Download or read book Process Technology for Silicon Carbide Devices written by Carl-Mikael Zetterling and published by IET. This book was released on 2002 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains why SiC is so useful in electronics, gives clear guidance on the various processing steps (growth, doping, etching, contact formation, dielectrics etc) and describes how these are integrated in device manufacture.
Download or read book Fundamentals of Silicon Carbide Technology written by Tsunenobu Kimoto and published by John Wiley & Sons. This book was released on 2014-11-24 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction and up-to-date reference to SiC power semiconductor devices covering topics from material properties to applications Based on a number of breakthroughs in SiC material science and fabrication technology in the 1980s and 1990s, the first SiC Schottky barrier diodes (SBDs) were released as commercial products in 2001. The SiC SBD market has grown significantly since that time, and SBDs are now used in a variety of power systems, particularly switch-mode power supplies and motor controls. SiC power MOSFETs entered commercial production in 2011, providing rugged, high-efficiency switches for high-frequency power systems. In this wide-ranging book, the authors draw on their considerable experience to present both an introduction to SiC materials, devices, and applications and an in-depth reference for scientists and engineers working in this fast-moving field. Fundamentals of Silicon Carbide Technology covers basic properties of SiC materials, processing technology, theory and analysis of practical devices, and an overview of the most important systems applications. Specifically included are: A complete discussion of SiC material properties, bulk crystal growth, epitaxial growth, device fabrication technology, and characterization techniques. Device physics and operating equations for Schottky diodes, pin diodes, JBS/MPS diodes, JFETs, MOSFETs, BJTs, IGBTs, and thyristors. A survey of power electronics applications, including switch-mode power supplies, motor drives, power converters for electric vehicles, and converters for renewable energy sources. Coverage of special applications, including microwave devices, high-temperature electronics, and rugged sensors. Fully illustrated throughout, the text is written by recognized experts with over 45 years of combined experience in SiC research and development. This book is intended for graduate students and researchers in crystal growth, material science, and semiconductor device technology. The book is also useful for design engineers, application engineers, and product managers in areas such as power supplies, converter and inverter design, electric vehicle technology, high-temperature electronics, sensors, and smart grid technology.
Download or read book AspenCore Guide to Silicon Carbide written by Nitin Dahad and published by . This book was released on 2021-11-15 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Silicon Carbide Biotechnology written by Stephen E. Saddow and published by Elsevier. This book was released on 2011-11-14 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Carbide (SiC) is a wide-band-gap semiconductor biocompatible material that has the potential to advance advanced biomedical applications. SiC devices offer higher power densities and lower energy losses, enabling lighter, more compact and higher efficiency products for biocompatible and long-term in vivo applications ranging from heart stent coatings and bone implant scaffolds to neurological implants and sensors. The main problem facing the medical community today is the lack of biocompatible materials that are also capable of electronic operation. Such devices are currently implemented using silicon technology, which either has to be hermetically sealed so it cannot interact with the body or the material is only stable in vivo for short periods of time. For long term use (permanent implanted devices such as glucose sensors, brain-machine-interface devices, smart bone and organ implants) a more robust material that the body does not recognize and reject as a foreign (i.e., not organic) material is needed. Silicon Carbide has been proven to be just such a material and will open up a whole new host of fields by allowing the development of advanced biomedical devices never before possible for long-term use in vivo. This book not only provides the materials and biomedical engineering communities with a seminal reference book on SiC that they can use to further develop the technology, it also provides a technology resource for medical doctors and practitioners who are hungry to identify and implement advanced engineering solutions to their everyday medical problems that currently lack long term, cost effective solutions. Discusses Silicon Carbide biomedical materials and technology in terms of their properties, processing, characterization, and application, in one book, from leading professionals and scientists Critical assesses existing literature, patents and FDA approvals for clinical trials, enabling the rapid assimilation of important data from the current disparate sources and promoting the transition from technology research and development to clinical trials Explores long-term use and applications in vivo in devices and applications with advanced sensing and semiconducting properties, pointing to new product devekipment particularly within brain trauma, bone implants, sub-cutaneous sensors and advanced kidney dialysis devices
Download or read book SiC Materials and Devices written by Michael Shur and published by World Scientific. This book was released on 2007 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon carbide is known to have been investigated since 1907 when Captain H J Round demonstrated yellow and blue emission by applying bias between a metal needle and an SiC crystal. The potential of using SiC in semiconductor electronics was already recognized half a century ago. Despite its well-known properties, it has taken a few decades to overcome the exceptional technological difficulties of getting silicon carbide material to reach device quality and travel the road from basic research to commercialization.This second of two volumes reviews four important additional areas: the growth of SiC substrates; the deep defects in different SiC polytypes, which after many years of research still define the properties of bulk SiC and the performance and reliability of SiC devices; recent work on SiC JFETs; and the complex and controversial issues important for bipolar devices.Recognized leaders in the field, the contributors to this volume provide up-to-date reviews of further state-of-the-art areas in SiC technology and materials and device research.
