Download or read book Simulation of Flow Around Cylinder Actuated by DBD Plasma written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: The electric-static body force model is obtained by solving Maxwell's electromagnetic equations. Based on the electro-static model, numerical modeling of flow around a cylinder with a dielectric barrier discharge (DBD) plasma effect is also presented. The flow streamlines between the numerical simulation and the particle image velocimetry (PIV) experiment are consistent. According to the numerical simulation, DBD plasma can reduce the drag coefficient and change the vortex shedding frequencies of flow around the cylinder.
Download or read book Flow Control Over a Tandem Cylinder Using Plasma Actuation written by Benjamin Latrobe and published by . This book was released on 2021 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tandem cylinder flow control in the form of dielectric barrier discharge, DBD, plasma actuation on the upstream cylinder is used to control the wake and flow around the downstream cylinder. Twin spanwise-oriented plasma actuators are mounted at ± 80 degrees from the forward stagnation point of the upstream cylinder. The actuators are powered with two different AC voltage levels, low-power forcing and high-power forcing. Flow control experiments are performed at Reynolds number 4,700, and cylinder spacing range 3 [less than or equal to] L/D [less than or equal to] 5. Results include pressure measurements on the downstream cylinder and wake surveys using Particle Image Velocimetry, PIV. High-power forcing reduces the height between vorticity peaks behind upstream cylinder and, in the case of L = 3D, restricts upstream wake from impinging on downstream cylinder.
Download or read book Flow Control Techniques and Applications written by Jinjun Wang and published by Cambridge University Press. This book was released on 2019 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master the theory, applications and control mechanisms of flow control techniques.
Download or read book Experiment and Computational Analysis on Effect of Plasma Actuation in Incompressible Flow Around Tandem Cylinders written by Emmanuel Gabriel-Ohanu and published by . This book was released on 2019 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of plasma actuation in fluid dynamics to control flow velocity by generating momentum to force atmospheric pressure and velocity in external flow with Single- Dielectric Barrier Discharge(SDBD) for both two and three-dimensional, 2D and 3D actuator (straight and segmented actuator). The SDBD actuators are mounted spanwise on the leading cylinder for both 2D and 3D to impact momentum, therefore, forcing the wake regime. Computational Analysis is utilized for result and data pre-processing. The steady three-dimensional flow of tandem cylinders can be studied through Large Eddy Simulation (LES) using a subgrid-scale model to compare numerical and experimental results for the same setup and physical conditions. Particle Image Velocimetry (PIV) is used to resolve time series images from flow visualization of the experiment, the images are processed to visualize velocity vectors of the flow regimes. The velocity profile of the flow can be averaged and plotted for all instantaneous time-series images processed in PIV by Dynamic Mode Decomposition (DMD) or Proper Orthogonal Decomposition (POD) to generate common eigenvalues and eigenvector of the large dimension PIV data which shows the average properties of the flow properties.
Download or read book Advances in Effective Flow Separation Control for Aircraft Drag Reduction written by Ning Qin and published by Springer Nature. This book was released on 2019-10-17 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the results of a European-Chinese collaborative research project, Manipulation of Reynolds Stress for Separation Control and Drag Reduction (MARS), including an analysis and discussion of the effects of a number of active flow control devices on the discrete dynamic components of the turbulent shear layers and Reynolds stress. From an application point of view, it provides a positive and necessary step to control individual structures that are larger in scale and lower in frequency compared to the richness of the temporal and spatial scales in turbulent separated flows.
Download or read book Flow Around Circular Cylinders written by M.M. Zdravkovich and published by Oxford University Press. This book was released on 1997 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text offers an authoritative compilation of experimental data, theoretical models, and computer simulations which will provide the reader with a comprehensive survey of research work on the phenomenon of flow around circular cylinders.
