Download or read book Silicon and Silicide Nanowires written by Yu Huang and published by CRC Press. This book was released on 2016-04-19 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscale materials are showing great promise in various electronic, optoelectronic, and energy applications. Silicon (Si) has especially captured great attention as the leading material for microelectronic and nanoscale device applications. Recently, various silicides have garnered special attention for their pivotal role in Si device engineering

Download or read book Nanowire Electronics written by Guozhen Shen and published by Springer. This book was released on 2018-11-23 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive overview of recent advances in developing nanowires for building various kinds of electronic devices. Specifically the applications of nanowires in detectors, sensors, circuits, energy storage and conversion, etc., are reviewed in detail by the experts in this field. Growth methods of different kinds of nanowires are also covered when discussing the electronic applications. Through discussing these cutting edge researches, the future directions of nanowire electronics are identified.

Download or read book Mass Transport of Nanocarriers written by Rita Elena Serda and published by CRC Press. This book was released on 2016-04-19 with total page 948 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes barriers from the macro to the nanoscale, starting with endothelial and mucosal barriers, and ending with cellular organelles. Experimental approaches to track nanoparticles in vitro and in vivo are presented, as well as the ability to tailor-make nanoparticles for specific functions. Several model types of nanoparticles are pre

Download or read book Handbook of Innovative Nanomaterials written by Xiaosheng Fang and published by CRC Press. This book was released on 2012-07-05 with total page 948 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, not only is the research on nanoscale is among the most active fields in current science, but it is also being gradually introduced into our daily lives. The purpose of this book is to provide the readers with a comprehensive review of the state-of-the-art research activities in the field of innovative nanomaterials. This book is a compre

Download or read book Silicon Nanowire Transistors written by Ahmet Bindal and published by Springer. This book was released on 2016-02-23 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the n and p-channel Silicon Nanowire Transistor (SNT) designs with single and dual-work functions, emphasizing low static and dynamic power consumption. The authors describe a process flow for fabrication and generate SPICE models for building various digital and analog circuits. These include an SRAM, a baseband spread spectrum transmitter, a neuron cell and a Field Programmable Gate Array (FPGA) platform in the digital domain, as well as high bandwidth single-stage and operational amplifiers, RF communication circuits in the analog domain, in order to show this technology’s true potential for the next generation VLSI.

Download or read book Magnetic Nano and Microwires written by Manuel Vázquez and published by Woodhead Publishing. This book was released on 2020-03-31 with total page 1010 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic Nano-and Microwires: Design, Synthesis, Properties and Applications, Second Edition, reviews the growth and processing of nanowires and nanowire heterostructures using such methods as sol-gel and electrodeposition, focused-electron/ion-beam-induced deposition, epitaxial growth by chemical vapor transport, and more. Other sections cover engineering nanoporous anodic alumina, discuss magnetic and transport properties, domains, domain walls in nano-and microwires. and provide updates on skyrmions, domain walls, magnetism and transport, and the latest techniques to characterize and analyze these effects. Final sections cover applications, both current and emerging, and new chapters on memory, sensor, thermoelectric and nanorobotics applications. This book will be an ideal resource for academics and industry professionals working in the disciplines of materials science, physics, chemistry, electrical and electronic engineering and nanoscience.

Download or read book Metallic Films for Electronic Optical and Magnetic Applications written by Katayun Barmak and published by Woodhead Publishing. This book was released on 2014-02-13 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallic films play an important role in modern technologies such as integrated circuits, information storage, displays, sensors, and coatings. Metallic Films for Electronic, Optical and Magnetic Applications reviews the structure, processing and properties of metallic films. Part one explores the structure of metallic films using characterization methods such as x-ray diffraction and transmission electron microscopy. This part also encompasses the processing of metallic films, including structure formation during deposition and post-deposition reactions and phase transformations. Chapters in part two focus on the properties of metallic films, including mechanical, electrical, magnetic, optical, and thermal properties. Metallic Films for Electronic, Optical and Magnetic Applications is a technical resource for electronics components manufacturers, scientists, and engineers working in the semiconductor industry, product developers of sensors, displays, and other optoelectronic devices, and academics working in the field. - Explores the structure of metallic films using characterization methods such as x-ray diffraction and transmission electron microscopy - Discusses processing of metallic films, including structure formation during deposition and post-deposition reactions and phase transformations - Focuses on the properties of metallic films, including mechanical, electrical, magnetic, optical, and thermal properties

Download or read book Thermoelectrics written by N. M. Ravindra and published by Springer. This book was released on 2018-08-29 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a concise but comprehensive introduction to the fundamentals and current state of the art in thermoelectrics. Addressing an audience of materials scientists and engineers, the book covers theory, materials selection, and applications, with a wide variety of case studies reflecting the most up-to-date research approaches from the past decade, from single crystal to polycrystalline form and from bulk to thin films to nano dimensions. The world is facing major challenges for finding alternate energy sources that can satisfy the increasing demand for energy consumption while preserving the environment. The field of thermoelectrics has long been recognized as a potential and ideal source of clean energy. However, the relatively low conversion efficiency of thermoelectric devices has prevented their utility on a large scale. While addressing the need for thermal management in materials, device components, and systems, thermoelectrics provides a fundamental solution to waste heat recovery and temperature control. This book summarizes the global efforts that have been made to enhance the figure of merit of various thermoelectric materials by choosing appropriate processes and their influence on properties and performance. Because of these advances, today, thermoelectric devices are found in mainstream applications such as automobiles and power generators, as opposed to just a few years ago when they could only be used in niche applications such as in aeronautics, infrared imaging, and space. However, the continued gap between fundamental theoretical results and actual experimental data of figure of merit and performance continues to challenge the commercial applications of thermoelectrics. This book presents both recent achievements and continuing challenges, and represents essential reading for researchers working in this area in universities, industry, and national labs.

Download or read book Smithells Metals Reference Book written by William F. Gale and published by Elsevier. This book was released on 2003-12-09 with total page 2072 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smithells is the only single volume work which provides data on all key apsects of metallic materials.Smithells has been in continuous publication for over 50 years. This 8th Edition represents a major revision.Four new chapters have been added for this edition. these focus on; * Non conventional and emerging materials - metallic foams, amorphous metals (including bulk metallic glasses), structural intermetallic compounds and micr/nano-scale materials. * Techniques for the modelling and simulation of metallic materials. * Supporting technologies for the processing of metals and alloys.* An Extensive bibliography of selected sources of further metallurgical information, including books, journals, conference series, professional societies, metallurgical databases and specialist search tools.* One of the best known and most trusted sources of reference since its first publication more than 50 years ago* The only single volume containing all the data needed by researchers and professional metallurgists* Fully updated to the latest revisions of international standards

Download or read book Encyclopedia of the Alkaline Earth Compounds written by Richard C. Ropp and published by Newnes. This book was released on 2012-12-31 with total page 1201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of the Alkaline Earth Compounds is a compilation describing the physical and chemical properties of all of the alkaline earth compounds that have been elucidated to date in the scientific literature. These compounds are used in applications such as LEDs and electronic devices such as smart phones and tablet computers. Preparation methods for each compound are presented to show which techniques have been successful. Structures and phase diagrams are presented where applicable to aid in understanding the complexities of the topics discussed. With concise descriptions presenting the chemical, physical and electrical properties of any given compound, this subject matter will serve as an introduction to the field. This compendium is vital for students and scientific researchers in all fields of scientific endeavors, including non-chemists. 2013 Honorable Mention in Chemistry & Physics from the Association of American Publishers' PROSE Awards Presents a systematic coverage of all known alkaline earth inorganic compounds and their properties Provides a clear, consistent presentation based on groups facilitatating easy comparisons Includes the structure of all the compounds in high quality full-color graphics Summarizes all currently known properties of the transition metals compounds Lists the uses and applications of these compounds in electronics, energy, and catalysis

Download or read book Investigation on SiGe Selective Epitaxy for Source and Drain Engineering in 22 nm CMOS Technology Node and Beyond written by Guilei Wang and published by Springer Nature. This book was released on 2019-09-20 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents the SiGe source and drain (S/D) technology in the context of advanced CMOS, and addresses both device processing and epitaxy modelling. As the CMOS technology roadmap calls for continuously downscaling traditional transistor structures, controlling the parasitic effects of transistors, e.g. short channel effect, parasitic resistances and capacitances is becoming increasingly difficult. The emergence of these problems sparked a technological revolution, where a transition from planar to three-dimensional (3D) transistor design occurred in the 22nm technology node. The selective epitaxial growth (SEG) method has been used to deposit SiGe as stressor material in S/D regions to induce uniaxial strain in the channel region. The thesis investigates issues of process integration in IC production and concentrates on the key parameters of high-quality SiGe selective epitaxial growth, with a special focus on its pattern dependency behavior and on key integration issues in both 2D and 3D transistor structures, the goal being to improve future applications of SiGe SEG in advanced CMOS.

Download or read book Flash Lamp Annealing written by Lars Rebohle and published by . This book was released on 2019 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive survey of the technology of flash lamp annealing (FLA) for thermal processing of semiconductors. It gives a detailed introduction to the FLA technology and its physical background. Advantages, drawbacks and process issues are addressed in detail and allow the reader to properly plan and perform their own thermal processing. Moreover, this books gives a broad overview of the applications of flash lamp annealing, including a comprehensive literature survey. Several case studies of simulated temperature profiles in real material systems give the reader the necessary insight into the underlying physics and simulations. This book is a valuable reference work for both novice and advanced users.

Download or read book Nanowire Field Effect Transistors Principles and Applications written by Dae Mann Kim and published by Springer Science & Business Media. This book was released on 2013-10-23 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Nanowire Field Effect Transistor: Basic Principles and Applications” places an emphasis on the application aspects of nanowire field effect transistors (NWFET). Device physics and electronics are discussed in a compact manner, together with the p-n junction diode and MOSFET, the former as an essential element in NWFET and the latter as a general background of the FET. During this discussion, the photo-diode, solar cell, LED, LD, DRAM, flash EEPROM and sensors are highlighted to pave the way for similar applications of NWFET. Modeling is discussed in close analogy and comparison with MOSFETs. Contributors focus on processing, electrostatic discharge (ESD) and application of NWFET. This includes coverage of solar and memory cells, biological and chemical sensors, displays and atomic scale light emitting diodes. Appropriate for scientists and engineers interested in acquiring a working knowledge of NWFET as well as graduate students specializing in this subject.

Download or read book Photodiodes written by Jeong Woo Park and published by BoD – Books on Demand. This book was released on 2011-07-29 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photodiodes or photodetectors are in one boat with our human race. Efforts of people in related fields are contained in this book. This book would be valuable to those who want to obtain knowledge and inspiration in the related area.

Download or read book Synthesis of Nanomaterials written by S. Noor Mohammad and published by Springer Nature. This book was released on 2020-10-27 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the synthesis of nanomaterials with a strong focus on the underlying reaction kinetics and various synthesis mechanisms. It gives a detailed description of all major synthesis routes of many types of novel nanomaterials including nanowires, carbon nanotubes, semiconductor nanotubes, carbon nanobelts, nanofibers, nanorings, nanodots and quantum dots. In addition, it articulates the fundamental mechanisms of nanomaterials synthesis via vapor-phase, liquid-phase and solid-phase processes, highlighting the various strengths and weaknesses of each mechanism. This monograph provides the reader with a thorough review of the known state-of-the-art, along with a detailed comparison and analysis of all possible nanomaterials synthesis mechanisms. An important element of the book is how to obtain critical knowledge for controlling the morphology of nanomaterials and thereby fine tune their materials properties. The book is an ideal guide for graduate students and researchers new to the field seeking to establish or enhance their understanding of the physical and chemical fundamentals of nanomaterials synthesis mechanisms.

Download or read book High Energy Ball Milling written by Małgorzata Sopicka-Lizer and published by Elsevier. This book was released on 2010-05-24 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanochemical processing is a novel and cost effective method of producing a wide range of nanopowders. It involves the use of a high energy ball mill to initiate chemical reactions and structural changes. High energy ball milling: Mechanochemical processing of nanopowders reviews the latest techniques in mechanochemistry and how they can be applied to the synthesis and processing of various high-tech materials.Part one discusses the basic science of mechanochemistry with chapters on such topics as the mechanism and kinetics of mechanochemical processes, kinetic behaviour in mechanochemically-induced structural and chemical transformations and materials design through mechanochemical processing. Part two reviews mechanochemical treatment of different materials including synthesis of complex ceramic oxides, production of intermetallic compound powders, synthesis of organic compounds, synthesis of metallic-ceramic composite powders and activation of covalent bond-based materials. Part three covers mechanochemical processes in metal powder systems and other applications with coverage of topics such as plating and surface modification using ultrasonic vibrations, activated powders as precursors for spark plasma sintering, titanium dioxide photocatalyst synthesis by mechanochemical doping and synthesis of materials for lithium-ion batteries.With its distinguished editor and international team of contributors, High energy ball milling: Mechanochemical processing of nanopowders is a standard reference for all those involved in the production of ceramic and metallic components using sintering and other powder metallurgy techniques to produce net shape components. - Examines the latest techniques in mechanochemistry and how they can be applied to the synthesis and processing of various high-tech materials - Discusses the basic science of mechanochemistry including kinetic behaviour, processes and mechanisms and materials design through mechanochemical processing - Reviews mechanochemical treatment of different materials including synthesis of ceramic oxides, organic compounds and metallic-ceramic composite powders

Download or read book Semiconductor On Insulator Materials for Nanoelectronics Applications written by Alexei Nazarov and published by Springer Science & Business Media. This book was released on 2011-03-03 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Semiconductor-On-Insulator Materials for NanoElectronics Applications” is devoted to the fast evolving field of modern nanoelectronics, and more particularly to the physics and technology of nanoelectronic devices built on semiconductor-on-insulator (SemOI) systems. The book contains the achievements in this field from leading companies and universities in Europe, USA, Brazil and Russia. It is articulated around four main topics: 1. New semiconductor-on-insulator materials; 2. Physics of modern SemOI devices; 3. Advanced characterization of SemOI devices; 4. Sensors and MEMS on SOI. "Semiconductor-On-Insulator Materials for NanoElectonics Applications” is useful not only to specialists in nano- and microelectronics but also to students and to the wider audience of readers who are interested in new directions in modern electronics and optoelectronics.