Download or read book Silicon Heterojunction Solar Cells Analysis and Basic Understanding written by Martin Bivour and published by . This book was released on 2017-03-29 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Silicon Heterojunction Solar Cells written by W.R. Fahrner and published by Trans Tech Publications Ltd. This book was released on 2006-08-15 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world of today must face up to two contradictory energy problems: on the one hand, there is the sharply growing consumer demand in countries such as China and India. On the other hand, natural resources are dwindling. Moreover, many of those countries which still possess substantial gas and oil supplies are politically unstable. As a result, renewable natural energy sources have received great attention. Among these, solar-cell technology is one of the most promising candidates. However, there still remains the problem of the manufacturing costs of such cells. Many attempts have been made to reduce the production costs of conventional solar cells (manufactured from monocrystalline silicon using diffusion methods) by instead using cheaper grades of silicon, and simpler pn-junction fabrication. That is the hero of this book; the heterojunction solar cell.
Download or read book Amorphous Silicon Crystalline Silicon Heterojunction Solar Cells written by Wolfgang Rainer Fahrner and published by Springer Science & Business Media. This book was released on 2013-04-23 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amorphous Silicon/Crystalline Silicon Solar Cells deals with some typical properties of heterojunction solar cells, such as their history, the properties and the challenges of the cells, some important measurement tools, some simulation programs and a brief survey of the state of the art, aiming to provide an initial framework in this field and serve as a ready reference for all those interested in the subject. This book helps to “fill in the blanks” on heterojunction solar cells. Readers will receive a comprehensive overview of the principles, structures, processing techniques and the current developmental states of the devices. Prof. Dr. Wolfgang R. Fahrner is a professor at the University of Hagen, Germany and Nanchang University, China.
Download or read book High Efficiency Crystalline Silicon Solar Cells written by Eun-Chel Cho and published by MDPI. This book was released on 2021-01-06 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is composed of 6 papers. The first paper reports a novel technique for the selective emitter formation by controlling the surface morphology of Si wafers. Selective emitter (SE) technology has attracted renewed attention in the Si solar cell industry to achieve an improved conversion efficiency of passivated-emitter rear-contact (PERC) cells. In the second paper, the temperature dependence of the parameters was compared through the PERC of the industrial-scale solar cells. As a result of their analysis, PERC cells showed different temperature dependence for the fill factor loss as temperatures rose. The third paper reports the effects of carrier selective front contact layer and defect state of hydrogenated amorphous silicon passivation layer/n-type crystalline silicon interface. The results demonstrated the effects of band offset determined by band bending at the interface of the passivation layer and carrier selective front contact layer. In addition, the nc-SiOx: H CSFC layer not only reduces parasitic absorption loss but also has a tunneling effect and field-effect passivation. The fourth paper reports excimer laser annealing of hydrogenated amorphous silicon film for TOPCon solar cell application. This paper analyzes the crystallization of a-Si:H via excimer laser annealing (ELA) and compared this process with conventional thermal annealing. The fifth paper reports the contact mechanism between Ag–Al and Si and the change in contact resistance (Rc) by varying the firing profile. Rc was measured by varying the belt speed and peak temperature of the fast-firing furnace. The sixth paper reports a silicon tandem heterojunction solar cell based on a ZnO/Cu2O subcell and a c-Si bottom subcell using electro-optical numerical modeling. The buffer layer affinity and mobility together with a low conduction band offset for the heterojunction are discussed, as well as spectral properties of the device model.
Download or read book Nanostructured Solar Cells written by Narottam Das and published by BoD – Books on Demand. This book was released on 2017-02-22 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured solar cells are very important in renewable energy sector as well as in environmental aspects, because it is environment friendly. The nano-grating structures (such as triangular or conical shaped) have a gradual change in refractive index which acts as a multilayer antireflective coating that is leading to reduced light reflection losses over broadband ranges of wavelength and angle of incidence. There are different types of losses in solar cells that always reduce the conversion efficiency, but the light reflection loss is the most important factor that decreases the conversion efficiency of solar cells significantly. The antireflective coating is an optical coating which is applied to the surface of lenses or any optical devices to reduce the light reflection losses. This coating assists for the light trapping capturing capacity or improves the efficiency of optical devices, such as lenses or solar cells. Hence, the multilayer antireflective coatings can reduce the light reflection losses and increases the conversion efficiency of nanostructured solar cells.
