Download or read book Short Methods written by and published by . This book was released on 2015-08-05 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Short Methods: A Treatise on Cutting, Designing Manufacturing Men's Clothing Drafting requires exactness. A pattern should never be cut in haste. Every measurement should be applied and each line drawn as though the entire pattern or set of patterns depended upon it along The slightest error may ruin many valuable yards of cloth. Again, no set of patterns should be put in use until thoroughly tested: that is, one or more garments made from them to see that they make up properly. Errors are easily made but are also easily corrected if corrected in time. The seam edges should be measured and compared to see that the garment will join up properly. On some classes of work one seam edge should be longer than the other. A seam to be joined on a Union Special Felling machine or similar machine should be from one-eighth to one-quarter inch longer on the under side than on the top to allow for the take-up of the feed. For the same reason a bias seam edge that is to be joined to a straight one should be cut from one-eighth to one-quarter inch shorter because the bias edge will stretch. A like principle applies to the different weight fabrics. A thick corduroy requires much more allowance for make-up than a light weight serge or worsted. These should not be cut from the same pattern. There should be at least one-half inch difference between them to insure the same results. Generally, corduroys are cut on a much larger scale than the lighter weight fabrics. Careful attention to these little points at the proper time will avoid many difficulties in regard to twisted garments and short sizes. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Short Methods written by Charles Albert Snodgrass and published by . This book was released on 1911 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Short Methods A Treatise on Cutting Designing Manufacturing Men s Clothing written by Charles Albert] 1876- [From [Snodgrass and published by Palala Press. This book was released on 2016-05-05 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work.This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work.As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Short Methods A Treatise on Cutting Designing and Manufacturing Men s Clothing written by Charles Albert Snodgrass and published by . This book was released on 2019-04-17 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Short Methods" is a vintage guide to tailoring with a particular focus on producing men's clothing. It contains simple instructions on and expert tips for designing, cutting, and making coats, vests, overcoats, trousers, overalls, jackets, and much more. Profusely-illustrated and easy-to-follow, this volume is ideal for tailors and those with an interest in making their own clothing. The drafts are simple, comprehensible, perfect and correct and are produced by the shortest method possible. Contents: Part 1 - Cutting includes, "Drafting", "The Square", "Coats", "Overcoats", "Sleeves", "Overalls", "Trousers", "Economy of Cutting" and more. Part 2 - Manufacturing, includes ", "System", "Time Keeping", "Equipment & Installation", "Special Machines", "Brief Points for the Novice", etc. Many vintage books such as this are increasingly scarce and expensive. It is with this in mind that we are republishing this volume now in an affordable, modern, high-quality edition complete with a specially-commissioned new introduction on dressmaking and tailoring.
Download or read book The Bookseller Newsdealer and Stationer written by and published by . This book was released on 1911 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Cumulative Book Index written by and published by . This book was released on 1912 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Standard Work on Cutting written by and published by . This book was released on 1990 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Bulletin of the Public Library of the District of Columbia written by District of Columbia. Public Library and published by . This book was released on 1907 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Practical Guide for the Tailor s Cutting room written by Joseph Couts and published by . This book was released on 1848 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Bulletin of the Public Library of the District of Columbia written by and published by . This book was released on 1907 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gordon s Work on Cutting Mens Garments written by Selden Smith Gordon and published by Forgotten Books. This book was released on 2016-10-07 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Gordon's Work on Cutting Mens' Garments: A Complete Treatise on the Art and Science of Delineating All Garments for Men; Especially Prepared for Self-Instruction In all these explanations, whenever the fractions %3, M, }6, etc., are used, unless expressly stated otherwise, they are according to the several divisions of one-half of the full size of the breast, waist or seat, as are to be found on the face side of the square shown on the illustration. For example: The distance from any one point to another is given as waist, the full waist being, say 32 inches. To determine the distance find half of 32, which is 16, on the divi sions of fourths, which you will find is at B on the illustration. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book A Treatise on Cutting Garments to Fit the Human Form written by N y ) Scott & Wilson (New York and published by Legare Street Press. This book was released on 2023-07-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in the mid-19th century, this classic guide to garment cutting is still valuable for tailors, fashion designers, and anyone interested in the craft of sewing. With 50 diagrams and designs reduced to mathematical principles, Scott & Wilson provide a unique blend of art and science. This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work is in the "public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Indiana Authors and Their Books 1917 1966 written by and published by . This book was released on 1974 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book American Garment Cutter written by and published by . This book was released on 1914 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Men s Garments 1830 1900 written by Ronald I. Davis and published by . This book was released on 1994 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to pattern drafting for men's period costume: measurement and construction of dress coats, frock coats and morning coats, jackets, trousers, waistcoats and top coats, fully detailed. Revised: includes tailoring notes, alternate style and design cross-reference, more detailed patterns and over 175 costume illustrations -- fashion plates, photos and drawings.--Back cover.
Download or read book The American Garment Cutter written by Samuel Regal and published by Forgotten Books. This book was released on 2016-09-30 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from The American Garment Cutter: A Complete, Practical Up-to-Date Treatise on the Cutting of Men's Garments According to the Most Approved Method The publication of the first and second editions of this work marked an era in the history of cutting, as it was the introduction of a Self - Instructor that eu abled the student to intelligently understand a system that was Simple, Concise and Practical. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book The American Garment Cutter written by Samuel Regal and published by . This book was released on 1914 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt:
