cyber security field forward - Provides a guided method selection for the type of research being conducted, presented in the context of real-world usage

Download or read book PowerFactory Applications for Power System Analysis written by Francisco M. Gonzalez-Longatt and published by Springer. This book was released on 2014-12-27 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive set of guidelines and applications of DIgSILENT PowerFactory, an advanced power system simulation software package, for different types of power systems studies. Written by specialists in the field, it combines expertise and years of experience in the use of DIgSILENT PowerFactory with a deep understanding of power systems analysis. These complementary approaches therefore provide a fresh perspective on how to model, simulate and analyse power systems. It presents methodological approaches for modelling of system components, including both classical and non-conventional devices used in generation, transmission and distribution systems, discussing relevant assumptions and implications on performance assessment. This background is complemented with several guidelines for advanced use of DSL and DPL languages as well as for interfacing with other software packages, which is of great value for creating and performing different types of steady-state and dynamic performance simulation analysis. All employed test case studies are provided as supporting material to the reader to ease recreation of all examples presented in the book as well as to facilitate their use in other cases related to planning and operation studies. Providing an invaluable resource for the formal instruction of power system undergraduate/postgraduate students, this book is also a useful reference for engineers working in power system operation and planning.

Download or read book Simulation and Analysis of Modern Power Systems written by Ranjana Sodhi and published by McGraw Hill Professional. This book was released on 2021-02-19 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. Master the modeling, analysis, and simulation of today’s power systems This comprehensive textbook discusses all the major modelling and simulation tools and techniques that a power engineer needs, and explains how those tools can be applied to modern power systems. The applications include loadflow studies, contingency analysis, transient and voltage stability studies, state estimation and phasor estimation studies, co-simulation studies. Written by a recognized expert in the field, Simulation and Analysis of Modern Power Systems contains real-world examples worked out in MATLAB, PSCA, and Power World EMTP and RTDS. You will get a thorough overview of power system fundamentals and learn, step by step, how to efficiently emulate and analyze the myriad components of modern power systems. The book introduces the most state-of-the-art power simulation tool available today, the Real Time Digital Simulator (RTDS) and its Hardware-In-Loop (HIL) capabilities. Explains how each technique is used in many essential applications Introduces the Real Time Digital Simulator (RTDS) and its Hardware-In-Loop (HIL) capabilities Written by a power systems expert and experienced educator

Download or read book Power System Control and Stability written by Paul M. Anderson and published by . This book was released on 1982 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: