Download or read book Simulation of Mechanical Deformation and Tribology of Nano thin Amorphous Hydrogenated Carbon a written by and published by . This book was released on 1996 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molecular dynamics computer simulations are used to study the effect of substrate temperature on microstructure of deposited amorphous hydrogenated carbon (a:CH) films. A transition from dense diamond- like films to porous graphite-like films is observed between substrate temperatures of 400 and 600 K for a deposition energy of 20 eV. The dense a:CH film grown at 300 K and 20 eV has a hardness ((approximately)50 GPa) about half that of a pure carbon (a:C) film grown under the same conditions.
Download or read book Molecular Dynamics Simulation of Mechanical Deformation of Ultra thin Amorphous Carbon Films written by and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thin Films Stresses and Mechanical Properties VI written by William W. Gerberich and published by . This book was released on 1997 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in the mechanical properties of thin films remains high throughout the world, as evidenced by the large international contingent represented in this book. With regard to stresses, techniques for sorting out residual stress and strain states are becoming more varied and sophisticated. Discussions include Raman scattering, nonlinear acoustic responses and back-scattered electron imaging microscopies, as well as the more standard wafer-bending and X-ray techniques. Spectroscopy, indenting and the burgeoning field of nanoprobe imaging for the characterization of mechanical properties of thin films are also highlighted. Topics include: mechanical properties of films and multilayers; fracture and adhesion; nanoindentation of films and surfaces; mechanical property methods and modelling; tribological properties of thin films; properties of polymer films; stress effects in thin films and interconnects; epitaxy and strain relief mechanisms, measurements.
Download or read book Thin Films Stresses and Mechanical Properties VI written by Shefford P. Baker and published by Materials Research Society. This book was released on 1996-02-11 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in the mechanical properties of thin films remains high throughout the world, as evidenced by the large international contingent represented in this book. With regard to stresses, techniques for sorting out residual stress and strain states are becoming more varied and sophisticated. Discussions include Raman scattering, nonlinear acoustic responses and back-scattered electron imaging microscopies, as well as the more standard wafer-bending and X-ray techniques. Spectroscopy, indenting and the burgeoning field of nanoprobe imaging for the characterization of mechanical properties of thin films are also highlighted. Topics include: mechanical properties of films and multilayers; fracture and adhesion; nanoindentation of films and surfaces; mechanical property methods and modelling; tribological properties of thin films; properties of polymer films; stress effects in thin films and interconnects; epitaxy and strain relief mechanisms, measurements.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tribology of Diamond like Carbon Films written by Christophe Donnet and published by Springer Science & Business Media. This book was released on 2007-12-06 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights some of the most important structural, chemical, mechanical and tribological characteristics of DLC films. It is particularly dedicated to the fundamental tribological issues that impact the performance and durability of these coatings. The book provides reliable and up-to-date information on available industrial DLC coatings and includes clear definitions and descriptions of various DLC films and their properties.
Download or read book Carbon Nanomaterials Modeling Design and Applications written by Kun Zhou and published by CRC Press. This book was released on 2019-07-17 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanomaterials: Modeling, Design, and Applications provides an in-depth review and analysis of the most popular carbon nanomaterials, including fullerenes, carbon nanotubes, graphene and novel carbon nanomaterial-based membranes and thin films, with emphasis on their modeling, design and applications. This book provides basic knowledge of the structures, properties and applications of carbon-based nanomaterials. It illustrates the fundamental structure-property relationships of the materials in both experimental and modeling aspects, offers technical guidance in computational simulation of nanomaterials, and delivers an extensive view on current achievements in research and practice, while presenting new possibilities in the design and usage of carbon nanomaterials. This book is aimed at both undergraduate and graduate students, researchers, designers, professors, and professionals within the fields of materials science and engineering, mechanical engineering, applied physics, and chemical engineering.
Download or read book Surface Characterization of Amorphous Hydrogenated Carbon Thin Films Containing Nanoclusters of Noble Metals written by Ivan Raja Videnović and published by . This book was released on 2003 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tribology of Graphene written by Oleksiy Penkov and published by Elsevier. This book was released on 2020-01-08 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology of Graphene: Simulation Methods, Preparation Methods, and Their Applications provides an exhaustive reference guide on the tribology of graphene-based materials. The book begins with a discussion on the selection of the proper graphene-based material and then segues into how to choose a deposition method, how to control of its structure and properties, and the most effective working conditions and applications. The latest developments in theoretical simulations of graphene friction, preparation methods, and effective applications are all reviewed, as are the ways various graphene coatings can be successfully employed to decrease friction and wear in nano-, micro- and macro-mechanical applications. Synthesizes the broad current research in tribological applications of graphene all in one place Covers theoretical simulations and preparation methods, including insights on how to put them into practice, allowing for quicker and more effective selection of graphene-based material Provides a broader perspective by discussing both graphene-based composites and additives
Download or read book Applied Nanoindentation in Advanced Materials written by Atul Tiwari and published by John Wiley & Sons. This book was released on 2017-10-30 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research in the area of nanoindentation has gained significant momentum in recent years, but there are very few books currently available which can educate researchers on the application aspects of this technique in various areas of materials science. Applied Nanoindentation in Advanced Materials addresses this need and is a comprehensive, self-contained reference covering applied aspects of nanoindentation in advanced materials. With contributions from leading researchers in the field, this book is divided into three parts. Part one covers innovations and analysis, and parts two and three examine the application and evaluation of soft and ceramic-like materials respectively. Key features: A one stop solution for scholars and researchers to learn applied aspects of nanoindentation Contains contributions from leading researchers in the field Includes the analysis of key properties that can be studied using the nanoindentation technique Covers recent innovations Includes worked examples Applied Nanoindentation in Advanced Materials is an ideal reference for researchers and practitioners working in the areas of nanotechnology and nanomechanics, and is also a useful source of information for graduate students in mechanical and materials engineering, and chemistry. This book also contains a wealth of information for scientists and engineers interested in mathematical modelling and simulations related to nanoindentation testing and analysis.
