Download or read book Modeling and Simulation in Engineering written by Catalin Alexandru and published by BoD – Books on Demand. This book was released on 2012-03-07 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an open platform to establish and share knowledge developed by scholars, scientists, and engineers from all over the world, about various applications of the modeling and simulation in the design process of products, in various engineering fields. The book consists of 12 chapters arranged in two sections (3D Modeling and Virtual Prototyping), reflecting the multidimensionality of applications related to modeling and simulation. Some of the most recent modeling and simulation techniques, as well as some of the most accurate and sophisticated software in treating complex systems, are applied. All the original contributions in this book are jointed by the basic principle of a successful modeling and simulation process: as complex as necessary, and as simple as possible. The idea is to manipulate the simplifying assumptions in a way that reduces the complexity of the model (in order to make a real-time simulation), but without altering the precision of the results.
Download or read book Modeling and Simulation in the Systems Engineering Life Cycle written by Margaret L. Loper and published by Springer. This book was released on 2015-04-30 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This easy to read text provides a broad introduction to the fundamental concepts of modeling and simulation (M&S) and systems engineering, highlighting how M&S is used across the entire systems engineering lifecycle. Features: reviews the full breadth of technologies, methodologies and uses of M&S, rather than just focusing on a specific aspect of the field; presents contributions from specialists in each topic covered; introduces the foundational elements and processes that serve as the groundwork for understanding M&S; explores common methods and methodologies used in M&S; discusses how best to design and execute experiments, covering the use of Monte Carlo techniques, surrogate modeling and distributed simulation; explores the use of M&S throughout the systems development lifecycle, describing a number of methods, techniques, and tools available to support systems engineering processes; provides a selection of case studies illustrating the use of M&S in systems engineering across a variety of domains.
Download or read book Simulation Engineering written by Jim Ledin and published by CRC Press. This book was released on 2001-08-15 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build complex embedded systems faster and with lower costs by: * Knowing when and how much simulation testing is appropriate * Applying engineering methods to simulation design and development * Using the best tools available to develop simulations. * Va
Download or read book Clinical Simulation written by Gilles Chiniara and published by Academic Press. This book was released on 2019-08-21 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clinical Simulation: Education, Operations and Engineering, Second Edition, offers readers a restructured, comprehensive and updated approach to learn about simulation practices and techniques in a clinical setting. Featuring new and revised chapters from the industry’s top researchers and educators, this release gives readers the most updated data through modern pedagogy. This new edition has been restructured to highlight five major components of simulation education, including simulation scenarios as tools, student learning, faculty teaching, necessary subject matter, and the learning environment. With clear and efficient organization throughout the book, users will find this to be an ideal text for students and professionals alike. Edited by a leading educator, consultant and practitioner in the clinical simulation field Redesigned structure emphasizes the five components of simulation pedagogy Contains over 30 new chapters that feature the most up-to-date industry information and practices
Download or read book Modeling and Simulation in Industrial Engineering written by Mangey Ram and published by Springer. This book was released on 2017-08-11 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the latest research developments in modeling and simulation in industrial engineering. Topics such as decision and performance analysis and industrial control systems are described. Case studies in industry and services as well as engineering economy and cost estimation are also covered.
