Download or read book Simplified contact and gap conductance models for wavy pressure tube surfaces written by J. W. Devaal and published by . This book was released on 1985 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ridge-like waviness that forms on pressure tube surfaces during high temperature ballooning is idealized as a sinusoidal waveform, and a simplified model for predicting the thermal conductance when the pressure tube contacts its calandria tube is presented. the calandria tube is modelled as a smooth surface, and the extent of contact between these two surfaces is determined by either elastic or plastic deformation of the surface material near the waveform crests. once the width of the contact strips is known, thermal models are applied to this geometry to determine the contact, gap, and radiative components of the total joint conductance. the work described in this report was funded by the cog - candev program: work package no. 482.
Download or read book A gap conductance model for wavy surface contact in concentric tubes written by M. H. Schankula and published by . This book was released on 1987 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes the standing start tests (1198 to 1257) conducted in november, 1984 at westinghouse canada inc. under a contract jointly funded by atomic energy of canada limited, research company and ontario hydro. the objective of the test program is to provide experimental data to be used for modelling and verification of computer codes. the specific objectives were to investigate channel behaviour prior to channel venting, channel level response, and end fitting temperature distribution prior to venting under no-injection standing start conditions. sixty (60) tests were performed in the cold water injection test facility with a 6 m single channel in the double break configuration. a detailed description of the test facility, instrumentation and data acquisition system is given in reference [1].
Download or read book Spacecraft Thermal Control Handbook written by David G. Gilmore and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation This is a revised and updated of (1994) and has been expanded to discuss interplanetary spacecraft as well as Earth- orbiting satellites. The work is presented as a compendium of corporate knowledge in the field of thermal control of uncrewed spacecraft and was written for thermal engineers of a range of experience levels. After discussing general issues and historical design approaches chapters examine current thermal control hardware, the thermal design and testing process, and emerging thermal technologies. Annotation c. Book News, Inc., Portland, OR (booknews.com).
Download or read book Numerical Methods in Contact Mechanics written by Vladislav A. Yastrebov and published by John Wiley & Sons. This book was released on 2013-02-13 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational contact mechanics is a broad topic which brings together algorithmic, geometrical, optimization and numerical aspects for a robust, fast and accurate treatment of contact problems. This book covers all the basic ingredients of contact and computational contact mechanics: from efficient contact detection algorithms and classical optimization methods to new developments in contact kinematics and resolution schemes for both sequential and parallel computer architectures. The book is self-contained and intended for people working on the implementation and improvement of contact algorithms in a finite element software. Using a new tensor algebra, the authors introduce some original notions in contact kinematics and extend the classical formulation of contact elements. Some classical and new resolution methods for contact problems and associated ready-to-implement expressions are provided. Contents: 1. Introduction to Computational Contact. 2. Geometry in Contact Mechanics. 3. Contact Detection. 4. Formulation of Contact Problems. 5. Numerical Procedures. 6. Numerical Examples. About the Authors Vladislav A. Yastrebov is a postdoctoral-fellow in Computational Solid Mechanics at MINES ParisTech in France. His work in computational contact mechanics was recognized by the CSMA award and by the Prix Paul Caseau of the French Academy of Technology and Electricité de France.
Download or read book Conference Papers Index written by and published by . This book was released on 1987 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monthly. Papers presented at recent meeting held all over the world by scientific, technical, engineering and medical groups. Sources are meeting programs and abstract publications, as well as questionnaires. Arranged under 17 subject sections, 7 of direct interest to the life scientist. Full programs of meetings listed under sections. Entry gives citation number, paper title, name, mailing address, and any ordering number assigned. Quarterly and annual indexes to subjects, authors, and programs (not available in monthly issues).
Download or read book Thermal Contact Conductance written by Chakravarti V. Madhusudana and published by Springer Science & Business Media. This book was released on 2013-09-24 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work covers both theoretical and practical aspects of thermal contact conductance. The theoretical discussion focuses on heat transfer through spots, joints, and surfaces, as well as the role of interstitial materials (both planned and inadvertent). The practical discussion includes formulae and data that can be used in designing heat-transfer equipment for a variety of joints, including special geometries and configurations. All of the material has been updated to reflect the latest advances in the field.
Download or read book Rules of Thumb for Mechanical Engineers written by J. Edward Pope and published by Gulf Professional Publishing. This book was released on 1997 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluids -- Heat transfer -- Thermodynamics -- Mechanical seals -- Pumps and compressors -- Drivers -- Gears -- Bearings -- Piping and pressure vessels -- Tribology -- Vibration -- Materials -- Stress and strain -- Fatigue -- Instrumentation -- Engineering economics.
Download or read book Tribology for Scientists and Engineers written by Pradeep L. Menezes and published by Springer Science & Business Media. This book was released on 2013-12-04 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes available tribology technologies and introdces a comprehensive overview of tribology. General, up-to-date knowledge on how tribology is approached in various related areas of research, both experimental and computational is provided.
Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. A practical guide to the selection, design and optimization of extrusion processes and equipment Designed to improve production efficiency and product quality Focuses on practical fault analysis and troubleshooting techniques
Download or read book Nuclear Regulatory Commission Issuances written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1979 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Heat Exchanger Design written by Ramesh K. Shah and published by John Wiley & Sons. This book was released on 2003-08-11 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive and unique source integrates the material usually distributed among a half a dozen sources. * Presents a unified approach to modeling of new designs and develops the skills for complex engineering analysis. * Provides industrial insight to the applications of the basic theory developed.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1995 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intermolecular and Surface Forces written by Jacob N. Israelachvili and published by Academic Press. This book was released on 2011-07-22 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intermolecular and Surface Forces describes the role of various intermolecular and interparticle forces in determining the properties of simple systems such as gases, liquids and solids, with a special focus on more complex colloidal, polymeric and biological systems. The book provides a thorough foundation in theories and concepts of intermolecular forces, allowing researchers and students to recognize which forces are important in any particular system, as well as how to control these forces. This third edition is expanded into three sections and contains five new chapters over the previous edition. Starts from the basics and builds up to more complex systems Covers all aspects of intermolecular and interparticle forces both at the fundamental and applied levels Multidisciplinary approach: bringing together and unifying phenomena from different fields This new edition has an expanded Part III and new chapters on non-equilibrium (dynamic) interactions, and tribology (friction forces)
Download or read book Thermal Design written by H. S. Lee and published by John Wiley & Sons. This book was released on 2010-11-17 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Design: Heat Sinks, Thermoelectrics, Heat Pipes, Compact Heat Exchangers, and Solar Cells, Second Edition, is a significantly updated new edition which now includes a chapter on thermoelectrics It covers thermal devices such as heat sinks, thermoelectric generators and coolers, heat pipes, and heat exchangers as design components in larger systems. These devices are becoming increasingly important and fundamental in thermal design across such diverse areas as microelectronic cooling, green or thermal energy conversion, and thermal control and management in space. The underlying concepts in this book cover the understanding of the physical mechanisms of the thermal devices with the essential formulas and detailed derivations, and also the design of the thermal devices in conjunction with mathematical modeling, graphical optimization, and occasionally computational-fluid-dynamic (CFD) simulation. This new edition includes more examples, problems and tutorials, and a solutions manual is available on a companion website.
Download or read book Principles of Environmental Physics written by John Monteith and published by Butterworth-Heinemann. This book was released on 1990-02-15 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly revised and up-dated edition of a highly successful textbook.
Download or read book An Introduction to Reservoir Simulation Using MATLAB GNU Octave written by Knut-Andreas Lie and published by Cambridge University Press. This book was released on 2019-08-08 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents numerical methods for reservoir simulation, with efficient implementation and examples using widely-used online open-source code, for researchers, professionals and advanced students. This title is also available as Open Access on Cambridge Core.
Download or read book Thermal Radiation Heat Transfer written by Robert Siegel and published by Hemisphere Pub. This book was released on 2002-01-01 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
