Download or read book Simulation of ODE PDE Models with MATLAB OCTAVE and SCILAB written by Alain Vande Wouwer and published by Springer. This book was released on 2014-06-07 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation of ODE/PDE Models with MATLAB®, OCTAVE and SCILAB shows the reader how to exploit a fuller array of numerical methods for the analysis of complex scientific and engineering systems than is conventionally employed. The book is dedicated to numerical simulation of distributed parameter systems described by mixed systems of algebraic equations, ordinary differential equations (ODEs) and partial differential equations (PDEs). Special attention is paid to the numerical method of lines (MOL), a popular approach to the solution of time-dependent PDEs, which proceeds in two basic steps: spatial discretization and time integration. Besides conventional finite-difference and element techniques, more advanced spatial-approximation methods are examined in some detail, including nonoscillatory schemes and adaptive-grid approaches. A MOL toolbox has been developed within MATLAB®/OCTAVE/SCILAB. In addition to a set of spatial approximations and time integrators, this toolbox includes a collection of application examples, in specific areas, which can serve as templates for developing new programs. Simulation of ODE/PDE Models with MATLAB®, OCTAVE and SCILAB provides a practical introduction to some advanced computational techniques for dynamic system simulation, supported by many worked examples in the text, and a collection of codes available for download from the book’s page at www.springer.com. This text is suitable for self-study by practicing scientists and engineers and as a final-year undergraduate course or at the graduate level.
Download or read book Mathematical Modelling and Simulation in Chemical Engineering written by M. Chidambaram and published by Cambridge University Press. This book was released on 2018-03-09 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written in a clear, logical and concise manner, this comprehensive resource provides discussion on essential mathematical tools, required for upgraded system performance. Understanding of basic principles and governing laws is essential to reduce complexity of the system, and this guide offers detailed discussion on analytical and numerical techniques to solve mathematical model equations. Important concepts including nonlinear algebraic equations, initial value ordinary differential equations (ODEs) and boundary value ODEs are discussed in detail. The concepts of optimization methods and sensitivity analysis, which are important from subject point of view, are explained with suitable examples. Numerous problems and MATLAB®/Scilab exercises are interspersed throughout the text. Several case studies involving full details of simulation are offered for better understanding. The accompanying website will host additional MATLAB®/Scilab problems, model question papers, simulation exercises, tutorials and projects. This book will be useful for students of chemical engineering, mechanical engineering, instrumentation engineering and mathematics.
Download or read book Fractional order Systems and PID Controllers written by Kishore Bingi and published by Springer Nature. This book was released on 2019-10-31 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a detailed study on fractional-order, set-point, weighted PID control strategies and the development of curve-fitting-based approximation techniques for fractional-order parameters. Furthermore, in all the cases, it includes the Scilab-based commands and functions for easy implementation and better understanding, and to appeal to a wide range of readers working with the software. The presented Scilab-based toolbox is the first toolbox for fractional-order systems developed in open-source software. The toolboxes allow time and frequency domains as well as stability analysis of the fractional-order systems and controllers. The book also provides real-time examples of the control of process plants using the developed fractional-order based PID control strategies and the approximation techniques. The book is of interest to readers in the areas of fractional-order controllers, approximation techniques, process modeling, control, and optimization, both in industry and academia. In industry, the book is particularly valuable in the areas of research and development (R&D) as well as areas where PID controllers suffice – and it should be noted that around 80% of low-level controllers in industry are PID based. The book is also useful where conventional PIDs are constrained, such as in industries where long-term delay and non-linearity are present. Here it can be used for the design of controllers for real-time processes. The book is also a valuable teaching and learning resource for undergraduate and postgraduate students.
Download or read book Engineering Simulation and its Applications written by Xin-She Yang and published by Elsevier. This book was released on 2024-02-01 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Simulation and its Applications: Algorithms and Numerical Methods covers the essential quantitative methods needed for engineering simulations, introducing optimization techniques that can be used in the design of systems to minimize cost and maximize efficiency. This book serves as a reference and textbook for courses such as engineering simulation, design optimization, mathematical modeling, numerical methods, data analysis, and engineering management. Diverse coverage of the various subject areas within the field puts the essential topics into a single book for easy access for graduates and senior undergraduates. It also serves as a reference book for lecturers and industrial practitioners. - Introduces all essential algorithms and numerical methods - Balances theory and numerical techniques - Provides numerous worked examples
Download or read book Multi Objective Optimization in Theory and Practice II Metaheuristic Algorithms written by André A. Keller and published by Bentham Science Publishers. This book was released on 2019-03-28 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multi-Objective Optimization in Theory and Practice is a simplified two-part approach to multi-objective optimization (MOO) problems. This second part focuses on the use of metaheuristic algorithms in more challenging practical cases. The book includes ten chapters that cover several advanced MOO techniques. These include the determination of Pareto-optimal sets of solutions, metaheuristic algorithms, genetic search algorithms and evolution strategies, decomposition algorithms, hybridization of different metaheuristics, and many-objective (more than three objectives) optimization and parallel computation. The final section of the book presents information about the design and types of fifty test problems for which the Pareto-optimal front is approximated. For each of them, the package NSGA-II is used to approximate the Pareto-optimal front. It is an essential handbook for students and teachers involved in advanced optimization courses in engineering, information science and mathematics degree programs.
Download or read book Applications of Image Processing and Soft Computing Systems in Agriculture written by Razmjooy, Navid and published by IGI Global. This book was released on 2019-02-22 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: The variety and abundance of qualitative characteristics of agricultural products have been the main reasons for the development of different types of non-destructive methods (NDTs). Quality control of these products is one of the most important tasks in manufacturing processes. The use of control and automation has become more widespread, and new approaches provide opportunities for production competition through new technologies. Applications of Image Processing and Soft Computing Systems in Agriculture examines applications of artificial intelligence in agriculture and the main uses of shape analysis on agricultural products such as relationships between form and genetics, adaptation, product characteristics, and product sorting. Additionally, it provides insights developed through computer vision techniques. Highlighting such topics as deep learning, agribusiness, and augmented reality, it is designed for academicians, researchers, agricultural practitioners, and industry professionals.
Download or read book The Individual Microbe Single Cell Analysis and Agent Based Modelling written by Johan H. J. Leveau and published by Frontiers Media SA. This book was released on 2019-02-19 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent technological advances in single-cell microbiology, using flow cytometry, microfluidics, x-ray fluorescence microprobes, and single-cell -omics, allow for the observation of individuals within populations. Simultaneously, individual-based models (or more generally agent-based models) allow for individual microbes to be simulated. Bridging these techniques forms the foundation of individual-based ecology of microbes (µIBE). µIBE has elucidated genetic and phenotypic heterogeneity that has important consequences for a number of human interests, including antibiotic or biocide resistance, the productivity and stability of industrial fermentations, the efficacy of food preservatives, and the potential of pathogens to cause disease. Individual-based models can help us to understand how these sets of traits of individual microbes influence the above. This eBook compiles all publications from a recent Research Topic in Frontiers in Microbiology. It features recent research where individual observational and/or modelling techniques are applied to gain unique insights into the ecology of microorganisms. The Research Topic “The Individual Microbe: Single-Cell Analysis and Agent-Based Modelling” arose from the 2016 @ASM conference of the same name hosted by the American Society for Microbiology at its headquarters in Washington, D.C. We are grateful to ASM for funding and hosting this conference.
Download or read book Programming for Computations MATLAB Octave written by Svein Linge and published by Springer. This book was released on 2016-08-01 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents computer programming as a key method for solving mathematical problems. There are two versions of the book, one for MATLAB and one for Python. The book was inspired by the Springer book TCSE 6: A Primer on Scientific Programming with Python (by Langtangen), but the style is more accessible and concise, in keeping with the needs of engineering students. The book outlines the shortest possible path from no previous experience with programming to a set of skills that allows the students to write simple programs for solving common mathematical problems with numerical methods in engineering and science courses. The emphasis is on generic algorithms, clean design of programs, use of functions, and automatic tests for verification.
Download or read book Cybernetics and Algorithms in Intelligent Systems written by Radek Silhavy and published by Springer. This book was released on 2018-05-16 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new approaches and methods applied to real-world problems, and in particular, exploratory research relating to novel approaches in the field of cybernetics and automation control theory. Particularly focusing on modern trends in selected fields of interest, it presents new algorithms and methods in intelligent systems in cybernetics. This book constitutes the third volume of the refereed proceedings of the Cybernetics and Algorithms in Intelligent Systems Section of the 7th Computer Science On-line Conference 2018 (CSOC 2018), held online in April 2018.
Download or read book Python for Scientists written by John M. Stewart and published by Cambridge University Press. This book was released on 2017-07-20 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific Python is taught from scratch in this book via copious, downloadable, useful and adaptable code snippets. Everything the working scientist needs to know is covered, quickly providing researchers and research students with the skills to start using Python effectively.
Download or read book Matlab Modelling Programming and Simulations written by Emilson Pereira Leite and published by A B M Nasiruzzaman. This book was released on 2010 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Programming for Computations Python written by Svein Linge and published by Springer. This book was released on 2016-07-25 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents computer programming as a key method for solving mathematical problems. There are two versions of the book, one for MATLAB and one for Python. The book was inspired by the Springer book TCSE 6: A Primer on Scientific Programming with Python (by Langtangen), but the style is more accessible and concise, in keeping with the needs of engineering students. The book outlines the shortest possible path from no previous experience with programming to a set of skills that allows the students to write simple programs for solving common mathematical problems with numerical methods in engineering and science courses. The emphasis is on generic algorithms, clean design of programs, use of functions, and automatic tests for verification.
Download or read book Chemical Reactor Omnibook soft cover written by Octave Levenspiel and published by Lulu.com. This book was released on 2013 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Omnibook aims to present the main ideas of reactor design in a simple and direct way. it includes key formulas, brief explanations, practice exercises, problems from experience and it skims over the field touching on all sorts of reaction systems. Most important of all it tries to show the reader how to approach the problems of reactor design and what questions to ask. In effect it tries to show that a common strategy threads its way through all reactor problems, a strategy which involves three factors: identifying the flow patter, knowing the kinetics, and developing the proper performance equation. It is this common strategy which is the heart of Chemical Reaction Engineering and identifies it as a distinct field of study.
Download or read book An Introduction to Scientific Computing written by Ionut Danaila and published by Springer Science & Business Media. This book was released on 2007-12-03 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book demonstrates scientific computing by presenting twelve computational projects in several disciplines including Fluid Mechanics, Thermal Science, Computer Aided Design, Signal Processing and more. Each follows typical steps of scientific computing, from physical and mathematical description, to numerical formulation and programming and critical discussion of results. The text teaches practical methods not usually available in basic textbooks: numerical checking of accuracy, choice of boundary conditions, effective solving of linear systems, comparison to exact solutions and more. The final section of each project contains the solutions to proposed exercises and guides the reader in using the MATLAB scripts available online.
Download or read book Engineering Mathematics with Examples and Applications written by Xin-She Yang and published by Academic Press. This book was released on 2016-12-29 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Mathematics with Examples and Applications provides a compact and concise primer in the field, starting with the foundations, and then gradually developing to the advanced level of mathematics that is necessary for all engineering disciplines. Therefore, this book's aim is to help undergraduates rapidly develop the fundamental knowledge of engineering mathematics. The book can also be used by graduates to review and refresh their mathematical skills. Step-by-step worked examples will help the students gain more insights and build sufficient confidence in engineering mathematics and problem-solving. The main approach and style of this book is informal, theorem-free, and practical. By using an informal and theorem-free approach, all fundamental mathematics topics required for engineering are covered, and readers can gain such basic knowledge of all important topics without worrying about rigorous (often boring) proofs. Certain rigorous proof and derivatives are presented in an informal way by direct, straightforward mathematical operations and calculations, giving students the same level of fundamental knowledge without any tedious steps. In addition, this practical approach provides over 100 worked examples so that students can see how each step of mathematical problems can be derived without any gap or jump in steps. Thus, readers can build their understanding and mathematical confidence gradually and in a step-by-step manner. - Covers fundamental engineering topics that are presented at the right level, without worry of rigorous proofs - Includes step-by-step worked examples (of which 100+ feature in the work) - Provides an emphasis on numerical methods, such as root-finding algorithms, numerical integration, and numerical methods of differential equations - Balances theory and practice to aid in practical problem-solving in various contexts and applications
Download or read book Introduction to GNU Octave written by Jason Lachniet and published by Lulu.com. This book was released on 2018-11-21 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: A brief introduction to scientific computing with GNU Octave. Designed as a textbook supplement for freshman and sophomore level linear algebra and calculus students.
Download or read book SCILAB A Free Software To MATLAB written by Achuthsankar S Nair and published by S. Chand Publishing. This book was released on 2012 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductio To Scilab | The Scilab Environment | Scalars & Vectors | Matrices | Programming In Scilab | Polynomials | Menus And Dialog Boxes | Graphic Output | String Handling Functions | Statitics | Image Processing Using | Scicos Tool Box Functions | Scicos Visual Editor