Download or read book Chemical Engineering Process Simulation written by Dominic Foo and published by Elsevier. This book was released on 2022-09-29 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Process Simulation, Second Edition guides users through chemical processes and unit operations using the main simulation software used in the industrial sector. The book helps predict the characteristics of a process using mathematical models and computer-aided process simulation tools, as well as how to model and simulate process performance before detailed process design takes place. Content coverage includes steady-state and dynamic simulation, process design, control and optimization. In addition, readers will learn about the simulation of natural gas, biochemical, wastewater treatment and batch processes. Provides an updated and expanded new edition that contains 60-70% new content Guides readers through chemical processes and unit operations using the primary simulation software used in the industrial sector Covers the fundamentals of process simulation, theory and advanced applications Includes case studies of various difficulty levels for practice and for applying developed skills Features step-by-step guides to using UniSim Design, SuperPro Designer, Symmetry, Aspen HYSYS and Aspen Plus for process simulation novices
Download or read book Engineering Principles of Combat Modeling and Distributed Simulation written by Andreas Tolk and published by John Wiley & Sons. This book was released on 2012-03-20 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the military and combat applications of modeling and simulation Engineering Principles of Combat Modeling and Distributed Simulation is the first book of its kind to address the three perspectives that simulation engineers must master for successful military and defense related modeling: the operational view (what needs to be modeled); the conceptual view (how to do combat modeling); and the technical view (how to conduct distributed simulation). Through methods from the fields of operations research, computer science, and engineering, readers are guided through the history, current training practices, and modern methodology related to combat modeling and distributed simulation systems. Comprised of contributions from leading international researchers and practitioners, this book provides a comprehensive overview of the engineering principles and state-of-the-art methods needed to address the many facets of combat modeling and distributed simulation and features the following four sections: Foundations introduces relevant topics and recommended practices, providing the needed basis for understanding the challenges associated with combat modeling and distributed simulation. Combat Modeling focuses on the challenges in human, social, cultural, and behavioral modeling such as the core processes of "move, shoot, look, and communicate" within a synthetic environment and also equips readers with the knowledge to fully understand the related concepts and limitations. Distributed Simulation introduces the main challenges of advanced distributed simulation, outlines the basics of validation and verification, and exhibits how these systems can support the operational environment of the warfighter. Advanced Topics highlights new and developing special topic areas, including mathematical applications fo combat modeling; combat modeling with high-level architecture and base object models; and virtual and interactive digital worlds. Featuring practical examples and applications relevant to industrial and government audiences, Engineering Principles of Combat Modeling and Distributed Simulation is an excellent resource for researchers and practitioners in the fields of operations research, military modeling, simulation, and computer science. Extensively classroom tested, the book is also ideal for courses on modeling and simulation; systems engineering; and combat modeling at the graduate level.
Download or read book Engineering Analysis with SOLIDWORKS Simulation 2016 written by Paul Kurowski and published by SDC Publications. This book was released on 2016-02 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Analysis with SOLIDWORKS Simulation 2016 goes beyond the standard software manual. Its unique approach concurrently introduces you to the SOLIDWORKS Simulation 2016 software and the fundamentals of Finite Element Analysis (FEA) through hands-on exercises. A number of projects are presented using commonly used parts to illustrate the analysis features of SOLIDWORKS Simulation. Each chapter is designed to build on the skills, experiences and understanding gained from the previous chapters.
Download or read book Handbook of Driving Simulation for Engineering Medicine and Psychology written by Donald L. Fisher and published by CRC Press. This book was released on 2011-04-25 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective use of driving simulators requires considerable technical and methodological skill along with considerable background knowledge. Acquiring the requisite knowledge and skills can be extraordinarily time consuming, yet there has been no single convenient and comprehensive source of information on the driving simulation research being conduc