Download or read book Theoretical Experimental and Numerical Contributions to the Mechanics of Fluids and Solids written by Paul Mansour Naghdi and published by Springer Science & Business Media. This book was released on 1995-07-27 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: ZAMP special issue, Vol. 46 This is a comprehensive and up-to-date collection of papers on the mechanics of fluids and solids by leading researchers. It encompasses theoretical, experimental and numerical work on a variety of topics, including nonlinear elasticity, plastici- ty, dynamics, water waves, and turbulence. The collection is published in celebration of Professor Paul M. Naghdi's lifelong contributions to the field of mechanics. It will be of interest to graduate students and researchers in all branches of continuum mechanics.
Download or read book Surface Modification Technologies written by and published by . This book was released on 1995 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scanning Probe Microscopy in Industrial Applications written by Dalia G. Yablon and published by John Wiley & Sons. This book was released on 2013-10-24 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes new state-of-the-science tools and their contribution to industrial R&D With contributions from leading international experts in the field, this book explains how scanning probe microscopy is used in industry, resulting in improved product formulation, enhanced processes, better quality control and assurance, and new business opportunities. Readers will learn about the use of scanning probe microscopy to support R&D efforts in the semiconductor, chemical, personal care product, biomaterial, pharmaceutical, and food science industries, among others. Scanning Probe Microscopy in Industrial Applications emphasizes nanomechanical characterization using scanning probe microscopy. The first half of the book is dedicated to a general overview of nanomechanical characterization methods, offering a complete practical tutorial for readers who are new to the topic. Several chapters include worked examples of useful calculations such as using Hertz mechanics with and without adhesion to model a contact, step-by-step instructions for simulations to guide cantilever selection for an experiment, and data analysis procedures for dynamic contact experiments. The second half of the book describes applications of nanomechanical characterization in industry, including: New formulation development for pharmaceuticals Measurement of critical dimensions and thin dielectric films in the semiconductor industry Effect of humidity and temperature on biomaterials Characterization of polymer blends to guide product formulation in the chemicals sector Unraveling links between food structure and function in the food industry Contributions are based on the authors' thorough review of the current literature as well as their own firsthand experience applying scanning probe microscopy to solve industrial R&D problems. By explaining the fundamentals before advancing to applications, Scanning Probe Microscopy in Industrial Applications offers a complete treatise that is accessible to both novices and professionals. All readers will discover how to apply scanning probe microscopy to build and enhance their R&D efforts.
Download or read book Proceedings of the 30th International Conference on Metallurgical Coatings and Thin Films written by Allan Matthews and published by . This book was released on 2004 with total page 902 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tribology on the Small Scale written by C. Mathew Mate and published by Oxford Graduate Texts. This book was released on 2019 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction, lubrication, adhesion, and wear are prevalent physical phenomena in everyday life and in many key technologies. This book explains how these tribological phenomena originate from atomistic and microscale physical phenomena and shows how this understanding can be used to solve macroscale tribology problems.
Download or read book Ceramic Abstracts written by American Ceramic Society and published by . This book was released on 1995 with total page 1150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Superlubricity written by Ali Erdemir and published by Elsevier. This book was released on 2007-03-30 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superlubricity is defined as a sliding regime in which friction or resistance to sliding vanishes. It has been shown that energy can be conserved by further reducing/removing friction in moving mechanical systems and this book includes contributions from world-renowned scientists who address some of the most fundamental research issues in overcoming friction. Superlubricity reviews the latest methods and materials in this area of research that are aimed at removing friction in nano-to-micro scale machines and large scale engineering components. Insight is also given into the atomic-scale origins of friction in general and superlubricity while other chapters focus on experimental and practical aspects or impacts of superlubricity that will be very useful for broader industrial community. * Reviews the latest fundamental research in superlubricity today* Presents 'state-of-the-art' methods, materials, and experimental techniques* Latest developments in tribomaterials, coatings, and lubricants providing superlubricity
