Download or read book Signal Integrity Analysis of Transmission Lines Backed by Electromagnetic Bandgap Structures in High speed Systems written by Jin Chen and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Transmission Lines in Digital and Analog Electronic Systems written by Clayton R. Paul and published by John Wiley & Sons. This book was released on 2011-01-11 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last 30 years there have been dramatic changes in electrical technology--yet the length of the undergraduate curriculum has remained four years. Until some ten years ago, the analysis of transmission lines was a standard topic in the EE and CpE undergraduate curricula. Today most of the undergraduate curricula contain a rather brief study of the analysis of transmission lines in a one-semester junior-level course on electromagnetics. In some schools, this study of transmission lines is relegated to a senior technical elective or has disappeared from the curriculum altogether. This raises a serious problem in the preparation of EE and CpE undergraduates to be competent in the modern industrial world. For the reasons mentioned above, today's undergraduates lack the basic skills to design high-speed digital and high-frequency analog systems. It does little good to write sophisticated software if the hardware is unable to process the instructions. This problem will increase as the speeds and frequencies of these systems continue to increase seemingly without bound. This book is meant to repair that basic deficiency.

Download or read book Transient Signals on Transmission Lines written by Andrew Peterson and published by Springer Nature. This book was released on 2023-12-05 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to transmission line effects in the time domain. Fundamentals including time of flight, impedance discontinuities, proper termination schemes, nonlinear and reactive loads, and crosstalk are considered. Required prerequisite knowledge is limited to conventional circuit theory. The material is tutorial for electrical and computer engineers on the topic of transient signals on transmission lines. Emphasis has been placed on aspects of the subject that have application to signal integrity and high-speed digital circuit design issues, including proper termination schemes to avoid impedance discontinuities, reactive and nonlinear loads, and an introduction to crosstalk. The coverage focuses on the very important topic of transmission line transients which have been de-emphasized in most current textbooks. This book is prepared to supplement traditional texts for advanced students studying electromagnetics and for a vast array of practicing electrical engineers, computer engineers and material scientists with interests in signal integrity and high-speed digital design. In this second edition, examples and new problems have been added throughout. A new chapter on differential transmission lines has also been incorporated

Download or read book Analysis of Transmission Lines Embedded in Power Distribution Networks Containing Electromagnetic Bandgap Structures written by Jeffrey Ho and published by . This book was released on 2005 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Electromagnetic bandgap (EBG) structures are known for their frequency selective characteristics. They are easily implemented in printed circuit board (PCB) technology and can be designed to induce wide stopbands. Due to this feature, the EBG structures are utilized in power distribution networks (PDNs) in order to provide global power/ground noise suppression. Signal integrity in transmission lines routed within such a modified PDN is investigated in this thesis. For this purpose, a lumped element circuit model is introduced that is portable to commercial circuit simulators. This model, which includes losses and frequency dependent parameters, is validated with full-wave simulations, time domain pulse response and scattering parameter measurements. As well, data transmission in such a line is inspected by simulation and measurement of the eye-diagrams. Subsequently, a system simulation is performed to show the integration of the model in a typical electronic circuit containing logic gates and drivers and to demonstrate a sample application of the noise suppression method. Alternative PDN geometries employing EBG structures are also introduced to decrease the cost and complexity of fabrication and to increase the frequency range of the stopband induced by the EBG." --

Download or read book Coplanar Waveguide Circuits Components and Systems written by Rainee N. Simons and published by John Wiley & Sons. This book was released on 2004-04-07 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up-to-date coverage of the analysis and applications of coplanar waveguides to microwave circuits and antennas The unique feature of coplanar waveguides, as opposed to more conventional waveguides, is their uniplanar construction, in which all of the conductors are aligned on the same side of the substrate. This feature simplifies manufacturing and allows faster and less expensive characterization using on-wafer techniques. Coplanar Waveguide Circuits, Components, and Systems is an engineer's complete resource, collecting all of the available data on the subject. Rainee Simons thoroughly discusses propagation parameters for conventional coplanar waveguides and includes valuable details such as the derivation of the fundamental equations, physical explanations, and numerical examples. Coverage also includes: Discontinuities and circuit elements Transitions to other transmission media Directional couplers, hybrids, and magic T Microelectromechanical systems based switches and phase shifters Tunable devices using ferroelectric materials Photonic bandgap structures Printed circuit antennas

Download or read book Power Integrity Modeling and Design for Semiconductors and Systems written by Madhavan Swaminathan and published by Prentice-Hall PTR. This book was released on 2008 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Madhavan Swaminathanreceived his B.E. in Electronics and Communication from Regional Engineering College, Tiruchirapalli in 1985 and his M.S. and Ph.D. degrees in Electrical Engineering from Syracuse University in 1989 and 1991, respectively. He is currently the Joseph M. Pettit Professor in Electronics in the School of Electrical and Computer Engineering and Deputy Director of the Packaging Research Center, Georgia Tech. He is also the cofounder of Jacket Micro Devices, a company specializing in RF modules for wireless applications. Prior to joining Georgia Tech he was with IBM where he worked on packaging for super computers. His work on Power Integrity has won several awards and he was made an IEEE Fellow for his contributions in this area. Ege Enginreceived his B.S. and M.S. degrees in electrical engineering from Middle East Technical University, Ankara, Turkey, and from University of Paderborn, Germany. From 2001 to 2004 he was with the Fraunhofer-Institute for Reliability and Microintegration in Berlin. During this time he also received his Ph.D. from the University of Hannover, Germany. He is currently a Research Engineer in the School of Electrical and Computer Engineering and an Assistant Research Director of the Packaging Research Center at Georgia Tech. He has more than 40 publications in refereed journals and conferences in the areas of signal and power integrity modeling and simulation. The First Comprehensive, Example-Rich Guide to Power Integrity Modeling Professionals need to thoroughly understand signal and power integrity issues in order to successfully design packages and boards for high-speed systems. Now, for the first time, there's a complete guide to power integrity modeling: everything you need to know, from the basics through the state of the art. Using realistic case studies and downloadable software examples, two leading experts demonstrate today's best techniques for designing and modeling interconnects to efficiently distribute power and minimize noise. The authors carefully introduce the core concepts of power distribution design, systematically present and compare leading techniques for modeling noise, and link these techniques to specific applications. Their many examples range from the simplest (using analytical equations to compute power supply noise) through complex system-level applications. The authors Introduce power delivery network components, analysis, high-frequency measurement, and modeling requirements Thoroughly explain plane modeling, including plane behavior, lumped modeling, distributed circuit-based approaches, and much more Offer in-depth coverage of simultaneous switching noise, including modeling for time- and frequency-domain analysis Introduce three leading time domain simulation methods: rational function methods, signal flow graphs, and MNA Present these and other advanced case studies: high-speed servers, high-speed differential signaling, chip package analysis, embedded decoupling capacitors, and electromagnetic bandgap structures This book's system-level focus and practical examples will make it indispensable for every professional concerned with power integrity, including electrical engineers, system designers, signal integrity engineers, and materials scientists. It will also be valuable to developers building software that takes advantage of high-speed systems. During my (M.S) undergraduate days in a little town called Tiruchirapalli in Southern India, we used to have frequent voltage and current surges that knocked out all the electrical equipment such as fans and lights in our rooms. Frustrated, my friend once remarked, "We are Powerless to solve the Current problem." Of course, he meant this in jest, but little did I realize that this would become the theme of my research for many years. Though my area is on Semiconductors and computer system

Download or read book Electromagnetic Bandgap EBG Structures written by Antonio Orlandi and published by John Wiley & Sons. This book was released on 2017-05-31 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential guide to the background, design, and application of common-mode filtering structures in modern high-speed differential communication links Written by a team of experts in the field, Electromagnetic Bandgap (EBG) Structures explores the practical electromagnetic bandgap based common mode filters for power integrity applications and covers the theoretical and practical design approaches for common mode filtering in high-speed printed circuit boards, especially for boards in high data-rate systems. The authors describe the classic applications of electromagnetic bandgap (EBG) structures and the phenomena of common mode generation in high speed digital boards. The text also explores the fundamental electromagnetic mechanisms of the functioning of planar EBGs and considers the impact of planar EBGs on the digital signal propagation of single ended and differential interconnects routed on top or between EBGs. The authors examine the concept, design, and modeling of EBG common mode filters in their two forms: on-board and removable. They also provide several comparisons between measurement and electromagnetic simulations that validate the proposed EBG filters' design approach. This important resource: • Presents information on planar EBG based common mode filters for high speed differential digital systems • Provides systematic analysis of the fundamental mechanisms of planar EBG structures • Offers detailed design methodology to create EBG filters without the need for repeated full-wave electromagnetic analysis • Demonstrates techniques for use in practical real-world designs Electromagnetic Bandgap (EBG) Structures: Common Mode Filters for High Speed Digital Systems offers an introduction to the background, design, and application of common-mode filtering structures in modern high-speed differential communication links, a critical issue in high-speed and high-performance systems.

