Download or read book Siemens Nx 10 Surface Design written by Jaecheol Koh and published by Createspace Independent Publishing Platform. This book was released on 2016-04-04 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explains how to create freeform surface and modify them to create freeform face of a solid body using Siemens NX 10. NX is a three dimensional CAD/CAM/CAE software developed by Siemens PLM Software Inc., Germany. This textbook is based on NX 10.0. Users of NX 9.0 can use this book with minor modifications. We provide files for exercises via our website. All files are in NX 6.0 so readers can open the files using NX 6.0 and later releases. It is assumed that readers of this textbook understand basic modeling process with NX. He/She has to be able to create sketch and fully constrain it, create the extruded and revolved features, apply boolean operation between solid bodies and understand how to use part navigator and selection toolbar. This textbook is suitable for anyone interested in creating mechanical surface and applying for solid body using Siemens NX. Topics covered in this textbook - Chapter 1: Basic components of Siemens NX 8.x, options and mouse operations. - Chapter 2: Introduction to surface modeling process of NX 10. - Chapter 3 and 4: Creating Ruled and Through Curves surface. - Chapter 5: Face analysis. - Chapter 6, 7 and 8: Creating Through Curve Mesh, Swept and Variational Sweep surface. - Chapter 9: Commands for creating curves. - Chapter 10: Other helpful commands for creating surface model. - Chapter 11: Modeling projects. - Chapter 12: Modeling Bumper Surface of Audi Q5

Download or read book SIEMENS NX 12 Surface Design written by Jaecheol Koh and published by onsia. This book was released on 2018-11-09 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explains how to create freeform surface and modify them to create freeform face of a solid body using Siemens NX 12. NX is a three dimensional CAD/CAM/CAE software developed by Siemens PLM Software Inc., Germany. Users of NX 9, 10 and 11 can use this book with minor modifications. We provide files for exercises via our web- site. Most of all files are in NX 6.0 so readers can open the files using NX 6.0 and later releases. It is assumed that readers of this textbook understand basic modeling process with NX. He/She has to be able to create sketch and fully constrain it, create the extruded and re- volved features, apply boolean operation between solid bodies and understand how to use part navigator and selection toolbar. This textbook is suitable for anyone interested in creating mechanical surface and applying for solid body using Siemens NX. Topics covered in this textbook - Chapter 1: Basic components of Siemens NX 12, options and mouse operations. - Chapter 2: Introduction to surface modeling process of NX 12. - Chapter 3 and 4: Creating Ruled and Through Curves surface. - Chapter 5: Face analysis. - Chapter 6, 7, 8 and 9: Creating Through Curve Mesh, Swept, Studio Surface and Varia- tional Sweep surface. - Chapter 10: Commands for creating curves. - Chapter 11: Other helpful commands for creating surface model. - Chapter 12: Modeling projects. - Chapter 13: Modeling bumper surface of Audi Q5.

Download or read book Siemens Nx 8 8 5 Surface Design written by Koh Jaecheol and published by Createspace Independent Publishing Platform. This book was released on 2014-06-15 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explains how to create freeform surface and modify them to create freeform face of a solid body using Siemens NX 8.0/8.5. NX is a three dimensional CAD/CAM/CAE software developed by Siemens PLM Software Inc., Germany. This textbook is based on NX 8.0 and updated to NX 8.5 by adding a new section in each chapter for modification. Users of earlier releases can use this book with minor modifications. We provide files for exercises via our website. All files are in NX 6.0 so readers can open the files using NX 6.0 and later releases. It is assumed that readers of this textbook understand basic modeling process with NX. He/She has to be able to create sketch and fully constrain it, create the extruded and revolved features, apply boolean operation between solid bodies and understand how to use part navigator and selection toolbar. This textbook is suitable for anyone interested in creating mechanical surface and applying for solid body using Siemens NX. Topics covered in this textbook - Chapter 1: Basic components of Siemens NX 8.x, options and mouse operations. - Chapter 2: Introduction to surface modeling process of NX 8.x. - Chapter 3 and 4: Creating Ruled and Through Curves surface. - Chapter 5: Face analysis. - Chapter 6, 7 and 8: Creating Through Curve Mesh, Swept and Variational Sweep surface. - Chapter 9: Commands for creating curves. - Chapter 10: Other helpful commands for creating surface model. - Chapter 11: Modeling projects.

