EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Simulation Models for the Nonlinear Seismic Evaluation of the I 880 Viaduct

Download or read book Simulation Models for the Nonlinear Seismic Evaluation of the I 880 Viaduct written by Keith Thomas Bauer and published by . This book was released on 2003 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Inelastic Modelling and Seismic Evaluation of a Highway Bridge Structure

Download or read book Inelastic Modelling and Seismic Evaluation of a Highway Bridge Structure written by Anna Marie Von Felten and published by . This book was released on 2003 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Seismic Demand Analyses and Probabilistic Performance based Assessment of the I 880 Viaduct

Download or read book Seismic Demand Analyses and Probabilistic Performance based Assessment of the I 880 Viaduct written by Leah Ilene Larson and published by . This book was released on 2004 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Earthquake Geotechnical Engineering Design

Download or read book Earthquake Geotechnical Engineering Design written by Michele Maugeri and published by Springer Science & Business Media. This book was released on 2014-02-03 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pseudo-static analysis is still the most-used method to assess the stability of geotechnical systems that are exposed to earthquake forces. However, this method does not provide any information about the deformations and permanent displacements induced by seismic activity. Moreover, it is questionable to use this approach when geotechnical systems are affected by frequent and rare seismic events. Incidentally, the peak ground acceleration has increased from 0.2-0.3 g in the seventies to the current value of 0.6-0.8 g. Therefore, a shift from the pseudo-static approach to performance-based analysis is needed. Over the past five years considerable progress has been made in Earthquake Geotechnical Engineering Design (EGED). The most recent advances are presented in this book in 6 parts. The evaluation of the site amplification is covered in Part I of the book. In Part II the evaluation of the soil foundation stability against natural slope failure and liquefaction is treated. In the following 3 Parts of the book the EGED for different geotechnical systems is presented as follows: the design of levees and dams including natural slopes in Part III; the design of foundations and soil structure interaction analysis in Part IV; underground structures in Part V. Finally in Part VI, new topics like the design of reinforced earth retaining walls and landfills are covered.

Book Nonlinear Modeling of Texas Highway Bridges for Seismic Response history Analysis

Download or read book Nonlinear Modeling of Texas Highway Bridges for Seismic Response history Analysis written by Vyacheslav Oleksiyovich Prakhov and published by . This book was released on 2016 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: A recent increase in the number of earthquakes across the state of Texas has raised concerns about seismic performance of highway bridges in the state inventory, the vast majority of which were not explicitly designed to withstand earthquake loading. Potential causes of seismic damage include column shear failure due to low transverse reinforcement rations and non-seismic detailing, girder unseating due to excessive bearing deformation or instability, deck pounding, and others. The objective of the study is to develop bridge numerical models for nonlinear response-history analysis taking into consideration Texas-specific design and detailing practices. Using the models developed, the fragility of Texas bridges can be analyzed and systematically quantified, allowing state highway officials to efficiently identify the bridges most likely to be damaged after an earthquake. Component models for all major bridge parts were developed for this study, including the superstructure, deck joint, bearing, bent, foundation, and abutment. The models were developed based on past experimental, analytical, and numerical work from the literature, accounting for the mass, stiffness, and damping properties of each bridge component. Damage was accounted for using nonlinear hinge models capable of simulating stiffness-degradation and hysteretic behavior based on specific properties and expected limit states of each bridge component. Finally, a MATLAB script was developed to assemble bridge component models into full bridge models depending on user input of geometric and material properties of an individual bridge sample.

Book Nonlinear Modeling  Analysis and Simulation for Earthquake Engineering

Download or read book Nonlinear Modeling Analysis and Simulation for Earthquake Engineering written by and published by . This book was released on 2009 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Innovative Bridge Design Handbook

Download or read book Innovative Bridge Design Handbook written by Alessio Pipinato and published by Elsevier. This book was released on 2021-09-08 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovative Bridge Design Handbook: Construction, Rehabilitation, and Maintenance, Second Edition, brings together the essentials of bridge engineering across design, assessment, research and construction. Written by an international group of experts, each chapter is divided into two parts: the first covers design issues, while the second presents current research into the innovative design approaches used across the world. This new edition includes new topics such as foot bridges, new materials in bridge engineering and soil-foundation structure interaction. All chapters have been updated to include the latest concepts in design, construction, and maintenance to reduce project cost, increase structural safety, and maximize durability. Code and standard references have been updated. Completely revised and updated with the latest in bridge engineering and design Provides detailed design procedures for specific bridges with solved examples Presents structural analysis including numerical methods (FEM), dynamics, risk and reliability, and innovative structural typologies

Book The Integration of Experimental and Simulation Data in the Study of Reinforced Concrete Bridge Systems Including Soil foundation structure Interaction

Download or read book The Integration of Experimental and Simulation Data in the Study of Reinforced Concrete Bridge Systems Including Soil foundation structure Interaction written by Glenn Matthew Dryden and published by . This book was released on 2009 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Soil Dynamics and Earthquake Geotechnical Engineering

Download or read book Soil Dynamics and Earthquake Geotechnical Engineering written by Boominathan Adimoolam and published by Springer. This book was released on 2018-06-09 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected proceedings of the annual conference of the Indian Geotechnical Society, and covers various aspects of soil dynamics and earthquake geotechnical engineering. The book includes a wide range of studies on seismic response of dams, foundation-soil systems, natural and man-made slopes, reinforced-earth walls, base isolation systems and so on, especially focusing on the soil dynamics and case studies from the Indian subcontinent. The book also includes chapters addressing related issues such as landslide risk assessments, liquefaction mitigation, dynamic analysis of mechanized tunneling, and advanced seismic soil-structure-interaction analysis. Given its breadth of coverage, the book offers a useful guide for researchers and practicing civil engineers alike.

