Download or read book Signal Processing for Optical Performance Monitoring and Impairment Mitigation written by Wei Chen and published by . This book was released on 2006 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Enabling Technologies for High Spectral efficiency Coherent Optical Communication Networks written by Xiang Zhou and published by John Wiley & Sons. This book was released on 2016-04-29 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enabling Technologies for High Spectral-efficiency Coherent Optical Communication Networks Presents the technological advancements that enable high spectral-efficiency and high-capacity fiber-optic communication systems and networks This book examines key technology advances in high spectral-efficiency fiber-optic communication systems and networks, enabled by the use of coherent detection and digital signal processing (DSP). The first of this book’s 16 chapters is a detailed introduction. Chapter 2 reviews the modulation formats, while Chapter 3 focuses on detection and error correction technologies for coherent optical communication systems. Chapters 4 and 5 are devoted to Nyquist-WDM and orthogonal frequency-division multiplexing (OFDM). In chapter 6, polarization and nonlinear impairments in coherent optical communication systems are discussed. The fiber nonlinear effects in a non-dispersion-managed system are covered in chapter 7. Chapter 8 describes linear impairment equalization and Chapter 9 discusses various nonlinear mitigation techniques. Signal synchronization is covered in Chapters 10 and 11. Chapter 12 describes the main constraints put on the DSP algorithms by the hardware structure. Chapter 13 addresses the fundamental concepts and recent progress of photonic integration. Optical performance monitoring and elastic optical network technology are the subjects of Chapters 14 and 15. Finally, Chapter 16 discusses spatial-division multiplexing and MIMO processing technology, a potential solution to solve the capacity limit of single-mode fibers. Contains basic theories and up-to-date technology advancements in each chapter Describes how capacity-approaching coding schemes based on low-density parity check (LDPC) and spatially coupled LDPC codes can be constructed by combining iterative demodulation and decoding Demonstrates that fiber nonlinearities can be accurately described by some analytical models, such as GN-EGN model Presents impairment equalization and mitigation techniques Enabling Technologies for High Spectral-efficiency Coherent Optical Communication Networks is a reference for researchers, engineers, and graduate students.
Download or read book Improving Optical Performance Monitoring with Signal Processing written by Mei Li and published by . This book was released on 2008 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Signal Processing For High speed Optical Communication written by Jianjun Yu and published by World Scientific Publishing Company. This book was released on 2018-03-09 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is an increasing tendency to integrate optical communication with wireless communication to satisfy continuously emerging (new) data communication demands. Thus, optical-wireless-integrated access networks and transmission systems, as well as LED-based visible light communication are attracting ever increasing research interest. Digital signal processing (DSP) is one new technology for optical transmission. As such this book is designed to pave the way to the better understanding of the deployment of DSP in optical fiber communication systems.Digital Signal Processing for High-Speed Optical Communication covers a wide area of DSP topics in optical communications, and describes state-of-the-art digital signal processing techniques for high-speed optical communication. In this book, numerous advanced digital signal processing techniques aiming at the promotion of the capacity increase and performance improvement of optical or optical-wireless communication systems and networks are presented and explained. Coverage includes new technologies, optical filter with MLSE, and new pre-coding and pre-equalization applicable to single-carrier and multi-carrier, direct-detection and coherent-detection optical commutation systems and networks.
Download or read book Optical Performance Monitoring written by Calvin C. K. Chan and published by Academic Press. This book was released on 2010-02-11 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This in-depth, detailed reference presents for the first time a comprehensive treatment of recent advances in optical performance monitoring. Written by leading experts in the field, the book provides an overview of recent developments in the area and the role of OPM in future optical systems and networks. Detailed discussions of various advanced techniques are provided to illustrate their principles. FEATURES: Presents the principles and applications of advanced OPM techniques, together with a comparative evaluation of their effectiveness in monitoring individual parameters, such as optical signal-to-noise ratio, chromatic dispersion, and polarization mode dispersion Explains the principles of the various advanced optical signal processing techniques and their applications in OPM Examines the role and applications of OPM in optical networks, including optical transport networks, coherent optical systems, and long-haul optical transmission systems Discusses the current approaches of OPM in the global standard SDH/SONET This book is ideal for technical professionals and researchers who want to understand and evaluate advanced techniques in OPM and their impact on the practical design of next-generation optical systems and networks. Provides a thorough and detailed discussion of the latest optical performance monitoring (OPM) techniques and their applications, presenting a comparative analysis of each method Contains high-quality technical contributions from leading experts, covering both principles and practical aspects of advanced OPM techniques Addresses challenges and opportunities related to OPM in next-generation reconfigurable optical systems and networks
Download or read book Signal Processing Techniques for Optical Performance Monitoring in Dynamic Fiber optic Networks written by Faisal Nadeem Khan and published by . This book was released on 2011 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Signal Processing for Cancellation of Fiber Optic Impairments written by Zainab Faydh Mohammed and published by LAP Lambert Academic Publishing. This book was released on 2013 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: High bit rates optical communication systems pose the challenge of their tolerance to linear and nonlinear fiber impairments. Recently, the use of electronic processing for the mitigation of signal distortion in optical communication has attracted increasing interest due to its low cost and size relative to alternative optical techniques and the potential for the integration of electronic processors with existing transceiver electronics. In this book 40 Gb/s DP-QPSK system with coherent reception and DSP unit for optical fiber impairments compensation is proposed . The Chromatic Dispersion is compensated using a simple transversal digital filter and Polarization Mode Dispersion is compensated using adaptive butterfly equalizer. A nonlinear compensator is used for compensating the nonlinear effects. A modified Viterbi-and-Viterbi algorithm is then used to compensate for phase and frequency mismatch between the transmitter and local oscillator .This book should be useful for researchers work on development of optical communication systems and especially who works on DSP algorithms or anyone else who may be interested in optical fiber technology.
Download or read book Chapter Digital Signal Processing for Optical Communications and Networks written by Tianhua Xu and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The achievable information rates of optical communication networks have been widely increased over the past four decades with the introduction and development of optical amplifiers, coherent detection, advanced modulation formats, and digital signal processing techniques. These developments promoted the revolution of optical communication systems and the growth of Internet, towards the direction of high-capacity and long-distance transmissions. The performance of long-haul high-capacity optical fiber communication systems is significantly degraded by transmission impairments, such as chromatic dispersion, polarization mode dispersion, laser phase noise and Kerr fiber nonlinearities. With the entire capture of the amplitude and phase of the signals using coherent optical detection, the powerful compensation and effective mitigation of the transmission impairments can be implemented using the digital signal processing in electrical domain. This becomes one of the most promising techniques for next-generation optical communication networks to achieve a performance close to the Shannon capacity limit. This chapter will focus on the introduction and investigation of digital signal processing employed for channel impairments compensation based on the coherent detection of optical signals, to provide a roadmap for the design and implementation of real-time optical fiber communication systems.
Download or read book Digital Signal Processing for Optical Communications and Networks written by Tianhua Xu and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The achievable information rates of optical communication networks have been widely increased over the past four decades with the introduction and development of optical amplifiers, coherent detection, advanced modulation formats, and digital signal processing techniques. These developments promoted the revolution of optical communication systems and the growth of Internet, towards the direction of high-capacity and long-distance transmissions. The performance of long-haul high-capacity optical fiber communication systems is significantly degraded by transmission impairments, such as chromatic dispersion, polarization mode dispersion, laser phase noise and Kerr fiber nonlinearities. With the entire capture of the amplitude and phase of the signals using coherent optical detection, the powerful compensation and effective mitigation of the transmission impairments can be implemented using the digital signal processing in electrical domain. This becomes one of the most promising techniques for next-generation optical communication networks to achieve a performance close to the Shannon capacity limit. This chapter will focus on the introduction and investigation of digital signal processing employed for channel impairments compensation based on the coherent detection of optical signals, to provide a roadmap for the design and implementation of real-time optical fiber communication systems.
Download or read book Optical Signal Processing by Silicon Photonics written by Jameel Ahmed and published by Springer Science & Business Media. This book was released on 2013-09-14 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this book is to make respective graduate students understand the nonlinear effects inside SOI waveguide and possible applications of SOI waveguides in this emerging research area of optical fibre communication. This book focuses on achieving successful optical frequency shifting by Four Wave Mixing (FWM) in silicon-on-insulator (SOI) waveguide by exploiting a nonlinear phenomenon.
Download or read book All Optical Signal Processing written by Stefan Wabnitz and published by Springer. This book was released on 2015-04-11 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive review of the state-of-the art of optical signal processing technologies and devices. It presents breakthrough solutions for enabling a pervasive use of optics in data communication and signal storage applications. It presents presents optical signal processing as solution to overcome the capacity crunch in communication networks. The book content ranges from the development of innovative materials and devices, such as graphene and slow light structures, to the use of nonlinear optics for secure quantum information processing and overcoming the classical Shannon limit on channel capacity and microwave signal processing. Although it holds the promise for a substantial speed improvement, today’s communication infrastructure optics remains largely confined to the signal transport layer, as it lags behind electronics as far as signal processing is concerned. This situation will change in the near future as the tremendous growth of data traffic requires energy efficient and fully transparent all-optical networks. The book is written by leaders in the field.
