Download or read book Silicon Carbide Ceramics written by Shigeyuki Sōmiya and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Silicon Carbide Ceramics 1 written by S. Somiya and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discovered by Edward G. Acheson about 1890, silicon carbide is one of the oldest materials and also a new material. It occurs naturally in meteorites, but in very small amounts and is not in a useable state as an industrial material. For industrial require ments, large amounts of silicon carbide must be synthesized by solid state reactions at high temperatures. Silicon carbide has been used for grinding and as an abrasive material since its discovery. During World War II, silicon carbide was used as a heating element; however, it was difficult to obtain high density sintered silicon carbide bodies. In 1974, S. Prochazka reported that the addition of small amounts of boron compounds and carbide were effective in the sintering process to obtain high density. It was then possible to produce high density sintered bodies by pressureless sintering methods in ordinary atmosphere. Since this development, silicon carbide has received great attention as one of the high temperature structural ceramic materials. Since the 1970s, many research papers have appeared which report studies of silicon carbide and silicon nitride for structural ceramics.

Download or read book Silicon Carbide Ceramics written by S. Somiya and published by Springer Science & Business Media. This book was released on 1991-08-31 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon carbides have major industrial uses as high temperature structural ceramic materials. These two volumes are translated from the Japanese and provide a comprehensive account of the seminal work going on in Japan.

Download or read book Silicon Carbide Ceramics written by Andrew J. Ruys and published by Elsevier. This book was released on 2023-01-22 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has been three decades since the last significant book was published on SiC ceramics (other than those books that specifically focus on SiC semiconductors). Thirty years has been a long time in the world of SiC ceramics. In the early 1990s, SiC was still a relatively obscure ceramic even within the materials community, prominent only as an industrial abrasive (carborundum), and a refractory (Chapter 7). This has all changed dramatically in the 21st century. For example, As a semiconductor, SiC greatly surpasses silicon in performance, especially in high-power systems. Its market penetration since its launch in 2001 has been exponential. Single-crystal SiC semiconductors are covered in Chapter 3 Millions of military and paramilitary personnel have globally been protected with lightweight SiC body armour, since the late 1990s. Body armour is covered in Chapters 4 and 5 SiC–SiC is a composite material close to commercialization that makes possible high-temperature load-bearing applications hitherto only able to be hypothesized: from ultra-high-temperature jet turbine blades to advanced nuclear fuel encapsulation, the possibilities are very promising. Aerospace applications are covered in Chapter 9 Other key areas that are addressed are blast-resistant SiC vehicle/vessel armour in Chapter 8 and wear-resistant SiC ceramics in Chapter 6 Silicon Carbide Ceramics will be an essential reference resource for academic and industrial researchers and materials scientists and engineers working in ceramic materials for the semiconductor, defence, aerospace, wear resistance and refractory fields Presents an extensive review of the history, production and properties of SiC ceramics, including their characterization and applications Discusses classical and state-of-the-art sintering technologies for SiC ceramics Focuses on the future of ceramic manufacturing and advanced ceramic additive technologies

Download or read book Cellular Ceramics written by Michael Scheffler and published by John Wiley & Sons. This book was released on 2006-05-12 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cellular ceramics are a specific class of porous materials which includes among others foams, honeycombs, connected fibers, robocast structures and assembled hollow spheres. Because of their particular structure, cellular ceramics display a wide variety of specific properties which make them indispensable for various engineering applications. An increasing number of patents, scientific literature and international conferences devoted to cellular materials testifies to a rapidly growing interest of the technical community in this topic. New applications for cellular ceramics are constantly being put under development. The book, authored by leading experts in this emerging field, gives an overview of the main aspects related to the processing of diverse cellular ceramic structures, methods of structural and properties characterisation and well established industrial, novel and potential applications. It is an introduction to newcomers in this research area and allows students to obtain an in-depth knowledge of basic and practical aspects of this fascinating class of advanced materials.