Download or read book Siemens NX 2020 for Designers 13th Edition written by Prof. Sham Tickoo and published by CADCIM Technologies. This book was released on 2020-07-21 with total page 1075 pages. Available in PDF, EPUB and Kindle. Book excerpt: Siemens NX 2020 for Designers is a comprehensive book that introduces the users to feature based 3D parametric solid modeling using the NX software. The book covers all major environments of NX with a thorough explanation of all tools, options, and their applications to create real-world products. More than 40 mechanical engineering industry examples and additional 35 exercises given in the book ensure that the users properly understand the solid modeling design techniques used in the industry and are able to efficiently create parts, assemblies, drawing views with bill of materials as well as learn the editing techniques that are essential to make a successful design. In this edition, four industry specific projects are also provided for free download to the users to practice the tools learned and enhance their skills. Keeping in mind the requirements of the users, the book first introduces sketching and part modeling and then gradually progresses to cover assembly, surfacing, and drafting. To make the users understand the concepts of Mold Design and GD&T, two chapters are added in this book. Written with the tutorial point of view and the learn-by-doing theme, the book caters to the needs of both novice and advanced users of NX and is ideally suited for learning at your convenience and pace. Salient Features Comprehensive coverage of NX concepts and techniques. Tutorial approach to explain the concepts and tools of NX. Detailed explanation of all commands and tools. Hundreds of illustrations for easy understanding of concepts. Step-by-step instructions to guide the users through the learning process. More than 40 real-world mechanical engineering designs as tutorials, 35 as exercises, and projects with step-by-step explanation. Four real world projects available for free download. Additional information throughout the book in the form of notes and tips. Self-Evaluation Tests and Review Questions at the end of each chapter to help the users assess their knowledge. Table of Contents Chapter 1: Introduction to NX Chapter 2: Drawing Sketches for Solid Models Chapter 3: Adding Geometric and Dimensional Constraints to Sketches Chapter 4: Editing, Extruding, and Revolving Sketches Chapter 5: Working with Datum Planes, Coordinate Systems, and Datum Axes Chapter 6: Advanced Modeling Tools-I Chapter 7: Advanced Modeling Tools-II Chapter 8: Assembly Modeling-I Chapter 9: Assembly Modeling-II Chapter 10: Surface Modeling Chapter 11: Advanced Surface Modeling Chapter 12: Generating, Editing, and Dimensioning the Drawing Views Chapter 13: Synchronous Modeling Chapter 14: Sheet Metal Design Chapter 15: Introduction to Injection Mold Design * Chapter 16: Concepts of Geometric Dimensioning and Tolerancing * Index (* For Free Download)

Download or read book Siemens Nx 10 Design Fundamentals written by Jaecheol Koh and published by CreateSpace. This book was released on 2015-08-25 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explains how to create solid models, assemblies and drawings using Siemens NX 10. NX is a three dimensional CAD/CAM/CAE software developed by Siemens PLM Software Inc., Germany. This textbook is based on NX 10. Users of earlier releases can use this book with minor modifications. We provide files for exercises via our website. Almost all files are in NX 6.0 so readers can open the files using NX 6.0 and later releases. It is assumed that readers of this textbook have no prior experience in using Siemens NX for modeling 3D parts. This textbook is suitable for anyone interested in learning 3D modeling using Siemens NX. Each chapter deals with the major functions of creating 3D features using simple examples and step by step, self-paced exercises. Additional drawings of 3D parts are provided at the end of each chapter for further self exercises. The final exercises are expected to be completed by readers who have fully understood the content and completed the exercises in each chapter. Topics covered in this textbook - Chapter 1: Basic components of Siemens NX 10, options and mouse operations. - Chapter 2: Basic step by step modeling process of NX 10. - Chapter 3 and 4: Creating sketches and sketch based features. - Chapter 5: Usage of datums to create complex 3D geometry. - Chapter 6: Additional modeling commands such as fillet, chamfer, draft and shell. - Chapter 7: Modification of 3D parts to take advantage of parametric modeling concepts. - Chapter 8: Copying features, modeling objects and bodies. - Chapter 9: Additional modeling commands such as trim body, tube, sweep along guide, emboss and various commands in synchronous modeling. - Chapter 10: Advanced sketch commands. - Chapter 11: Measuring and verifying 3D geometries. - Chapter 12 and 13: Constructing assembly structures and creating or modifying 3D parts in the context of assembly. - Chapter 14 and 15: Creating drawings for parts or assemblies. - Appendix A: Selecting Objects

