Download or read book Silicon Nanowires for Chemical Sensing PH Measurement and Ion Species Identificaiton in Solution written by Maria E. Pace and published by . This book was released on 2015 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract Silicon Nanowires for Chemical Sensing, pH Measurement and Ion Species Identification in Solution by Maria E. Pace Doctor of Philosophy in Applied Science and Technology University of California, Berkeley Professor Tarek I. Zohdi, Co-Chair Dean Albert P. Pisano, Co-Chair In situ measurement of true pH would be useful in many applications. True pH is the negative log of the Hydrogen ion concentration, however, measurement of this is elusive in many practical applications due to the presence of interfering ions, such as sodium and potassium. Monitoring true pH in surgical procedures, for instance, would be very useful, however, interfering ions necessitate preprocessing of the blood and laboratory analysis making it not in situ, and not in real time. This work presents a measurement system capable of measuring true pH in the presence of interfering ions using nanowire sensors and electrospectroscopy. This system is also able to operate as a chemical sensor by discriminating between different ionic species in solution and can separately measure concentrations of other ionic species for leak detection and chemical identification. Nanowire sensors offer many advantages such as small size, low power, and inexpensive fabrication. These advantages allow real time, in situ monitoring in many applications. In addition, silicon nanowires are integrated as a semiconductor pH sensor and species identification chip. Using electrospectroscopy, ions drift in the fluid at different times allowing the nanowire to make measurements of different species present in the fluid. To accomplish this, various modes of operation including “the time of flight” have been developed to maximize ion identification and species concentration measurement. The advantages of these sensors include high sensitivity at low concentrations, 80% sensitivity at 1e-6 M with ion species identification and measurement of true pH. Depending on the species of interest, a particular mode of operation can be employed to achieve desirable results. Advantages of these modes of operation are isolation of hydrogen ions from other species including sodium to measure true pH in real time and a method for deconvolving the species both in temporal and spatial maps. Additionally, a method for electrically cleaning the nanowires sensors and a method to re-zero the nanowires has been explored allowing more accurate measurement of the species and true pH. A novel top down fabrication process has been developed which reduces the line edge roughness of the nanowire for more reproducible sensors, reduces dielectric pin hole density for minimal sensor drift over time and reduces parasitic resistance for higher ion sensitivity. This novel fabrication process is truly CMOS compatible allowing more compatibility with other electronics. The SiNW is covered by thin film which protects SiNW from liquid penetration and can also work as ion sensitive film or functionalized surface. As a fabrication simplicity, the entire structure above can be built on a standard SOI (Silicon on Insulator) wafer. Experimental results have shown a linear relation between resistance change in the nanowire and pH in the fluid.
Download or read book Nanowire Field Effect Transistors Principles and Applications written by Dae Mann Kim and published by Springer Science & Business Media. This book was released on 2013-10-23 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Nanowire Field Effect Transistor: Basic Principles and Applications” places an emphasis on the application aspects of nanowire field effect transistors (NWFET). Device physics and electronics are discussed in a compact manner, together with the p-n junction diode and MOSFET, the former as an essential element in NWFET and the latter as a general background of the FET. During this discussion, the photo-diode, solar cell, LED, LD, DRAM, flash EEPROM and sensors are highlighted to pave the way for similar applications of NWFET. Modeling is discussed in close analogy and comparison with MOSFETs. Contributors focus on processing, electrostatic discharge (ESD) and application of NWFET. This includes coverage of solar and memory cells, biological and chemical sensors, displays and atomic scale light emitting diodes. Appropriate for scientists and engineers interested in acquiring a working knowledge of NWFET as well as graduate students specializing in this subject.
Download or read book Selected Topics in Micro Nano robotics for Biomedical Applications written by Yi Guo and published by Springer Science & Business Media. This book was released on 2012-09-25 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro/Nano-robotics for Biomedical Applications features a system approach and incorporates modern methodologies in autonomous mobile robots for programmable and controllable micro/nano-robots aiming at biomedical applications. The book provides chapters of instructional materials in micro/nanorobotics for biomedical applications. The book features lecture units on micro/nanorobot components and techniques, including sensors, actuator, power supply, and micro/nano-fabrication and assembly. It also contains case studies on using micro/nano-robots in biomedical environments and in biomedicine, as well as a design example to conceptually develop a Vitamin-pill sized robot to enter human’s gastrointestinal tract. Laboratory modules to teach robot navigation and cooperation methods suitable to biomedical applications will be also provided based on existing simulation and robot platforms.
Download or read book Advances in Chemical Sensors written by Wen Wang and published by BoD – Books on Demand. This book was released on 2012-01-20 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chemical sensor plays an essential role in the fields of environmental conservation and monitoring, disaster and disease prevention, and industrial analysis. A typical chemical sensor is a device that transforms chemical information in a selective and reversible way, ranging from the concentration of a specific sample component to total composition analysis, into an analytically useful signal. Much research work has been performed to achieve a chemical sensor with such excellent qualities as quick response, low cost, small size, superior sensitivity, good reversibility and selectivity, and excellent detection limit. This book introduces the latest advances on chemical sensors. It consists of 15 chapters composed by the researchers active in the field of chemical sensors, and is divided into 5 sections according to the classification following the principles of signal transducer. This collection of up-to-date information and the latest research progress on chemical sensor will provide valuable references and learning materials for all those working in the field of chemical sensors.
