EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Simulation  Modeling  and Programming for Autonomous Robots

Download or read book Simulation Modeling and Programming for Autonomous Robots written by Davide Brugali and published by Springer. This book was released on 2014-09-19 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 4th International Conference on Simulation, Modeling, and Programming for Autonomous Robots, SIMPAR 2014, held in Bergamo, Italy, in October 2014. The 49 revised full papers presented were carefully reviewed and selected from 62 submissions. The papers are organized in topical sections on simulation, modeling, programming, architectures, methods and tools, and systems and applications.

Book Simulation  Modeling  and Programming for Autonomous Robots

Download or read book Simulation Modeling and Programming for Autonomous Robots written by Stefano Carpin and published by Springer Science & Business Media. This book was released on 2008-10-23 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the First International Conference on Simulation, Modeling, and Programming for Autonomous Robots, SIMPAR 2008, held in Venice, Italy, in November 2008. The 29 revised full papers and 21 revised poster papers presented were carefully reviewed and selected from 42 submissions. The papers address all current issues of robotics applications and simulation environments thereof, such as 3D robot simulation, reliability, scalability and validation of robot simulation, simulated sensors and actuators, offline simulation of robot design, online simulation with real­time constraints, simulation with software/hardware-in-the-loop, middleware for robotics, modeling framework for robots and environments, testing and validation of robot control software, standardization for robotic services, communication infrastructures in distributed robotics, interaction between sensor networks and robots, human robot interaction, and multi­robot. The papers are organized in topical sections on simulation, programming, and applications.

Book Simulation  Modeling  and Programming for Autonomous Robots

Download or read book Simulation Modeling and Programming for Autonomous Robots written by Itsuki Noda and published by Springer. This book was released on 2012-10-20 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the Third International Conference on Simulation, Modeling, and Programming for Autonomous Robots, SIMPAR 2012, held in Tsukuba, Japan, in November 2012. The 33 revised full papers and presented together with 3 invited talks were carefully reviewed and selected from 46 submissions. Ten papers describe design of complex behaviors of autonomous robots, 9 address software layers, 8 papers refer to related modeling and learning. The papers are organized in topical sections on mobile robots, software modeling and architecture and humanoid and biped robots.

Book Simulation  Modeling  and Programming for Autonomous Robots

Download or read book Simulation Modeling and Programming for Autonomous Robots written by Noriako Ando and published by Springer. This book was released on 2010-11-11 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why are the many highly capable autonomous robots that have been promised for novel applications driven by society, industry, and research not available - day despite the tremendous progress in robotics science and systems achieved during the last decades? Unfortunately, steady improvements in speci?c robot abilities and robot hardware have not been matched by corresponding robot performance in real world environments. This is mainly due to the lack of - vancements in robot software that master the development of robotic systems of ever increasing complexity. In addition, fundamental open problems are still awaiting sound answers while the development of new robotics applications s- fersfromthelackofwidelyusedtools,libraries,andalgorithmsthataredesigned in a modular and performant manner with standardized interfaces. Simulation environments are playing a major role not only in reducing development time and cost, e. g. , by systematic software- or hardware-in-the-loop testing of robot performance, but also in exploring new types of robots and applications. H- ever,their use may still be regardedwith skepticism. Seamless migrationof code using robot simulators to real-world systems is still a rare circumstance, due to the complexity of robot, world, sensor, and actuator modeling. These challenges drive the quest for the next generation of methodologies and tools for robot development. The objective of the International Conference on Simulation, Modeling, and ProgrammingforAutonomous Robots (SIMPAR) is to o?er a unique forum for these topics and to bring together researchersfrom academia and industry to identify and solve the key issues necessary to ease the development of increasingly complex robot software.

Book 2018 IEEE International Conference on Simulation  Modeling  and Programming for Autonomous Robots  SIMPAR

Download or read book 2018 IEEE International Conference on Simulation Modeling and Programming for Autonomous Robots SIMPAR written by IEEE Staff and published by . This book was released on 2018-05-16 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: SIMPAR is the world s leading conference for simulation in robotics and automation

Book Simulation  Modeling  and Programming for Autonomous Robots

Download or read book Simulation Modeling and Programming for Autonomous Robots written by Stefano Carpin and published by . This book was released on 2008 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the First International Conference on Simulation, Modeling, and Programming for Autonomous Robots, SIMPAR 2008, held in Venice, Italy, in November 2008. The 29 revised full papers and 21 revised poster papers presented were carefully reviewed and selected from 42 submissions. The papers address all current issues of robotics applications and simulation environments thereof, such as 3D robot simulation, reliability, scalability and validation of robot simulation, simulated sensors and actuators, offline simulation of robot design, online simulation with realtime constraints, simulation with software/hardware-in-the-loop, middleware for robotics, modeling framework for robots and environments, testing and validation of robot control software, standardization for robotic services, communication infrastructures in distributed robotics, interaction between sensor networks and robots, human robot interaction, and multirobot. The papers are organized in topical sections on simulation, programming, and applications.

Book 2016 IEEE International Conference on Simulation  Modeling  and Programming for Autonomous Robots  SIMPAR

Download or read book 2016 IEEE International Conference on Simulation Modeling and Programming for Autonomous Robots SIMPAR written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Topics of interest include, but are not limited to 3D robot simulation and mathematical modeling of robots Machine learning Reliability, scalability and validation of robot simulation Simulated sensors and actuators Offline simulation of robot design Online simulation with real time constraints Simulation with software hardware in the loop Middleware for robotics Modeling framework for robots and environments Testing and validation of robot software Standardization for robotic services Communication infrastructures in distributed robotics Interaction between sensor networks and robots Human robot interaction and collaboration Multi robot systems.

Book 2016 IEEE International Conference on Simulation  Modeling  and Programming for Autonomous Robots  SIMPAR

Download or read book 2016 IEEE International Conference on Simulation Modeling and Programming for Autonomous Robots SIMPAR written by IEEE Staff and published by . This book was released on 2016-12-13 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics of interest include, but are not limited to 3D robot simulation and mathematical modeling of robots Machine learning Reliability, scalability and validation of robot simulation Simulated sensors and actuators Offline simulation of robot design Online simulation with real time constraints Simulation with software hardware in the loop Middleware for robotics Modeling framework for robots and environments Testing and validation of robot software Standardization for robotic services Communication infrastructures in distributed robotics Interaction between sensor networks and robots Human robot interaction and collaboration Multi robot systems

Book Simulation  Modeling  and Programming for Autonomous Robots

Download or read book Simulation Modeling and Programming for Autonomous Robots written by Noriako Ando and published by Springer Science & Business Media. This book was released on 2010-11-05 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why are the many highly capable autonomous robots that have been promised for novel applications driven by society, industry, and research not available - day despite the tremendous progress in robotics science and systems achieved during the last decades? Unfortunately, steady improvements in speci?c robot abilities and robot hardware have not been matched by corresponding robot performance in real world environments. This is mainly due to the lack of - vancements in robot software that master the development of robotic systems of ever increasing complexity. In addition, fundamental open problems are still awaiting sound answers while the development of new robotics applications s- fersfromthelackofwidelyusedtools,libraries,andalgorithmsthataredesigned in a modular and performant manner with standardized interfaces. Simulation environments are playing a major role not only in reducing development time and cost, e. g. , by systematic software- or hardware-in-the-loop testing of robot performance, but also in exploring new types of robots and applications. H- ever,their use may still be regardedwith skepticism. Seamless migrationof code using robot simulators to real-world systems is still a rare circumstance, due to the complexity of robot, world, sensor, and actuator modeling. These challenges drive the quest for the next generation of methodologies and tools for robot development. The objective of the International Conference on Simulation, Modeling, and ProgrammingforAutonomous Robots (SIMPAR) is to o?er a unique forum for these topics and to bring together researchersfrom academia and industry to identify and solve the key issues necessary to ease the development of increasingly complex robot software.

Book Hands On ROS for Robotics Programming

Download or read book Hands On ROS for Robotics Programming written by Bernardo Ronquillo Japón and published by Packt Publishing Ltd. This book was released on 2020-02-26 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Take your ROS skills to the next level by implementing complex robot structures in a ROS simulation Key FeaturesLearn fundamental ROS concepts and apply them to solve navigation tasksWork with single board computers to program smart behavior in mobile robotsUnderstand how specific characteristics of the physical environment influence your robot’s performanceBook Description Connecting a physical robot to a robot simulation using the Robot Operating System (ROS) infrastructure is one of the most common challenges faced by ROS engineers. With this book, you'll learn how to simulate a robot in a virtual environment and achieve desired behavior in equivalent real-world scenarios. This book starts with an introduction to GoPiGo3 and the sensors and actuators with which it is equipped. You'll then work with GoPiGo3's digital twin by creating a 3D model from scratch and running a simulation in ROS using Gazebo. Next, the book will show you how to use GoPiGo3 to build and run an autonomous mobile robot that is aware of its surroundings. Finally, you'll find out how a robot can learn tasks that have not been programmed in the code but are acquired by observing its environment. You'll even cover topics such as deep learning and reinforcement learning. By the end of this robot programming book, you'll be well-versed with the basics of building specific-purpose applications in robotics and developing highly intelligent autonomous robots from scratch. What you will learnGet to grips with developing environment-aware robotsGain insights into how your robots will react in physical environmentsBreak down a desired behavior into a chain of robot actionsRelate data from sensors with context to produce adaptive responsesApply reinforcement learning to allow your robot to learn by trial and errorImplement deep learning to enable your robot to recognize its surroundingsWho this book is for If you are an engineer looking to build AI-powered robots using the ROS framework, this book is for you. Robotics enthusiasts and hobbyists who want to develop their own ROS robotics projects will also find this book useful. Knowledge of Python and/or C++ programming and familiarity with single board computers such as Raspberry Pi is necessary to get the most out of this book.

Book Mastering ROS for Robotics Programming

Download or read book Mastering ROS for Robotics Programming written by Lentin Joseph and published by Packt Publishing Ltd. This book was released on 2015-12-21 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design, build and simulate complex robots using Robot Operating System and master its out-of-the-box functionalities About This Book Develop complex robotic applications using ROS for interfacing robot manipulators and mobile robots with the help of high end robotic sensors Gain insights into autonomous navigation in mobile robot and motion planning in robot manipulators Discover the best practices and troubleshooting solutions everyone needs when working on ROS Who This Book Is For If you are a robotics enthusiast or researcher who wants to learn more about building robot applications using ROS, this book is for you. In order to learn from this book, you should have a basic knowledge of ROS, GNU/Linux, and C++ programming concepts. The book will also be good for programmers who want to explore the advanced features of ROS. What You Will Learn Create a robot model of a Seven-DOF robotic arm and a differential wheeled mobile robot Work with motion planning of a Seven-DOF arm using MoveIt! Implement autonomous navigation in differential drive robots using SLAM and AMCL packages in ROS Dig deep into the ROS Pluginlib, ROS nodelets, and Gazebo plugins Interface I/O boards such as Arduino, Robot sensors, and High end actuators with ROS Simulation and motion planning of ABB and Universal arm using ROS Industrial Explore the ROS framework using its latest version In Detail The area of robotics is gaining huge momentum among corporate people, researchers, hobbyists, and students. The major challenge in robotics is its controlling software. The Robot Operating System (ROS) is a modular software platform to develop generic robotic applications. This book discusses the advanced concepts in robotics and how to program using ROS. It starts with deep overview of the ROS framework, which will give you a clear idea of how ROS really works. During the course of the book, you will learn how to build models of complex robots, and simulate and interface the robot using the ROS MoveIt motion planning library and ROS navigation stacks. After discussing robot manipulation and navigation in robots, you will get to grips with the interfacing I/O boards, sensors, and actuators of ROS. One of the essential ingredients of robots are vision sensors, and an entire chapter is dedicated to the vision sensor, its interfacing in ROS, and its programming. You will discuss the hardware interfacing and simulation of complex robot to ROS and ROS Industrial (Package used for interfacing industrial robots). Finally, you will get to know the best practices to follow when programming using ROS. Style and approach This is a simplified guide to help you learn and master advanced topics in ROS using hands-on examples.

