Download or read book Faecal Sludge Management written by Linda Strande and published by IWA Publishing. This book was released on 2014-08-15 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is estimated that literally billions of residents in urban and peri-urban areas of Africa, Asia, and Latin America are served by onsite sanitation systems (e.g. various types of latrines and septic tanks). Until recently, the management of faecal sludge from these onsite systems has been grossly neglected, partially as a result of them being considered temporary solutions until sewer-based systems could be implemented. However, the perception of onsite or decentralized sanitation technologies for urban areas is gradually changing, and is increasingly being considered as long-term, sustainable options in urban areas, especially in low- and middle-income countries that lack sewer infrastructures. This is the first book dedicated to faecal sludge management. It compiles the current state of knowledge of the rapidly evolving field of faecal sludge management, and presents an integrated approach that includes technology, management, and planning based on Sandecs 20 years of experience in the field. Faecal Sludge Management: Systems Approach for Implementation and Operation addresses the organization of the entire faecal sludge management service chain, from the collection and transport of sludge, and the current state of knowledge of treatment options, to the final end use or disposal of treated sludge. The book also presents important factors to consider when evaluating and upscaling new treatment technology options. The book is designed for undergraduate and graduate students, and engineers and practitioners in the field who have some basic knowledge of environmental and/or wastewater engineering.

Download or read book Agrindex written by and published by . This book was released on 1994 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Oxidation Processes for Water and Wastewater Treatment written by Simon Parsons and published by IWA Publishing. This book was released on 2004-03-01 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The suitability of Advanced Oxidation Processes (AOPs) for pollutant degradation was recognised in the early 1970s and much research and development work has been undertaken to commercialise some of these processes. AOPs have shown great potential in treating pollutants at both low and high concentrations and have found applications as diverse as ground water treatment, municipal wastewater sludge destruction and VOCs control. Advanced Oxidation Processes for Water and Wastewater Treatment is an overview of the advanced oxidation processes currently used or proposed for the remediation of water, wastewater, odours and sludge. The book contains two opening chapters which present introductions to advanced oxidation processes and a background to UV photolysis, seven chapters focusing on individual advanced oxidation processes and, finally, three chapters concentrating on selected applications of advanced oxidation processes. Advanced Oxidation Processes for Water and Wastewater Treatment will be invaluable to readers interested in water and wastewater treatment processes, including professionals and suppliers, as well as students and academics studying in this area. Dr Simon Parsons is a Senior Lecturer in Water Sciences at Cranfield University with ten years' experience of industrial and academic research and development.

Download or read book Microplastics in Water and Wastewater written by Hrissi K. Karapanagioti and published by IWA Publishing. This book was released on 2019-09-15 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the topic of microplastics in water and wastewater. The chapters start with introductory issues related to the growing interest in the scientific community on microplastics and the human water cycle and point out where the microplastics could interact with water. The subsequent chapters examine evidence of the microplastic presence in freshwater, such as in both rivers and lakes, in freshwater biota, and hazardous chemicals associated with microplastics in such systems. Another set of chapters discuss the presence of microplastics in wastewater: their sources; their transfer through a wastewater treatment plant; the concentration of microplastics in effluents throughout the world; the plastic biomedia used in wastewater treatment plants and the effect on the surrounding environment of effluent wastewater pipes. These chapters also discuss the sampling methods, the sample treatment and analysis techniques used so far for microplastics in wastewater. Additionally, the presence of microplastics in sewage sludge and in soils irrigated with wastewater or fertilized with sludge are discussed. The possible impact of plastics and their additives on plants, microalgae, and humans are reviewed and presented in a critical way. Finally, a chapter summarizes all the relevant regulations and initiatives that point to the necessity of a global directive for the protection of the environment from plastic and microplastic pollution. The topic of microplastics in freshwater systems and in wastewater has scarcely been studied and requires more attention. Microplastics in Water and Wastewater aims to bring these initial findings to the attention of a broader audience and especially to operators and managers of freshwater and wastewater systems. It will also be helpful to people already aware of the marine debris problem to understand the sources of microplastics in the oceans, from freshwater systems and wastewater treatment plants.

Download or read book Microbial Growth in Drinking Water Supplies written by Dick van der Kooij and published by IWA Publishing. This book was released on 2013-09-14 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintaining the microbial quality in distribution systems and connected installations remains a challenge for the water supply companies all over the world, despite many years of research. This book identifies the main concerns and knowledge gaps related to regrowth and stimulates cooperation in future research. Microbial Growth in Drinking Water Supplies provides an overview of the regrowth issue in different countries and the water quality problems related to regrowth. The book assesses the causes of regrowth in drinking water and the prevention of regrowth by water treatment and distribution. Editors: Dirk van der Kooij and Paul W.J.J. van der Wielen, KWR Watercycle Research Institute, The Netherlands

Download or read book ICREEC 2019 written by Ahmed Belasri and published by Springer Nature. This book was released on 2020-06-10 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights peer reviewed articles from the 1st International Conference on Renewable Energy and Energy Conversion, ICREEC 2019, held at Oran in Algeria. It presents recent advances, brings together researchers and professionals in the area and presents a platform to exchange ideas and establish opportunities for a sustainable future. Topics covered in this proceedings, but not limited to, are photovoltaic systems, bioenergy, laser and plasma technology, fluid and flow for energy, software for energy and impact of energy on the environment.

Download or read book How to Design Wastewater Systems for Local Conditions in Developing Countries written by David M. Robbins and published by IWA Publishing. This book was released on 2014-03-15 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a practical handbook providing a step-by-step approach to the techniques used for characterizing wastewater sources and investigating sites where collection, treatment and reuse/disposal technologies will be installed. It is intended to help enable local implementation of on-site and decentralized wastewater management system (DWMS)for wide scale use in development settings. How to Design Wastewater Systems for Local Conditions in Developing Countries helps local service providers and regulatory officials make informed decisions through the use of tools, checklists and case studies. It includes a link to a web based community of on-site and decentralized wastewater professionals, which contains related tools and case studies. This handbook serves as a reference for training classes, certification programs, and higher education programs in civil and sanitary engineering. There is an increasing interest on the part of local government officials and private sector service providers to implement wastewater treatment systems to solve sanitation problems. The model presented in this handbook promotes activities that first generate data related to source and site conditions that represent critical inputs, and then applies this information to the technology selection process. Matching the most appropriate technologies to the specific needs of the wastewater project is the key that leads to long term sustainability. How to Design Wastewater Systems for Local Conditions in Developing Countries is an invaluable resource for public sector decision makers and private sector service providers in developing countries. It is also a useful text for students at engineering colleges in developing countries interested in taking a class that teaches the methods of decentralized wastewater management system (DWMS) development.

Download or read book Integrated Coastal Zone Management of Coral Reefs written by Kent Gustavson and published by World Bank Publications. This book was released on 2000 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The applied research indicates that, to improve awareness, park education programs should be targeted specifically to the user groups primarily through outreach programs. Further, the Park's management programs should be highlighted, particularly the beneficial, tangible products and services (benefits) the Park provides to each user group... The closer the tie between reef conditions and business earnings, the greater the users' support for reef conservation." Coral reefs are sometimes referred to as "canaries of the sea" because of their early warning ability to show near-shore oceanic stress. Because of their biological diversity, they are also called "rainforests of the sea." Coral reefs are vital to the well being of millions of people. Coral reef managers and government officials trying to save their valuable national resources have turned to research on coral reefs for help. The research presented in this publication merits a great deal of notice because the output is useful for decision support and training tools in integrated coastal zone management (ICZM). The work on cost-effectiveness analysis has developed integrated economic and ecological models, relying extensively on fuzzy logic procedures to model impacts and effects of interventions within the reef environment. By contrast, the marine system valuation work provides economic valuations of coral reefs, demonstrating the use of different modeling methods and treating key policy issues within this context. This publication will interest coastal zone experts and managers worldwide

Download or read book Guidance Manual for Sewage Treatment Plant Process Audits written by Canada. Environment Canada and published by [Gatineau, Québec] : Environment Canada. This book was released on 2006-01-01 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book New Horizons in Biotechnology written by S. Roussos and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: The practice of biotechnology, though different in style, scale and substance in globalizing science for development involves all countries. Investment in biotechnology in the industrialised, the developing, and the least developed countries, is now amongst the widely accepted avenues being used for economie development. The simple utilization of kefir technology, the detoxification of injurious chemical pesticides e.g. parathion, the genetic tailoring of new crops, and the production of a first of a kind of biopharmaceuticals illustrate the global scope and content of biotechnology research endeavour and effort. In the developing and least developed nations, and in which the 9 most populous countries· are encountered, problems concerning management of the environment, food security, conservation of human health resources and capacity building are important factors that influence the path to sustainable development. Long-term use of biotechnology in the agricultural, food, energy and health sectors is expected to yield a windfall of economic, environmental and social benefits. Already the prototypes of new medicines and of prescription fruit vaccines are available. Gene based agriculture and medieine is increasingly being adopted and accepted. Emerging trends and practices are reflected in the designing of more efficient bioprocesses, and in new research in enzyme and fermentation technology, in the bioconversion of agro industrial residues into bio-utility products, in animal healthcare, and in the bioremediation and medical biotechnologies. Indeed, with each new day, new horizons in biotechnology beckon.

Download or read book The Seine River Basin written by Nicolas Flipo and published by Springer Nature. This book was released on 2021-01-30 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book reviews the water-agro-food and socio-eco-system of the Seine River basin (76,000 km2), and offers a historical perspective on the river’s long-term contamination. The Seine basin is inhabited by circa 17 million people and is impacted by intensive agricultural practices and industrial activities. These pressures have gradually affected its hydrological, chemical and ecological functioning, leading to a maximum chemical degradation between the 1960s and the 1990s. Over the last three decades, while major water-quality improvements have been observed, new issues (e.g. endocrine disruptors, microplastics) have also emerged. The state of the Seine River network, from the headwaters to estuary, is increasingly controlled by the balance between pressures and social responses. This socio-ecosystem provides a unique example of the functioning of a territory under heavy anthropogenic pressure during the Anthropocene era. The achievements made were possible due to the long-term PIREN Seine research program, established in 1989 and today part of the French socio-ecological research network “Zones Ateliers”, itself part of the international Long-term Socio-economic and Ecological Research Network (LTSER). Written by experts in the field, the book provides an introduction to the water budget and the territorial metabolism of the Seine basin, and studies the trajectories and impact of various pollutants in the Seine River. It offers insights into the ecological functioning, the integration of agricultural practices, the analysis of aquatic organic matter, and the evolution of fish assemblages in the Seine basin, and also presents research perspectives and approaches to improve the water quality of the Seine River. Given its scope, it will appeal to environmental managers, scientists and policymakers interested in the long-term contamination of the Seine River.

Download or read book Design and Modeling of Mechanical Systems written by Mohamed Haddar and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 5th International Congress on Design and Modeling of Mechanical Systems (CMSM) was held in Djerba, Tunisia on March 25-27, 2013 and followed four previous successful editions, which brought together international experts in the fields of design and modeling of mechanical systems, thus contributing to the exchange of information and skills and leading to a considerable progress in research among the participating teams. The fifth edition of the congress (CMSM ́2013), organized by the Unit of Mechanics, Modeling and Manufacturing (U2MP) of the National School of Engineers of Sfax, Tunisia, the Mechanical Engineering Laboratory (MBL) of the National School of Engineers of Monastir, Tunisia and the Mechanics Laboratory of Sousse (LMS) of the National School of Engineers of Sousse, Tunisia, saw a significant increase of the international participation. This edition brought together nearly 300 attendees who exposed their work on the following topics: mechatronics and robotics, dynamics of mechanical systems, fluid structure interaction and vibroacoustics, modeling and analysis of materials and structures, design and manufacturing of mechanical systems. This book is the proceedings of CMSM ́2013 and contains a careful selection of high quality contributions, which were exposed during various sessions of the congress. The original articles presented here provide an overview of recent research advancements accomplished in the field mechanical engineering.

Download or read book Advances in Hydroinformatics written by Philippe Gourbesville and published by Springer. This book was released on 2018-02-26 with total page 1205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers a collection of extended papers based on presentations given during the SimHydro 2017 conference, held in Sophia Antipolis, Nice, France on June 14–16, 2017. It focuses on how to choose the right model in applied hydraulics and considers various aspects, including the modeling and simulation of fast hydraulic transients, 3D modeling, uncertainties and multiphase flows. The book explores both limitations and performance of current models and presents the latest developments in new numerical schemes, high-performance computing, multiphysics and multiscale methods, and better interaction with field or scale model data. It gathers the lastest theoretical and innovative developments in the modeling field and presents some of the most advance applications on various water related topics like uncertainties, flood simulation and complex hydraulic applications. Given its breadth of coverage, it addresses the needs and interests of practitioners, stakeholders, researchers and engineers alike.