Download or read book Progress in Hybrid RANS LES Modelling written by Song Fu and published by Springer Science & Business Media. This book was released on 2012-08-14 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book contains contributions presented at the Fourth Symposium on Hybrid RANS-LES Methods, held in Beijing, China, 28-30 September 2011, being a continuation of symposia taking place in Stockholm (Sweden, 2005), in Corfu (Greece, 2007), and Gdansk (Poland, 2009). The contributions to the last two symposia were published as NNFM, Vol. 97 and Vol. 111. At the Beijing symposium, along with seven invited keynotes, another 46 papers (plus 5 posters) were presented addressing topics on Novel turbulence-resolving simulation and modelling, Improved hybrid RANS-LES methods, Comparative studies of difference modelling methods, Modelling-related numerical issues and Industrial applications.. The present book reflects recent activities and new progress made in the development and applications of hybrid RANS-LES methods in general.
Download or read book Low Reynolds Number written by Mustafa Serdar Genç and published by BoD – Books on Demand. This book was released on 2012-04-04 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports the latest development and trends in the low Re number aerodynamics, transition from laminar to turbulence, unsteady low Reynolds number flows, experimental studies, numerical transition modelling, control of low Re number flows, and MAV wing aerodynamics. The contributors to each chapter are fluid mechanics and aerodynamics scientists and engineers with strong expertise in their respective fields. As a whole, the studies presented here reveal important new directions toward the realization of applications of MAV and wind turbine blades.
Download or read book Sustainable Aviation written by T. Hikmet Karakoc and published by Springer. This book was released on 2016-07-20 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This expansive reference on the use of clean energy technologies in the aviation industry focuses on tools and solutions for maximizing the energy efficiency of aircrafts, airports, and other auxiliary components of air transit. Key topics range from predicting impacts of avionics and control systems to energy/exergy performance analyses of flight mechanics and computational fluid dynamics. The book includes findings both from experimental investigations and functional extant systems, ranging from propulsion technologies for aerospace vehicles to airport design to energy recovery systems. Engineers, researchers and students will benefit from the broad reach and numerous engineering examples provided.
Download or read book Actuators written by Constantin Volosencu and published by BoD – Books on Demand. This book was released on 2018-07-11 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book promotes new research results in the field of modern actuators and their applications. New coverage of dielectric barrier discharge plasma actuators, polymeric microgripper based on the cascaded V-shaped electrothermal actuators, ionic polymer actuators, wideband actuators and energy harvesters, electromagnetic actuators and shape memory alloy actuators are comprehended. The book is structured in four sections: design, fabrication and simulation; control systems; medical applications and fault detection. Seven chapters are published following a rigorous selection process. In the first section, a study carried out to investigate experimentally and by numerical simulations a microscale plasma actuator; the design, fabrication, numerical simulations, and experimental investigations of a polymeric microgripper designed using the cascaded V-shaped electrothermal actuators; a review of the development of ionic polymer actuator with introduction of two kinds of typical polymer actuators - ionic polymer-metal composites and bucky gel actuator - with their basic principle and fabrication process and typical applications and a methodology of designing and testing wideband actuators and energy harvesters, treated as one mechanical resonator, with a discussion on shock harvester, resonant harvester and energy transmission system, are presented. The second section has a chapter dedicated to modeling, system identification and control of electromagnetic actuators with main focus on the actuators used in magnetic levitation, in fuel injection systems and in variable valve timing. The third section presents a study focused on quantifying the decline in tactile sensation associated with diabetic neuropathy and developed a measurement device that used a thin-shaped memory alloy wire as the actuator. The fourth section includes a chapter presenting a two-level fault diagnosis and root-cause analysis scheme for a class of interconnected invertible dynamic systems, which aims at detecting and identifying actuator fault and causes.