Download or read book Physics and Technology of Amorphous Crystalline Heterostructure Silicon Solar Cells written by Wilfried G. J. H. M. van Sark and published by Springer Science & Business Media. This book was released on 2011-11-16 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today’s solar cell multi-GW market is dominated by crystalline silicon (c-Si) wafer technology, however new cell concepts are entering the market. One very promising solar cell design to answer these needs is the silicon hetero-junction solar cell, of which the emitter and back surface field are basically produced by a low temperature growth of ultra-thin layers of amorphous silicon. In this design, amorphous silicon (a-Si:H) constitutes both „emitter“ and „base-contact/back surface field“ on both sides of a thin crystalline silicon wafer-base (c-Si) where the electrons and holes are photogenerated; at the same time, a-Si:H passivates the c-Si surface. Recently, cell efficiencies above 23% have been demonstrated for such solar cells. In this book, the editors present an overview of the state-of-the-art in physics and technology of amorphous-crystalline heterostructure silicon solar cells. The heterojunction concept is introduced, processes and resulting properties of the materials used in the cell and their heterointerfaces are discussed and characterization techniques and simulation tools are presented.
Download or read book Heterojunction Solar Cells a Si c Si written by Thomas Mueller and published by Logos Verlag Berlin GmbH. This book was released on 2009 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main focus of the present work is related to the optimization of heterojunction solar cells. The key roles in obtaining high efficient heterojunction solar cells are mainly the plasma enhanced chemical vapor deposition of very low defect layers, and the sufficient surface passivation of all interfaces. In heterojunction solar cells, the a-Si: H/c-Si hetero-interface is of significant importance, since the hetero-interface characteristics directly affect the junction properties and thus solar cell efficiency. In this work, the deposition and film properties of various hydrogenated amorphous silicon alloys, such as a-SiC: H, a-SiO_x: H, and muc-Si: H (standard a-Si: H is used as reference), are employed. Special attention is paid to (i) the front and back surface passivation of the bulk material by high-quality wide-gap amorphous silicon suboxides (a-SiO_x: H), and (ii) the influence of wide-gap high-quality a-Si- and muc-Si-based alloys for use as emitter and back-surface-
Download or read book Amorphous Silicon Crystalline Silicon Heterojunction Solar Cells written by Wolfgang Rainer Fahrner and published by . This book was released on 2013 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Solar Cells and Modules written by Arvind Shah and published by Springer Nature. This book was released on 2020-07-16 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive introduction to the field of photovoltaic (PV) solar cells and modules. In thirteen chapters, it addresses a wide range of topics including the spectrum of light received by PV devices, the basic functioning of a solar cell, and the physical factors limiting the efficiency of solar cells. It places particular emphasis on crystalline silicon solar cells and modules, which constitute today more than 90 % of all modules sold worldwide. Describing in great detail both the manufacturing process and resulting module performance, the book also touches on the newest developments in this sector, such as Tunnel Oxide Passivated Contact (TOPCON) and heterojunction modules, while dedicating a major chapter to general questions of module design and fabrication. Overall, it presents the essential theoretical and practical concepts of PV solar cells and modules in an easy-to-understand manner and discusses current challenges facing the global research and development community.
Download or read book High Efficiency Silicon Solar Cells written by Martin A. Green and published by Trans Tech Publications Ltd. This book was released on 1987-01-01 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The early chapters comprehensively review the optical and transport properties of silicon. Light trapping is described in detail. Limits on the efficiency of silicon cells are discussed as well as material requirements necessary to approach these limits. The status of current approaches to passifying surfaces, contacts and bulk regions is reviewed. The final section of the book describes the most practical approaches to the fabrication of high-efficiency cells capable of meeting the efficiency targets for both concentrated and non-concentrated sunlight, including a discussion of design and processing approaches for non-crystalline silicon.
Download or read book Crystalline Silicon Solar Cells written by Adolf Goetzberger and published by Wiley. This book was released on 1998-04-08 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: As environmental concerns escalate, solar power is increasingly seen as an attractive alternative energy source. Crystalline Silicon Solar Cells addresses the practical and theoretical issues fundamental to the viable conversion of sunlight into electricity. Written by three internationally renowned experts, this valuable reference profits from results and experience gained from research at the Fraunhofer Institute for Solar Energy Systems. Features include: Introduction to the principles of photovoltaics, providing a grounding in semiconductor physics for the novice reader Special emphasis on the methods of attaining high efficiency and thereby cost-effective solar power Examination of the physics, design and technology of crystalline silicon solar cells, in particular thin film cells Survey of a selection of alternative cell types equipping the reader with a complete overview Detailed description of measuring and analysis techniques to facilitate determining physical semiconductor and solar cell parameters Accessible to those with a basic knowledge of physics and mathematics, this is an excellent introductory book for students studying solid state and semiconductor physics. All those working in photovoltaic development and production will find Crystalline Silicon Solar Cells an indispensable resource.
Download or read book Advances in Computer Communication and Control written by Utpal Biswas and published by Springer. This book was released on 2019-02-14 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses the recent research trends in various sub-domains of computing, communication and control. It includes research papers presented at the First International Conference on Emerging Trends in Engineering and Science. Focusing on areas such as optimization techniques, game theory, supply chain, green computing, 5g networks, Internet of Things, social networks, power electronics and robotics, it is a useful resource for academics and researchers alike.
