Download or read book Silicon Carbide 2002 Materials Processing and Devices Volume 742 written by Stephen E. Saddow and published by . This book was released on 2003-03-25 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in silicon carbide materials, processing and device design have recently resulted in implementation of SiC-based electronic systems and offer great promise in high-voltage, high-temperature and high-frequency applications. This volume focuses on new developments in basic science of SiC materials as well as rapidly maturing device technologies. The challenges in this field include understanding and decreasing defect densities in bulk SiC crystals, controlling morphology and residual impurities in epilayers, optimization of implant activation and oxide-SiC interfaces, and developing novel device structures. This book brings together the crystal growers, physicists and device experts needed to continue the rapid pace of silicon-carbide-based technology. Topics include: epitaxial growth; characterization/defects; MOS technology; SiC processing and devices.
Download or read book Silicon Carbide materials Processing and Devices written by and published by . This book was released on 2002 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials IV written by Tatsuki Ohji and published by John Wiley & Sons. This book was released on 2010-11-23 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue contains 25 invited and contributed papers, all peer reviewed according to the American Ceramic Society Review Process. The latest developments in processing and manufacturing technologies are covered, including green manufacturing, smart processing, advanced composite manufacturing, rapid processing, joining, machining, and net shape forming technologies. These papers discuss the most important aspects necessary for understanding and further development of processing and manufacturing of ceramic materials and systems.
Download or read book Solid State Ionics 2002 Volume 756 written by Philippe Knauth and published by . This book was released on 2003-04-17 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MRS Symposium Proceeding series is an internationally recognised reference suitable for researchers and practitioners.
Download or read book GaN and Related Alloys 2002 Volume 743 written by Materials Research Society. Meeting and published by . This book was released on 2003-06-02 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt: This year's nitride symposium showed the scope of nitride-related advances spanning basic materials physics over process technology to high-performance devices. Progress was reported in bulk growth of GaN and AlN, growth on various substrates and substrate orientations, optical properties of InN, defect and doping analysis of p-doped GaN, and polarization properties. These led to new performance records in visible light emitter technology, i.e., higher efficiency/higher brightness, UV emitters with shorter wavelength, and UV and photo detectors. Advances in the development of nitride-based electronic devices with new heterostructure FET designs for RF power applications, including those on Si substrates and wafer fusion, are also reported. This book captures the exciting developments in this rapidly progressing field. Topics include: epitaxy - devices and defect reduction; defects and characterization; epitaxy - nonpolar orientations and alloys; optical properties; UV emitters and detectors; visible light emitters; electronic devices; characterization of defects and transport; and contacts, processing and p-type nitrides.
Download or read book Novel Materials and Processes for Advanced CMOS Volume 745 written by Mark I. Gardner and published by . This book was released on 2003-03-25 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in MOS integrated-circuit technology is largely driven by the ability to dimensionally scale the constituent components of individual devices and their associated interconnections. Given a set of materials with fixed properties, this scaling is finite and its predicted limits are rapidly approaching. The International Technology Roadmap for Semiconductors establishes the pace at which this scaling occurs and identifies many of the technological challenges ahead. This volume assembles representatives from the fields of materials science, physics, electrical and chemical engineering to provide an insightful review of current technology and understanding. Specifically, the intent is to discuss materials issues stemming from device scaling to sub-100nm technology nodes. Topics include: high-k characterization; atomic layer deposition; gate metal materials and integration; contacts and ultrashallow junction formation; theory and modeling and crystalline oxides for gate dielectrics.
Download or read book CMOS Front End Materials and Process Technology Volume 765 written by Materials Research Society. Meeting and published by . This book was released on 2003-09-12 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the future, because fundamental materials and process limits are being approached, continued transistor scaling will not be as straightforward. Future complementary metal-oxide semiconductor (MOS) transistors will require high-permittivity (high-k) gate dielectrics and metal gate electrodes, as well as low-resistance ultrashallow junctions, in order to meet the stringent specifications of the International Technology Roadmap for Semiconductors. Techniques to improve transconductance and drive current may also be required. Process integration issues must be solved, and reliability must be assured, before any new material or processing technique can be used in IC manufacture. A further complication is that the key challenges will differ according to application. This book reports research results from industry, government labs and academia covering a wide scope of front-end process issues for future CMOS technologies. Topics include: advanced materials and structures; high-k dielectrics; advanced gate stack materials; heterogeneous integration and strained Si technologies; ultrashallow junction technology; strained Si and source/drain technology; and laser annealing and silicide processes.