Download or read book Fundamentals of Device and Systems Packaging Technologies and Applications Second Edition written by Rao Tummala and published by McGraw Hill Professional. This book was released on 2020-03-27 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fully updated, comprehensive guide to electronic packaging technologies This thoroughly revised resource offers rigorous and complete coverage of microsystems packaging at both the device and system level. You will get in-depth guidance on the latest technologies from academic and industry leaders. New chapters cover topics highly relevant to today's small and ultra-small systems. Fundamentals of Microsystems Packaging, Second Edition, discusses the entire field, from wafer to systems, and clearly explains every major contributing technology. The book details emerging systems, including smart wearables, the Internet of Things, bioelectronics for medical applications, cloud computing, and much more. Microelectronics, photonics, MEMS, sensors, RF, and wireless technologies are fully covered. • Covers the electrical, mechanical, chemical, and materials aspects of each technology • Contains examples of all common configurations and technologies • Written by the leading author in the field
Download or read book Silicon Carbide Devices and Technology written by Bill Fraley and published by . This book was released on 2015-03-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book elaborately discusses the silicon carbide devices and their technology. Lately, a few Silicon Carbide (SiC¡) power devices like metal-oxide-semiconductor field-effect-transistors (MOSFETs), Schottky-barrier diodes (SBDs), junction FETs (JFETs), and their combined modules have been introduced in the market. However, to securely supply them and decrease their cost, further enhancements for material characterizations as well as for device processing are still required. This book comprehensively elucidates current technologies on processing, modeling, characterization, manufacturing, and other important aspects of SiC devices. The aim of this book is to serve as a helpful source of information for advancements in SiC devices.
Download or read book Advances in Silicon Carbide Processing and Applications written by Stephen E. Saddow and published by Artech House. This book was released on 2004 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn the latest advances in SiC (Silicon Carbide) technology from the leading experts in the field with this new cutting-edge resource. The book is your single source for in-depth information on both SiC device fabrication and system-level applications. This comprehensive reference begins with an examination of how SiC is grown and how defects in SiC growth can affect working devices. Key issues in selective doping of SiC via ion implantation are covered with special focus on implant conditions and electrical activation of implants. SiC applications discussed include chemical sensors, motor-control components, high-temperature gas sensors, and high-temperature electronics. By cutting through the arcane data and jargon surrounding the hype on SiC, this book gives an honest assessment of today's SiC technology and shows you how SiC can be adopted in developing tomorrow's applications.