Download or read book Interconnects in VLSI Design written by Hartmut Grabinski and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an updated selection of the most representative contributions to the 2nd and 3rd IEEE Workshops on Signal Propagation on Interconnects (SPI) which were held in Travemtinde (Baltic See Side), Germany, May 13-15, 1998, and in Titisee-Neustadt (Black Forest), Germany, May 19-21, 1999. This publication addresses the need of developers and researchers in the field of VLSI chip and package design. It offers a survey of current problems regarding the influence of interconnect effects on the electrical performance of electronic circuits and suggests innovative solutions. In this sense the present book represents a continua tion and a supplement to the first book "Signal Propagation on Interconnects", Kluwer Academic Publishers, 1998. The papers in this book cover a wide area of research directions: Beneath the des cription of general trends they deal with the solution of signal integrity problems, the modeling of interconnects, parameter extraction using calculations and measurements and last but not least actual problems in the field of optical interconnects.

Download or read book ESD in Silicon Integrated Circuits written by E. Ajith Amerasekera and published by John Wiley & Sons. This book was released on 2002-05-22 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Examines the various methods available for circuit protection, including coverage of the newly developed ESD circuit protection schemes for VLSI circuits. * Provides guidance on the implementation of circuit protection measures. * Includes new sections on ESD design rules, layout approaches, package effects, and circuit concepts. * Reviews the new Charged Device Model (CDM) test method and evaluates design requirements necessary for circuit protection.

Download or read book Millimeter Wave Antennas for 5G Mobile Terminals and Base Stations written by Shiban Kishen Koul and published by CRC Press. This book was released on 2020-11-24 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses antenna designs for handheld devices as well as base stations. The book serves as a reference and a handy guide for graduate students and PhD students involved in the field of millimeter wave antenna design. It also gives insights to designers and practicing engineers who are actively engaged in design of antennas for future 5G devices. It offers an in-depth study, performance analysis and extensive characterization of novel antennas for 5G applications. The reader will learn about basic design methodology and techniques to develop antennas for 5G applications including concepts of path loss compensation, co-design of commercial 4G antennas with millimeter wave 5G antennas and antennas used in phase array and pattern diversity modules. Practical examples included in the book will help readers to build high performance antennas for 5G subsystems/systems using low cost technology. Key Features Provides simple design methodology of different antennas for handheld devices as well as base stations for 5G applications. Concept of path loss compensation introduced. Co-design of commercial 4G antennas with millimetre wave 5G antennas presented. Comparison of phased array versus pattern diversity modules discussed in detail. Fabrication and Measurement challenges at mmWaves and Research Avenues in antenna designs for 5G and beyond presented. Shiban Kishen Koul is an emeritus professor at the Centre for Applied Research in Electronics at the Indian Institute of Technology Delhi. He served as the chairman of Astra Microwave Products Limited, Hyderabad from 2009-2018. He is a Life Fellow of the Institution of Electrical and Electronics Engineering (IEEE), USA, a Fellow of the Indian National Academy of Engineering (INAE), and a Fellow of the Institution of Electronics and Telecommunication Engineers (IETE). Karthikeya G S worked as an assistant professor in Visvesvaraya technological university from 2013 to 2016 and completed his PhD from the Centre for Applied Research in Electronics at the Indian Institute of Technology Delhi in Dec.2019. He is a member of IEEE-Antenna Propagation Society and Antenna Test and Measurement society.

Download or read book Converging Technologies for Improving Human Performance written by Mihail C. Roco and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: M. C. Roco and W.S. Bainbridge In the early decades of the 21st century, concentrated efforts can unify science based on the unity of nature, thereby advancing the combination of nanotechnology, biotechnology, information technology, and new technologies based in cognitive science. With proper attention to ethical issues and societal needs, converging in human abilities, societal technologies could achieve a tremendous improvement outcomes, the nation's productivity, and the quality of life. This is a broad, cross cutting, emerging and timely opportunity of interest to individuals, society and humanity in the long term. The phrase "convergent technologies" refers to the synergistic combination of four major "NBIC" (nano-bio-info-cogno) provinces of science and technology, each of which is currently progressing at a rapid rate: (a) nanoscience and nanotechnology; (b) biotechnology and biomedicine, including genetic engineering; (c) information technology, including advanced computing and communications; (d) cognitive science, including cognitive neuroscience. Timely and Broad Opportunity. Convergence of diverse technologies is based on material unity at the nanoscale and on technology integration from that scale.

Download or read book High Speed Digital System Design written by Stephen H. Hall and published by Wiley-IEEE Press. This book was released on 2000-09-08 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: A cutting-edge guide to the theory and practice of high-speed digital system design An understanding of high-speed interconnect phenomena is essential for digital designers who must deal with the challenges posed by the ever-increasing operating speeds of today's microprocessors. This book provides a much-needed, practical guide to the state of the art of modern digital system design, combining easily accessible explanations with immensely useful problem-solving strategies. Written by three leading Intel engineers, High-Speed Digital System Design clarifies difficult and often neglected topics involving the effects of high frequencies on digital buses and presents a variety of proven techniques and application examples. Extensive appendices, formulas, modeling techniques as well as hundreds of figures are also provided. Coverage includes: * A thorough introduction to the digital aspects of basic transmission line theory * Crosstalk and nonideal transmission line effects on signal quality and timings * The impact of packages, vias, and connectors on signal integrity * The effects of nonideal return current paths, high frequency power delivery, and simultaneous switching noise * Explanations of how driving circuit characteristics affect the quality of the digital signal * Digital timing analysis at the system level that incorporates high-speed signaling effects into timing budgets * Methodologies for designing high-speed buses and handling the very large number of variables that affect interconnect performance * Radiated emission problems and how to minimize system noise * The practical aspects of making measurements in high-speed digital systems

