Download or read book Flight Dynamics Simulation and Control written by Ranjan Vepa and published by CRC Press. This book was released on 2023-04-11 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flight Dynamics, Simulation, and Control of Aircraft: For Rigid and Flexible Aircraft explains the basics of non-linear aircraft dynamics and the principles of control-configured aircraft design, as applied to rigid and flexible aircraft, drones, and unmanned aerial vehicles (UAVs). Addressing the details of dynamic modeling, simulation, and control in a selection of aircraft, the book explores key concepts associated with control-configured elastic aircraft. It also covers the conventional dynamics of rigid aircraft and examines the use of linear and non-linear model-based techniques and their applications to flight control. This second edition features a new chapter on the dynamics and control principles of drones and UAVs, aiding in the design of newer aircraft with a combination of propulsive and aerodynamic control surfaces. In addition, the book includes new sections, approximately 20 problems per chapter, examples, simulator exercises, and case studies to enhance and reinforce student understanding. The book is intended for senior undergraduate and graduate mechanical and aerospace engineering students taking Flight Dynamics and Flight Control courses. Instructors will be able to utilize an updated Solutions Manual and figure slides for their course.
Download or read book Flight Dynamics written by Robert F. Stengel and published by Princeton University Press. This book was released on 2022-11-01 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: An updated and expanded new edition of an authoritative book on flight dynamics and control system design for all types of current and future fixed-wing aircraft Since it was first published, Flight Dynamics has offered a new approach to the science and mathematics of aircraft flight, unifying principles of aeronautics with contemporary systems analysis. Now updated and expanded, this authoritative book by award-winning aeronautics engineer Robert Stengel presents traditional material in the context of modern computational tools and multivariable methods. Special attention is devoted to models and techniques for analysis, simulation, evaluation of flying qualities, and robust control system design. Using common notation and not assuming a strong background in aeronautics, Flight Dynamics will engage a wide variety of readers, including aircraft designers, flight test engineers, researchers, instructors, and students. It introduces principles, derivations, and equations of flight dynamics as well as methods of flight control design with frequent reference to MATLAB functions and examples. Topics include aerodynamics, propulsion, structures, flying qualities, flight control, and the atmospheric and gravitational environment. The second edition of Flight Dynamics features up-to-date examples; a new chapter on control law design for digital fly-by-wire systems; new material on propulsion, aerodynamics of control surfaces, and aeroelastic control; many more illustrations; and text boxes that introduce general mathematical concepts. Features a fluid, progressive presentation that aids informal and self-directed study Provides a clear, consistent notation that supports understanding, from elementary to complicated concepts Offers a comprehensive blend of aerodynamics, dynamics, and control Presents a unified introduction of control system design, from basics to complex methods Includes links to online MATLAB software written by the author that supports the material covered in the book
Download or read book Introduction to Aircraft Flight Mechanics written by Thomas R. Yechout and published by AIAA. This book was released on 2003 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on a 15-year successful approach to teaching aircraft flight mechanics at the US Air Force Academy, this text explains the concepts and derivations of equations for aircraft flight mechanics. It covers aircraft performance, static stability, aircraft dynamics stability and feedback control.
Download or read book Aircraft Control and Simulation written by Brian L. Stevens and published by John Wiley & Sons. This book was released on 2015-10-02 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get a complete understanding of aircraft control and simulation Aircraft Control and Simulation: Dynamics, Controls Design, and Autonomous Systems, Third Edition is a comprehensive guide to aircraft control and simulation. This updated text covers flight control systems, flight dynamics, aircraft modeling, and flight simulation from both classical design and modern perspectives, as well as two new chapters on the modeling, simulation, and adaptive control of unmanned aerial vehicles. With detailed examples, including relevant MATLAB calculations and FORTRAN codes, this approachable yet detailed reference also provides access to supplementary materials, including chapter problems and an instructor's solution manual. Aircraft control, as a subject area, combines an understanding of aerodynamics with knowledge of the physical systems of an aircraft. The ability to analyze the performance of an aircraft both in the real world and in computer-simulated flight is essential to maintaining proper control and function of the aircraft. Keeping up with the skills necessary to perform this analysis is critical for you to thrive in the aircraft control field. Explore a steadily progressing list of topics, including equations of motion and aerodynamics, classical controls, and more advanced control methods Consider detailed control design examples using computer numerical tools and simulation examples Understand control design methods as they are applied to aircraft nonlinear math models Access updated content about unmanned aircraft (UAVs) Aircraft Control and Simulation: Dynamics, Controls Design, and Autonomous Systems, Third Edition is an essential reference for engineers and designers involved in the development of aircraft and aerospace systems and computer-based flight simulations, as well as upper-level undergraduate and graduate students studying mechanical and aerospace engineering.
