Download or read book Handbook of Yarn Production written by Peter R. Lord and published by Elsevier. This book was released on 2003-07-11 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by one of the world's leading experts, Handbook of yarn production: technology, science and economics is an authoritative and comprehensive guide to textile yarn manufacturing. The book is designed to allow readers to explore the subject in various levels of detail. The first three chapters provide an overview of yarn production, products and key principles. The major part of the book then reviews in detail the production processes for short-staple, long-staple and filament yarns.There are also chapters on quality control and the economics of staple-yarn production. The final part of the book consists of a series of appendices which provide in-depth analysis of key topics with detailed technical data and worked examples which is an invaluable reference in itself for anyone concerned with the behaviour, performance and economics of a textile mill. Handbook of yarn production: technology, science and economics is a standard work for both yarn manufacturers and those researching and studying in this important area of the textile industry. A practical and authoritative new handbook for yarn manufacturing Shows how problems can arise and how to deal with them Includes invaluable technical data, calculations, worked examples and case studies
Download or read book Short Staple Yarn Manufacturing written by Dan J. McCreight and published by Woodhead Publishing Limited. This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Short Staple Yarn Manufacturing presents the processing knowledge necessary to economically manufacture quality yarns from fibers that can range up to 63.5 millimeters (2.5 inches) in length. These yarns are typically referred to as short staple yarns and are generally produced on a sequence of machines that are together called the cotton system. Processing of fibers into short staple yarns is the subject of this textbook because these yarns are produced in large volume for use in fabric manufacturing. There are multiple processing steps, each of which has a number of critical control factors that must be known, measured, and reacted to routinely if the highest quality yarns are to be spun. McCreight, Feil, Booterbaugh, and Backe describe each process as well as how to best set up and manage that process. Important and unique features found in this book include the presentation of selected data that have resulted from in-plant applied research projects, clearly defined textile industry jargon, and a partial list of important questions that the successful yarn spinner must ask and answer in an on-going fashion. The audience addressed is primarily those persons responsible for the manufacturing environment of such a spun yarn facility. The text is also appropriate for students in college level textile courses. The early sections can be used as an introduction to short staple spun yarn manufacturing for high school students. This text is also appropriate for the libraries of all educational institutions where textile courses are offered and for the libraries of all yarn manufacturing companies and plants.
Download or read book Short Staple Yarn Manufacturing written by Dan McCreight and published by . This book was released on 1997-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Technology of Short staple Spinning written by Werner Klein and published by North Carolina State University. This book was released on 1986 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Short Staple Yarn Spinner s Handbook written by Dan J. McCreight and published by . This book was released on 1999-01-01 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Spun Yarn Technology written by Carl A. Lawrence and published by CRC Press. This book was released on 2003-03-28 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Existing textbooks covering the subject of yarn manufacture largely concentrate on describing the workings of machines. Fundamentals of Spun Yarn Technology presents complete coverage of yarn manufacture and technology and current research findings on the structure and properties of spun yarns. Written by a well-known and respected authority on textile technology, it not only introduces the subject, but it provides students with an advanced understanding of the various process stages. The book introduces the rudiments of staple yarn technology, covering the manufacturing process, the raw materials, and processes including short staple, worsted, semiworsted and woollen spinning, doubling, and specialty yarn processes. It also covers the more advanced studies in staple yarn technology, including new developments in fiber preparation technology, carding technology, roller drafting, gilling, ring spinning, open-end rotor spinning, air jet spinning and new research on unconventional spinning systems. This extensive range of topics, along with hundreds of tables and illustrations presented in Fundamentals of Spun Yarn Technology make it a comprehensive and up-to-date treatment of the field.
Download or read book Handbook of Yarn Production written by Peter R Lord and published by Woodhead Publishing. This book was released on 2003-07-11 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by one of the world's leading experts, Handbook of yarn production: technology, science and economics is an authoritative and comprehensive guide to textile yarn manufacturing. The book is designed to allow readers to explore the subject in various levels of detail. The first three chapters provide an overview of yarn production, products and key principles. The major part of the book then reviews in detail the production processes for short-staple, long-staple and filament yarns.There are also chapters on quality control and the economics of staple-yarn production. The final part of the book consists of a series of appendices which provide in-depth analysis of key topics with detailed technical data and worked examples which is an invaluable reference in itself for anyone concerned with the behaviour, performance and economics of a textile mill. Handbook of yarn production: technology, science and economics is a standard work for both yarn manufacturers and those researching and studying in this important area of the textile industry. A practical and authoritative new handbook for yarn manufacturing Shows how problems can arise and how to deal with them Includes invaluable technical data, calculations, worked examples and case studies
Download or read book A textbook on Yarn Manufacturing Vol ll written by Dr. Kathirvelu Subramanian, Mr. Gashaw Ashagre Walle, Mr. Bewuket Teshome Wagaye and published by Abhishek Publications. This book was released on 2021-01-01 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers the following chapters Chapter 1. review of yarn production. introduction, classification of yarns, staple fibre yarns, filament yarns, fancy yarns and staple fibre yarn manufacturing. Chapter 2. fibre to yarn staple fibre spinning preparation introduction, preparation of cotton and other short staple fibre, blow room accessories, the carding process, dual or tandem carding, the combing process, the drawing process and the roving process. Chapter 3. the ring spinning process introduction, functions of the ring spinning frame, package built of ring spinning frame, use of balloon control rings, use of separators, compact spinning and developments and limitations of ring spinning. Chapter 4. the rotor spinning process introduction, history of open end spinning, general concept of open end spinning, principle of rotor spinning, basic methods of open end spinning, structure of rotor yarn, the processing stages and economics of rotor spinning.
Download or read book A Text Book of Yarn Manufacturing Vol II written by Prof. Dr. Kathirvelu Subramaniam , Mr. Gashaw Ashagre Walle, Mr. Bewuket Teshome Wagaye and published by Abhishek Publications. This book was released on 2023-09-29 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers the following chapters Chapter 1. review of yarn production. introduction, classification of yarns, staple fibre yarns, filament yarns, fancy yarns and staple fibre yarn manufacturing. Chapter 2. fibre to yarn staple fibre spinning preparation introduction, preparation of cotton and other short staple fibre, blow room accessories, the carding process, dual or tandem carding, the combing process, the drawing process and the roving process. Chapter 3. the ring spinning process introduction, functions of the ring spinning frame, package built of ring spinning frame, use of balloon control rings, use of separators, compact spinning and developments and limitations of ring spinning. Chapter 4. the rotor spinning process introduction, history of open end spinning, general concept of open end spinning, principle of rotor spinning, basic methods of open end spinning, structure of rotor yarn, the processing stages and economics of rotor spinning.
Download or read book Yarn Production written by P. Lord and published by . This book was released on 1999-12 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced textbook covering all aspects of yarn production, dealing with the technologies for a range of products including both filament and staple yarns from fibre source to yarn cone or other final package. Subjects covered include filament yarn production, opening and carding for short-staple fibres, silver preparation, short and long-staple spinning, false-twist staple systems and the economics of staple-yarn production.
Download or read book Advances in Yarn Spinning Technology written by C A Lawrence and published by Elsevier. This book was released on 2010-09-27 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an invaluable single source of information on the advances in yarn spinning technologies. Advanced spinning systems are described and comparisons are made of the properties of the yarns produced, and resultant finished products, with those from conventional systems. Part one provides an introduction to yarn fibre spinning and structure. Chapters discuss the principles of ring spinning and open-end spinning of yarns. Yarn structure and properties from different spinning techniques and yarn structural requirements for knitted and woven fabrics are also examined. Part two covers advances in particular yarn spinning technologies. Topics range from siro spinning to compact spinning technology and air-jet spinning. Final chapters explore how to minimise fibre damage which occur during spinning and the use of spin finishes for textiles. With its distinguished editor and array of international contributors, Advances in yarn spinning technology is an important text for spinners, yarn manufacturers and fabric producers, as well as researchers, technicians, engineers and technologists in this sector of the textile industry. Documents advances in spinning technologies and presents comparisons between systems Assesses particular textile spinning technologies with specific chapters focusing on siro, compact, rotor, friction and air-jet spinning Reviews measures to minimise fibre damage caused by spinning are investigated with specific relevance to rotor and friction spinning
Download or read book Handbook of Weaving written by Sabit Adanur and published by CRC Press. This book was released on 2020-03-05 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: A mixture of science and art, weaving is nearly as old as human history. Despite the many technological advances in the field, however, it is still virtually impossible to control each individual fiber in a woven structure. To help you meet this and other weaving challenges, Handbook of Weaving covers every step of the process clearly and systemati
Download or read book The Technology of Short staple Spinning written by Werner Klein and published by . This book was released on 1998 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Textile Manufacturing Processes written by Faheem Uddin and published by BoD – Books on Demand. This book was released on 2019-08-28 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textile manufacturing is an important subject in textile programs and processing industries. The introduction of manmade and synthetic fibers, such as polyester, nylon, acrylic, cellulose, and Kevlar, among others, has greatly expanded the variety of textile products available today. In addition, new fiber development has brought about new machines for producing yarns, fabrics, and garments. Textile Manufacturing Processes is a collection of academic and research work in the field of textile manufacturing. Written by experts, chapters cover topics such as yarn manufacturing, fabric manufacturing, and garment and technical textiles. This book is useful for students, industry workers, and anyone interested in learning the fundamentals of textile manufacturing.
Download or read book Process Control in Ring Spinning written by R. Senthilkumar and published by Createspace Independent Publishing Platform. This book was released on 2016-05-19 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spinning is the process of producing continuous twisted strands (yarn) of a desired size from fibrous materials. Spinning can be categorized based on staple length as long staple spinning and short staple spinning. Short staple spinning machines process fibres such as cotton, polyester, viscose and its blends thereof. The yarn formation is usually accomplished by any one of the spinning systems. Spinning systems presently employed include ring, rotor, self-twist, friction, air-jet, twistless and wrap-spinning, with the first mentioned two systems by far the most important for cotton spinning, together accounting for far over 90% of the cotton yarn produced globally. The ring spinning invented by John Thorpe in 1830 has been very successful in producing yarns from staple fibres. Since its inception, ring spinning had remained unchallenged for almost 150 years. Ring-spinning accounts for some 75% of global long and short staple yarn production. The main reason attributed for the success of ring-spinning over other spinning systems is the superior quality, notably strength and evenness, of ring-spun yarns over those produced by other systems.
Download or read book A Textbook on Yarn Manufacturing Vol 1 written by Dr. Kathirvelu Subramanian and published by Abhishek Publications. This book was released on 2023-09-29 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book include following chapters:1 Raw Material for Spinning 2. Cotton( Raw Material) Mixing and Blending 3. Spinning Systems 4. Blow Room Operations
Download or read book Spun Yarn Technology written by Eric Oxtoby and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spun Yarn Technology provides a comprehensive review of the principles of spun yarn technology. Chapters are devoted to topics on spun yarn technology such as yarn production, properties of yarn, opening and cleaning loose fibers, fiber blending, the process of carding, and roller drafting, doubling, and fiber control. The spinning process, yarn folding, yarn preparation (winding, tensioning, splicing, and steaming and storage), and the kinds of specialty yarn are presented as well. Textile technologists will find the text very useful.