Download or read book Theory and Computation of Electromagnetic Fields written by Jian-Ming Jin and published by John Wiley & Sons. This book was released on 2015-08-10 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the fundamental concepts behind the theory and computation of electromagnetic fields The book is divided in two parts. The first part covers both fundamental theories (such as vector analysis, Maxwell’s equations, boundary condition, and transmission line theory) and advanced topics (such as wave transformation, addition theorems, and fields in layered media) in order to benefit students at all levels. The second part of the book covers the major computational methods for numerical analysis of electromagnetic fields for engineering applications. These methods include the three fundamental approaches for numerical analysis of electromagnetic fields: the finite difference method (the finite difference time-domain method in particular), the finite element method, and the integral equation-based moment method. The second part also examines fast algorithms for solving integral equations and hybrid techniques that combine different numerical methods to seek more efficient solutions of complicated electromagnetic problems. Theory and Computation of Electromagnetic Fields, Second Edition: Provides the foundation necessary for graduate students to learn and understand more advanced topics Discusses electromagnetic analysis in rectangular, cylindrical and spherical coordinates Covers computational electromagnetics in both frequency and time domains Includes new and updated homework problems and examples Theory and Computation of Electromagnetic Fields, Second Edition is written for advanced undergraduate and graduate level electrical engineering students. This book can also be used as a reference for professional engineers interested in learning about analysis and computation skills.

Download or read book Broadband Planar Antennas written by Zhi Ning Chen and published by John Wiley & Sons. This book was released on 2006-05-01 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing demand for wireless communications has revolutionised the lifestyle of today’s society and one of the key components of wireless technology is antenna design. Broadband planar antennas are the newest generation of antennas boasting the attractive features required, such as broad operating bandwidth, low profile, light weight, low cost and ease of integration into arrays or Radio Frequency (RF) circuits, to make them ideal components of modern communications systems. Research into small and broadband antennas has been spurred by the rapid development of portable wireless communication devices such as cell phones, laptops and personal digital assistants. This all-encompassing volume, Broadband Planar Antennas: Design and Applications, systematically describes the techniques for all planar antennas from microstrip patch antennas, suspended plate antennas and planar inverted-L/F antennas to planar dipole antennas. Also discussed are some of the most recent outcomes such as broadband antenna issues in promising ultra-wideband applications. Clearly describes the fundamentals of planar antennas and categorises them according to their radiation characteristics Introduces the advanced progress in broadband planar antennas for modern wireless communications Includes a wealth of case studies, design guidelines, figures and tables This text is essential reading for antenna, RF and microwave engineers and manufacturers within the telecommunications industry. Its highly accessible approach will also appeal to researchers, postgraduate students and academic lecturers.

Download or read book Electromagnetics and Network Theory and their Microwave Technology Applications written by Stefan Lindenmeier and published by Springer Science & Business Media. This book was released on 2011-07-13 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a discussion of the challenges and perspectives of electromagnetics and network theory and their microwave applications in all aspects. It collects the most interesting contribution of the symposium dedicated to Professor Peter Russer held in October 2009 in Munich.

Download or read book Lumped Elements for RF and Microwave Circuits written by I. J. Bahl and published by Artech House. This book was released on 2003 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical book is the first comprehensive treatment of lumped elements, which are playing a critical role in the development of the circuits that make these cost-effective systems possible. The book offers professionals an in-depth understanding of the different types of RF and microwave circuit elements.

Download or read book Lab on Fiber Technology written by Andrea Cusano and published by Springer. This book was released on 2014-07-29 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on a research field that is rapidly emerging as one of the most promising ones for the global optics and photonics community: the “lab-on-fiber” technology. Inspired by the well-established "lab on-a-chip" concept, this new technology essentially envisages novel and highly functionalized devices completely integrated into a single optical fiber for both communication and sensing applications. Based on the R&D experience of some of the world's leading authorities in the fields of optics, photonics, nanotechnology, and material science, this book provides a broad and accurate description of the main developments and achievements in the lab-on-fiber technology roadmap, also highlighting the new perspectives and challenges to be faced. This book is essential for scientists interested in the cutting-edge fiber optic technology, but also for graduate students.