Download or read book Biosensors written by Anthony P. F. Turner and published by Oxford University Press, USA. This book was released on 1989 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive book to be published in this field. It has many contributors, chosen to reflect the spread of disciplines from which the new techniques have emerged.
Download or read book Nanowire Field Effect Transistor FET written by Antonio García-Loureiro and published by . This book was released on 2021 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last few years, the leading semiconductor industries have introduced multi-gate non-planar transistors into their core business. These are being applied in memories and in logical integrated circuits to achieve better integration on the chip, increased performance, and reduced energy consumption. Intense research is underway to develop these devices further and to address their limitations, in order to continue transistor scaling while further improving performance. This Special Issue looks at recent developments in the field of nanowire field-effect transistors (NW-FETs), covering different aspects of the technology, physics, and modelling of these nanoscale devices.
Download or read book Nanotechnology Enabled Sensors written by Kourosh Kalantar-zadeh and published by Springer Science & Business Media. This book was released on 2007-09-19 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology provides tools for creating functional materials, devices, and systems by controlling materials at the atomic and molecular scales and making use of novel properties and phenomena. Nanotechnology-enabled sensors find applications in several fields such as health and safety, medicine, process control and diagnostics. This book provides the reader with information on how nanotechnology enabled sensors are currently being used and how they will be used in the future in such diverse fields as communications, building and facilities, medicine, safety, and security, including both homeland defense and military operations.
Download or read book Electrochemical Biosensors written by Serge Cosnier and published by CRC Press. This book was released on 2015-01-26 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since four decades, rapid detection and monitoring in clinical and food diagnostics and in environmental and biodefense have paved the way for the elaboration of electrochemical biosensors. Thanks to their adaptability, ease of use in relatively complex samples, and their portability, electrochemical biosensors now are one of the mainstays of analy
Download or read book Combinatorial Methods for Chemical and Biological Sensors written by Radislav A. Potyrailo and published by Springer Science & Business Media. This book was released on 2009-03-21 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical sensors are in high demand for applications as varied as water pollution detection, medical diagnostics, and battlefield air analysis. Designing the next generation of sensors requires an interdisciplinary approach. The book provides a critical analysis of new opportunities in sensor materials research that have been opened up with the use of combinatorial and high-throughput technologies, with emphasis on experimental techniques. For a view of component selection with a more computational perspective, readers may refer to the complementary volume of Integrated Analytical Systems edited by M. Ryan et al., entitled “Computational Methods for Sensor Material Selection”.
Download or read book Nanobiosensors written by Alexandru Grumezescu and published by Academic Press. This book was released on 2016-09-28 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanobiosensors: Nanotechnology in the Agri-Food Industry, Volume 8, provides the latest information on the increasing demand for robust, rapid, inexpensive, and safe alternative technologies that monitor, test, and detect harmful or potentially dangerous foods. Due to their high sensitivity and selectivity, nanobiosensors have attracted attention for their use in monitoring not only biological contaminants in food, but also potential chemical and physical hazards. This book offers a broad overview regarding the current progress made in the field of nanosensors, including cutting-edge technological progress and the impact of these devices on the food industry. Special attention is given to the detection of microbial contaminants and harmful metabolotes, such as toxins and hormones, which have a great impact on both humans and animal health and feed. Includes the most up-to-date information on nanoparticles based biosensors and quantum dots for biological detection Provides application methods and techniques for research analysis for bacteriological detection and food testing Presents studies using analytical tools to improve food safety and quality analysis
Download or read book Chemical Sensors written by Peter Gründler and published by Springer Science & Business Media. This book was released on 2007-01-30 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research in the area of chemical and biochemical sensors and the development of respective applications is still growing rapidly. This book aims at instructing researcher and practitioners in both disciplines in a strictly systematic, interdisciplinary and practice-oriented way about the basic technology of chemical and biochemical sensors. This concise volume bridges the gap between the different "ways of thinking" in chemistry, physics and engineering. It provides a firm grounding for engineers, industrial and academic researcher in the field, for practitioners and novices as well as for advanced students.
Download or read book Silicon Nanowire Transistors written by Ahmet Bindal and published by Springer. This book was released on 2016-02-23 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the n and p-channel Silicon Nanowire Transistor (SNT) designs with single and dual-work functions, emphasizing low static and dynamic power consumption. The authors describe a process flow for fabrication and generate SPICE models for building various digital and analog circuits. These include an SRAM, a baseband spread spectrum transmitter, a neuron cell and a Field Programmable Gate Array (FPGA) platform in the digital domain, as well as high bandwidth single-stage and operational amplifiers, RF communication circuits in the analog domain, in order to show this technology’s true potential for the next generation VLSI.
Download or read book Nanowires written by Anqi Zhang and published by Springer. This book was released on 2016-07-26 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive summary of nanowire research in the past decade, from the nanowire synthesis, characterization, assembly, to the device applications. In particular, the developments of complex/modulated nanowire structures, the assembly of hierarchical nanowire arrays, and the applications in the fields of nanoelectronics, nanophotonics, quantum devices, nano-enabled energy, and nano-bio interfaces, are focused. Moreover, novel nanowire building blocks for the future/emerging nanoscience and nanotechnology are also discussed.Semiconducting nanowires represent one of the most interesting research directions in nanoscience and nanotechnology, with capabilities of realizing structural and functional complexity through rational design and synthesis. The exquisite control of chemical composition, morphology, structure, doping and assembly, as well as incorporation with other materials, offer a variety of nanoscale building blocks with unique properties.
Download or read book Nanowires written by Simas Rackauskas and published by BoD – Books on Demand. This book was released on 2019-04-10 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanowires are attracting wide scientific interest due to the unique properties associated with their one-dimensional geometry. Developments in the understanding of the fundamental principles of the nanowire growth mechanisms and mastering functionalization provide tools to control crystal structure, morphology, and the interactions at the material interface, and create characteristics that are superior to those of planar geometries. This book provides a comprehensive overview of the most important developments in the field of nanowires, starting from their synthesis, discussing properties, and finalizing with nanowire applications. The book consists of two parts: the first is devoted to the synthesis of nanowires and characterization, and the second investigates the properties of nanowires and their applications in future devices.
Download or read book Semiconductor Nanowires written by J Arbiol and published by Elsevier. This book was released on 2015-03-31 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor nanowires promise to provide the building blocks for a new generation of nanoscale electronic and optoelectronic devices. Semiconductor Nanowires: Materials, Synthesis, Characterization and Applications covers advanced materials for nanowires, the growth and synthesis of semiconductor nanowires—including methods such as solution growth, MOVPE, MBE, and self-organization. Characterizing the properties of semiconductor nanowires is covered in chapters describing studies using TEM, SPM, and Raman scattering. Applications of semiconductor nanowires are discussed in chapters focusing on solar cells, battery electrodes, sensors, optoelectronics and biology. Explores a selection of advanced materials for semiconductor nanowires Outlines key techniques for the property assessment and characterization of semiconductor nanowires Covers a broad range of applications across a number of fields
Download or read book Handbook of Chemical and Biological Sensors written by R.F Taylor and published by CRC Press. This book was released on 1996-01-01 with total page 1248 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Chemical and Biological Sensors focuses on the development of sensors to recognize substances rather than physical quantities. This fully inclusive book examines devices that use a biological sensing element to detect and measure chemical and biological species as well as those that use a synthetic element to achieve a similar result. A first port of call for anyone with a specific interest, question, or problem relating to this area, this comprehensive source of reference serves as a guide for practicing scientists and as a text for many graduate courses. It presents relevant physics to chemists, chemistry to materials scientists, materials science to electronic engineers, and fabrication technology to all of the above. In addition, the handbook is useful both to newcomers and to experienced researchers who wish to broaden their knowledge of the constituent disciplines of this wide-ranging field.
Download or read book Smart Sensor Systems written by Gerard Meijer and published by John Wiley & Sons. This book was released on 2014-04-02 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from an internationally-renowned group of experts, this book uses a multidisciplinary approach to review recent developments in the field of smart sensor systems, covering important system and design aspects. It examines topics over the whole range of sensor technology from the theory and constraints of basic elements, physics and electronics, up to the level of application-orientated issues. Developed as a complementary volume to ‘Smart Sensor Systems’ (Wiley 2008), which introduces the basics of smart sensor systems, this volume focuses on emerging sensing technologies and applications, including: State-of-the-art techniques for designing smart sensors and smart sensor systems, including measurement techniques at system level, such as dynamic error correction, calibration, self-calibration and trimming. Circuit design for sensor systems, such as the design of precision instrumentation amplifiers. Impedance sensors, and the associated measurement techniques and electronics, that measure electrical characteristics to derive physical and biomedical parameters, such as blood viscosity or growth of micro-organisms. Complete sensor systems-on-a-chip, such as CMOS optical imagers and microarrays for DNA detection, and the associated circuit and micro-fabrication techniques. Vibratory gyroscopes and the associated electronics, employing mechanical and electrical signal amplification to enable low-power angular-rate sensing. Implantable smart sensors for neural interfacing in bio-medical applications. Smart combinations of energy harvesters and energy-storage devices for autonomous wireless sensors. Smart Sensor Systems: Emerging Technologies and Applications will greatly benefit final-year undergraduate and postgraduate students in the areas of electrical, mechanical and chemical engineering, and physics. Professional engineers and researchers in the microelectronics industry, including microsystem developers, will also find this a thorough and useful volume.