Download or read book Model Engineering for Simulation written by Lin Zhang and published by Academic Press. This book was released on 2019-02-27 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Engineering for Simulation provides a systematic introduction to the implementation of generic, normalized and quantifiable modeling and simulation using DEVS formalism. It describes key technologies relating to model lifecycle management, including model description languages, complexity analysis, model management, service-oriented model composition, quantitative measurement of model credibility, and model validation and verification. The book clearly demonstrates how to construct computationally efficient, object-oriented simulations of DEVS models on parallel and distributed environments. Guides systems and control engineers in the practical creation and delivery of simulation models using DEVS formalism Provides practical methods to improve credibility of models and manage the model lifecycle Helps readers gain an overall understanding of model lifecycle management and analysis Supported by an online ancillary package that includes an instructors and student solutions manual
Download or read book Engineering Analysis with SOLIDWORKS Simulation 2019 written by Paul Kurowski and published by SDC Publications. This book was released on 2019-02-28 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Analysis with SOLIDWORKS Simulation 2019 goes beyond the standard software manual. Its unique approach concurrently introduces you to the SOLIDWORKS Simulation 2019 software and the fundamentals of Finite Element Analysis (FEA) through hands-on exercises. A number of projects are presented using commonly used parts to illustrate the analysis features of SOLIDWORKS Simulation. Each chapter is designed to build on the skills, experiences and understanding gained from the previous chapters. Topics covered Linear static analysis of parts and assembliesContact stress analysisFrequency (modal) analysisBuckling analysisThermal analysisDrop test analysisNonlinear analysisDynamic analysisRandom vibration analysish and p adaptive solution methodsModeling techniquesImplementation of FEA in the design processManagement of FEA projectsFEA terminology
Download or read book Timing Analysis and Simulation for Signal Integrity Engineers written by Greg Edlund and published by Pearson Education. This book was released on 2007-10-22 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every day, companies call upon their signal integrity engineers to make difficult decisions about design constraints and timing margins. Can I move these wires closer together? How many holes can I drill in this net? How far apart can I place these chips? Each design is unique: there’s no single recipe that answers all the questions. Today’s designs require ever greater precision, but design guides for specific digital interfaces are by nature conservative. Now, for the first time, there’s a complete guide to timing analysis and simulation that will help you manage the tradeoffs between signal integrity, performance, and cost. Writing from the perspective of a practicing SI engineer and team lead, Greg Edlund of IBM presents deep knowledge and quantitative techniques for making better decisions about digital interface design. Edlund shares his insights into how and why digital interfaces fail, revealing how fundamental sources of pathological effects can combine to create fault conditions. You won’t just learn Edlund’s expert techniques for avoiding failures: you’ll learn how to develop the right approach for your own projects and environment. Coverage includes • Systematically ensure that interfaces will operate with positive timing margin over the product’s lifetime–without incurring excess cost • Understand essential chip-to-chip timing concepts in the context of signal integrity • Collect the right information upfront, so you can analyze new designs more effectively • Review the circuits that store information in CMOS state machines–and how they fail • Learn how to time common-clock, source synchronous, and high-speed serial transfers • Thoroughly understand how interconnect electrical characteristics affect timing: propagation delay, impedance profile, crosstalk, resonances, and frequency-dependent loss • Model 3D discontinuities using electromagnetic field solvers • Walk through four case studies: coupled differential vias, land grid array connector, DDR2 memory data transfer, and PCI Express channel • Appendices present a refresher on SPICE modeling and a high-level conceptual framework for electromagnetic field behavior Objective, realistic, and practical, this is the signal integrity resource engineers have been searching for. Preface xiii Acknowledgments xvi About the Author xix About the Cover xx Chapter 1: Engineering Reliable Digital Interfaces 1 Chapter 2: Chip-to-Chip Timing 13 Chapter 3: Inside IO Circuits 39 Chapter 4: Modeling 3D Discontinuities 73 Chapter 5: Practical 3D Examples 101 Chapter 6: DDR2 Case Study 133 Chapter 7: PCI Express Case Study 175 Appendix A: A Short CMOS and SPICE Primer 209 Appendix B: A Stroll Through 3D Fields 219 Endnotes 233 Index 235
Download or read book Modeling and Simulation in Chemical Engineering written by Roger G. E. Franks and published by Wiley-Interscience. This book was released on 1972-06-16 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling and Simulation Based Life Cycle Engineering written by Ken Chong and published by CRC Press. This book was released on 2001-12-20 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in computational power have facilitated the development of simulations unprecedented in their computational size, scope of technical issues, spatial and temporal resolution, complexity and comprehensiveness. As a result, complex structures from airplanes to bridges can be almost completely based on model-based simulations. This book gives a state-of-the-art account of modeling and simulation of the life cycle of engineered systems, covering topics of design, fabrication, maintenance and disposal. Providing comprehensive coverage of this rapidly emerging field, Modeling and Simulation-Based Life Cycle Engineering is essential reading for civil, mechanical and manufacturing engineers. It will also appeal to students and academics in this area.