Download or read book Siemens NX 2019 for Designers 12th Edition written by Prof. Sham Tickoo and published by CADCIM Technologies. This book was released on 2019 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt: Siemens NX 2019 for Designers is a comprehensive book that introduces the users to feature based 3D parametric solid modeling using the NX software. The book covers all major environments of NX with a thorough explanation of all tools, options, and their applications to create real-world products. In this book, about 40 mechanical engineering industry examples are used as tutorials and an additional 35 as exercises to ensure that the users can relate their knowledge and understand the design techniques used in the industry to design a product. After reading the book, the user will be able to create parts, assemblies, drawing views with bill of materials, and learn the editing techniques that are essential to make a successful design. Also, in this book, the author emphasizes on the solid modeling techniques that improve the productivity and efficiency of the user. Keeping in mind the requirements of the users, the book at first introduces sketching and part modeling in NX, and then gradually progresses to cover assembly, surfacing, and drafting. To make the users understand the concepts of Mold Design, a chapter on mold designing of the plastic components is available in the book. In addition, a new chapter on basic concepts of GD&T has also been added in this book. Both these chapters are available for free download. Written with the tutorial point of view and the learn-by-doing theme, the book caters to the needs of both novice and advanced users of NX and is ideally suited for learning at your convenience and pace. Salient Features: Comprehensive coverage of NX concepts and techniques. Tutorial approach to explain the concepts and tools of NX. Detailed explanation of all commands and tools. Hundreds of illustrations for easy understanding of concepts. Step-by-step instructions to guide the users through the learning process. More than 40 real-world mechanical engineering designs as tutorials, 35 as exercises, and projects with step-by-step explanation. Additional information throughout the book in the form of notes and tips. Self-Evaluation Tests and Review Questions at the end of each chapter to help the users assess their knowledge. Table of Contents Chapter 1: Introduction to NX Chapter 2: Drawing Sketches for Solid Models Chapter 3: Adding Geometric and Dimensional Constraints to Sketches Chapter 4: Editing, Extruding, and Revolving Sketches Chapter 5: Working with Datum Planes, Coordinate Systems, and Datum Axes Chapter 6: Advanced Modeling Tools-I Chapter 7: Advanced Modeling Tools-II Chapter 8: Assembly Modeling-I Chapter 9: Assembly Modeling-II Chapter 10: Surface Modeling Chapter 11: Advanced Surface Modeling Chapter 12: Generating, Editing, and Dimensioning the Drawing Views Chapter 13: Synchronous Modeling Chapter 14: Sheet Metal Design Chapter 15: Introduction to Injection Mold Design (For Free Download) Chapter 16: Concepts of Geometric Dimensioning and Tolerancing (For Free Download) Index

Download or read book Siemens NX 12 0 for Designers 11th Edition written by Prof. Sham Tickoo and published by CADCIM Technologies. This book was released on 2018 with total page 881 pages. Available in PDF, EPUB and Kindle. Book excerpt: Siemens NX 12.0 for Designers is a comprehensive book that introduces the users to feature based 3D parametric solid modeling using the NX 12.0 software. The book covers all major environments of NX with a thorough explanation of all tools, options, and their applications to create real-world products. In this book, about 39 mechanical engineering industry examples are used as tutorials and an additional 34 as exercises to ensure that the users can relate their knowledge and understand the design techniques used in the industry to design a product. After reading the book, the user will be able to create parts, assemblies, drawing views with bill of materials, and learn the editing techniques that are essential to make a successful design. Also, in this book, the author emphasizes on the solid modeling techniques that improve the productivity and efficiency of the user. Salient Features: Consists of 16 chapters that are organized in a pedagogical sequence. Comprehensive coverage of NX 12.0 concepts and techniques. Tutorial approach to explain the concepts of NX 12.0. Hundreds of illustrations for easy understanding of concepts. More than 39 real-world mechanical engineering designs as tutorials, 34 as exercises, and projects with step-by-step explanation. Additional information throughout the book in the form of notes and tips. Self-Evaluation Tests and Review Questions at the end of each chapter to help the users assess their knowledge. Technical support by contacting '[email protected]'. Additional learning resources at 'allaboutcadcam.blogspot.com'. Table of Contents Chapter 1: Introduction to NX 12.0 Chapter 2: Drawing Sketches for Solid Models Chapter 3: Adding Geometric and Dimensional Constraints to Sketches Chapter 4: Editing, Extruding, and Revolving Sketches Chapter 5: Working with Datum Planes, Coordinates Systems, and Datum Axes Chapter 6: Advanced Modeling Tools-I Chapter 7: Advanced Modeling Tools-II Chapter 8: Assembly Modeling-I Chapter 9: Assembly Modeling-II Chapter 10: Surface Modeling Chapter 11: Advanced Surface Modeling Chapter 12: Generating, Editing, and Dimensioning the Drawing Views Chapter 13: Synchronous Modeling Chapter 14: Sheet Metal Design Chapter 15: Introduction to Injection Mold Design (For Free Download) Chapter 16: Concepts of Geometric Dimensioning and Tolerancing (For Free Download) Index

Download or read book Siemens NX 2021 for Designers 14th Edition written by Prof. Sham Tickoo and published by CADCIM Technologies. This book was released on 2021-05-28 with total page 1410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Siemens NX 2021 for Designers is a comprehensive book that introduces the users to feature-based 3D parametric solid modeling using the NX software. The book covers all major environments of NX with a thorough explanation of all tools, options, and their applications to create real-world products. More than 40 mechanical engineering industry examples and additional 35 exercises given in the book ensure that the users properly understand the solid modeling design techniques used in the industry and are able to efficiently create parts, assemblies, drawing views with bill of materials as well as learn the editing techniques that are essential to make a successful design. In this edition, four industry-specific projects are also provided for free download to the users to practice the tools learned and enhance their skills.

Download or read book NX 10 0 for Designers written by Sham Tickoo and published by . This book was released on 2016 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Consists of 800 pages of heavily illustrated text covering the following environments of NX: part modeling, assembly design, surface design, drafting, synchronous modeling, sheet metal design"--Cover.

Download or read book Siemens NX 10 Nastran written by Jaecheol Koh and published by onsia. This book was released on 2017-02-09 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explains how to perform computer aided analysis by using NX 10 Advanced Simulation with NX Nastran solver. It starts with analyzing a cantilevered beam and builds up the reader’s understanding of the concepts and process of structural analysis. Each chapter contains a typical example of analysis and is followed by a quiz to summarize the topics. In addition to the tutorial in each chapter, more commands and concepts are explained at the end of the chapter to help improve the reader’s understanding. The method for concluding an analysis is presented at the end of the tutorial for typical cases.Topics covered in this textbook - Chapter 1 through 3: Introducing NX 10 and Basic Modeling Techniques. - Chapter 4: Cantilevered Beam - Chapter 5: Effect of Fillet - Chapter 6: Effect of Stiffener - Chapter 7: Subcase and Symmetry - Chapter 8: Static Equilibrium and Singularity - Chapter 9: Using Coordinate System in Constraining - Chapter 10: Using 2D Elements - Chapter 11: Using 1D Elements - Chapter 12: Analysis of Truss Structure - Chapter 13: Connecting 2D Meshes - Chapter 14: Using 1D and 2D Meshes - Chapter 15: Using 1D and 3D Meshes - Chapter 16: Analyzing Alternator Bracket - Chapter 17: Contact Analysis - Chapter 18: Analyzing Bearing and Housing - Chapter 19: Spot Welding and Bolt Connection - Chapter 20: Analysis of Press Fit - Chapter 21: Quality of Elements - Chapter 22: Buckling Analysis - Chapter 23: Modal Analysis - Chapter 24: Thermal Analysis - Chapter 25: Fatigue Analysis

Download or read book Nx 10 Tutorial written by Online Instructor and published by CreateSpace. This book was released on 2015-03-31 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: NX 10 Tutorial is written to help new users to learn the basics of NX and some advanced solid modeling techniques. The Author guides readers through NX 10 with clear and step-by-step tutorials that help you to design solid models from day one. The first four chapters of this book cover the user interface, part modeling, assemblies, and drawings. After learning the basics, you can learn additional sketching tools, feature modeling tools, expressions, sheet metal modeling, some advanced assembly techniques, drawing annotations, and simulation basics. Table of Contents 1. Getting Started 2. Modeling Basics 3. Constructing Assembly 4. Generating Drawings 5. Sketching 6. Additional Modeling Tools 7. Top Down Assembly 8. Dimensions and Annotations 9. Simulation Hands on Tutorial

Download or read book Parametric Modeling with Siemens NX Spring 2020 Edition written by Randy Shih and published by SDC Publications. This book was released on 2020-06-08 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of Parametric Modeling with Siemens NX is to introduce the aspects of designing with Solid Modeling and Parametric Modeling. This text is intended to be used as a practical training guide for students and professionals. This text uses Siemens NX as the modeling tool, and the chapters proceed in a pedagogical fashion to guide you from constructing basic solid models to building intelligent mechanical designs, creating multi-view drawings and assembly models. This text takes a hands-on, exercise-intensive approach to all the important Parametric Modeling techniques and concepts. This textbook contains a series of fifteen tutorial style lessons designed to introduce beginning CAD users to NX. This text is also helpful to NX users upgrading from a previous release of the software. The solid modeling techniques and concepts discussed in this text are also applicable to other parametric feature-based CAD packages. The basic premise of this book is that the more designs you create using NX, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons. This book does not attempt to cover all of NX’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering. This book also introduces you to the general principles of 3D printing including a brief history of 3D printing, the types of 3D printing technologies, commonly used filaments, and the basic procedure for printing a 3D model. 3D printing makes it easier than ever for anyone to start turning their designs into physical objects, and by the end of this book you will be ready to start printing out your own designs.

Download or read book Nx 12 for Beginners written by Tutorial Books and published by Createspace Independent Publishing Platform. This book was released on 2018-05-03 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: NX 12 For Beginners introduces you to the basics of NX 12 by using step-by-step instructions. You begin with brief introduction to NX 12 and the User Interface, ribbon, environments, commands, and various options. Within a short time, you will learn to create 2D sketches that form the basis for 3D models. You will learn to sketch on three different planes (Front, Top and Right planes). You will use various sketching tools such as line, rectangle, circle, and so on. You will also learn to modify sketches using tools such as trim, extend, fillets, and so on. Learn to use geometric constraints and dimensions to achieve a definite shape and size of the sketch. Sketches are converted into 3D features such as Extrude, Revolve, and so on. You combine or subtract features to achieve the final part. You can also add placed features (sketch less features) such as Fillets, and Holes to the 3D geometry. You explore mirroring and patterning commands to create repetitive features. You will learn to use some additional modeling tools and work with multi-body parts. Learn to modify part geometry by editing sketches and feature parameters. You explore Synchronous Modeling tools to modify the Part geometry by modifying its faces. You build assemblies after creating parts. There are two methods to build assemblies: Bottom-up and Top-down. In the Bottom-up method, you bring all the parts together and add constraints between them. In the Top-down method, you create parts in the assembly level. You explode assemblies to show the manner in which they were assembled. You create Drawings of the parts and assemblies. You insert part views and add dimensions and annotations to complete the drawing. In case of assembly drawings, you insert assembly views, add Bill of Materials, Balloons, and Revision table. The Sheet Metal design chapter covers various tools used to build sheet metal parts from scratch. You will also learn to convert an existing part geometry into sheet metal part. You also create flat patterns and 2D sheet metal drawings. The Surface design chapter covers the surface modeling tools that are used to create complex shapes. The NX Realize Shape chapter covers the freeform modeling tools. Table of Contents . Getting Started with NX 12 2. Sketch Techniques 3. Extrude and Revolve Features 4. Placed Features 5. Patterned Geometry 6. Additional Features and Multibody Parts 7. Modifying Parts 8. Assemblies 9. Drawings 10. Sheet Metal Design 11. Surface Design 12. NX Realize Shape If you are an educator, you can request a free evaluation copy by sending us an email to [email protected]

Download or read book Siemens Nx 12 Design Fundamentals written by Jaecheol Koh and published by Createspace Independent Publishing Platform. This book was released on 2018-07-18 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explains how to create solid models, assemblies and drawings using Siemens NX 12. NX is a three dimensional CAD/CAM/CAE software developed by Siemens PLM Software Inc., Germany. This textbook is based on NX 12. Users of earlier releases can use this book with minor modifications. We provide files for exercises via our website. Almost all files are in NX 6.0 so readers can open the files using NX 6.0 and later releases. It is assumed that readers of this textbook have no prior experience in using Siemens NX for modeling 3D parts. This textbook is suitable for anyone interested in learning 3D modeling using Siemens NX. Each chapter deals with the major functions of creating 3D features using simple examples and step by step, self-paced exercises. Additional drawings of 3D parts are provided at the end of each chapter for further self exercises. The final exercises are expected to be completed by readers who have fully understood the content and completed the exercises in each chapter. Topics covered in this textbook - Chapter 1: Basic components of Siemens NX 12, options and mouse operations. - Chapter 2: Basic step by step modeling process of NX 12. - Chapter 3 and 4: Creating sketches and sketch based features. - Chapter 5: Usage of datums to create complex 3D geometry. - Chapter 6: Additional modeling commands such as fillet, chamfer, draft and shell. - Chapter 7: Modification of 3D parts to take advantage of parametric modeling concepts. - Chapter 8: Copying features, modeling objects and bodies. - Chapter 9: Additional modeling commands such as trim body, tube, sweep along guide, emboss and various commands in synchronous modeling. - Chapter 10: Advanced sketch commands. - Chapter 11: Measuring and verifying 3D geometries. - Chapter 12 and 13: Constructing assembly structures and creating or modifying 3D parts in the context of assembly. - Chapter 14 and 15: Creating drawings for parts or assemblies. - Appendix A: Selecting Objects

Download or read book Progress in the Analysis and Design of Marine Structures written by Carlos Guedes Soares and published by CRC Press. This book was released on 2017-04-28 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in the Analysis and Design of Marine Structures collects the contributions presented at MARSTRUCT 2017, the 6th International Conference on Marine Structures (Lisbon, Portugal, 8-10 May 2017). The MARSTRUCT series of Conferences started in Glasgow, UK in 2007, the second event of the series having taken place in Lisbon, Portugal in March 2009, the third in Hamburg, Germany in March 2011, the fourth in Espoo, Finland in March 2013, and the fifth in Southampton, UK in March 2015. This Conference series deals with Ship and Offshore Structures, addressing topics in the areas of: - Methods and Tools for Loads and Load Effects - Methods and Tools for Strength Assessment - Experimental Analysis of Structures - Materials and Fabrication of Structures - Methods and Tools for Structural Design and Optimisation, and - Structural Reliability, Safety and Environmental Protection Progress in the Analysis and Design of Marine Structures is essential reading for academics, engineers and all professionals involved in the design of marine and offshore structures.