Download or read book Handbook of Advanced Ceramics written by Branko Matović and published by Elsevier Inc. Chapters. This book was released on 2013-04-11 with total page 1258 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Properties and Applications of Silicon Carbide written by Rosario Gerhardt and published by BoD – Books on Demand. This book was released on 2011-04-04 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, we explore an eclectic mix of articles that highlight some new potential applications of SiC and different ways to achieve specific properties. Some articles describe well-established processing methods, while others highlight phase equilibria or machining methods. A resurgence of interest in the structural arena is evident, while new ways to utilize the interesting electromagnetic properties of SiC continue to increase.

Download or read book Silicon based Structural Ceramics written by Brian W. Sheldon and published by . This book was released on 1994 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metal Reinforced Ceramics written by Andrew John Ruys and published by Woodhead Publishing. This book was released on 2020-11-07 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal-Reinforced Ceramics covers the principle of metal-fiber-reinforced ceramics, a well-known topic in the field of reinforced concrete. Much of the work that has been done has remained unpublished, hidden in industrial company archives due to the commercial sensitivity associated with the respective technologies that prevailed at the time, which no longer applies today. This book will discuss advanced technologies that have largely been undocumented before in a broad range of industrial application areas, with updates on alumina, silicon carbide, boron carbide, tungsten carbide, fused silica, and carbon-based ceramics which are hard, heat resistant, wear resistant, and chemically durable. Provides detailed information on fundamental principles, advanced processing technologies and industrial applications Features comprehensive industrial knowledge not usually in the public domain from the author’s experience spanning more than three decades Features armor ceramics, bioceramics, aerospace, mining and architectural ceramic applications

Download or read book Nitrogen Ceramics written by F.L. Riley and published by Springer. This book was released on 2014-01-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The suggestion that a NATO Advanced Study Institute would be an excellent forum for reviews and informed discussion on the broad subject of Nitrogen Ceramics, arose out of discussions with colleagues in the Department of Ceramics at the University of Leeds early in 1975. There was no doubt that such a meeting would be both very valuable and timely. Scientific and technological interest in the nitride ceramics and in silicon nitride in part icular had been growing steadily during the 20-year period following 1955. The intensive five-year programme initiated by the Advanced Research Projects Agency of the U. S. Department of Defence, on the development of a design capability in brittle materials for high temperature applications, had been based principally on silicon nitride and silicon carbide ceramics, and was due to reach the end of its first stage in the autumn of 1976. It was clear that by then a considerable volume of information covering many aspects of silicon nitride would be available for presentation or review. Coincidentally, the same five-year period had seen the discovery, and increasingly detailed investigation, of ceramic materials based on the AI-Si-N-O and similar systems. Besides being of great interest for their crystal chemistry and structural relationships, some of these materials could be assumed potentially to be of equal importance to the silicon nitride ceramics. More recently progress had also been made in the sintering of covalent materials, as demonstrated for the case of silicon carbide.

Download or read book Structural Ceramics written by John Jr. Wachtman and published by Elsevier. This book was released on 2012-12-02 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Materials Science and Technology, Volume 29: Structural Ceramics presents an overview of structural ceramics. This book begins with a survey of potential uses, designs, and barriers of particular types of structural ceramics. The silicon carbide family, silicon nitride and sialon family, and transformation toughened ceramics are discussed in detail, followed by an analysis of the various processing routes of each family of structural ceramics. This publication concludes with a review of the tribology of structural ceramics, considering many applications for structural ceramics in heat engines and other machinery that involve moving parts which must often resist wear or erosion. This volume is recommended for engineers, scientists, and researchers concerned with structural ceramics.

Download or read book Advances in Ceramic Armor written by Jeffrey J. Swab and published by Wiley-American Ceramic Society. This book was released on 2005-12-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains over 30 papers on the development and incorporation of ceramic materials for armor applications. Topics include impact and penetration modeling, dynamic and static testing to predict performance, damage characterization, non-destructive evaluation and novel material concepts.

Download or read book Ceramic Processing and Sintering written by Mohamed N. Rahaman and published by CRC Press. This book was released on 2017-12-19 with total page 963 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the field's premiere source, this reference is extensively revised and expanded to collect hard-to-find applications, equations, derivations, and examples illustrating the latest developments in ceramic processing technology. This book is concerned primarily with the processing of polycrystalline ceramics and focuses on the widespread fabrication of ceramics by the firing of consolidated powders forms. A brief treatment of sol-gel processing is also included. Ceramic Processing and Sintering, Second Edition provides clear and intensive discussions on colloidal and sol-gel processing, sintering of ceramics, and kinetic processes in materials. From powder synthesis and consolidation to sintering and densification behavior, this latest edition emphasizes the impact of each processing procedure on ceramic properties. The second edition also contains new and extended discussions on colloid stability, polymer growth and gelation, additives in ceramic forming, diffusion and defect strucutre, normal and abnormal grain growth, microwave sintering, Rayleigh instability effects, and Ostwald ripening. Illustrating the interconnectedness between the various steps in the overall fabrication route, Ceramic Processing and Sintering, Second Edition approaches the fundamental issues of each process and show how they are applied to the practical fabrication of ceramics.

Download or read book Handbook of Ceramic Composites written by Narottam P. Bansal and published by Springer Science & Business Media. This book was released on 2006-08-25 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This valuable handbook has been compiled by internationally renowned researchers in the field. Each chapter is focused on a specific composite system or a class of composites, presenting a detailed description of processing, properties, and applications.

Download or read book Ceramic Matrix Composites written by Narottam P. Bansal and published by John Wiley & Sons. This book was released on 2014-10-27 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive source of information on various aspects of ceramic matrix composites (CMC). It covers ceramic and carbon fibers; the fiber-matrix interface; processing, properties and industrial applications of various CMC systems; architecture, mechanical behavior at room and elevated temperatures, environmental effects and protective coatings, foreign object damage, modeling, life prediction, integration and joining. Each chapter in the book is written by specialists and internationally renowned researchers in the field. This book will provide state-of-the-art information on different aspects of CMCs. The book will be directed to researchers working in industry, academia, and national laboratories with interest and professional competence on CMCs. The book will also be useful to senior year and graduate students pursuing degrees in ceramic science and engineering, materials science and engineering, aeronautical, mechanical, and civil or aerospace engineering. Presents recent advances, new approaches and discusses new issues in the field, such as foreign object damage, life predictions, multiscale modeling based on probabilistic approaches, etc. Caters to the increasing interest in the application of ceramic matrix composites (CMC) materials in areas as diverse as aerospace, transport, energy, nuclear, and environment. CMCs are considered ans enabling technology for advanced aeropropulsion, space propulsion, space power, aerospace vehicles, space structures, as well as nuclear and chemical industries. Offers detailed descriptions of ceramic and carbon fibers; fiber-matrix interface; processing, properties and industrial applications of various CMC systems; architecture, mechanical behavior at room and elevated temperatures, environmental effects and protective coatings, foreign object damage, modeling, life prediction, integration/joining.

Download or read book Silicon Based Structural Ceramics for the New Millennium written by Manuel E. Brito and published by Wiley-American Ceramic Society. This book was released on 2003 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on recent scientific and technological developments in silicon-based (i.e., silicon nitride, SiAlONs, silicon carbide, silicon oxynitride) structural ceramics. Authors from academia and industry assess the current state of the art in slilicon-based structual ceramics. Industrial case studies are advocated to highlight the development and application of these materials in real engineering environments. Proceedings of the symposium held at the 104th Annual Meeting of The American Ceramic Society, April 28-May1, 2002 in Missouri; Ceramic Transactions, Volume 142.

Download or read book Microstructural Characterization of Reaction Formed Silicon Carbide Ceramics Materials Characterization written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-07 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructural characterization of two reaction-formed silicon carbide ceramics has been carried out by interference layering, plasma etching, and microscopy. These specimens contained free silicon and niobium disilicide as minor phases with silicon carbide as the major phase. In conventionally prepared samples, the niobium disilicide cannot be distinguished from silicon in optical micrographs. After interference layering, all phases are clearly distinguishable. Back scattered electron (BSE) imaging and energy dispersive spectrometry (EDS) confirmed the results obtained by interference layering. Plasma etching with CF4 plus 4% O2 selectively attacks silicon in these specimens. It is demonstrated that interference layering and plasma etching are very useful techniques in the phase identification and microstructural characterization of multiphase ceramic materials. Singh, M. and Leonhardt, T. A. Glenn Research Center ...