Download or read book Simulation and Modeling of Emerging Devices written by Brinda Bhowmick and published by Cambridge Scholars Publishing. This book was released on 2023-05-10 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the physical principles, modelling, fabrication and applications of Tunnel Field Effect Transistors (TFETs) and Fin Field Effect Transistors (FinFETs). This is intended to act as a reference for undergraduate, postgraduate and research scholars belonging to backgrounds of Applied Physics, Electrical and Electronics Engineering and Material Science. Of paramount importance is the need to understand the simulation aspects of these devices, the validity of mathematical models, basics on fabrication and details of applications of these nanoscale devices. The presentation of the book assumes that the reader has fundamental concepts of semiconductor device physics and electronic circuits. A course such as the one this book is intended to accompany and motivate both students and scholars to get involved in the research on TFETs and FinFETs. Further, this book can act as a reference for device engineers and scientists who need to get updated information on device and technological developments.

Download or read book Introduction to Device Modeling and Circuit Simulation written by Tor A. Fjeldly and published by Wiley-Interscience. This book was released on 1998 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a useful reference for practicing electrical engineers as well as a textbook for a junior/senior or graduate level course in electrical engineering. The authors combine two subjects: device modeling and circuit simulation - by providing a large number of well-prepared examples of circuit simulations immediately following the description of many device models.

Download or read book Nanoscale Transistors written by Mark Lundstrom and published by Springer Science & Business Media. This book was released on 2006-06-18 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: To push MOSFETs to their scaling limits and to explore devices that may complement or even replace them at molecular scale, a clear understanding of device physics at nanometer scale is necessary. Nanoscale Transistors provides a description on the recent development of theory, modeling, and simulation of nanotransistors for electrical engineers, physicists, and chemists working on nanoscale devices. Simple physical pictures and semi-analytical models, which were validated by detailed numerical simulations, are provided for both evolutionary and revolutionary nanotransistors. After basic concepts are reviewed, the text summarizes the essentials of traditional semiconductor devices, digital circuits, and systems to supply a baseline against which new devices can be assessed. A nontraditional view of the MOSFET using concepts that are valid at nanoscale is developed and then applied to nanotube FET as an example of how to extend the concepts to revolutionary nanotransistors. This practical guide then explore the limits of devices by discussing conduction in single molecules

Download or read book Simulation of Semiconductor Devices and Processes written by Heiner Ryssel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: SISDEP ’95 provides an international forum for the presentation of state-of-the-art research and development results in the area of numerical process and device simulation. Continuously shrinking device dimensions, the use of new materials, and advanced processing steps in the manufacturing of semiconductor devices require new and improved software. The trend towards increasing complexity in structures and process technology demands advanced models describing all basic effects and sophisticated two and three dimensional tools for almost arbitrarily designed geometries. The book contains the latest results obtained by scientists from more than 20 countries on process simulation and modeling, simulation of process equipment, device modeling and simulation of novel devices, power semiconductors, and sensors, on device simulation and parameter extraction for circuit models, practical application of simulation, numerical methods, and software.

Download or read book Nano Interconnects written by Afreen Khursheed and published by CRC Press. This book was released on 2021-12-23 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook comprehensively covers on-chip interconnect dimension and application of carbon nanomaterials for modeling VLSI interconnect and buffer circuits. It provides analysis of ultra-low power high speed nano-interconnects based on different facets such as material modeling, circuit modeling and the adoption of repeater insertion strategies and measurement techniques. It covers important topics including on-chip interconnects, interconnect modeling, electrical impedance modeling of on-chip interconnects, modeling of repeater buffer and variability analysis. Pedagogical features including solved problems and unsolved exercises are interspersed throughout the text for better understanding. Aimed at senior undergraduate and graduate students in the field of electrical engineering, electronics and communications engineering for courses on Advanced VLSI Interconnects/Advanced VLSI Design/VLSI Interconnects/VLSI Design Automation and Techniques, this book: Provides comprehensive coverage of fundamental concepts related to nanotube transistors and interconnects. Discusses properties and performance of practical nanotube devices and related applications. Covers physical and electrical phenomena of carbon nanotubes, as well as applications enabled by this nanotechnology. Discusses the structure, properties, and characteristics of graphene-based on-chip interconnect. Examines interconnect power and interconnect delay issues arising due to downscaling of device size.