Download or read book Encyclopedia of Plasma Technology Two Volume Set written by J. Leon Shohet and published by CRC Press. This book was released on 2016-12-12 with total page 3082 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical plasmas have a wide range of industrial applications. The Encyclopedia of Plasma Technology covers all aspects of plasma technology from the fundamentals to a range of applications across a large number of industries and disciplines. Topics covered include nanotechnology, solar cell technology, biomedical and clinical applications, electronic materials, sustainability, and clean technologies. The book bridges materials science, industrial chemistry, physics, and engineering, making it a must have for researchers in industry and academia, as well as those working on application-oriented plasma technologies. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]
Download or read book Shock Wave Boundary Layer Interactions written by Holger Babinsky and published by Cambridge University Press. This book was released on 2011-09-12 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shock wave-boundary-layer interaction (SBLI) is a fundamental phenomenon in gas dynamics that is observed in many practical situations, ranging from transonic aircraft wings to hypersonic vehicles and engines. SBLIs have the potential to pose serious problems in a flowfield; hence they often prove to be a critical - or even design limiting - issue for many aerospace applications. This is the first book devoted solely to a comprehensive, state-of-the-art explanation of this phenomenon. It includes a description of the basic fluid mechanics of SBLIs plus contributions from leading international experts who share their insight into their physics and the impact they have in practical flow situations. This book is for practitioners and graduate students in aerodynamics who wish to familiarize themselves with all aspects of SBLI flows. It is a valuable resource for specialists because it compiles experimental, computational and theoretical knowledge in one place.
Download or read book Computational Electromagnetic Aerodynamics written by Joseph J. S. Shang and published by John Wiley & Sons. This book was released on 2016-04-11 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents numerical algorithms, procedures, and techniques required to solve engineering problems relating to the interactions between electromagnetic fields and fluid flow and interdisciplinary technology for aerodynamics, electromagnetics, chemical-physic kinetics, and plasmadynamics Integrates interlinking computational model and simulation techniques of aerodynamics and electromagnetics Combines classic plasma drift-diffusion theory and electron impact ionization modeling for electromagnetic-aerodynamic interactions Describes models of internal degrees of freedom for vibration relaxation and electron excitations
Download or read book Experimentation Validation and Uncertainty Analysis for Engineers written by Hugh W. Coleman and published by John Wiley & Sons. This book was released on 2018-04-09 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Helps engineers and scientists assess and manage uncertainty at all stages of experimentation and validation of simulations Fully updated from its previous edition, Experimentation, Validation, and Uncertainty Analysis for Engineers, Fourth Edition includes expanded coverage and new examples of applying the Monte Carlo Method (MCM) in performing uncertainty analyses. Presenting the current, internationally accepted methodology from ISO, ANSI, and ASME standards for propagating uncertainties using both the MCM and the Taylor Series Method (TSM), it provides a logical approach to experimentation and validation through the application of uncertainty analysis in the planning, design, construction, debugging, execution, data analysis, and reporting phases of experimental and validation programs. It also illustrates how to use a spreadsheet approach to apply the MCM and the TSM, based on the authors’ experience in applying uncertainty analysis in complex, large-scale testing of real engineering systems. Experimentation, Validation, and Uncertainty Analysis for Engineers, Fourth Edition includes examples throughout, contains end of chapter problems, and is accompanied by the authors’ website www.uncertainty-analysis.com. Guides readers through all aspects of experimentation, validation, and uncertainty analysis Emphasizes the use of the Monte Carlo Method in performing uncertainty analysis Includes complete new examples throughout Features workable problems at the end of chapters Experimentation, Validation, and Uncertainty Analysis for Engineers, Fourth Edition is an ideal text and guide for researchers, engineers, and graduate and senior undergraduate students in engineering and science disciplines. Knowledge of the material in this Fourth Edition is a must for those involved in executing or managing experimental programs or validating models and simulations.
Download or read book Numerical Simulation of the Flow Around Rows of Cylinder written by and published by . This book was released on 2007 with total page 61 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flow Control written by Thomas C. Corke and published by Cambridge University Press. This book was released on 2024-04-11 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive treatment of passive and active flow control in fluid dynamics, with an emphasis on utilizing fluid instabilities for enhancing control performance. Examples are given from a wide range of technologically important flow fields occurring in aerospace applications, from low-subsonic to hypersonic Mach numbers. This essential book can be used for both research and teaching on the topics of fluid instabilities, fluid measurement and flow actuator techniques, and problem sets are provided at the end of each chapter to reinforce key concepts and further extend readers' understanding of the field. The solutions manual is available as a online resource for instructors. The text is well suited for both graduate students in fluid dynamics and for practising engineers in the aerodynamics design field.
Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.