Download or read book Surface Passivation of Industrial Crystalline Silicon Solar Cells written by Joachim John and published by Institution of Engineering and Technology. This book was released on 2018-07-31 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This timely, comprehensive work on solar cell surface passivation will collect and convey the scientific and technological progress provided by universities, research institutes and companies to implement dielectric passivation layers into the solar cell manufacturing process for c-Si solar cells. With a focus on industrial manufacturing it will comprehensively cover all promising techniques and describe the process from material research to full production implementation of dielectric layers for silicon solar cell passivation.
Download or read book Materials Concepts for Solar Cells written by Thomas Dittrich and published by World Scientific Publishing Company. This book was released on 2018-01-30 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern challenge is for solar cell materials to enable the highest solar energy conversion efficiencies, at costs as low as possible, and at an energy balance as sustainable as necessary in the future. This textbook explains the principles, concepts and materials used in solar cells. It combines basic knowledge about solar cells and the demanded criteria for the materials with a comprehensive introduction into each of the four classes of materials for solar cells, i.e. solar cells based on crystalline silicon, epitaxial layer systems of III-V semiconductors, thin-film absorbers on foreign substrates, and nano-composite absorbers. In this sense, it bridges a gap between basic literature on the physics of solar cells and books specialized on certain types of solar cells. The last five years had several breakthroughs in photovoltaics and in the research on solar cells and solar cell materials. We consider them in this second edition. For example, the high potential of crystalline silicon with charge-selective hetero-junctions and alkaline treatments of thin-film absorbers, based on chalcopyrite, enabled new records. Research activities were boosted by the class of hybrid organic-inorganic metal halide perovskites, a promising newcomer in the field. This is essential reading for students interested in solar cells and materials for solar cells. It encourages students to solve tasks at the end of each chapter. It has been well applied for postgraduate students with background in materials science, engineering, chemistry or physics.
Download or read book Fundamentals of Solar Cell Design written by Inamuddin and published by John Wiley & Sons. This book was released on 2021-08-24 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solar cells are semiconductor devices that convert light photons into electricity in photovoltaic energy conversion and can help to overcome the global energy crisis. Solar cells have many applications including remote area power systems, earth-orbiting satellites, wristwatches, water pumping, photodetectors and remote radiotelephones. Solar cell technology is economically feasible for commercial-scale power generation. While commercial solar cells exhibit good performance and stability, still researchers are looking at many ways to improve the performance and cost of solar cells via modulating the fundamental properties of semiconductors. Solar cell technology is the key to a clean energy future. Solar cells directly harvest energy from the sun’s light radiation into electricity are in an ever-growing demand for future global energy production. Solar cell-based energy harvesting has attracted worldwide attention for their notable features, such as cheap renewable technology, scalable, lightweight, flexibility, versatility, no greenhouse gas emission, environment, and economy friendly and operational costs are quite low compared to other forms of power generation. Thus, solar cell technology is at the forefront of renewable energy technologies which are used in telecommunications, power plants, small devices to satellites. Aiming at large-scale implementation can be manipulated by various types used in solar cell design and exploration of new materials towards improving performance and reducing cost. Therefore, in-depth knowledge about solar cell design is fundamental for those who wish to apply this knowledge and understanding in industries and academics. This book provides a comprehensive overview on solar cells and explores the history to evolution and present scenarios of solar cell design, classification, properties, various semiconductor materials, thin films, wafer-scale, transparent solar cells, and so on. It also includes solar cells’ characterization analytical tools, theoretical modeling, practices to enhance conversion efficiencies, applications and patents.
Download or read book Silicon Solar Cell Process Development Fabrication and Analysis written by Aloysius Minahan and published by . This book was released on 1981 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Novel Reactor Design and Method for Atmospheric Pressure Chemical Vapor Deposition of Micro and Nano SiO2 x Films in Photovoltaic Applications written by Esmail Issa and published by BoD – Books on Demand. This book was released on 2022-01-01 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: A laboratory-scale reactor and a novel method for the atmospheric pressure chemical vapor deposition (APCVD) of SiO2-x films are developed. The deposited films are investigated to synthesize heterogeneously upon the substrate surface with the elimination of the so-called gas-phase reaction, hence preventing parasitic oxide particles upon the substrate surface and the reactor inner walls. The films are extensively inspected in terms of chemical and optical properties and utilized for crystalline silicon solar cell applications. Simple reactor design with low safety measures, a wide range of deposition rates, high film resilience, and stability for the intended applications are successfully achieved. The newly developed APCVD SiO2-x is proven to protect the Si wafer surface against texturing in alkaline and acidic solutions. Electroplated metallization schemes of heterojunction and passivated emitter rear contact solar cells are examined with the use of the SiO2-x as a masking layer in the grid electrode-free area.