Download or read book Silicon Carbide Power Devices written by B. Jayant Baliga and published by World Scientific. This book was released on 2005 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power semiconductor devices are widely used for the control and management of electrical energy. The improving performance of power devices has enabled cost reductions and efficiency increases resulting in lower fossil fuel usage and less environmental pollution. This book provides the first cohesive treatment of the physics and design of silicon carbide power devices with an emphasis on unipolar structures. It uses the results of extensive numerical simulations to elucidate the operating principles of these important devices. Sample Chapter(s). Chapter 1: Introduction (72 KB). Contents: Material Properties and Technology; Breakdown Voltage; PiN Rectifiers; Schottky Rectifiers; Shielded Schottky Rectifiers; Metal-Semiconductor Field Effect Transistors; The Baliga-Pair Configuration; Planar Power MOSFETs; Shielded Planar MOSFETs; Trench-Gate Power MOSFETs; Shielded Trendch-Gate MOSFETs; Charge Coupled Structures; Integral Diodes; Lateral High Voltage FETs; Synopsis. Readership: For practising engineers working on power devices, and as a supplementary textbook for a graduate level course on power devices.
Download or read book Physics and Technology of Silicon Carbide Devices written by George Gibbs and published by . This book was released on 2016-10-01 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon (Si) is by far the most widely used semiconductor material for power devices. On the other hand, Si-based power devices are approaching their material limits, which has provoked a lot of efforts to find alternatives to Si-based power devices for better performance. With the rapid innovations and developments in the semiconductor industry, Silicon Carbide (SiC) power devices have progressed from immature prototypes in laboratories to a viable alternative to Si-based power devices in high-efficiency and high-power density applications. SiC devices have numerous persuasive advantages--high-breakdown voltage, high-operating electric field, high-operating temperature, high-switching frequency and low losses. Silicon Carbide (SiC) devices belong to the so-called wide band gap semiconductor group, which offers a number of attractive characteristics for high voltage power semiconductors when compared to commonly used silicon (Si). Recently, some SiC power devices, for example, Schottky-barrier diodes (SBDs), metal-oxide-semiconductor field-effecttransistors (MOSFETs), junction FETs (JFETs), and their integrated modules have come onto the market. Physics and Technology of Silicon Carbide Devices abundantly describes recent technologies on manufacturing, processing, characterization, modeling, etc. for SiC devices.
Download or read book Silicon Carbide Technology for Advanced Human Healthcare Applications written by Stephen E. Saddow and published by Elsevier. This book was released on 2022-07-13 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: After over two decades of focused research and development, silicon carbide (SiC) is now ready for use in the healthcare sector and Silicon Carbide Technology for Advanced Human Healthcare Applications provides an up-to-date assessment of SiC devices for long-term human use. It explores a plethora of applications that SiC is uniquely positioned for in human healthcare, beginning with the three primary areas of technology which are closest to human trials and thus adoption in the healthcare industry: neural implants and spinal cord repair, graphene and biosensors, and finally deep tissue cancer therapy using SiC nanotechnology. Biomedical-inspired engineers, scientists, and healthcare professionals will find this book to be very useful in two ways: (I) as a guide to new ways to design and develop advanced medical devices and (II) as a reference for new developments in the field. The book’s intent is to stimulate ideas for further technological enhancements and breakthroughs, which will provide alternative solutions for human healthcare applications. Discusses the utilization of SiC materials for biomedical applications Provides a logical pathway to understand why SiC is ideal for several critical applications, in particular for long-term implantable devices, and will serve as a guide to new ways to design and develop advanced medical devices Serves as a reference for new developments in the field and as a technology resource for medical doctors and practitioners looking to identify and implement advanced engineering solutions to everyday medical challenges that currently lack long-term, cost-effective solutions
Download or read book Advancing Silicon Carbide Electronics Technology II written by Konstantinos Zekentes and published by Materials Research Forum LLC. This book was released on 2020-03-15 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents an in-depth review and analysis of Silicon Carbide device processing. The main topics are: (1) Silicon Carbide Discovery, Properties and Technology, (2) Processing and Application of Dielectrics in Silicon Carbide Devices, (3) Doping by Ion Implantation, (4) Plasma Etching and (5) Fabrication of Silicon Carbide Nanostructures and Related Devices. The book is also suited as supplementary textbook for graduate courses. Keywords: Silicon Carbide, SiC, Technology, Processing, Semiconductor Devices, Material Properties, Polytypism, Thermal Oxidation, Post Oxidation Annealing, Surface Passivation, Dielectric Deposition, Field Effect Mobility, Ion Implantation, Post Implantation Annealing, Channeling, Surface Roughness, Dry Etching, Plasma Etching, Ion Etching, Sputtering, Chemical Etching, Plasma Chemistry, Micromasking, Microtrenching, Nanocrystal, Nanowire, Nanotube, Nanopillar, Nanoelectromechanical Systems (NEMS).