Download or read book Compendium of Sanitation Systems and Technologies written by Elizabeth Tilley and published by . This book was released on 2014 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Groundwater Modelling in Arid and Semi Arid Areas written by Howard S. Wheater and published by Cambridge University Press. This book was released on 2010-09-09 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Arid and semi-arid regions face major challenges in the management of scarce freshwater resources under pressures of population, economic development, climate change, pollution and over-abstraction. Groundwater is commonly the most important water resource in these areas. Groundwater models are widely used globally to understand groundwater systems and to guide decisions on management. However, the hydrology of arid and semi-arid areas is very different from that of humid regions, and there is little guidance on the special challenges of groundwater modelling for these areas. This book brings together the experience of internationally leading experts to fill a gap in the scientific and technical literature. It introduces state-of-the-art methods for modelling groundwater resources, illustrated with a wide-ranging set of illustrative examples from around the world. The book is valuable for researchers, practitioners in developed and developing countries, and graduate students in hydrology, hydrogeology, water resources management, environmental engineering and geography.

Download or read book Activated Sludge Separation Problems written by Valter Tandoi and published by IWA Publishing. This book was released on 2017-09-15 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated Sludge Separation Problems: Theory, Control Measures, Practical Experiences, Second Edition, describes the most common activated sludge separation problems and explains the main reasons for the growth of the different filamentous microorganisms in activated sludge. The book summarizes the identification techniques for important groups of activated sludge microorganisms both based on conventional microscopic analysis and using the biological molecular tools available today (FISH and PCR). This new edition, with 70% new and updated material, also provides explanation of basic activated sludge process principles and of parameters necessary for process control and operation. The theory of secondary clarifies is described to the extent necessary for understanding the construction and operation of secondary clarifiers. The activated sludge reactor and secondary clarifies are treated as one system and the interactions are explained. The wide range of experiences around the world is documented and the methods to avoid the proliferation of these organisms are presented and critically reviewed. Activated Sludge Separation Problems consists of six chapters, presenting up-to-date technical and scientific aspects of these processes. The new edition also features an extended list of literature references for further reading. The book will be a valuable help for students of environmental engineering, wastewater specialists, plant operators and designers of activated sludge plants. It is also useful for specialists in wastewater operation laboratories, especially for those studying activated sludge separation properties.

Download or read book Guidelines for Using Activated Sludge Models written by Leiv Rieger and published by IWA Publishing. This book was released on 2012-09-14 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical modelling of activated sludge systems is used widely for plant design, optimisation, training, controller design and research. The quality of simulation studies varies depending on the project objectives, finances and expertise available. Consideration has to be given to the model accuracy and the amount of time required carrying out a simulation study to produce the desired accuracy. Inconsistent approaches and insufficient documentation make quality assessment and comparison of simulation results difficult or almost impossible. A general framework for the application of activated sludge models is needed in order to overcome these obstacles. The genesis of the Good Modelling Practice (GMP) Task Group lies in a workshop held at the 4th IWA World Water Congress in Marrakech, Morocco where members of research groups active in wastewater treatment modelling came together to develop plans to synthesize the best practices of modellers from all over the world. The most cited protocols were included in the work, amongst others from: HSG (Hochschulgruppe), STOWA, BIOMATH and WERF. The goal of the group is to set up an internationally accepted framework to deal with the ASM type models in practice. This framework shall make modelling more straightforward and systematic to use especially for practitioners and consultants. Additionally, it shall help to define quality levels for simulation results, a procedure to assess this quality and to assist in the proper use of the models. The framework will describe a methodology for goal-oriented application of activated sludge models demonstrated by means of a concise guideline about the procedure of a simulation study and some illustrative case studies. The case studies shall give examples for the required data quality and quantity and the effort for calibration/validation with respect to a defined goal. The final report will include an extended appendix with additional information and details of methodologies. Additional features in Guidelines for Using Activated Sludge Models include a chapter on modelling industrial wastewater, an overview on the history, current practice and future of activated sludge modelling and several explanatory case studies. It can be used as an introductory book to learn about Good Modelling Practice (GMP) in activated sludge modelling and will be of special interest for process engineers who have no prior knowledge of modelling or for lecturers who need a textbook for their students. The STR can also be used as a modelling reference book and includes an extended appendix with additional information and details of methodologies. Scientific and Technical Report No. 22