Download or read book Simulation and Validation of Charge Carrier Drift in Pixelated Microstructured Semiconductor Neutron Detectors written by Diego Laramore and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A semiconductor neutron imaging device is proposed (X-MSND) based on high efficiency, Micro-structured Semiconductor Neutron Detector (MSNDs) bump bonded onto a Timepix pixelated readout chip. The device serves as a combined neutron and photon imager with a 256x256 pixel array, using per-pixel time-over-threshold (ToT) energy deposition. The X-MSND design has produced thermal neutron detection efficiency of 14%, significantly greater than the theoretical maximum of less than 5% for planar devices. Simulated pixel clusters showed similar qualitative characteristics as planar neutron sensitive Timepix hybrid detectors. A workflow for simulating the semiconductor physics, ionization by radiation, and charge carrier transport for micro-structured sensors in general has been devised and described in this work. The simulation workflow began by steady state initial conditions of the X-MSND PIN diode sensor at full bias using COMSOL Multiphysics. This simulation step served the combined purpose of providing the necessary electric field solutions used in charge transport, and provided necessary design and operating parameters for device fabrication. Radiation transport code Geant4 was used to simulate the radiation detection characteristics of the sensor: thermal neutron detection efficiency, energy deposition per detection event, and the location of the ionized charge cloud per interaction are all calculated at this step. Dassault SolidWorks was used to generate Computer-Assisted Drafting (CAD) models of the full micro-structured device geometry, which was then converted and imported into a format that can be interpreted by Geant4 for the radiation transport. Geant4 can then interface directly with a modified version of Allpix^2 to perform charge carrier drift over the entire X-MSND geometry. Fabricated X-MSND devices were tested and evaluated at Kansas State University (KSU), and were found capable of producing high quality radiographs with both X-rays and neutrons. The fabrication of functioning X-MSND/Timepix assemblies was a collaborative effort among several research groups at KSU, domestic and international industrial partners, and international research groups. Fabrication of the X-MSND sensors was performed largely by Radiation Detection Technologies, Inc., with parametric design support from the Radiological System Integration Laboratory (RSIL) and Radiological Engineering Analysis Laboratory (REAL). The processes used in the production of X-MSND sensors are conventional micro-electro-mechanical system (MEMS) photolithography techniques; spin-on deposition and ultraviolet development of photoresist, metal lift-off, and wet etching of silicon are all used over the course of fabrication, and are described in detail. The Electronics Design Laboratory (EDL) of Kansas State University assisted in the design of custom printed circuit boards to which the X-MSND/Timepix assemblies are mounted. External to facilities located at KSU, various industrial manufacturing partners who specialize in Very Large Scale Integration (VLSI) and micro-fabrication assembly processes were also contracted to perform the specialized assembly processes required in assembling the full X-MSND/Timepix systems.
Download or read book High Energy Neutron Detector written by Clyde Edward Wiegand and published by . This book was released on 1949 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is the purpose of this paper to describe a neutron detector suitable for monitoring a flux of neutrons whose energy is greater than about 50 Mev. Detection of the neutrons is accomplished by their ability to induce fission in heavy elements. Kelly and Wiegand studied the neutron fission of Bi, Pb, Ti, Hg, Au, and Pt at various neutron energies and the presently described counter is an application of this work.
Download or read book Oxide Electronics written by Asim K. Ray and published by John Wiley & Sons. This book was released on 2021-04-12 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxide Electronics Multiple disciplines converge in this insightful exploration of complex metal oxides and their functions and properties Oxide Electronics delivers a broad and comprehensive exploration of complex metal oxides designed to meet the multidisciplinary needs of electrical and electronic engineers, physicists, and material scientists. The distinguished author eschews complex mathematics whenever possible and focuses on the physical and functional properties of metal oxides in each chapter. Each of the sixteen chapters featured within the book begins with an abstract and an introduction to the topic, clear explanations are presented with graphical illustrations and relevant equations throughout the book. Numerous supporting references are included, and each chapter is self-contained, making them perfect for use both as a reference and as study material. Readers will learn how and why the field of oxide electronics is a key area of research and exploitation in materials science, electrical engineering, and semiconductor physics. The book encompasses every application area where the functional and electronic properties of various genres of oxides are exploited. Readers will also learn from topics like: Thorough discussions of High-k gate oxide for silicon heterostructure MOSFET devices and semiconductor-dielectric interfaces An exploration of printable high-mobility transparent amorphous oxide semiconductors Treatments of graphene oxide electronics, magnetic oxides, ferroelectric oxides, and materials for spin electronics Examinations of the calcium aluminate binary compound, perovoksites for photovoltaics, and oxide 2Degs Analyses of various applications for oxide electronics, including data storage, microprocessors, biomedical devices, LCDs, photovoltaic cells, TFTs, and sensors Suitable for researchers in semiconductor technology or working in materials science, electrical engineering, and physics, Oxide Electronics will also earn a place in the libraries of private industry researchers like device engineers working on electronic applications of oxide electronics. Engineers working on photovoltaics, sensors, or consumer electronics will also benefit from this book.
Download or read book Cosmic Ray Neutron Sensing written by International Atomic Energy Agency and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear and related techniques can help develop climate smart agricultural practices by optimizing water use efficiency. The measurement of soil water content is essential to improve the use of this resource in agriculture. However, most sensors monitor small areas (less than 1m in radius), hence a large number of sensors are needed to obtain soil water content across a large area. This can be both costly and labour intensive and so larger scale measuring devices are needed as an alternative to traditional point-based soil moisture sensing techniques. The cosmic ray neutron sensor (CRNS) is such a device that monitors soil water content in a non-invasive and continuous way. This publication provides background information about this novel technique, and explains in detail the calibration and validation process.
Download or read book Plastic Scintillators written by Matthieu Hamel and published by Springer Nature. This book was released on 2021-07-10 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the physics and chemistry of plastic scintillators (fluorescent polymers) that are able to emit light when exposed to ionizing radiation, discussing their chemical modification in the early 1950s and 1960s, as well as the renewed upsurge in interest in the 21st century. The book presents contributions from various researchers on broad aspects of plastic scintillators, from physics, chemistry, materials science and applications, covering topics such as the chemical nature of the polymer and/or the fluorophores, modification of the photophysical properties (decay time, emission wavelength) and loading of additives to make the material more sensitive to, e.g., fast neutrons, thermal neutrons or gamma rays. It also describes the benefits of recent technological advances for plastic scintillators, such as nanomaterials and quantum dots, which allow features that were previously not achievable with regular organic molecules or organometallics.
Download or read book Science of Microscopy written by P.W. Hawkes and published by Springer Science & Business Media. This book was released on 2008-08-29 with total page 1336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fully corrected second impression of the classic 2006 text on microscopy runs to more than 1,000 pages and covers up-to-the-minute developments in the field. The two-volume work brings together a slew of experts who present comprehensive reviews of all the latest instruments and new versions of the older ones, as well as their associated operational techniques. The chapters draw attention to their principal areas of application. A huge range of subjects are benefiting from these new tools, including semiconductor physics, medicine, molecular biology, the nanoworld in general, magnetism, and ferroelectricity. This fascinating book will be an indispensable guide for a wide range of scientists in university laboratories as well as engineers and scientists in industrial R&D departments.
Download or read book MEMS Materials and Processes Handbook written by Reza Ghodssi and published by Springer Science & Business Media. This book was released on 2011-03-18 with total page 1211 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMs Materials and Processes Handbook" is a comprehensive reference for researchers searching for new materials, properties of known materials, or specific processes available for MEMS fabrication. The content is separated into distinct sections on "Materials" and "Processes". The extensive Material Selection Guide" and a "Material Database" guides the reader through the selection of appropriate materials for the required task at hand. The "Processes" section of the book is organized as a catalog of various microfabrication processes, each with a brief introduction to the technology, as well as examples of common uses in MEMs.
Download or read book Theoretical Astrophysics written by Matthias Bartelmann and published by John Wiley & Sons. This book was released on 2013-09-03 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginning from first principles and adopting a modular structure, this book develops the fundamental physical methods needed to describe and understand a wide range of seemingly very diverse astrophysical phenomena and processes. For example, the discussion of radiation processes including their spectra is based on Larmor's equation and extended by the photon picture and the internal dynamics of radiating quantum systems, leading to the shapes of spectral lines and the ideas of radiation transport. Hydrodynamics begins with the concept of phase-space distribution functions and Boltzmann's equation and develops ideal, viscous and magneto-hydrodynamics all from the vanishing divergence of an energy-momentum tensor, opening a natural extension towards relativistic hydrodynamics. Linear stability analysis is introduced and used as a common and versatile tool throughout the book. Aimed at students at graduate level, lecturers teaching courses in theoretical astrophysics or advanced topics in modern astronomy, this book with its abundant examples and exercises also serves as a reference and an entry point for more advanced researchers wanting to update their knowledge of the physical processes that govern the behavior and evolution of astronomical objects.
Download or read book Engineering of Scintillation Materials and Radiation Technologies written by Mikhail Korzhik and published by Springer Nature. This book was released on 2019-09-13 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings book presents dual approaches to examining new theoretical models and their applicability in the search for new scintillation materials and, ultimately, the development of industrial technologies. The ISMART conferences bring together the radiation detector community, from fundamental research scientists to applied physics experts, engineers, and experts on the implementation of advanced solutions. This scientific forum builds a bridge between the different parts of the community and is the basis for multidisciplinary, cooperative research and development efforts. The main goals of the conference series are to review the latest results in scintillator development, from theory to applications, and to arrive at a deeper understanding of fundamental processes, as well as to discover components for the production of new generations of scintillation materials. The book highlights recent findings and hypotheses, key advances, as well as exotic detector designs and solutions, and includes papers on the microtheory of scintillation and the initial phase of luminescence development, applications of the various materials, as well as the development and characterization of ionizing radiation detection equipment. It also touches on the increased demand for cryogenic scintillators, the renaissance of garnet materials for scintillator applications, nano-structuring in scintillator development, trends in and applications for security, and exploration of hydrocarbons and ecological monitoring.
Download or read book Halide Perovskites written by Tze-Chien Sum and published by John Wiley & Sons. This book was released on 2019-03-25 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real insight from leading experts in the field into the causes of the unique photovoltaic performance of perovskite solar cells, describing the fundamentals of perovskite materials and device architectures. The authors cover materials research and development, device fabrication and engineering methodologies, as well as current knowledge extending beyond perovskite photovoltaics, such as the novel spin physics and multiferroic properties of this family of materials. Aimed at a better and clearer understanding of the latest developments in the hybrid perovskite field, this is a must-have for material scientists, chemists, physicists and engineers entering or already working in this booming field.
Download or read book Photon Counting Detectors for X ray Imaging written by Hiroaki Hayashi and published by Springer Nature. This book was released on 2021-02-15 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book first provides readers with an introduction to the underlying physics and state-of-the-art application of photon counting detectors for X-ray imaging. The authors explain that a photon-counting imaging detector can realize quantitative analysis because the detector can derive X-ray attenuation information based on the analysis of intensity changes of individual X-ray. To realize this analysis, it is important to consider the physics of an object and detector material. In this book, the authors introduce a novel analytical procedure to create quantitative X-ray images for medical diagnosis.
Download or read book Small Animal SPECT Imaging written by Matthew A. Kupinski and published by Springer Science & Business Media. This book was released on 2007-05-27 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small-Animal SPECT Imaging is an edited work derived from the first workshop on Small-Animal SPECT Imaging held January 14-16, 2004 at the University of Arizona, Tucson, AZ, USA. The overall goal of the meeting and therefore this volume is to promote information exchange and collaboration between the research groups developing systems for small-animal applications. Topics include the biomedical significance of small-animal imaging, an overview of detector technologies including scintillation cameras and semi-conductor arrays, imager design and data acquisition systems, animal handling and anesthesia issues, objective assessment of image quality, and system modeling and reconstruction algorithms.
Download or read book Neutron Personnel Dosimetry written by Robert B. Schwartz and published by . This book was released on 1987 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Neutron Physics written by Karl-Heinrich Beckurts and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based upon a series of lectures I have occasionally given at the University of Gottingen since 1951. They were meant to introduce the students of experimental physics to the work in a neutron physics laboratory dealing with the problem of measuring neutron flux, diffusion length, Fermi age, effective neutron temperature, absorption cross sections and similar problems. Moreover, these lectures were intended to prepare the students for a subsequent lecture covering the physics of nuclear reactors. The original character of this series of lectures has been retained in the book. It is intended for use by students as well as anyone desiring to work on neutron physics measurements. The first half mainly covers the theory of neutron fields, i. e. essentially diffusion and slowing down theory. The second half is largely concerned with measurements in neutron fields. The appendix contains information and data which, in our experience, are frequently required in a neutron laboratory. The field of nuclear physics proper is briefly touched upon in the first two chapters, but only to the extent necessary for the understanding of the following chapters. The multitude of applications of neutron radiation has not been covered. The conclusion of this manuscript coincided with the end of my long period of activity with the Max-Planck-Institut fur Physik at Gottingen. To Professor HEISENBERG lowe thanks for his advice and suggestions for many of the subjects treated here.
Download or read book Multifunctional Oxide Heterostructures written by Evgeny Y. Tsymbal and published by OUP Oxford. This book was released on 2012-08-30 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the rapidly developing field of oxide thin-films and heterostructures. Oxide materials combined with atomic-scale precision in a heterostructure exhibit an abundance of macroscopic physical properties involving the strong coupling between the electronic, spin, and structural degrees of freedom, and the interplay between magnetism, ferroelectricity, and conductivity. Recent advances in thin-film deposition and characterization techniques made possible the experimental realization of such oxide heterostructures, promising novel functionalities and device concepts. The book consists of chapters on some of the key innovations in the field over recent years, including strongly correlated oxide heterostructures, magnetoelectric coupling and multiferroic materials, thermoelectric phenomena, and two-dimensional electron gases at oxide interfaces. The book covers the core principles, describes experimental approaches to fabricate and characterize oxide heterostructures, demonstrates new functional properties of these materials, and provides an overview of novel applications.
Download or read book Adaptronics and Smart Structures written by Hartmut Janocha and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adaptronics is the term encompassing technical fields that have become known internationally under the names "smart materials", "intelligent structures", and "smart structures". Adaptronics contributes to the optimisation of systems and products. It bridges the gap between material and system or product, and incorporates the search for multi-functional materials and elements and their integration in systems or structures. The authors of this book have taken on the task of displaying the current state of the art in this fascinating field. The system components, actuators, sensors and controllers, technical fundamentals, materials, design rules and practical solutions are all described. Selected sample applications are also presented and current development trends are demonstrated.
Download or read book Experimental Techniques in Nuclear and Particle Physics written by Stefaan Tavernier and published by Springer Science & Business Media. This book was released on 2010-02-06 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: I have been teaching courses on experimental techniques in nuclear and particle physics to master students in physics and in engineering for many years. This book grew out of the lecture notes I made for these students. The physics and engineering students have rather different expectations of what such a course should be like. I hope that I have nevertheless managed to write a book that can satisfy the needs of these different target audiences. The lectures themselves, of course, need to be adapted to the needs of each group of students. An engineering student will not qu- tion a statement like “the velocity of the electrons in atoms is ?1% of the velocity of light”, a physics student will. Regarding units, I have written factors h and c explicitly in all equations throughout the book. For physics students it would be preferable to use the convention that is common in physics and omit these constants in the equations, but that would probably be confusing for the engineering students. Physics students tend to be more interested in theoretical physics courses. However, physics is an experimental science and physics students should und- stand how experiments work, and be able to make experiments work. This is an open access book.