Download or read book NASA Space Technology Roadmaps and Priorities written by National Research Council and published by National Academies Press. This book was released on 2012-06-07 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: NASA's Office of the Chief Technologist (OCT) has begun to rebuild the advanced space technology program in the agency with plans laid out in 14 draft technology roadmaps. It has been years since NASA has had a vigorous, broad-based program in advanced space technology development and its technology base has been largely depleted. However, success in executing future NASA space missions will depend on advanced technology developments that should already be underway. Reaching out to involve the external technical community, the National Research Council (NRC) considered the 14 draft technology roadmaps prepared by OCT and ranked the top technical challenges and highest priority technologies that NASA should emphasize in the next 5 years. This report provides specific guidance and recommendations on how the effectiveness of the technology development program managed by OCT can be enhanced in the face of scarce resources.

Download or read book Simulation of Semiconductor Devices and Processes written by Siegfried Selberherr and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "Fifth International Conference on Simulation of Semiconductor Devices and Processes" (SISDEP 93) continues a series of conferences which was initiated in 1984 by K. Board and D. R. J. Owen at the University College of Wales, Swansea, where it took place a second time in 1986. Its organization was succeeded by G. Baccarani and M. Rudan at the University of Bologna in 1988, and W. Fichtner and D. Aemmer at the Federal Institute of Technology in Zurich in 1991. This year the conference is held at the Technical University of Vienna, Austria, September 7 - 9, 1993. This conference shall provide an international forum for the presentation of out standing research and development results in the area of numerical process and de vice simulation. The miniaturization of today's semiconductor devices, the usage of new materials and advanced process steps in the development of new semiconduc tor technologies suggests the design of new computer programs. This trend towards more complex structures and increasingly sophisticated processes demands advanced simulators, such as fully three-dimensional tools for almost arbitrarily complicated geometries. With the increasing need for better models and improved understand ing of physical effects, the Conference on Simulation of Semiconductor Devices and Processes brings together the simulation community and the process- and device en gineers who need reliable numerical simulation tools for characterization, prediction, and development.

Download or read book Information Systems and the Environment written by National Academy of Engineering and published by National Academies Press. This book was released on 2001-09-13 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information technology is a powerful tool for meeting environmental objectives and promoting sustainable development. This collection of papers by leaders in industry, government, and academia explores how information technology can improve environmental performance by individual firms, collaborations among firms, and collaborations among firms, government agencies, and academia. Information systems can also be used by nonprofit organizations and the government to inform the public about broad environmental issues and environmental conditions in their neighborhoods. Several papers address the challenges to information management posed by the explosive increase in information and knowledge about environmental issues and potential solutions, including determining what information is environmentally relevant and how it can be used in decision making. In addition, case studies are described and show how industry is using information systems to ensure sustainable development and meet environmental standards. The book also includes examples from the public sector showing how governments use information knowledge systems to disseminate "best practices" beyond big firms to small businesses, and from the world of the Internet showing how knowledge is shared among environmental advocates and the general public.