Download or read book Simulation of Industrial Processes for Control Engineers written by Philip J Thomas and published by Elsevier. This book was released on 1999-07-13 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer simulation is the key to comprehending and controlling the full-scale industrial plant used in the chemical, oil, gas and electrical power industries. Simulation of Industrial Processes for Control Engineers shows how to use the laws of physics and chemistry to produce the equations to simulate dynamically all the most important unit operations found in process and power plant.The book explains how to model chemical reactors, nuclear reactors, distillation columns, boilers, deaerators, refrigeration vessels, storage vessels for liquids and gases, liquid and gas flow through pipes and pipe networks, liquid and gas flow through installed control valves, control valve dynamics (including nonlinear effects such as static friction), oil and gas pipelines, heat exchangers, steam and gas turbines, compressors and pumps, as well as process controllers (including three methods of integral desaturation). The phenomenon of markedly different time responses ("stiffness") is considered and various ways are presented to get around the potential problem of slow execution time. The book demonstrates how linearization may be used to give a diverse check on the correctness of the as-programmed model and explains how formal techniques of model validation may be used to produce a quantitative check on the simulation model's overall validity.The material is based on many years' experience of modelling and simulation in the chemical and power industries, supplemented in recent years by university teaching at the undergraduate and postgraduate level. Several important new results are presented. The depth is sufficient to allow real industrial problems to be solved, thus making the book attractive to engineers working in industry. But the book's step-by-step approach makes the text appropriate also for post-graduate students of control engineering and for undergraduate students in electrical, mechanical and chemical engineering who are studying process control in their second year or later.
Download or read book Research Challenges in Modeling and Simulation for Engineering Complex Systems written by Richard Fujimoto and published by Springer. This book was released on 2017-08-18 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This illuminating text/reference presents a review of the key aspects of the modeling and simulation (M&S) life cycle, and examines the challenges of M&S in different application areas. The authoritative work offers valuable perspectives on the future of research in M&S, and its role in engineering complex systems. Topics and features: reviews the challenges of M&S for urban infrastructure, healthcare delivery, automated vehicle manufacturing, deep space missions, and acquisitions enterprise; outlines research issues relating to conceptual modeling, covering the development of explicit and unambiguous models, communication and decision-making, and architecture and services; considers key computational challenges in the execution of simulation models, in order to best exploit emerging computing platforms and technologies; examines efforts to understand and manage uncertainty inherent in M&S processes, and how these can be unified under a consistent theoretical and philosophical foundation; discusses the reuse of models and simulations to accelerate the simulation model development process. This thought-provoking volume offers important insights for all researchers involved in modeling and simulation across the full spectrum of disciplines and applications, defining a common research agenda to support the entire M&S research community.
Download or read book Engineering Analysis with SOLIDWORKS Simulation 2022 written by Paul Kurowski and published by SDC Publications. This book was released on with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Analysis with SOLIDWORKS Simulation 2022 goes beyond the standard software manual. Its unique approach concurrently introduces you to the SOLIDWORKS Simulation 2022 software and the fundamentals of Finite Element Analysis (FEA) through hands-on exercises. A number of projects are presented using commonly used parts to illustrate the analysis features of SOLIDWORKS Simulation. Each chapter is designed to build on the skills, experiences and understanding gained from the previous chapters. Topics covered • Linear static analysis of parts and assemblies • Contact stress analysis • Frequency (modal) analysis • Buckling analysis • Thermal analysis • Drop test analysis • Nonlinear analysis • Dynamic analysis • Random vibration analysis • h and p adaptive solution methods • Modeling techniques • Implementation of FEA in the design process • Management of FEA projects • FEA terminology