Download or read book Crystalline Oxide Volume 747 written by D. G. Schlom and published by . This book was released on 2003-06-23 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of two symposia held at the 2002 MRS Fall Meeting in Boston. Papers from Symposium T, Crystalline Oxides on Semiconductors, bring together experts from different technology areas - high-k gate dielectrics, novel memories, and ferroelectrics, for example - to examine commonality among the fields. These papers offer an overview of the field, highlight interesting experimental results and device ideas, and feature innovative theoretical approaches to understanding these systems. Symposium V, Interfacial Issues for Oxide-Based Electronics, covers a wide range of topics involving the interfaces between electro-optical oxide layers and other materials. Overall, it is clear that a new generation of materials and heterostructures has been enabled by the increasing control of interfacial phenomena. Topics include: epitaxial oxide-silicon heterostructures; ferroelectric thin films on silicon; theory and modeling; crystalline oxides for gate dielectrics; transparent conducting oxides; transparent conducting oxides and oxide growth and properties; field effect devices and gate dielectrics; ferroelectrics, capacitors and sensors; organic devices and interfacial growth issues.
Download or read book Solid State Chemistry of Inorganic Materials IV Volume 755 written by M. Á. Alario-Franco and published by . This book was released on 2003-08-14 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its inception in the mid-twentieth century, solid-state chemistry has matured within the chemical sciences. In the same way that chemistry itself is considered a central science, solid-state chemistry is central in its many relations to physics, in particular to solid-state physics and also to materials science and engineering. There are few problems in materials science or engineering in which the preparation of the material itself is not a central issue and, more often than not, this will be a solid-state chemical problem. For these reasons, it is not surprising that in the technological development of the last century, solid-state chemistry has grown in importance. It is not only a synthesis science, it is also the science of structures, defects, stoichiometry, and physical chemical properties. Most of these are explored in the book. Topics include: metal-to-insulator transition; porous materials; dielectric materials; nanomaterials; synthesis of materials; films and catalytic materials; CMR materials; thermoelectric materials; dielectrics, catalysts, phosphors, films and properties and synthesis and crystal growth.
Download or read book Surface Engineering 2002 Synthesis Characterization and Applications Volume 750 written by A. Kumar and published by . This book was released on 2003-06-02 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a forum for international and interdisciplinary discussion of phenomena where materials performance may be enhanced through engineered surfaces and interfaces. The materials science of hard and wear-resistant coatings, including nanostructured coatings, is a scientifically challenging problem with immediate technological applications in machine and machining tools, magnetic recording and other manufacturing industries. Hard coating systems designed for use in next-generation materials applications must achieve a combination of physical properties. The performance and reliability of MEMS devices strongly depend on the near-surface properties and many materials issues at the micro- and nanoscale remain to be resolved. This book reviews key aspects, discusses ongoing research and speculates on future trends. Topics include: nano- and micrometer-scale characterization and properties; synthesis and characterization of nanostructured materials; deposition, characterization and properties of films and coatings; industrial applications of surface engineering; atomistic and continuum modeling of materials properties; surface engineering issues for bio/microelectronics applications; and surface engineering issues in MEMS structures and devices.
Download or read book Membranes Volume 752 written by Materials Research Society. Meeting and published by . This book was released on 2003-04-11 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this 2003 volume from the Materials Research Society is twofold - to provide an overview of advances in membrane science and technology and to enhance communication among membrane researchers from a variety of disciplines including chemistry, biology, biotechnology, chemical engineering and materials science. Membranes can be used for inert or reactive separations in a variety of fields including gas purification, water treatment, energy storage and conversion, bio-technology and biomedicine. The book brings together scientists involved in the entire spectrum of modern approaches to membrane science and technology to address synthesis, characterization and transport properties and their use in established and emerging applications. Topics include: membrane synthesis and preparation; surface modification and additives; hybrid and composite membranes; membrane characterization; transport phenomena in membranes; charged membranes and ion transfer; gas permeation and separation; pervaporation and vapor permeation; dense membranes for hydrogen separation; applications in biotechnology and biomedicine; and membrane R&D for industrial and emerging applications.