Download or read book Junctionless Field Effect Transistors written by Shubham Sahay and published by John Wiley & Sons. This book was released on 2019-01-28 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive one-volume reference on current JLFET methods, techniques, and research Advancements in transistor technology have driven the modern smart-device revolution—many cell phones, watches, home appliances, and numerous other devices of everyday usage now surpass the performance of the room-filling supercomputers of the past. Electronic devices are continuing to become more mobile, powerful, and versatile in this era of internet-of-things (IoT) due in large part to the scaling of metal-oxide semiconductor field-effect transistors (MOSFETs). Incessant scaling of the conventional MOSFETs to cater to consumer needs without incurring performance degradation requires costly and complex fabrication process owing to the presence of metallurgical junctions. Unlike conventional MOSFETs, junctionless field-effect transistors (JLFETs) contain no metallurgical junctions, so they are simpler to process and less costly to manufacture.JLFETs utilize a gated semiconductor film to control its resistance and the current flowing through it. Junctionless Field-Effect Transistors: Design, Modeling, and Simulation is an inclusive, one-stop referenceon the study and research on JLFETs This timely book covers the fundamental physics underlying JLFET operation, emerging architectures, modeling and simulation methods, comparative analyses of JLFET performance metrics, and several other interesting facts related to JLFETs. A calibrated simulation framework, including guidance on SentaurusTCAD software, enables researchers to investigate JLFETs, develop new architectures, and improve performance. This valuable resource: Addresses the design and architecture challenges faced by JLFET as a replacement for MOSFET Examines various approaches for analytical and compact modeling of JLFETs in circuit design and simulation Explains how to use Technology Computer-Aided Design software (TCAD) to produce numerical simulations of JLFETs Suggests research directions and potential applications of JLFETs Junctionless Field-Effect Transistors: Design, Modeling, and Simulation is an essential resource for CMOS device design researchers and advanced students in the field of physics and semiconductor devices.

Download or read book Silicon and Beyond written by Michael Shur and published by World Scientific. This book was released on 2000 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: The steady downscaling of device-feature size combined with a rapid increase in circuit complexity as well as the introduction of new device concepts based on non-silicon-material systems poses great challenges for device and circuit designers. One of the major tasks is the development of new and improved device models needed for accurate device and circuit design. Another task is the development of new circuit-simulation tools to handle very large and complex circuits. This book addresses both these issues with up-to-date reviews written by leading experts in the field. The first three chapters of the book discuss advanced device models both for existing technologies and for new, emerging technologies. Among the topics covered are models for MOSFETs, thin-film transitors (TFTs), and compound semiconductor devices, including GaAs HEMTs and HFETs, heterodimensional devices, quantum-tunneling devices, as well as wide-bandgap devices. Chapters 4 and 5 discuss advanced circuit simulators that hold promise for,handling circuits of much higher complexity than what is possible for typical state-of-the-art circuit simulators today.

Download or read book Nonlinear Circuit Simulation and Modeling written by José Carlos Pedro and published by Cambridge University Press. This book was released on 2018-06-14 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical, tutorial guide to the nonlinear methods and techniques needed to design real-world microwave circuits.

Download or read book Computational Modeling and Simulation of Advanced Wireless Communication Systems written by Agbotiname Lucky Imoize and published by CRC Press. This book was released on 2024-08-20 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers the exploitation of computational models for effectively developing and managing large-scale wireless communication systems. The goal is to create and establish computational models for seamless human interaction and efficient decision-making in beyond 5G wireless systems. Computational Modeling and Simulation of Advanced Wireless Communication Systems looks to create and establish computational models for seamless human interaction and efficient decision-making in the beyond 5G wireless systems. This book presents the design and development of several computational modeling techniques and their applications in wireless communication systems. It examines shortcomings and limitations of the existing computational models and offers solutions to revamp the traditional architecture toward addressing the vast network issues in wireless systems. The book addresses the need to design efficient computational and simulation models to address several issues in wireless communication systems, such as interference, pathloss, delay, traffic outage, and so forth. It discusses how theoretical, mathematical, and experimental results are integrated for optimal system performance to enhance the quality of service for mobile subscribers. Further, the book is intended for industry and academic researchers, scientists, and engineers in the fields of wireless communications and ICTs. It is structured to present a practical guide to wireless communication engineers, IT practitioners, researchers, students, and other professionals.

Download or read book Research Challenges in Modeling and Simulation for Engineering Complex Systems written by Richard Fujimoto and published by Springer. This book was released on 2017-08-18 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: This illuminating text/reference presents a review of the key aspects of the modeling and simulation (M&S) life cycle, and examines the challenges of M&S in different application areas. The authoritative work offers valuable perspectives on the future of research in M&S, and its role in engineering complex systems. Topics and features: reviews the challenges of M&S for urban infrastructure, healthcare delivery, automated vehicle manufacturing, deep space missions, and acquisitions enterprise; outlines research issues relating to conceptual modeling, covering the development of explicit and unambiguous models, communication and decision-making, and architecture and services; considers key computational challenges in the execution of simulation models, in order to best exploit emerging computing platforms and technologies; examines efforts to understand and manage uncertainty inherent in M&S processes, and how these can be unified under a consistent theoretical and philosophical foundation; discusses the reuse of models and simulations to accelerate the simulation model development process. This thought-provoking volume offers important insights for all researchers involved in modeling and simulation across the full spectrum of disciplines and applications, defining a common research agenda to support the entire M&S research community.

Download or read book Simulation of Semiconductor Processes and Devices 2007 written by Tibor Grasser and published by Springer Science & Business Media. This book was released on 2007-09-18 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "Twelfth International Conference on Simulation of Semiconductor Processes and Devices" (SISPAD 2007) continues a long series of conferences and is held in September 2007 at the TU Wien, Vienna, Austria. The conference is the leading forum for Technology Computer-Aided Design (TCAD) held alternatingly in the United States, Japan, and Europe. The first SISPAD conference took place in Tokyo in 1996 as the successor to three preceding conferences NUPAD, VPAD, and SISDEP. With its longstanding history SISPAD provides a world-wide forum for the presentaƯ tion and discussion of outstanding recent advances and developments in the field of numerical process and device simulation. Driven by the ongoing miniaturization in semiconductor fabrication technology, the variety of topics discussed at this meeting reflects the ever-growing complexity of the subject. Apart from the classic topics like process, device, and interconnect simulation, mesh generation, a broad specƯ trum of numerical issues, and compact modeling, new simulation approaches like atomistic and first-principles methods have emerged as important fields of research and are currently making their way into standard TCAD suites

Download or read book Mosfet Modeling For Vlsi Simulation Theory And Practice written by Narain Arora and published by World Scientific. This book was released on 2007-02-14 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: A reprint of the classic text, this book popularized compact modeling of electronic and semiconductor devices and components for college and graduate-school classrooms, and manufacturing engineering, over a decade ago. The first comprehensive book on MOS transistor compact modeling, it was the most cited among similar books in the area and remains the most frequently cited today. The coverage is device-physics based and continues to be relevant to the latest advances in MOS transistor modeling. This is also the only book that discusses in detail how to measure device model parameters required for circuit simulations.The book deals with the MOS Field Effect Transistor (MOSFET) models that are derived from basic semiconductor theory. Various models are developed, ranging from simple to more sophisticated models that take into account new physical effects observed in submicron transistors used in today's (1993) MOS VLSI technology. The assumptions used to arrive at the models are emphasized so that the accuracy of the models in describing the device characteristics are clearly understood. Due to the importance of designing reliable circuits, device reliability models are also covered. Understanding these models is essential when designing circuits for state-of-the-art MOS ICs.

Download or read book Computational Models in Engineering written by Konstantin Volkov and published by BoD – Books on Demand. This book was released on 2020-03-11 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: The accurate prediction of multi-physical and multi-scale physical/chemical/mechanical processes in engineering remains a challenging problem despite considerable work in this area and the acceptance of finite element analysis and computational fluid dynamics as design tools. This book intends to provide the reader with an overview of the latest developments in computational techniques used in various engineering disciplines. The book includes leading-edge scientific contributions of computational and applied mathematics, computer science and engineering focusing on the modelling and simulation of complex engineering systems and multi-physical/multi-scale engineering problems. The following topics are covered: numerical analysis and algorithms, software development, coupled analysis, multi-criteria optimization as they applied to all kinds of applied and emerging problems in energy systems, additive manufacturing, propulsion systems, and thermal engineering.

Download or read book Security Opportunities in Nano Devices and Emerging Technologies written by Mark Tehranipoor and published by CRC Press. This book was released on 2017-11-22 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research community lacks both the capability to explain the effectiveness of existing techniques and the metrics to predict the security properties and vulnerabilities of the next generation of nano-devices and systems. This book provides in-depth viewpoints on security issues and explains how nano devices and their unique properties can address the opportunities and challenges of the security community, manufacturers, system integrators, and end users. This book elevates security as a fundamental design parameter, transforming the way new nano-devices are developed. Part 1 focuses on nano devices and building security primitives. Part 2 focuses on emerging technologies and integrations.