Download or read book Multi impairment and Multi channel Optical Performance Monitoring written by L. Meflah and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Next generation optical networks will evolve from static to dynamically reconfigurable architectures to meet the increasing bandwidth and service requirements. The benefits of dynamically reconfigurable networks (improved operations, reduced footprint and cost) have introduced new challenges, in particular the need for complex management which has put pressure on the engineering rules and transmission margins. This has provided the main drive to develop new techniques for optical performance monitoring (OPM) without using optical-to-electrical-to-optical conversions. When considering impairments due to chromatic dispersion in dynamic networks, each channel will traverse a unique path through the network thus the channels arriving at the monitoring point will, in general, exhibit different amounts of residual dispersion. Therefore, in a dynamic network it is necessary to monitor all channels individually to quantify the degradation, without the requirement of knowing the data path history. The monitoring feature can be used in conjunction with a dispersion compensation device which can either be optical or electrical or used to trigger real-time alarms for traffic re-routing. The proposed OPM technique is based on RF spectrum analysis and used for simultaneous and independent monitoring of power, chromatic dispersion (CD), polarisation mode dispersion (PMD) and optical signal-to-noise ratio (OSNR) in 40Gbit/s multi0channel systems. An analytical model is developed to describe the monitoring technique which allows the prediction of the measurement range. The experimental results are given for group velocity dispersion (GVD), differential group delay (DGD) and OSNR measurements. This technique is based on electro-optic down-conversion that simultaneously down-converts multiple channels, sharing the cost of the key components over multiple channels and making it cost effective for multi-channel operation. The measurement range achieved with this method is equal to 4742±100ps/nm for GVD, 200±4ps for DGD and 25±1dB for OSNR. To the knowledge of the author, these dispersion monitoring ranges are the largest reported to date for the bit-rate of 40Gbit/s with amplitude modulation formats.
Download or read book Signal Processing Techniques for Optical Wireless Communication Systems written by Ali Waqar Azim and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The radio-frequency (RF) spectrum is dwindling due to an increase in the demand of wireless applications. Hence, there is substantial demand of alternative spectrum regions for communications to recline the conventional RF spectrum. In this context, optical wireless communications (OWC) is explored as a likely candidate to supplement the RF communications. The current work focuses on impairment mitigation techniques and energy-efficient modulation approaches for OWC. Firstly, the peak-to-average power ratio (PAPR) for optical-orthogonal frequency division multiplexing (O-OFDM) is studied and two decision-directed PAPR reduction techniques are presented. The complexity of these methods is comparatively lower than other PAPR reduction methods, whilst, their performance is likewise analogous with other alternatives. Secondly, an optical-single-carrier frequency division multiple access (O-SCFDMA) approach, referred to as Hermitain symmetry free O-SCFDMA (HSFO-SCFDMA) is proposed, that averts Hermiatian symmetry which is normally expected for other O-OFDM and O-SCFDMA approaches. The simulation results affirm that HSFO-SCFDMA is more efficient than any other O-SCFDMA approach for OWC and manifests the lowest PAPR among the other alternatives. Thirdly, the performance of precoding is analyzed for layered asymmetrically clipped O-OFDM (LACO-OFDM). Two types of precoding are employed, i.e., Fourier transform precoding and Hartley transform precoding. It is established that Hartley transform precoded LACO-OFDM exhibits the lowest PAPR and is less vulnerable to non-linear distortion introduced by the light emitting diodes (LEDs), howbeit, the signal-to-noise ratio (SNR) increase (both electrical and optical) owing to the layered structure is higher than conventional LACO-OFDM.
Download or read book Digital Signal Processing for High Speed Optical Communication written by Jianjun Yu and published by . This book was released on 2018 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Signal Processing written by Joseph Horner and published by Elsevier. This book was released on 2012-12-02 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical Signal Processing is a collection of synopses of the works of many experts in the different fields of optical signal processing. The book also includes systems or algorithms that have been successfully tried and used. The monograph is divided into seven parts. Part I discusses color image processing and white-light Fourier transformations, while Part II covers topics related to pattern recognition such as optical feature extraction and unconventional correlators. Part III deals with temporal signal processing and its related optical architectures, acoustooptic synthetic aperture radar processors, and acoustooptic signal processors. Part IV tackles nonlinear optical processors and waveguide devices. Part V discusses optical and tomographic transformation. Part VI deals with optical numeric processing, optical linear algebra processors, and related algorithm and software. Part VII talks about devices and components and their applications such as fiber-optic delay-line signal processors and spatial light modulators. The text is recommended for engineers and scientists in the field of optical signal processing, especially those who would like to know more of its advancements.
Download or read book Post Detection Signal Processing for Optical Fiber Communication Impairments written by Gilad Katz and published by . This book was released on 2007 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Performance Monitoring in All Optical Networks written by Yannis Benlachtar and published by LAP Lambert Academic Publishing. This book was released on 2010-09 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis investigates advanced optical performance monitoring approaches for future all-optical networks using the synchronous sampling technique. This allows for improved signal quality estimation, fault management and resource allocation through improved control of transmission at the physical layer level. Because of the increased transparency in next generation networks, it is not possible to verify the quality of the signal at each node because of the limited number of optical-electrical-optical conversions, and therefore new non-intrusive mechanisms to achieve signal quality monitoring are needed. The novel synchronous sampling technique can be deployed to estimate the bit error rate, considered an important quality measure, and hence can be utilised to certify service level agreements between operators and customers. This method also has fault identification capabilities by analysing the shapes of the obtained histograms. Each impairment affects the histogram in a specific way, giving it a unique shape that can be used for root cause analysis.