Download or read book Flight Dynamics Simulation and Control written by Ranjan Vepa and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the AIAA Modeling and Simulation Technologies Conference written by American Institute of Aeronautics and Astronautics and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 1997 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics for the 1997 conference on modelling and simulation technologies included: motion systems; rotor-craft and air cushion vehicle dynamics and modelling; pilot training and low-cost simulation; weapons and engagement modelling and simulation; simulator network and information technologies; visual, radarf and environmental modelling and simulation; test and evaluation; space systems; simulator fidelity; aircraft dynamics, modelling and performance; simulator development and software re-use; human factors; and research and test facilities.
Download or read book Flight Physics written by Konstantin Volkov and published by BoD – Books on Demand. This book was released on 2018-02-14 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on the synthesis of the fundamental disciplines and practical applications involved in the investigation, description, and analysis of aircraft flight including applied aerodynamics, aircraft propulsion, flight performance, stability, and control. The book covers the aerodynamic models that describe the forces and moments on maneuvering aircraft and provides an overview of the concepts and methods used in flight dynamics. Computational methods are widely used by the practicing aerodynamicist, and the book covers computational fluid dynamics techniques used to improve understanding of the physical models that underlie computational methods.
Download or read book Highly Flexible Structures written by Perngjin Frank Pai and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 2007 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accompanying CD-ROM contains ... "computer programs and digital movies of experiments."--Page 4 of cover.
Download or read book Aerial Robots written by Omar D Lopez Mejia and published by BoD – Books on Demand. This book was released on 2017-09-06 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Few years ago, the topic of aerial robots was exclusively related to the robotics community, so a great number of books about the dynamics and control of aerial robots and UAVs have been written. As the control technology for UAVs advances, the great interaction that exists between other systems and elements that are as important as control such as aerodynamics, energy efficiency, acoustics, structural integrity, and applications, among others has become evident. Aerial Robots - Aerodynamics, Control, and Applications is an attempt to bring some of these topics related to UAVs together in just one book and to look at a selection of the most relevant problems of UAVs in a broader engineering perspective.
Download or read book Performance Evaluation and Design of Flight Vehicle Control Systems written by Eric T. Falangas and published by John Wiley & Sons. This book was released on 2015-12-21 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to assist analysts, engineers, and students toward developing dynamic models, and analyzing the control of flight vehicles with various blended features comprising aircraft, launch vehicles, reentry vehicles, missiles and aircraft. Graphical methods for analysing vehicle performance Methods for trimming deflections of a vehicle that has multiple types of effectors Presents a parameters used for speedily evaluating the performance, stability, and controllability of a new flight vehicle concept along a trajectory or with fixed flight conditions
Download or read book Aviation Safety and Pilot Control written by National Research Council and published by National Academies Press. This book was released on 1997-03-28 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adverse aircraft-pilot coupling (APC) events include a broad set of undesirable and sometimes hazardous phenomena that originate in anomalous interactions between pilots and aircraft. As civil and military aircraft technologies advance, interactions between pilots and aircraft are becoming more complex. Recent accidents and other incidents have been attributed to adverse APC in military aircraft. In addition, APC has been implicated in some civilian incidents. This book evaluates the current state of knowledge about adverse APC and processes that may be used to eliminate it from military and commercial aircraft. It was written for technical, government, and administrative decisionmakers and their technical and administrative support staffs; key technical managers in the aircraft manufacturing and operational industries; stability and control engineers; aircraft flight control system designers; research specialists in flight control, flying qualities, human factors; and technically knowledgeable lay readers.
Download or read book Control of Spacecraft and Aircraft written by Arthur E. Bryson Jr. and published by Princeton University Press. This book was released on 2015-11-03 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here a leading researcher provides a comprehensive treatment of the design of automatic control logic for spacecraft and aircraft. In this book Arthur Bryson describes the linear-quadratic-regulator (LQR) method of feedback control synthesis, which coordinates multiple controls, producing graceful maneuvers comparable to those of an expert pilot. The first half of the work is about attitude control of rigid and flexible spacecraft using momentum wheels, spin, fixed thrusters, and gimbaled engines. Guidance for nearly circular orbits is discussed. The second half is about aircraft attitude and flight path control. This section discusses autopilot designs for cruise, climb-descent, coordinated turns, and automatic landing. One chapter deals with controlling helicopters near hover, and another offers an introduction to the stabilization of aeroelastic instabilities. Throughout the book there is a strong emphasis on the mathematical modeling necessary for designing a good feedback control system. The appendixes summarize analysis of linear dynamic systems, synthesis of analog and digital feedback control, simulation, and modeling of flexible vehicles.
Download or read book Introduction to Aircraft Aeroelasticity and Loads written by Jan Robert Wright and published by John Wiley & Sons. This book was released on 2008-02-28 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aeroelastic phenomena arising from the interaction of aerodynamic, elastic and inertia forces, and the loads resulting from flight / ground manoeuvres and gust / turbulence encounters, have a significant influence upon aircraft design. The prediction of aircraft aeroelastic stability, response and loads requires application of a range of interrelated engineering disciplines. This new textbook introduces the foundations of aeroelasticity and loads for the flexible aircraft, providing an understanding of the main concepts involved and relating them to aircraft behaviour and industrial practice. This book includes the use of simplified mathematical models to demonstrate key aeroelastic and loads phenomena including flutter, divergence, control effectiveness and the response and loads resulting from flight / ground manoeuvres and gust / turbulence encounters. It provides an introduction to some up-to-date methodologies for aeroelastics and loads modelling. It lays emphasis on the strong link between aeroelasticity and loads. It also includes provision of MATLAB and SIMULINK programs for the simplified analyses. It offers an overview of typical industrial practice in meeting certification requirements.
Download or read book The DelFly written by G.C.H.E. de Croon and published by Springer. This book was released on 2015-11-26 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the topics most relevant to autonomously flying flapping wing robots: flapping-wing design, aerodynamics, and artificial intelligence. Readers can explore these topics in the context of the "Delfly", a flapping wing robot designed at Delft University in The Netherlands. How are tiny fruit flies able to lift their weight, avoid obstacles and predators, and find food or shelter? The first step in emulating this is the creation of a micro flapping wing robot that flies by itself. The challenges are considerable: the design and aerodynamics of flapping wings are still active areas of scientific research, whilst artificial intelligence is subject to extreme limitations deriving from the few sensors and minimal processing onboard. This book conveys the essential insights that lie behind success such as the DelFly Micro and the DelFly Explorer. The DelFly Micro, with its 3.07 grams and 10 cm wing span, is still the smallest flapping wing MAV in the world carrying a camera, whilst the DelFly Explorer is the world's first flapping wing MAV that is able to fly completely autonomously in unknown environments. The DelFly project started in 2005 and ever since has served as inspiration, not only to many scientific flapping wing studies, but also the design of flapping wing toys. The combination of introductions to relevant fields, practical insights and scientific experiments from the DelFly project make this book a must-read for all flapping wing enthusiasts, be they students, researchers, or engineers.
Download or read book Modeling Flexible Aircraft for Flight Control Design written by E. C. Bekir and published by . This book was released on 1989 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Trends to lower structural fraction of aircraft increase flexibility effects. Higher bandwidth control systems combined with these more flexible structures cause more aeroservoelastic interactions. Active, closed-loop control systems allow greater flexibility. To take advantage of this design possibility, an integrated ASE model is needed for conceptual and preliminary design stages of aircraft. This report seeks to define the equations of motion of a flexible aircraft from first principles to aid future discussions between experts in the specialties which make up ASE: aerodynamics, controls, and structures. This theoretical report documents the development of the equations, and states under what conditions the assumptions and approximations are accurate. It consists of 5 sections on different technical areas and a summary section: 1) Linearization of flexible aircraft hybrid-coordinate dynamic equations and inclusion of aerodynamic and gravitational loads; 2) Derivation of equations of motion and stability derivatives for a flexible aircraft vehicle; 3) Aerodynamics for aeroservoelasticity; 4) Model-order reduction for linear systems; and 5) Hydraulic actuator equations for aeroservoelastic modeling. Flight control systems; Servomechanisms. (edc).
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 1460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Introduction to Nonlinear Aeroelasticity written by Grigorios Dimitriadis and published by John Wiley & Sons. This book was released on 2017-03-10 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Nonlinear Aeroelasticity Introduces the latest developments and technologies in the area of nonlinear aeroelasticity Nonlinear aeroelasticity has become an increasingly popular research area in recent years. There have been many driving forces behind this development, increasingly flexible structures, nonlinear control laws, materials with nonlinear characteristics and so on. Introduction to Nonlinear Aeroelasticity covers the theoretical basics in nonlinear aeroelasticity and applies the theory to practical problems. As nonlinear aeroelasticity is a combined topic, necessitating expertise from different areas, the book introduces methodologies from a variety of disciplines such as nonlinear dynamics, bifurcation analysis, unsteady aerodynamics, non-smooth systems and others. The emphasis throughout is on the practical application of the theories and methods, so as to enable the reader to apply their newly acquired knowledge Key features: Covers the major topics in nonlinear aeroelasticity, from the galloping of cables to supersonic panel flutter Discusses nonlinear dynamics, bifurcation analysis, numerical continuation, unsteady aerodynamics and non-smooth systems Considers the practical application of the theories and methods Covers nonlinear dynamics, bifurcation analysis and numerical methods Accompanied by a website hosting Matlab code Introduction to Nonlinear Aeroelasticity is a comprehensive reference for researchers and workers in industry and is also a useful introduction to the subject for graduate and undergraduate students across engineering disciplines.