Download or read book SiC Power Materials written by Zhe Chuan Feng and published by Springer Science & Business Media. This book was released on 2004-06-09 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the 1950s Shockley predicted that SiC would quickly replace Si as a result of its superior material properties. In many ways he was right and today there is an active industry based on SiC, with new achievements being reported every year. This book reviews the progress achieved in SiC research and development, particularly over the past 10 years. It presents the essential properties of 3C-, 6H- and 4H-SiC polytypes including structural, electrical, optical, surface and interface properties; describes existing key SiC devices and also the challenges in materials growth and device fabrication of the 21st century. Overall it provides an up-to-date reference book suitable for a broad audience of newcomers, graduate students and engineers in industrial R&D.
Download or read book Silicon Carbide written by Wolfgang J. Choyke and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 911 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 1997 publication of "Silicon Carbide - A Review of Fundamental Questions and Applications to Current Device Technology" edited by Choyke, et al., there has been impressive progress in both the fundamental and developmental aspects of the SiC field. So there is a growing need to update the scientific community on the important events in research and development since then. The editors have again gathered an outstanding team of the world's leading SiC researchers and design engineers to write on the most recent developments in SiC.
Download or read book Sic Materials And Devices Volume 1 written by Sergey Rumyantsev and published by World Scientific. This book was released on 2006-07-25 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: After many years of research and development, silicon carbide has emerged as one of the most important wide band gap semiconductors. The first commercial SiC devices — power switching Schottky diodes and high temperature MESFETs — are now on the market. This two-volume book gives a comprehensive, up-to-date review of silicon carbide materials properties and devices. With contributions by recognized leaders in SiC technology and materials and device research, SiC Materials and Devices is essential reading for technologists, scientists and engineers who are working on silicon carbide or other wide band gap materials and devices. The volumes can also be used as supplementary textbooks for graduate courses on silicon carbide and wide band gap semiconductor technology.
Download or read book Gallium Nitride and Silicon Carbide Power Devices written by B Jayant Baliga and published by World Scientific Publishing Company. This book was released on 2016-12-12 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last 30 years, significant progress has been made to improve our understanding of gallium nitride and silicon carbide device structures, resulting in experimental demonstration of their enhanced performances for power electronic systems. Gallium nitride power devices made by the growth of the material on silicon substrates have gained a lot of interest. Power device products made from these materials have become available during the last five years from many companies. This comprehensive book discusses the physics of operation and design of gallium nitride and silicon carbide power devices. It can be used as a reference by practicing engineers in the power electronics industry and as a textbook for a power device or power electronics course in universities. Request Inspection Copy
Download or read book Advanced Silicon Carbide Devices and Processing written by Stephen Saddow and published by BoD – Books on Demand. This book was released on 2015-09-17 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the production of the first commercially available blue LED in the late 1980s, silicon carbide technology has grown into a billion-dollar industry world-wide in the area of solid-state lighting and power electronics. With this in mind we organized this book to bring to the attention of those well versed in SiC technology some new developments in the field with a particular emphasis on particularly promising technologies such as SiC-based solar cells and optoelectronics. We have balanced this with the more traditional subjects such as power electronics and some new developments in the improvement of the MOS system for SiC MOSFETS. Given the importance of advanced microsystems and sensors based on SiC, we also included a review on 3C-SiC for both microsystem and electronic applications.
