Download or read book Signal Processing and Integrated Circuits written by Hussein Baher and published by John Wiley & Sons. This book was released on 2012-04-23 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a balanced account of analog, digital and mixed-mode signal processing with applications in telecommunications. Part I Perspective gives an overview of the areas of Systems on a Chip (Soc) and mobile communication which are used to demonstrate the complementary relationship between analog and digital systems. Part II Analog (continuous-time) and Digital Signal Processing contains both fundamental and advanced analysis, and design techniques, of analog and digital systems. This includes analog and digital filter design; fast Fourier transform (FFT) algorithms; stochastic signals; linear estimation and adaptive filters. Part III Analog MOS Integrated Circuits for Signal Processing covers basic MOS transistor operation and fabrication through to the design of complex integrated circuits such as high performance Op Amps, Operational Transconductance Amplifiers (OTA's) and Gm-C circuits. Part IV Switched-capacitor and Mixed-mode Signal Processing outlines the design of switched-capacitor filters, and concludes with sigma-delta data converters as an extensive application of analog and digital signal processing Contains the fundamentals and advanced techniques of continuous-time and discrete-time signal processing. Presents in detail the design of analog MOS integrated circuits for signal processing, with application to the design of switched-capacitor filters. Uses the comprehensive design of integrated sigma-delta data converters to illustrate and unify the techniques of signal processing. Includes solved examples, end of chapter problems and MATLAB® throughout the book, to help readers understand the mathematical complexities of signal processing. The treatment of the topic is at the senior undergraduate to graduate and professional levels, with sufficient introductory material for the book to be used as a self-contained reference.
Download or read book Integrated Circuits for Analog Signal Processing written by Esteban Tlelo-Cuautle and published by Springer Science & Business Media. This book was released on 2012-07-27 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents theory, design methods and novel applications for integrated circuits for analog signal processing. The discussion covers a wide variety of active devices, active elements and amplifiers, working in voltage mode, current mode and mixed mode. This includes voltage operational amplifiers, current operational amplifiers, operational transconductance amplifiers, operational transresistance amplifiers, current conveyors, current differencing transconductance amplifiers, etc. Design methods and challenges posed by nanometer technology are discussed and applications described, including signal amplification, filtering, data acquisition systems such as neural recording, sensor conditioning such as biomedical implants, actuator conditioning, noise generators, oscillators, mixers, etc. Presents analysis and synthesis methods to generate all circuit topologies from which the designer can select the best one for the desired application; Includes design guidelines for active devices/elements with low voltage and low power constraints; Offers guidelines for selecting the right active devices/elements in the design of linear and nonlinear circuits; Discusses optimization of the active devices/elements for process and manufacturing issues of nanometer technology.
Download or read book DSP Integrated Circuits written by Lars Wanhammar and published by Elsevier. This book was released on 1999-02-24 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: DSP Integrated Circuits establishes the essential interface between theory of digital signal processing algorithms and their implementation in full-custom CMOS technology. With an emphasis on techniques for co-design of DSP algorithms and hardware in order to achieve high performance in terms of throughput, low power consumption, and design effort, this book provides the professional engineer, researcher, and student with a firm foundation in the theoretical as well as the practical aspects of designing high performance DSP integrated circuits. Centered around three design case studies, DSP Integrated Circuits thoroughly details a high-performance FFT processor, a 2-D Discrete Cosine Transform for HDTV, and a wave digital filter for interpolation of the sampling frequency. The case studies cover the essential parts of the design process in a top-down manner, from specification of algorithm design and optimization, scheduling of operations, synthesis of optimal architectures, realization of processing elements, to the floor-planning of the integrated circuit. Details the theory and design of digital filters - particularly wave digital filters, multi-rate digital filters, fast Fourier transforms (FFT's), and discrete cosine transforms (DCT's) Follows three complete "real-world" case studies throughout the book Provides complete coverage of finite word length effects in DSP algorithms In-depth survey of the computational properties of DSP algorithms and their mapping to optimal architectures Outlines DSP architectures and parallel, bit-serial, and distributed arithmetic Presents the design process in a top-down manner and incorporates numerous problems and solutions
Download or read book EMC of Analog Integrated Circuits written by Jean-Michel Redouté and published by Springer Science & Business Media. This book was released on 2009-10-10 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental electromagnetic pollution has drastically increased over the last decades. The omnipresence of communication systems, various electronic appliances and the use of ever increasing frequencies, all contribute to a noisy electromagnetic environment which acts detrimentally on sensitive electronic equipment. Integrated circuits must be able to operate satisfactorily while cohabiting harmoniously in the same appliance, and not generate intolerable levels of electromagnetic emission, while maintaining a sound immunity to potential electromagnetic disturbances: analog integrated circuits are in particular more easily disturbed than their digital counterparts, since they don't have the benefit of dealing with predefined levels ensuring an innate immunity to disturbances. The objective of the research domain presented in EMC of Analog Integrated Circuits is to improve the electromagnetic immunity of considered analog integrated circuits, so that they start to fail at relevantly higher conduction levels than before.
Download or read book Radiation Hardened CMOS Integrated Circuits for Time Based Signal Processing written by Jeffrey Prinzie and published by Springer. This book was released on 2018-04-26 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-art techniques for radiation hardened high-resolution Time-to-Digital converters and low noise frequency synthesizers. Throughout the book, advanced degradation mechanisms and error sources are discussed and several ways to prevent such errors are presented. An overview of the prerequisite physics of nuclear interactions is given that has been compiled in an easy to understand chapter. The book is structured in a way that different hardening techniques and solutions are supported by theory and experimental data with their various tradeoffs. Based on leading-edge research, conducted in collaboration between KU Leuven and CERN, the European Center for Nuclear Research Describes in detail advanced techniques to harden circuits against ionizing radiation Provides a practical way to learn and understand radiation effects in time-based circuits Includes an introduction to the underlying physics, circuit design, and advanced techniques accompanied with experimental data
Download or read book Analog IC Design Techniques for Nanopower Biomedical Signal Processing written by Chutham Sawigun and published by River Publishers. This book was released on 2016-05-31 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the requirements for low power consumption and very small physical dimensions in portable, wearable and implantable medical devices are calling for integrated circuit design techniques using MOSFETs operating in the subthreshold regime, this book first revisits some well-known circuit techniques that use CMOS devices biased in subthreshold in order to establish nanopower integrated circuit designs. Based on the these findings, this book shows the development of a class-AB current-mode sample-and-hold circuit with an order of magnitude improvement in its figure of merit compared to other state-of-the-art designs. Also, the concepts and design procedures of 1) single-branch filters 2) follower-integrator-based lowpass filters and 3) modular transconductance reduction techniques for very low frequency filters are presented. Finally, to serve the requirement of a very large signal swing in an energy-based action potential detector, a nanopower class-AB current-mode analog multiplier is designed to handle input current amplitudes of more than 10 times the bias current of the multiplier circuit. The invented filter circuits have been fabricated in a standard 0.18 µ CMOS process in order to verify our circuit concepts and design procedures. Their experimental results are reported.
Download or read book Signal Processing and Analysis of Electrical Circuit written by Adam Glowacz and published by MDPI. This book was released on 2020-03-13 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue with 35 published articles shows the significance of the topic “Signal Processing and Analysis of Electrical Circuit”. This topic has been gaining increasing attention in recent times. The presented articles can be categorized into four different areas: signal processing and analysis methods of electrical circuits; electrical measurement technology; applications of signal processing of electrical equipment; fault diagnosis of electrical circuits. It is a fact that the development of electrical systems, signal processing methods, and circuits has been accelerating. Electronics applications related to electrical circuits and signal processing methods have gained noticeable attention in recent times. The methods of signal processing and electrical circuits are widely used by engineers and scientists all over the world. The constituent papers represent a significant contribution to electronics and present applications that can be used in industry. Further improvements to the presented approaches are required for realizing their full potential.
Download or read book Applied Signal Processing written by Nadder Hamdy and published by CRC Press. This book was released on 2008-07-25 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Classical signal processing techniques are based primarily on the analog nature of all signals. However, the continuously improving performance of digital circuitry and processors has prompted a switch to digital signal processing techniques rather than the traditional analog ones. Applied Signal Processing recognizes the linkage between
Download or read book Precision Instrumentation Amplifiers and Read Out Integrated Circuits written by Rong Wu and published by Springer Science & Business Media. This book was released on 2012-07-25 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents innovative solutions in the design of precision instrumentation amplifier and read-out ICs, which can be used to boost millivolt-level signals transmitted by modern sensors, to levels compatible with the input ranges of typical Analog-to-Digital Converters (ADCs). The discussion includes the theory, design and realization of interface electronics for bridge transducers and thermocouples. It describes the use of power efficient techniques to mitigate low frequency errors, resulting in interface electronics with high accuracy, low noise and low drift. Since this book is mainly about techniques for eliminating low frequency errors, it describes the nature of these errors and the associated dynamic offset cancellation techniques used to mitigate them.
Download or read book Analog Signal Processing written by Peter B. Aronhime and published by Springer Science & Business Media. This book was released on 2013-04-09 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog Signal Processing brings together in one place important contributions and state-of-the-art research results in this rapidly advancing area. Analog Signal Processing serves as an excellent reference, providing insight into some of the most important issues in the field.
Download or read book ANALOG MOS INTEGRATED CIRCUITS FOR SIGNAL PROCESSING written by Roubik Gregorian and published by . This book was released on 2008-09-01 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Market_Desc: · Engineers· Managers· Technicians About The Book: The book describes the operating principles of analog MOS integrated circuits and how to design and use such circuits. The initial section explores general properties of analog MOS integrated circuits and the math and physics background required. The remainder of the book is devoted to the design of circuits. It includes such devices as switched-capacitor filters, analog-to-digital and digital-to-analog converters, amplifiers, modulators, oscillators, and others. Tables and numerical design examples clarify the step-by-step processes involved. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department.
Download or read book Analog MOS Integrated Circuits for Signal Processing written by Roubik Gregorian and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book VLSI Signal Processing Technology written by Magdy Bayoumi and published by Springer Science & Business Media. This book was released on 1994-10-31 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first in a set of forthcoming books focussed on state-of-the-art development in the VLSI Signal Processing area. It is a response to the tremendous research activities taking place in that field. These activities have been driven by two factors: the dramatic increase in demand for high speed signal processing, especially in consumer elec tronics, and the evolving microelectronic technologies. The available technology has always been one of the main factors in determining al gorithms, architectures, and design strategies to be followed. With every new technology, signal processing systems go through many changes in concepts, design methods, and implementation. The goal of this book is to introduce the reader to the main features of VLSI Signal Processing and the ongoing developments in this area. The focus of this book is on: • Current developments in Digital Signal Processing (DSP) pro cessors and architectures - several examples and case studies of existing DSP chips are discussed in Chapter 1. • Features and requirements of image and video signal processing architectures - both applications specific integrated circuits (ASICs) and programmable image processors are studied in Chapter 2. • New market areas for signal processing - especially in consumer electronics such as multimedia, teleconferencing, and movie on demand. • Impact of arithmetic circuitry on the performance of DSP pro cessors - several topics are discussed in Chapter 3 such as: number representation, arithmetic algorithms and circuits, and implementa tion.
Download or read book Analog Electronics written by David Crecraft and published by Elsevier. This book was released on 2002-05-21 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: The content has been carefully designed to meet the requirements of first and second year students of electronic engineering, communications engineering and telecommunications, following full honours degree programs or two-year courses including HNC/HND. A completely new analog electronics textbook for the digital age Coverage ideal for courses with a communications / wireless focus
Download or read book Integrated Circuits for Analog Signal Processing written by Esteban Tlelo-Cuautle and published by Springer. This book was released on 2014-08-08 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents theory, design methods and novel applications for integrated circuits for analog signal processing. The discussion covers a wide variety of active devices, active elements and amplifiers, working in voltage mode, current mode and mixed mode. This includes voltage operational amplifiers, current operational amplifiers, operational transconductance amplifiers, operational transresistance amplifiers, current conveyors, current differencing transconductance amplifiers, etc. Design methods and challenges posed by nanometer technology are discussed and applications described, including signal amplification, filtering, data acquisition systems such as neural recording, sensor conditioning such as biomedical implants, actuator conditioning, noise generators, oscillators, mixers, etc. Presents analysis and synthesis methods to generate all circuit topologies from which the designer can select the best one for the desired application; Includes design guidelines for active devices/elements with low voltage and low power constraints; Offers guidelines for selecting the right active devices/elements in the design of linear and nonlinear circuits; Discusses optimization of the active devices/elements for process and manufacturing issues of nanometer technology.
Download or read book Ultra Low Power Integrated Circuit Design written by Nianxiong Nick Tan and published by Springer Science & Business Media. This book was released on 2013-10-23 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the design of CMOS circuits for ultra-low power consumption including analog, radio frequency (RF), and digital signal processing circuits (DSP). The book addresses issues from circuit and system design to production design, and applies the ultra-low power circuits described to systems for digital hearing aids and capsule endoscope devices. Provides a valuable introduction to ultra-low power circuit design, aimed at practicing design engineers; Describes all key building blocks of ultra-low power circuits, from a systems perspective; Applies circuits and systems described to real product examples such as hearing aids and capsule endoscopes.
Download or read book Switched Current Signal Processing and A D Conversion Circuits written by Bengt E. Jonsson and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Switched-Current Signal Processing and A/D Conversion Circuits: Design and Implementation describes the design and implementation of switched-current (SI) circuits with emphasis on signal processing and data-conversion applications. The work includes theoretical analysis, high-level and circuit-level simulation results as well as measurement results from a few of the author's circuit implementations. An extensive overview of the SI field of research is also given. The book contains an extensive overview of the switched-current field of research, and can therefore be used as a quick-reference to the field. The description of each design example has been organized to describe the entire design flow from system level design and simulation, to circuit simulation, layout and measurement as accurately as possible. Thus it is possible to follow each step in the design process. Switched-Current Signal Processing and A/D Conversion Circuits: Design and Implementation is an invaluable reference for researchers and circuit designers working with one-chip mixed-signal system solutions, and low-voltage analog CMOS design. It will also be appreciated by anyone requiring a quick overview of what has been done in the SI field.