Download or read book Magnetoelectronics and Magnetic Materials Novel Phenomena and Advanced Characterization Volume 746 written by Shufeng Zhang and published by . This book was released on 2003-04 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book combines the proceedings of Symposium Q, Magnetoelectronics-Novel Magnetic Phenomena in Nanostructures, and Symposium R, Advanced Characterization of Artificially Structured Magnetic Materials, both from the 2002 MRS Fall Meeting in Boston. The common focus is on artificially engineered nanostructured magnetic systems. The two symposia address new phenomena in magnetoelectronic applications, their preparation, and advanced methodology for characterization. Interest in nanomagnetism has been catalyzed by advances in two fields of research. 1) Advances in materials synthesis of structures whose length scales transcend magnetic length scales and open the possibility for creating materials with new magnetic properties. Such structures include interfaces, superlattices, tunneling devices, nanostructures, and single-molecule magnets. 2) Advances in sample characterization techniques for nano-magnetism which allow detailed exploration of structure-property relationships in nanostructured magnetic systems. The volume highlights current trends in both fields and offers an outlook for further advances and new capabilities.
Download or read book Organic and Polymeric Materials and Devices written by Materials Research Society. Meeting and published by . This book was released on 2003 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of organic semiconductors has seen much development in the past years. Displays based on light-emitting diodes made of small organic molecules as well as polymers, have recently been commercialized. Other applications, such as electronic circuits for tagging, efficient photovoltaic devices and biosensors, have already been demonstrated. This volume brings together a "wish list" of leading researchers in the fields of chemistry, physics and technology of organic devices. Novel device concepts such as charge-generation layers, metal complexes and the use of heterojunctions are presented and should lead to further improvement in the efficiency of organic light-emitting diodes. In the field of organic transistors, major progress is reported on the charge-transport properties of organic semiconductors; mobilities up to 5cm2/Vs are reported for pentacene-based transistors. High mobility n-type materials, which enable the development of ambipolar organic electronic circuits, are also discussed. And new approaches to fully printable displays on substrates, such as textiles and paper, are presented. These may lead the way to new applications of organic optoelectronic devices.
Download or read book Materials Inspired by Biology written by James L. Thomas (Ph. D.) and published by . This book was released on 2003 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continued interest in the field of biologically inspired materials is strongly motivated by the fact that the nanoscale and microscale organization found in biological materials often leads to exceptional macroscopic materials properties. The ability to mimic these structures should lead to new synthetic materials with similarly remarkable behavior in both biomedical and materials arenas. This has led to an enormous amount of research in a variety of materials areas, including those aimed at: 1) unique ceramics or composites for use in biomaterials, magnetic and optical applications; 2) self-assembled biopolymeric systems for use in biomaterials and biosensor applications; and 3) colloidal and amphiphilic systems for application in biomedicine, nanotechnology and biosensors. Accordingly, this volume brings together a broad range of researchers whose interests span the full breadth of biology, and in addition, those who find different inspiration in biology itself. For some, that inspiration is in the creation of new materials that have important biological (especially biomedical) applications. For others, it is the imitation of the behavior of a biological material, molecule or process that is of interest. Finally, with increasing frequency, researchers are drawing inspiration from the synthetic pathways that biology uses, exploiting these pathways, and modifying them chemically or genetically to make entirely novel molecules and materials. Biologically inspired materials is a rapidly evolving arena of materials science research, and the work presented here reflects recent advances and new perspectives in the field. Topics include: tissue engineering and biomaterials; novel biomimeticand bioinspired polymers; biomineralization, colloidal and templated materials; and amphiphilic membranes and surfaces.
Download or read book Materials Technology and Reliability for Advanced Interconnects and Low k Dielectrics 2003 written by Materials Research Society. Meeting and published by . This book was released on 2003 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Silicon Carbide written by Zhe Chuan Feng and published by . This book was released on 2004 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Progress in Semiconductors II Electronic and Optoelectronic Applications Volume 744 written by B. D. Weaver and published by . This book was released on 2003-04-16 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent years have witnessed dramatic success in the development of semiconductor materials and related quantum structures for applications in electronics and optoelectronics. Progress has also been made in manufacturable (low cost, high volume) growth and processing of semiconductor materials for such device structures. Novel approaches have been proposed to integrate compound semiconductor devices with conventional silicon processing. This book provides a comprehensive overview of the progress on growth, properties and processing of semiconductor materials and quantum structures, as well to underscore the progress on devices such as transistors, light sources, detectors and modulators. Brought to maturity, these devices will likely see widespread application in infrared imaging, chemical and biological sensing, surveillance, short links, space-based applications, solar cells, high-bandwidth communications, and more. Topics include: electronic devices; Si/Ge devices and technology; zinc oxide and related compounds; emitters, lasers and photovoltaics; nanostructures; innovative materials and devices; detectors; and III-nitride materials and devices.
