Download or read book Mobile Working Hydraulic System Dynamics written by Mikael Axin and published by Linköping University Electronic Press. This book was released on 2015-09-07 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis deals with innovative working hydraulic systems for mobile machines. Flow control systems are studied as an alternative to load sensing. The fundamental difference is that the pump is controlled based on the operator’s command signals rather than feedback signals from the loads. This control approach enables higher energy efficiency and there is no load pressure feedback causing stability issues. Experimental results show a reduced pump pressure margin and energy saving potential for a wheel loader application. The damping contribution from the inlet and outlet orifice in directional valves is studied. Design rules are developed and verified by experiments. A novel system architecture is proposed where flow control, load sensing and open-centre are merged into a generalized system description. The proposed system is configurable and the operator can realize the characteristics of any of the standard systems without compromising energy efficiency. This can be done non-discretely on-the-fly. Experiments show that it is possible to avoid unnecessary energy losses while improving system response and increasing stability margins compared to load sensing. Static and dynamic differences between different control modes are also demonstrated experimentally.

Download or read book Advances in Mechanism Machine Science and Engineering in China written by Xinjun Liu and published by Springer Nature. This book was released on 2023-05-31 with total page 2228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the conference proceedings of the 23rd IFToMM China International Conference on Mechanism and Machine Science & Engineering (IFToMM CCMMS 2022). CCMMS was initiated in 1982, and it is the most important forum held in China for the exchange of research ideas, presentation of technical and scientific achievements, and discussion of future directions in the field of mechanism and machine science. The topics include parallel/hybrid mechanism synthesis and analysis, theoretical & computational kinematics, compliant mechanisms and micro/nano-mechanisms, reconfigurable and metamorphic mechanisms, space structures, mechanisms and materials, structure adaptation in space environment and ground testing, large-scale membrane deployable structures, construction and application of super-scale space systems, cams, gears and combining mechanisms, fluid power mechatronics drivetrain, mechanical design theory and methods, dynamics and vibration control, mechatronics, biologically inspired mechanisms and robotics, medical & rehabilitation robotics, mobile robotics, soft robotics, heavy non-road mobile machine, robot applications, engineering education on mechanisms, machines, and robotics. This book provides a state-of-the-art overview of current advances in mechanism and machine science in China. The inspiring ideas presented in the papers enlighten academic research and industrial application. The potential readers include academic researchers and industrial professionals in mechanism and machine science.

Download or read book Advances in Hydraulic and Pneumatic Drives and Control 2020 written by Jarosław Stryczek and published by Springer Nature. This book was released on 2020-10-18 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research and technical achievements in the field of hydraulic drives. The chapters, selected from contributions presented at the International Scientific-Technical Conference on Hydraulic and Pneumatic Drives and Controls, NSHP 2020, held on October 21-23, 2020, in Trzebieszowice, Poland, cover a wide range of topics such as theoretical advances in fluid technology, work machines in mining, construction, marine and manufacturing industry, and practical issues relating to the application and operation of hydraulic drives. Further topics include: safety and environmental issues associated with the use of machines with hydraulic drive, and new materials in design of hydraulic components. A special emphasis is given to new solutions for hydraulic components and systems as well as to the identification of phenomena and processes occurring during the operation of hydraulic and pneumatic systems.

Download or read book Sustainable Design and Manufacturing 2014 Part 1 written by R. Setchi and published by Lulu.com. This book was released on with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Novel Industry 4 0 Technologies and Applications written by Nikolaos Papakostas and published by MDPI. This book was released on 2020-11-25 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industry 4.0 paradigm has led to the creation of new opportunities for taking advantage of a set of diverse technologies in the manufacturing domain. This book touches on a series of advanced technologies and research fields, including Internet of Things, Augmented and Virtual Reality, Machine Learning, Advanced Robotics, Additive Manufacturing, System and Process Simulation, Computer-Aided Design/Engineering/Manufacturing/Process Planning Systems as well as Product Lifecycle Management Platforms. The topics covered span a series of diverse areas related to a) product design and development, b) manufacturing systems and operations, c) process engineering, and d) Industry 4.0 technologies review and realization.

Download or read book The 11th Scandinavian International Conference on Fluid Power written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hydrostatic Transmissions and Actuators written by Gustavo Costa and published by John Wiley & Sons. This book was released on 2015-07-22 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrostatic Transmissions and Actuators takes a pedagogical approach and begins with an overview of the subject, providing basic definitions and introducing fundamental concepts. Hydrostatic transmissions and hydrostatic actuators are then examined in more detail with coverage of pumps and motors, hydrostatic solutions to single-rod actuators, energy management and efficiency and dynamic response. Consideration is also given to current and emerging applications of hydrostatic transmissions and actuators in automobiles, mobile equipment, wind turbines, wave energy harvesting and airplanes. End of chapter exercises and real world industrial examples are included throughout and a companion website hosting a solution manual is also available. Hydrostatic Transmissions and Actuators is an up to date and comprehensive textbook suitable for courses on fluid power systems and technology, and mechatronics systems design.

Download or read book Dynamics and Control of Advanced Structures and Machines written by Hans Irschik and published by Springer Nature. This book was released on 2021-09-20 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected contributions to the 4th International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines. The workshop, which was held in Linz, Austria in September 2019, continued a series of international workshops — the Japan-Austria Joint Workshop on Mechanics and Model Based Control of Smart Materials and Structures, the Russia-Austria Joint Workshop on Advanced Dynamics and Model Based Control of Structures and Machines, and the first three editions of the International Workshop on Advanced Dynamics and Model Based Control of Structures and Machines. The chapters cover a broad spectrum of topics in the field of Advanced Structures and Machines both with respect to theoretical aspects as well as applications to contemporary engineering problems.

Download or read book Formal Methods for Industrial Critical Systems written by Frédéric Lang and published by Springer. This book was released on 2014-09-01 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 19th International Conference on Formal Methods for Industrial Critical Systems, FMICS 2014, held in Florence, Italy, in September 2014. The 13 papers presented in this volume were carefully reviewed and selected from 26 submissions. They are organized in topical sections named: cyber-physical systems; computer networks; railway control systems; verification methods; and hardware and software testing.

Download or read book Mobile Working Machines written by Marcus Geimer and published by SAE International. This book was released on 2020-12-31 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mobile Working Machines are defined by three characteristics. These machines have a cer-tain task of doing a working process, they are mobile, and they have a signifi cant energy share in their working functions. The machines should be as productive, efficient and of high quality as possible. All these machines in the fi eld of agriculture, forestry, construction, logistics, municipal sector, and in other special applications work in different applications. But, many technologies placed in the machines are the same, similar or comparable; therefore, different branches can learn from each other. Mobile Working Machines provides a wide and deep view into the technologies used in these machines. Appropriate for new engineers as well as those who wish to increase their knowledge in this field, this book brings together all the latest research and development into one place.

Download or read book Aerospace Actuators 2 written by Jean-Charles Maré and published by John Wiley & Sons. This book was released on 2017-04-24 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the second in a series of volumes which cover the topic of aerospace actuators following a systems-based approach. This second volume brings an original, functional and architectural vision to more electric aerospace actuators. The aspects of signal (Signal-by-Wire) and power (Power-by-Wire) are treated from the point of view of needs, their evolution throughout history, and operational solutions that are in service or in development. This volume is based on an extensive bibliography, numerous supporting examples and orders of magnitude which refer to flight controls and landing gear for various aircraft (fixed or rotorwing, launchers) in commercial, private and military applications. The topics covered in this set of books constitute a significant source of information for individuals and engineers from a variety of disciplines, seeking to learn more about aerospace actuation systems and components.

Download or read book On Motion Control of Linear Incremental Hydraulic Actuators written by Martin Hochwallner and published by Linköping University Electronic Press. This book was released on 2017-10-24 with total page 91 pages. Available in PDF, EPUB and Kindle. Book excerpt: Linear Incremental Hydraulic Actuators combine one or more short-stroke cylinders, and two or more engaging/disengaging mechanisms into one actuator with long, medium, or even unlimited stroke length. The motion of each single short-stroke actuator concatenated by the engaging/disengaging mechanisms forms the motion of the linear incremental hydraulic actuator. The patterns of how these motions are concatenated form the gaits of a specific linear incremental hydraulic actuator. Linear incremental hydraulic actuators may have more than one gait. In an application, the gaits may be combined to achieve optimal performance at various operating points. The distinguishing characteristic of linear incremental hydraulic actuators is the incremental motion. The term incremental actuator is seen as analogous to the incremental versus absolute position sensor. Incremental actuators realize naturally relative positioning. Incremental motion means also that the behavior does not depend on an absolute position but only on the relative position within a cycle or step. Incremental actuators may realize discrete incremental or continuous incremental motion. Discrete incremental actuators can only approach discrete positions, whereby stepper drives are one prominent example. In contrast, continuous incremental actuators may approach any position. Linear electric motors are one example of continuous incremental actuators. The actuator has no inherent limitation in stroke length, as every step or cycle adds only to the state at the beginning of the step or cycle and does not depend on the absolute position. This led to the alternative working title Hydraulic Infinite Linear Actuator. Linear incremental hydraulic actuator provides long stroke, high force, and linear motion and has the potential to decrease the necessary resource usage,minimize environmental impact, e.g. from potential oil spillage,extend the range of feasible products: longer, stiffer, better, etc. This thesis presents an analysis of the characteristics and properties of linear incremental hydraulic actuators as well as the gaits and possible realizations of some gaits. The gait for continuous, smooth motion with two cylinders is comprehensively studied and a control concept for the tracking problem is proposed. The control concept encapsulates the complexity of the linear incremental hydraulic actuator so that an application does not have to deal with it. One other gait, the ballistic gait, which realizes fast, energy-efficient motion, enabling energy recuperation is studied.

Download or read book Quantitative Evaluation of Systems written by Javier Campos and published by Springer. This book was released on 2015-08-21 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 12th International Conference on Quantitative Evaluation of Systems, QEST 2015, held in Madrid, Spain, in September 2015. The 19 papers presented were carefully reviewed and selected from 42 submissions. They are organized in topical sections named: modelling and applications; tools; petri nets, process algebra and fault trees; applications; and queuing systems and hybrid systems. The book also contains one full-paper invited talk.

Download or read book Fundamentals of Electric Aircraft written by Pascal Thalin and published by SAE International. This book was released on 2018-12-18 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Electric Aircraft was developed to explain what the electric aircraft stands for by offering an objective view of what can be expected from the giant strides in innovative architectures and technologies enabling aircraft electrification. Through tangible case studies, a deep insight is provided into this paradigm shift cutting across various aircraft segments – from General Aviation to Large Aircraft. Addressing design constraints and timelines foreseen to reach acceptable performance and maturity levels, Fundamentals of Electric Aircraft puts forward a general view of the progress made to date and what to expect in the years to come. Drawing from the expertise of four industry veterans, Pascal Thalin (editor), Ravi Rajamani, Jean-Charles Mare and Sven Taubert (contributors), it addresses futuristic approaches but does not depart too far from the operational down-to-earth realities of everyday business. Fundamentals of Electric Aircraft also offers analyses on how performance enhancements and fuel burn savings may bring more value for money as long as new electric technologies deliver on their promises.

Download or read book Energy Efficient Manufacturing written by John W. Sutherland and published by John Wiley & Sons. This book was released on 2018-07-04 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last several years, manufacturers have expressed increasing interest in reducing their energy consumption and have begun to search for opportunities to reduce their energy usage. In this book, the authors explore a variety of opportunities to reduce the energy footprint of manufacturing. These opportunities cover the entire spatial scale of the manufacturing enterprise: from unit process-oriented approaches to enterprise-level strategies. Each chapter examines some aspect of this spatial scale, and discusses and describes the opportunities that exist at that level. Case studies demonstrate how the opportunity may be acted on with practical guidance on how to respond to these opportunities.

Download or read book Service Robotics and Mechatronics written by Keiichi Shirase and published by Springer Science & Business Media. This book was released on 2009-10-24 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a world suffering from an ageing population and declining birth rate, service robotics and mechatronics have an increasingly vital role to play in maintaining a safe and sustainable environment for everyone. Mechatronics can be used in the reconstruction or restoration of various environments which we rely upon to survive; for example the reconstruction of a city after an earthquake, or the restoration of polluted waters This collection of papers was originally presented at the 7th International Conference on Machine Automation, 2008, in Awaji, Japan, and covers a variety of new trends in service robotics and mechatronics. Service Robotics and Mechatronics showcases the latest research in the area to provide researchers and scientists with an up-to-date source of knowledge and basis for further study, as well as offering graduate students valuable reference material.

Download or read book Advanced Hybrid Powertrains for Commercial Vehicles written by Haoran Hu and published by SAE International. This book was released on 2021-04-14 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powertrains for commercial vehicles have evolved since the late nineteenth-century invention of the ICE. In the revised second edition of Advanced Hybrid Powertrains for Commercial Vehicles, the authors explore commercial powertrains through history from the ICE through the introduction of the hybrid powertrain in commercial vehicles. Readers are given an understanding of the ICE as well as the classification of commercial vehicle hybrid powertrains, the variety of energy storage systems, fuel-cell hybrid powertrain systems, and commercial vehicle electrification. The authors review the legislation of vehicle emissions and the regulation necessary to promote the production of fuel-efficient vehicles.