Download or read book Simulation based Optimization of Design Operation and Control Factors for a Manufacturing Cell written by Barbara Joann Hurley and published by . This book was released on 1994 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2004 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Simulation Based Optimization Approach to Real Time Control and Scheduling of Flexible Manufacturing Systems written by Chong Peng and published by . This book was released on 2000 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book System Design Optimization for Product Manufacturing written by Masataka Yoshimura and published by Springer Science & Business Media. This book was released on 2010-02-28 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Readers of System Design Optimization for Product Manufacturing will learn about detailed concepts and practical technologies that enable successful product design and manufacture. These concepts and technologies are based on system optimization methodologies that consider a broad range of mechanical, as well as human, factors. System Design Optimization for Product Manufacturing explains the methodologies behind current and future product manufacture. Its detailed explanations of key concepts are relevant not only for product design and manufacture, but also for other business fields. These core concepts and methodologies can be applied to practically any field where informed decision-making is important, and where a range of often conflicting factors must be carefully weighed and considered. System Design Optimization for Product Manufacturing can be used as a fundamental reference book by both engineers and students in the fields of manufacturing, design engineering, and product development.
Download or read book Simulation based Optimization for Product and Process Design written by Lonneke Theodora Driessen and published by . This book was released on 2006 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book INFORMS Conference Program written by Institute for Operations Research and the Management Sciences. National Meeting and published by . This book was released on 1995 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Planning Design and Analysis of Cellular Manufacturing Systems written by A.K. Kamrani and published by Newnes. This book was released on 1995-04-11 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Leading researchers in the field of cellular manufacturing systems from academia and industry have contributed to this volume. The book aims to report the latest developments and address the central issues in the design and implementation of cellular manufacturing systems. Cellular Manufacturing (CM) is one of the major concepts used in the design of flexible manufacturing systems. CM, also known as group production or family programming, can be described as a manufacturing technique that produces families of parts within a single line or cell of machines. The first part of the book describes various techniques for design and modeling of cellular manufacturing systems. The second part is concerned with performance measure and analysis, followed by a section which presents the applications of artifical intelligence and computer tools in cellular manufacturing systems.
Download or read book Simulation based Methodology for the Design of World class Manufacturing Cells written by Maria de Los A. Irizarry and published by . This book was released on 1997 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling Manufacturing Systems written by Paolo Brandimarte and published by Springer Science & Business Media. This book was released on 1999-03-29 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced modeling techniques are a necessary tool in order to design and manage manufacturing systems effectively. This book contains a set of tutorial chapters on topics ranging from aggregate production planning to real time control, including predictive and reactive scheduling, flow management in assembly systems, simulation of robotic cells, design of manufacturing systems under uncertainty and a historical perspective on production management philosophies. The book will be of interest both to researchers and practitioners, including graduate students in Manufacturing Engineering and Operations Research.
Download or read book Facilities Design written by Sunderesh S. Heragu and published by CRC Press. This book was released on 2022-07-14 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dedicated to the proper design, layout, and location of facilities, this definitive textbook outlines the main design and operational problems that occur in manufacturing and service systems, explains the significance of facility design and planning problems, and describes how mathematical models can be used to help analyze and solve them. Combining theory with practice, this revised textbook presents state-of-the-art topics in materials handling, warehousing, and logistics along with real-world examples that emphasize the importance of modeling and analysis when determining a solution to complex facility design problems. Facilities Design, Fifth Edition includes a balanced coverage of modeling as well as applications of layout, materials handling, and warehousing. It presents automated materials handling along with queuing, queuing networks, and basic simulation modeling. The new edition introduces new material that includes topics such as supply chain designing and management, aggregate planning, and transportation, logistics, and distribution. The new edition will continue to provide access to available software and data files, as well as PowerPoint slides from the author’s own website www.facilitiesdesign.us. A solutions manual and figure slides are available for qualified textbooks adoptions. The book addresses facilities design and layout problems in manufacturing systems and covers layout, logistics, supply chain, aggregate planning, warehousing, and materials handling. The new edition continues to explain the ins and outs of facility planning and design and is an ideal textbook for students and a reference for professionals.
Download or read book Manufacturing Systems Control Design written by Stjepan Bogdan and published by Springer. This book was released on 2009-10-12 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers all the steps from identification of operations and resources to the transformation of virtual models into real-world algorithms. The matrix-based approach presented here is a solution to the real-time application of control in discrete event systems and flexible manufacturing systems (FMS), and offers a sound practical basis for the design of controllers for manufacturing systems.
Download or read book Cellular Manufacturing Systems written by Gürsel A. Süer and published by . This book was released on 2017-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chapters included in this book represent the work from the US, Canada, Japan, China, India, Iran, Netherlands, Turkey, Slovakia, and Portugal. The book attempts to cover the cellular manufacturing area from various angles. In terms of solution techniques, different approaches such as heuristics, mathematical models, networks models, genetic algorithm approaches, artificial neural networks, knowledge-based algorithms, a space search algorithm, simulated annealing, fuzzy concepts, analytic hierarchy processes and simulation are included in the book. As for performance measures, most chapters target a single objective whereas some others cover multiple objectives. In terms of the complexity of the problems, the authors divide them into simpler single phase problems versus more complex problems that require multiple-phase solutions. Most of the chapters discuss deterministic problems. On the other hand, a few of the chapters focus on stochastic cases. There are many new concepts and solution approaches covered in this book. The details of the material coverage is listed in the following paragraphs. The book starts with the evolution of cellular manufacturing. In terms of design-related issues, it covers the application of math modeling for cell formation, family and subfamily formation, production system selection, formation and evaluation of design alternatives, machine layout, dynamic cells, virtual cells, cell formation considering alternative routes, remainder cells, cell formation with product of life cycle considerations, demand-variability based cell formation, layered cellular design, assembly cells and a recent Japanese proposition called SERU cells. All types of cells, namely labor-intensive cells, machine-intensive cells and robotic cells are covered in the book. In terms of operational and control issues, human skills, manpower allocation, cell size determination, dispatching rules, parallel machine scheduling, flowshop scheduling, re-entrant flowshop scheduling, flexible job shop scheduling, assembly line balancing, process planning and scheduling, multiple-resource scheduling, cell loading and cell scheduling, synchronized flow, planning concepts such as period batch control, polka, Kanban, conwip and more are discussed. Cases studies include electromechanical assembly, bicycle manufacturing, igniter assembly system, jewelry manufacturing and semi-conductor industry. We believe that this book will be of value to students, researchers, academicians and practitioners.
Download or read book Cellular Manufacturing written by John X. Wang and published by CRC Press. This book was released on 2015-01-14 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today's business world, competitiveness defines the industrial leading edge. Organizations and businesses of all sizes are adopting Lean manufacturing practices to increase efficiency and address worries about their bottom lines. In a detailed review of this staple of Lean manufacturing, Cellular Manufacturing: Mitigating Risk and Uncertainty ou
Download or read book Advances in Manufacturing written by S. G. Tzafestas and published by Springer. This book was released on 1999-02-25 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern manufacturing systems involve many processes and operations at various hierarchical levels of decision, control and execution. New applications for systems are arising from the synergy of machines, tools, robots and computers with management and information technologies. Novel systems are designed and put into operation to manufacture old and new high-quality products with speed, accuracy and economy. This book contains over thirty papers that examine state-of-the-art and how-to-do issues, as well as new solutions. Topics covered include: Process planning/scheduling and machine-cell design Process monitoring, inspection, diagnosis and maintenance Forecasting, optimization and control Design and control of robotic automated crane systems Applications: including laser material processing, stereolithography systems, alimentary pasta processes and automated/robotic road construction and maintenance. The book explores key elements and critical factors, presents new results and tools that are applicable to real situations.
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 36 (thesis year 1991) a total of 11,024 thesis titles from 23 Canadian and 161 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 36 reports theses submitted in 1991, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Download or read book Journal of Applied Operational Research written by Kaveh Sheibani and published by ORLAB Analytics. This book was released on 2009-12-31 with total page 61 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are pleased to welcome readers to the first issue of Journal of Applied Operational Research (JAOR), Volume 1, Number 1. The journal reports on developments in all aspects of operational research, including the latest advances and applications. It is a primarily goal of the journal to focus on and publish practical case studies which illustrate real-life applications.
Download or read book Simulation Optimization for Manufacturing System Design written by Rohit Kumar and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