Book Autonomous Robots

Download or read book Autonomous Robots written by Farbod Fahimi and published by Springer Science & Business Media. This book was released on 2008-10-25 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is at least two decades since the conventional robotic manipulators have become a common manufacturing tool for different industries, from automotive to pharmaceutical. The proven benefits of utilizing robotic manipulators for manufacturing in different industries motivated scientists and researchers to try to extend the applications of robots to many other areas by inventing several new types of robots other than conventional manipulators. The new types of robots can be categorized in two groups; redundant (and hyper-redundant) manipulators, and mobile (ground, marine, and aerial) robots. These groups of robots, known as advanced robots, have more freedom for their mobility, which allows them to do tasks that the conventional manipulators cannot do. Engineers have taken advantage of the extra mobility of the advanced robots to make them work in constrained environments, ranging from limited joint motions for redundant (or hyper-redundant) manipulators to obstacles in the way of mobile (ground, marine, and aerial) robots. Since these constraints usually depend on the work environment, they are variable. Engineers have had to invent methods to allow the robots to deal with a variety of constraints automatically. A robot that is equipped with those methods is called an Autonomous Robot. Autonomous Robots: Kinematics, Path Planning, and Control covers the kinematics and dynamic modeling/analysis of Autonomous Robots, as well as the methods suitable for their control. The text is suitable for mechanical and electrical engineers who want to familiarize themselves with methods of modeling/analysis/control that have been proven efficient through research.

Book Introduction to Autonomous Robots

Download or read book Introduction to Autonomous Robots written by Nikolaus Correll and published by . This book was released on 2016-04-25 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces concepts in mobile, autonomous robotics to 3rd-4th year students in Computer Science or a related discipline. The book covers principles of robot motion, forward and inverse kinematics of robotic arms and simple wheeled platforms, perception, error propagation, localization and simultaneous localization and mapping. The cover picture shows a wind-up toy that is smart enough to not fall off a table just using intelligent mechanism design and illustrate the importance of the mechanism in designing intelligent, autonomous systems. This book is open source, open to contributions, and released under a creative common license.

Book Software Engineering for Robotics

Download or read book Software Engineering for Robotics written by Ana Cavalcanti and published by Springer Nature. This book was released on 2021-07-05 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topics covered in this book range from modeling and programming languages and environments, via approaches for design and verification, to issues of ethics and regulation. In terms of techniques, there are results on model-based engineering, product lines, mission specification, component-based development, simulation, testing, and proof. Applications range from manufacturing to service robots, to autonomous vehicles, and even robots than evolve in the real world. A final chapter summarizes issues on ethics and regulation based on discussions from a panel of experts. The origin of this book is a two-day event, entitled RoboSoft, that took place in November 2019, in London. Organized with the generous support of the Royal Academy of Engineering and the University of York, UK, RoboSoft brought together more than 100 scientists, engineers and practitioners from all over the world, representing 70 international institutions. The intended readership includes researchers and practitioners with all levels of experience interested in working in the area of robotics, and software engineering more generally. The chapters are all self-contained, include explanations of the core concepts, and finish with a discussion of directions for further work. Chapters 'Towards Autonomous Robot Evolution', 'Composition, Separation of Roles and Model-Driven Approaches as Enabler of a Robotics Software Ecosystem' and 'Verifiable Autonomy and Responsible Robotics' are available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.

Book Our Robots  Ourselves

Download or read book Our Robots Ourselves written by David A. Mindell and published by Penguin. This book was released on 2015-10-13 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: “[An] essential book… it is required reading as we seriously engage one of the most important debates of our time.”—Sherry Turkle, author of Reclaiming Conversation: The Power of Talk in a Digital Age From drones to Mars rovers—an exploration of the most innovative use of robots today and a provocative argument for the crucial role of humans in our increasingly technological future. In Our Robots, Ourselves, David Mindell offers a fascinating behind-the-scenes look at the cutting edge of robotics today, debunking commonly held myths and exploring the rapidly changing relationships between humans and machines. Drawing on firsthand experience, extensive interviews, and the latest research from MIT and elsewhere, Mindell takes us to extreme environments—high atmosphere, deep ocean, and outer space—to reveal where the most advanced robotics already exist. In these environments, scientists use robots to discover new information about ancient civilizations, to map some of the world’s largest geological features, and even to “commute” to Mars to conduct daily experiments. But these tools of air, sea, and space also forecast the dangers, ethical quandaries, and unintended consequences of a future in which robotics and automation suffuse our everyday lives. Mindell argues that the stark lines we’ve drawn between human and not human, manual and automated, aren’t helpful for understanding our relationship with robotics. Brilliantly researched and accessibly written, Our Robots, Ourselves clarifies misconceptions about the autonomous robot, offering instead a hopeful message about what he calls “rich human presence” at the center of the technological landscape we are now creating.