Book Post earthquake Traffic Capacity of Modern Bridges in California

Download or read book Post earthquake Traffic Capacity of Modern Bridges in California written by Vesna Terzic and published by . This book was released on 2010 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The test results were then used to calibrate a finite element model of a bridge column. This bridge column model was incorporated into a hybrid model of a typical California overpass bridge and tested using the hybrid simulation technique. The finite element model of the typical California overpass bridge was validated using the data from hybrid simulations. The validated model of the typical bridge was used to evaluate its post-earthquake truck load capacity in an extensive parametric study that examined the effects of different ground motions and bridge modeling parameters such as the boundary conditions imposed by the bridge abutments, the location of the truck on the bridge, and the amount of bridge column residual drift. The principal outcomes of this study are the following findings.

Book Single Piles in Liquefiable Ground

Download or read book Single Piles in Liquefiable Ground written by Rui Wang and published by Springer. This book was released on 2016-03-17 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis focuses on the seismic response of piles in liquefiable ground. It describes the design of a three-dimensional, unified plasticity model for large post-liquefaction shear deformation of sand, formulated and implemented for parallel computing. It also presents a three-dimensional, dynamic finite element analysis method for piles in liquefiable ground, developed on the basis of this model,. Employing a combination of case analysis, centrifuge shaking table experiments and numerical simulations using the proposed methods, it demonstrates the seismic response patterns of single piles in liquefiable ground. These include basic force-resistance mode, kinematic and inertial interaction coupling mechanism and major influence factors. It also discusses a beam on the nonlinear Winkler foundation (BNWF) solution and a modified neutral plane solution developed and validated using centrifuge experiments for piles in consolidating and reconsolidating ground. Lastly, it studies axial pile force and settlement during post-earthquake reconsolidation, showing pile axial force to be irrelevant in the reconsolidation process, while settlement is process dependent.

Book Seismic Design and Retrofit of Bridges

Download or read book Seismic Design and Retrofit of Bridges written by M. J. N. Priestley and published by John Wiley & Sons. This book was released on 1996-04-12 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of their structural simplicity, bridges tend to beparticularly vulnerable to damage and even collapse when subjectedto earthquakes or other forms of seismic activity. Recentearthquakes, such as the ones in Kobe, Japan, and Oakland,California, have led to a heightened awareness of seismic risk andhave revolutionized bridge design and retrofit philosophies. In Seismic Design and Retrofit of Bridges, three of the world's topauthorities on the subject have collaborated to produce the mostexhaustive reference on seismic bridge design currently available.Following a detailed examination of the seismic effects of actualearthquakes on local area bridges, the authors demonstrate designstrategies that will make these and similar structures optimallyresistant to the damaging effects of future seismicdisturbances. Relying heavily on worldwide research associated with recentquakes, Seismic Design and Retrofit of Bridges begins with anin-depth treatment of seismic design philosophy as it applies tobridges. The authors then describe the various geotechnicalconsiderations specific to bridge design, such as soil-structureinteraction and traveling wave effects. Subsequent chapters coverconceptual and actual design of various bridge superstructures, andmodeling and analysis of these structures. As the basis for their design strategies, the authors' focus is onthe widely accepted capacity design approach, in which particularlyvulnerable locations of potentially inelastic flexural deformationare identified and strengthened to accommodate a greater degree ofstress. The text illustrates how accurate application of thecapacity design philosophy to the design of new bridges results instructures that can be expected to survive most earthquakes withonly minor, repairable damage. Because the majority of today's bridges were built before thecapacity design approach was understood, the authors also devoteseveral chapters to the seismic assessment of existing bridges,with the aim of designing and implementing retrofit measures toprotect them against the damaging effects of future earthquakes.These retrofitting techniques, though not considered appropriate inthe design of new bridges, are given considerable emphasis, sincethey currently offer the best solution for the preservation ofthese vital and often historically valued thoroughfares. Practical and applications-oriented, Seismic Design and Retrofit ofBridges is enhanced with over 300 photos and line drawings toillustrate key concepts and detailed design procedures. As the onlytext currently available on the vital topic of seismic bridgedesign, it provides an indispensable reference for civil,structural, and geotechnical engineers, as well as students inrelated engineering courses. A state-of-the-art text on earthquake-proof design and retrofit ofbridges Seismic Design and Retrofit of Bridges fills the urgent need for acomprehensive and up-to-date text on seismic-ally resistant bridgedesign. The authors, all recognized leaders in the field,systematically cover all aspects of bridge design related toseismic resistance for both new and existing bridges. * A complete overview of current design philosophy for bridges,with related seismic and geotechnical considerations * Coverage of conceptual design constraints and their relationshipto current design alternatives * Modeling and analysis of bridge structures * An exhaustive look at common building materials and theirresponse to seismic activity * A hands-on approach to the capacity design process * Use of isolation and dissipation devices in bridge design * Important coverage of seismic assessment and retrofit design ofexisting bridges

Book Abstract Journal in Earthquake Engineering

Download or read book Abstract Journal in Earthquake Engineering written by and published by . This book was released on 1995 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: