Download or read book Silicon Carbide written by Zhe Chuan Feng and published by . This book was released on 2004 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Silicon Carbide written by Moumita Mukherjee and published by IntechOpen. This book was released on 2011-10-10 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Carbide (SiC) and its polytypes, used primarily for grinding and high temperature ceramics, have been a part of human civilization for a long time. The inherent ability of SiC devices to operate with higher efficiency and lower environmental footprint than silicon-based devices at high temperatures and under high voltages pushes SiC on the verge of becoming the material of choice for high power electronics and optoelectronics. What is more important, SiC is emerging to become a template for graphene fabrication, and a material for the next generation of sub-32nm semiconductor devices. It is thus increasingly clear that SiC electronic systems will dominate the new energy and transport technologies of the 21st century. In 21 chapters of the book, special emphasis has been placed on the materials aspects and developments thereof. To that end, about 70% of the book addresses the theory, crystal growth, defects, surface and interface properties, characterization, and processing issues pertaining to SiC. The remaining 30% of the book covers the electronic device aspects of this material. Overall, this book will be valuable as a reference for SiC researchers for a few years to come. This book prestigiously covers our current understanding of SiC as a semiconductor material in electronics. The primary target for the book includes students, researchers, material and chemical engineers, semiconductor manufacturers and professionals who are interested in silicon carbide and its continuing progression.
Download or read book Silicon Carbide written by Chuan Feng Zhe and published by CRC Press. This book was released on 2003-10-30 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will provide useful information to material growers and evaluators, device design and processing engineers as well as potential users of SiC technologies. This book will help identify remaining challenging issues to stimulate further investigation to realize the full potential of wide band gap SiC for optoelectronic and microelectronic applications.
Download or read book Silicon Carbide 2006 materials Processing and Devices written by Michael Dudley and published by . This book was released on 2006 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Silicon Carbide materials Processing and Devices written by and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Silicon Carbide written by Moumita Mukherjee and published by IntechOpen. This book was released on 2011-10-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Carbide (SiC) and its polytypes, used primarily for grinding and high temperature ceramics, have been a part of human civilization for a long time. The inherent ability of SiC devices to operate with higher efficiency and lower environmental footprint than silicon-based devices at high temperatures and under high voltages pushes SiC on the verge of becoming the material of choice for high power electronics and optoelectronics. What is more important, SiC is emerging to become a template for graphene fabrication, and a material for the next generation of sub-32nm semiconductor devices. It is thus increasingly clear that SiC electronic systems will dominate the new energy and transport technologies of the 21st century. In 21 chapters of the book, special emphasis has been placed on the materials aspects and developments thereof. To that end, about 70% of the book addresses the theory, crystal growth, defects, surface and interface properties, characterization, and processing issues pertaining to SiC. The remaining 30% of the book covers the electronic device aspects of this material. Overall, this book will be valuable as a reference for SiC researchers for a few years to come. This book prestigiously covers our current understanding of SiC as a semiconductor material in electronics. The primary target for the book includes students, researchers, material and chemical engineers, semiconductor manufacturers and professionals who are interested in silicon carbide and its continuing progression.
Download or read book Silicon Carbide written by Moumita Mukherjee and published by IntechOpen. This book was released on 2011-10-10 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Carbide (SiC) and its polytypes, used primarily for grinding and high temperature ceramics, have been a part of human civilization for a long time. The inherent ability of SiC devices to operate with higher efficiency and lower environmental footprint than silicon-based devices at high temperatures and under high voltages pushes SiC on the verge of becoming the material of choice for high power electronics and optoelectronics. What is more important, SiC is emerging to become a template for graphene fabrication, and a material for the next generation of sub-32nm semiconductor devices. It is thus increasingly clear that SiC electronic systems will dominate the new energy and transport technologies of the 21st century. In 21 chapters of the book, special emphasis has been placed on the materials aspects and developments thereof. To that end, about 70% of the book addresses the theory, crystal growth, defects, surface and interface properties, characterization, and processing issues pertaining to SiC. The remaining 30% of the book covers the electronic device aspects of this material. Overall, this book will be valuable as a reference for SiC researchers for a few years to come. This book prestigiously covers our current understanding of SiC as a semiconductor material in electronics. The primary target for the book includes students, researchers, material and chemical engineers, semiconductor manufacturers and professionals who are interested in silicon carbide and its continuing progression.
Download or read book Silicon Carbide Materials Processing and Devices written by Feng Zhao and published by . This book was released on 2014 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Silicon Carbide Technology written by Tsunenobu Kimoto and published by John Wiley & Sons. This book was released on 2014-11-24 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction and up-to-date reference to SiC power semiconductor devices covering topics from material properties to applications Based on a number of breakthroughs in SiC material science and fabrication technology in the 1980s and 1990s, the first SiC Schottky barrier diodes (SBDs) were released as commercial products in 2001. The SiC SBD market has grown significantly since that time, and SBDs are now used in a variety of power systems, particularly switch-mode power supplies and motor controls. SiC power MOSFETs entered commercial production in 2011, providing rugged, high-efficiency switches for high-frequency power systems. In this wide-ranging book, the authors draw on their considerable experience to present both an introduction to SiC materials, devices, and applications and an in-depth reference for scientists and engineers working in this fast-moving field. Fundamentals of Silicon Carbide Technology covers basic properties of SiC materials, processing technology, theory and analysis of practical devices, and an overview of the most important systems applications. Specifically included are: A complete discussion of SiC material properties, bulk crystal growth, epitaxial growth, device fabrication technology, and characterization techniques. Device physics and operating equations for Schottky diodes, pin diodes, JBS/MPS diodes, JFETs, MOSFETs, BJTs, IGBTs, and thyristors. A survey of power electronics applications, including switch-mode power supplies, motor drives, power converters for electric vehicles, and converters for renewable energy sources. Coverage of special applications, including microwave devices, high-temperature electronics, and rugged sensors. Fully illustrated throughout, the text is written by recognized experts with over 45 years of combined experience in SiC research and development. This book is intended for graduate students and researchers in crystal growth, material science, and semiconductor device technology. The book is also useful for design engineers, application engineers, and product managers in areas such as power supplies, converter and inverter design, electric vehicle technology, high-temperature electronics, sensors, and smart grid technology.
Download or read book Symposium K Silicon Carbide Materials Processing and Devices written by and published by . This book was released on 2002 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: Symposium K is the second in a series of SiC symposia at the MRS Fall Meeting. Since the last meeting in 2000, advances in SiC materials, processing, and device design have resulted in implementation of SiC-based electronic systems and offer great promise in high voltage, high temperature, high frequency applications. Presenters focused on new developments in the basic science of SiC materials as well as rapidly maturing device technologies. The challenges in this field include understanding and decreasing defect densities in bulk SiC crystals, controlling morphology and residual impurities in epilayers, optimization of implant activation and oxide-SiC interfaces, and developing novel device structures. Topics of particular interest were in the area of bulk SiC growth (including large-diameter crystals), modeling, characterization, homo- and heteroepitaxial growth (e.g., doping control, morphology development, and carrier lifetimes), advances in ion implantation, improved ohmic and rectifying contacts, surfaces and interfaces, oxidation, and alternative dielectric materials and devices (including high-voltage, high-temperature, high-frequency sensors and system level benefits).
Download or read book Advances in Silicon Carbide Processing and Applications written by Stephen E. Saddow and published by Artech House. This book was released on 2004 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn the latest advances in SiC (Silicon Carbide) technology from the leading experts in the field with this new cutting-edge resource. The book is your single source for in-depth information on both SiC device fabrication and system-level applications. This comprehensive reference begins with an examination of how SiC is grown and how defects in SiC growth can affect working devices. Key issues in selective doping of SiC via ion implantation are covered with special focus on implant conditions and electrical activation of implants. SiC applications discussed include chemical sensors, motor-control components, high-temperature gas sensors, and high-temperature electronics. By cutting through the arcane data and jargon surrounding the hype on SiC, this book gives an honest assessment of today's SiC technology and shows you how SiC can be adopted in developing tomorrow's applications.
Download or read book SiC Materials and Devices written by Michael Shur and published by World Scientific. This book was released on 2007 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon carbide is known to have been investigated since 1907 when Captain H J Round demonstrated yellow and blue emission by applying bias between a metal needle and an SiC crystal. The potential of using SiC in semiconductor electronics was already recognized half a century ago. Despite its well-known properties, it has taken a few decades to overcome the exceptional technological difficulties of getting silicon carbide material to reach device quality and travel the road from basic research to commercialization.This second of two volumes reviews four important additional areas: the growth of SiC substrates; the deep defects in different SiC polytypes, which after many years of research still define the properties of bulk SiC and the performance and reliability of SiC devices; recent work on SiC JFETs; and the complex and controversial issues important for bipolar devices.Recognized leaders in the field, the contributors to this volume provide up-to-date reviews of further state-of-the-art areas in SiC technology and materials and device research.
Download or read book Silicon Carbide written by Chuan Feng Zhe and published by CRC Press. This book was released on 2003-10-30 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will provide useful information to material growers and evaluators, device design and processing engineers as well as potential users of SiC technologies. This book will help identify remaining challenging issues to stimulate further investigation to realize the full potential of wide band gap SiC for optoelectronic and microelectronic applications.
Download or read book Sic Materials And Devices Volume 1 written by Sergey Rumyantsev and published by World Scientific. This book was released on 2006-07-25 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: After many years of research and development, silicon carbide has emerged as one of the most important wide band gap semiconductors. The first commercial SiC devices — power switching Schottky diodes and high temperature MESFETs — are now on the market. This two-volume book gives a comprehensive, up-to-date review of silicon carbide materials properties and devices. With contributions by recognized leaders in SiC technology and materials and device research, SiC Materials and Devices is essential reading for technologists, scientists and engineers who are working on silicon carbide or other wide band gap materials and devices. The volumes can also be used as supplementary textbooks for graduate courses on silicon carbide and wide band gap semiconductor technology.
Download or read book Silicon Carbide Biotechnology written by Stephen E. Saddow and published by Elsevier. This book was released on 2011-11-14 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Carbide (SiC) is a wide-band-gap semiconductor biocompatible material that has the potential to advance advanced biomedical applications. SiC devices offer higher power densities and lower energy losses, enabling lighter, more compact and higher efficiency products for biocompatible and long-term in vivo applications ranging from heart stent coatings and bone implant scaffolds to neurological implants and sensors. The main problem facing the medical community today is the lack of biocompatible materials that are also capable of electronic operation. Such devices are currently implemented using silicon technology, which either has to be hermetically sealed so it cannot interact with the body or the material is only stable in vivo for short periods of time. For long term use (permanent implanted devices such as glucose sensors, brain-machine-interface devices, smart bone and organ implants) a more robust material that the body does not recognize and reject as a foreign (i.e., not organic) material is needed. Silicon Carbide has been proven to be just such a material and will open up a whole new host of fields by allowing the development of advanced biomedical devices never before possible for long-term use in vivo. This book not only provides the materials and biomedical engineering communities with a seminal reference book on SiC that they can use to further develop the technology, it also provides a technology resource for medical doctors and practitioners who are hungry to identify and implement advanced engineering solutions to their everyday medical problems that currently lack long term, cost effective solutions. Discusses Silicon Carbide biomedical materials and technology in terms of their properties, processing, characterization, and application, in one book, from leading professionals and scientists Critical assesses existing literature, patents and FDA approvals for clinical trials, enabling the rapid assimilation of important data from the current disparate sources and promoting the transition from technology research and development to clinical trials Explores long-term use and applications in vivo in devices and applications with advanced sensing and semiconducting properties, pointing to new product devekipment particularly within brain trauma, bone implants, sub-cutaneous sensors and advanced kidney dialysis devices
Download or read book Silicon Carbide 2012 written by Stephen E. Saddow and published by Cambridge University Press. This book was released on 2012 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Silicon Carbide 2010 materials Processing and Devices written by and published by . This book was released on 2010 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: