Download or read book SiC Schottky Diodes and Polyphase Buck Converters written by Veda Prakash N. Galigekere and published by . This book was released on 2007 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: The turn-on characteristics of a SiC Schottky diode are analyzed theoretically, by simulation, and by experiment. The static characteristics of SiC Schottky diodes and Si junction diodes are analyzed for normal and high temperatures. The effects of diffusion capacitance and junction capacitance on the turn-off transition of SiC Schottky diode have been analyzed theoretically. The turn-off transition of a SiC Schottky barrier diode is analyzed by modeling the metal-semiconductor junction capacitance considering the linear and the non-linear effects. Behavior of the linear and the non-linear metal-semiconductor junction capacitance models are evaluated exper- imentally. The performance of SiC Schottky diodes is compared to the performance of similarly rated Si junction diodes. The effect of diode reverse-recovery current on the primary switch of a PFC boost converter is analyzed by the aid of PSPICE simulations. A 250 W, PFC boost con- verter is designed and simulated. In the 250 W PFC boost converter, the perfor- mance of SiC Schottky diode and similarly rated Si junction diodes are evaluated. The PSPICE simulation models of a SiC Schottky diode and two Si junction diodes are compared and some important parameters are discussed and their effect on the turn-off transition of the diodes are presented. The principle and advantages of polyphase operation of buck converters is ana- lyzed. The design equations for a two-phase buck converter operating in CCM are derived. A two-phase 6 V/120 W (PWM) buck converter is designed and simulated using PSPICE. The design equations are verified by PSPICE simulation results.

Download or read book High Efficiency Power Supply Using New SiC Devices written by Ashot Melkonyan and published by kassel university press GmbH. This book was released on 2007 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Pulse width Modulated DC DC Power Converters written by Marian K. Kazimierczuk and published by John Wiley & Sons. This book was released on 2008-09-15 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book studies switch-mode power supplies (SMPS) in great detail. This type of converter changes an unregulated DC voltage into a high-frequency pulse-width modulated (PWM) voltage controlled by varying the duty cycle, then changes the PWM AC voltage to a regulated DC voltage at a high efficiency by rectification and filtering. Used to supply electronic circuits, this converter saves energy and space in the overall system. With concept-orientated explanations, this book offers state-of-the-art SMPS technology and promotes an understanding of the principle operations of PWM converters, as well as enabling the readers to evaluate their characteristics. Design-orientated analysis (including a steady-state analysis for both continuous and discontinuous conduction modes) and numerous real-world practical examples (including circuit models of the PWM converters) demonstrate how to design these from scratch. The book provides an in-depth presentation of topologies of PWM DC-DC power converters, voltage- and current-mode control of PWM DC–DC power converters, considers power losses in all components, device stresses, output voltage ripple, converter efficiency and power factor correction (PFC). It also includes extensive coverage of the following: topologies of high-efficiency switching-mode PWM and soft-switching DC-DC power converters; DC voltage transfer functions (conversion ratios), component values, losses, efficiency, and stresses; small-signal averaged circuit models; current-mode and voltage-mode feedback controls; metal-oxide-semiconductor field-effect power transistors (MOSFETs); silicon (Si) and silicon carbide (SiC) power semiconductor devices. Before now, there has been no book that covers silicon carbide devices. Pulse-width Modulated DC-DC Power Converters is a comprehensive textbook for senior undergraduate and graduate students in the areas of electrical, electronics, and telecommunications engineering. It includes end-of-chapter review questions, problems, and thorough summaries of the key concepts to aid learning, and a Solutions Manual is available for professors. Scientists and practicing design engineers working with SMPS, within such applications as computers, telecommunications, industrial systems, automobile electronics, medical equipment, aerospace power technology, and radars (amongst others) will also find this text insightful.

Download or read book Comparative Analysis of High Input Voltage and High Voltage Conversion Ratio Step down Converters Equipped with Silicon Carbide and Ultrafast Silicon Diodes written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: DC to DC step-down applications with high input voltage and high voltage conversion ratio operational requirements, such as photovoltaic battery chargers, are subject to high conduction losses, high switching losses and substantial reverse-recovery losses when minority carrier principle diodes are used. The recent introduction of silicon carbide diodes with high breakdown voltages has made possible the elimination of reverse-recovery losses at high voltage levels and as such has sparked interest in their use due to the potential efficiency improvements. This report presents the results of a comprehensive analysis on the use of silicon carbide diodes and their counterparts, ultrafast silicon diodes, in conventional buck converters and isolated current-fed buck converters in high input voltage and high voltage conversion ratio step-down applications. The analysis illustrates both theoretically, with the use of steady-state average models, and experimentally the substantial efficiency benefits of the use of reverse-recovery free silicon carbide diodes in the conventional buck converter and the small but significant improvement in the efficiency of the isolated current-fed buck converter. The improvements of the conventional buck converter paired with silicon carbide diodes are shown to be significant enough to grant the variant the most efficient position for power levels below 1 kW. In addition, the four variants are categorized based on their cost and performance; therefore, providing engineers with a convenient guide to aid their selection of the appropriate converter depending on the operational requirements.

Download or read book Power Electronics Handbook written by Muhammad H. Rashid and published by Elsevier. This book was released on 2023-09-27 with total page 1472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics Handbook, Fifth Edition delivers an expert guide to power electronics and their applications. The book examines the foundations of power electronics, power semiconductor devices, and power converters, before reviewing a constellation of modern applications. Comprehensively updated throughout, this new edition features new sections addressing current practices for renewable energy storage, transmission, integration, and operation, as well as smart-grid security, intelligent energy, artificial intelligence, and machine learning applications applied to power electronics, and autonomous and electric vehicles. This handbook is aimed at practitioners and researchers undertaking projects requiring specialist design, analysis, installation, commissioning, and maintenance services. - Provides a fully comprehensive work addressing each aspect of power electronics in painstaking depth - Delivers a methodical technical presentation in over 1500 pages - Includes 50+ contributions prepared by leading experts - Offers practical support and guidance with detailed examples and applications for lab and field experimentation - Includes new technical sections on smart-grid security and intelligent energy, artificial intelligence, and machine learning applications applied to power electronics and autonomous and electric vehicles - Features new chapter level templates and a narrative progression to facilitate understanding

Download or read book Index to IEEE Publications written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1998 with total page 1234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues for 1973- cover the entire IEEE technical literature.

Download or read book Pulse Width Modulated DC DC Power Converters written by Marian K. Kazimierczuk and published by John Wiley & Sons. This book was released on 2015-08-13 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: PWM DC-DC power converter technology underpins many energy conversion systems including renewable energy circuits, active power factor correctors, battery chargers, portable devices and LED drivers. Following the success of Pulse-Width Modulated DC-DC Power Converters this second edition has been thoroughly revised and expanded to cover the latest challenges and advances in the field. Key features of 2nd edition: Four new chapters, detailing the latest advances in power conversion, focus on: small-signal model and dynamic characteristics of the buck converter in continuous conduction mode; voltage-mode control of buck converter; small-signal model and characteristics of the boost converter in the discontinuous conduction mode and electromagnetic compatibility EMC. Provides readers with a solid understanding of the principles of operation, synthesis, analysis and design of PWM power converters and semiconductor power devices, including wide band-gap power devices (SiC and GaN). Fully revised Solutions for all end-of-chapter problems available to instructors via the book companion website. Step-by-step derivation of closed-form design equations with illustrations. Fully revised figures based on real data. With improved end-of-chapter summaries of key concepts, review questions, problems and answers, biographies and case studies, this is an essential textbook for graduate and senior undergraduate students in electrical engineering. Its superior readability and clarity of explanations also makes it a key reference for practicing engineers and research scientists.

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1998 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Science Abstracts written by and published by . This book was released on 1995 with total page 1990 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Art of Electronics written by Paul Horowitz and published by . This book was released on 2021 with total page 1227 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Power Electronics Device Applications of Diamond Semiconductors written by Satoshi Koizumi and published by Woodhead Publishing. This book was released on 2018-06-29 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics Device Applications of Diamond Semiconductors presents state-of-the-art research on diamond growth, doping, device processing, theoretical modeling and device performance. The book begins with a comprehensive and close examination of diamond crystal growth from the vapor phase for epitaxial diamond and wafer preparation. It looks at single crystal vapor deposition (CVD) growth sectors and defect control, ultra high purity SC-CVD, SC diamond wafer CVD, heteroepitaxy on Ir/MqO and needle-induced large area growth, also discussing the latest doping and semiconductor characterization methods, fundamental material properties and device physics. The book concludes with a discussion of circuits and applications, featuring the switching behavior of diamond devices and applications, high frequency and high temperature operation, and potential applications of diamond semiconductors for high voltage devices. - Includes contributions from today's most respected researchers who present the latest results for diamond growth, doping, device fabrication, theoretical modeling and device performance - Examines why diamond semiconductors could lead to superior power electronics - Discusses the main challenges to device realization and the best opportunities for the next generation of power electronics

Download or read book Power Electronics Semiconductor Switches written by E. Ramshaw and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronic Semiconductor Switches is the successor to Professor Ramshaw's widely-used Power Electronics. The text has been completely re-written and expanded to focus on semiconductor switches, and to take into account advances in the field since the publication of Power Electronics and changes in electrical and electronic engineering syllabuses.

Download or read book Fundamentals of Power Electronics written by Robert W. Erickson and published by Springer Nature. This book was released on 2020-07-14 with total page 1081 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Power Electronics, Third Edition, is an up-to-date and authoritative text and reference book on power electronics. This new edition retains the original objective and philosophy of focusing on the fundamental principles, models, and technical requirements needed for designing practical power electronic systems while adding a wealth of new material. Improved features of this new edition include: new material on switching loss mechanisms and their modeling; wide bandgap semiconductor devices; a more rigorous treatment of averaging; explanation of the Nyquist stability criterion; incorporation of the Tan and Middlebrook model for current programmed control; a new chapter on digital control of switching converters; major new chapters on advanced techniques of design-oriented analysis including feedback and extra-element theorems; average current control; new material on input filter design; new treatment of averaged switch modeling, simulation, and indirect power; and sampling effects in DCM, CPM, and digital control. Fundamentals of Power Electronics, Third Edition, is intended for use in introductory power electronics courses and related fields for both senior undergraduates and first-year graduate students interested in converter circuits and electronics, control systems, and magnetic and power systems. It will also be an invaluable reference for professionals working in power electronics, power conversion, and analog and digital electronics.

Download or read book Principles of Power Electronics written by John G. Kassakian and published by Cambridge University Press. This book was released on 2023-08-03 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: Substantially expanded and updated, the new edition of this classic textbook provides unrivalled coverage of the fundamentals of power electronics. Comprehensive coverage of foundational concepts in circuits, magnetics, devices, dynamic models, and control establishes a strong conceptual framework for further study. Extensive discussion of contemporary practical considerations, enhanced by real-world examples, prepares readers for design scenarios ranging from low-power dc/dc converters to multi-megawatt ac machine drives. New topics include SiC and GaN wide-bandgap materials, superjunction MOSFET and IGBT devices, advanced magnetics design, multi-level and switched-capacitor converters, RF converter circuits, and EMI. Over 300 new and revised end-of-chapter problems enhance and expand understanding of the material, with solutions for instructors. Unique in its breadth and depth, and providing a range of flexible teaching pathways at multiple levels, this is the definitive guide to power electronics for graduate and senior undergraduate students in electrical engineering, and practicing electrical engineers.

Download or read book Advanced DC DC Power Converters and Switching Converters written by Salvatore Musumeci and published by MDPI. This book was released on 2021-03-30 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, power electronics is an enabling technology in the energy development scenario. Furthermore, power electronics is strictly linked with several fields of technological growth, such as consumer electronics, IT and communications, electrical networks, utilities, industrial drives and robotics, and transportation and automotive sectors. Moreover, the widespread use of power electronics enables cost savings and minimization of losses in several technology applications required for sustainable economic growth. The topologies of DC–DC power converters and switching converters are under continuous development and deserve special attention to highlight the advantages and disadvantages for use increasingly oriented towards green and sustainable development. DC–DC converter topologies are developed in consideration of higher efficiency, reliable control switching strategies, and fault-tolerant configurations. Several types of switching converter topologies are involved in isolated DC–DC converter and nonisolated DC–DC converter solutions operating in hard-switching and soft-switching conditions. Switching converters have applications in a broad range of areas in both low and high power densities. The articles presented in the Special Issue titled "Advanced DC-DC Power Converters and Switching Converters" consolidate the work on the investigation of the switching converter topology considering the technological advances offered by innovative wide-bandgap devices and performance optimization methods in control strategies used.

Download or read book Investigation of Reliability Aspects of Power Semiconductors in Photovoltaic Central Inverters for Sunbelt Regions written by Christian Felgemacher and published by kassel university press GmbH. This book was released on 2018-03-23 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: High reliability and system lifetimes in the range of 30 years are essential for renewable energy systems such as photovoltaic power plants to minimise costs for the generated electric energy. At the same time such systems are used in regions with high solar irradiance and also harsh environmental conditions. Therefore, designs for photovoltaic inverters need to meet not only the key design criteria of high conversion efficiency but also need to be very robust and at the same time meet challenging cost targets. In this dissertation aspects concerning the lifetime and reliability of power semiconductors in photovoltaic central inverters are investigated. On key topic of the dissertation is the measurement of the voltage dependent failure rate due to cosmic radiation induced single-event-burnout of SiC and Si power semiconductors. The second topic is the development of a system level simulation to quantify the stress on the power semiconductors in a PV central inverters in various regions of the world. Further topics are the investigation of improved control concepts for the cooling system of PV central inverters and the monitoring of IGBT temperatures during converter operation.

Download or read book Modelling and Control of Switched Reluctance Machines written by Rui Araújo and published by BoD – Books on Demand. This book was released on 2020-09-09 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, switched reluctance machines (SRMs) play an increasingly important role in various sectors due to advantages such as robustness, simplicity of construction, low cost, insensitivity to high temperatures, and high fault tolerance. They are frequently used in fields such as aeronautics, electric and hybrid vehicles, and wind power generation. This book is a comprehensive resource on the design, modeling, and control of SRMs with methods that demonstrate their good performance as motors and generators.