Download or read book CATIA V5 6R2017 for Designers 15th Edition written by Prof. Sham Tickoo and published by CADCIM Technologies. This book was released on 2017-12-27 with total page 1128 pages. Available in PDF, EPUB and Kindle. Book excerpt: CATIA V5-6R2017 for Designers is a comprehensive book written with the intention of helping the readers effectively use all solid modeling tools and other features of CATIA V5-6R2017. This book provides elaborate and clear explanation of tools of all commonly used workbenches of CATIA V5-6R2017. After reading this book, you will be able to create, assemble, and draft models. The chapter on the DMU Kinematics workbench will enable the users to create, edit, simulate, and analyze different mechanisms dynamically. The chapter on Generative Shape Design explains the concept of hybrid designing of models. Also, it enable the users to quickly model both simple and complex shapes using wireframe, volume and surface features. The chapter on the FreeStyle workbench will enable the users to dynamically design and manipulate surfaces. In this book, a chapter on FEA and structural analysis has been added to help users to analyze their own designs by calculating stresses and displacements using various tools available in the Advanced Meshing Tools and Generative Structural Analysis workbenches of CATIA V5-6R2017. The book explains the concepts through real-world examples and the tutorials used in this book. After reading this book, the users will be able to create solid parts, sheet metal parts, assemblies, weldments, drawing views with bill of materials, presentation views to animate the assemblies, analyze their own designs and apply direct modeling techniques to facilitate rapid design prototyping. Also, the users will learn the editing techniques that are essential for making a successful design. Salient Features Consists of 19 chapters that are organized in a pedagogical sequence. Detailed explanation of CATIA V5-6R2017 tools. First page summarizes the topics covered in the chapter. Hundreds of illustrations and comprehensive coverage of CATIA V5-6R2017 concepts and techniques. Step-by-step instructions that guide the users through the learning process. More than 40 real-world mechanical engineering designs as tutorials and projects. Technical support by contacting [email protected]. Additional learning resources at https://allaboutcadcam.blogspot.com Table of Contents Chapter 1: Introduction to CATIA V5-6R2017 Chapter 2: Drawing Sketches in the Sketcher Workbench-I Chapter 3: Drawing Sketches in the Sketcher Workbench-II Chapter 4: Constraining Sketches and Creating Base Features Chapter 5: Reference Elements and Sketch-Based Features Chapter 6: Creating Dress-Up and Hole Features Chapter 7: Editing Features Chapter 8: Transformation Features and Advanced Modeling Tools-I Chapter 9: Advanced Modeling Tools-II Chapter 10: Working with the Wireframe and Surface Design Workbench Chapter 11: Editing and Modifying Surfaces Chapter 12: Assembly Modeling Chapter 13: Working with the Drafting Workbench-I Chapter 14: Working with the Drafting Workbench-II Chapter 15: Working with the Sheet Metal Components Chapter 16: DMU Kinematics Chapter 17: Introduction to Generative Shape Design Chapter 18: Working with the FreeStyle Workbench Chapter 19: Introduction to FEA and Generative Structural Analysis Index

Download or read book Parametric Modeling with Siemens NX Spring 2019 Edition written by Randy Shih and published by SDC Publications. This book was released on 2019-05 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of Parametric Modeling with Siemens NX is to introduce the aspects of designing with Solid Modeling and Parametric Modeling. This text is intended to be used as a practical training guide for students and professionals. This text uses Siemens NX as the modeling tool, and the chapters proceed in a pedagogical fashion to guide you from constructing basic solid models to building intelligent mechanical designs, creating multi-view drawings and assembly models. This text takes a hands-on, exercise-intensive approach to all the important Parametric Modeling techniques and concepts. This textbook contains a series of fifteen tutorial style lessons designed to introduce beginning CAD users to NX. This text is also helpful to NX users upgrading from a previous release of the software. The solid modeling techniques and concepts discussed in this text are also applicable to other parametric feature-based CAD packages. The basic premise of this book is that the more designs you create using NX, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons. This book does not attempt to cover all of NX’s features, only to provide an introduction to the software. It is intended to help you establish a good basis for exploring and growing in the exciting field of Computer Aided Engineering. This book also introduces you to the general principles of 3D printing including a brief history of 3D printing, the types of 3D printing technologies, commonly used filaments, and the basic procedure for printing a 3D model. 3D printing makes it easier than ever for anyone to start turning their designs into physical objects, and by the end of this book you will be ready to start printing out your own designs.