Download or read book Shop and Foundry Management written by Stuart Dean and published by . This book was released on 1913 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shop and Foundry Management Classic Reprint written by Stuart Dean and published by . This book was released on 2015-08-05 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Shop and Foundry Management For the most part this volume consists of articles written for The Iron Age, Mr. Deans purpose being to present everyday shop and foundry methods that have resulted in lower cost and greater output. As superintendent of the Dean Brothers Steam Pump Works, Indianapolis, Ind., in the past thirteen years, the author has constantly aimed at four things: Reduction in cost of production; increase in plant capacity through greater efficiency; quick deliveries, and a perfect product. Mr. Dean, who is nephew of the proprietors, was put in charge of the Indianapolis plant thirteen years ago at the age of 25. The product is pumps ranging from 24 to 50, 000 pounds, some of them designed by the author, who also designed and built a number of special machines to turn out the work. Among these is a 6-foot boring and milling machine having a 48-inch milling cutter head. Mr. Dean worked in every department of the Indianapolis plant. He had a common school and high school education. Working in the shop in vacations from an early age, before he was out of school he had learned the machinists trade. At eighteen he quit school and went to work in the foundry, learning this trade. He was specially instructed in all branches of operation, with the idea of eventually taking charge. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book SHOP AND FOUNDRY MANAGEMENT written by STUART. DEAN and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shop and Foundry Management written by Stuart Dean and published by Legare Street Press. This book was released on 2023-07-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a practical guide to the management of machine shops and foundries. The author provides valuable insights into the technical and administrative aspects of production management. The book is an essential resource for professionals involved in the manufacturing industry. This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work is in the "public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Shop and Foundry Practice Vol 1 Classic Reprint written by International Correspondence Schools and published by Forgotten Books. This book was released on 2018-01-12 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Shop and Foundry Practice, Vol. 1 A surface may be defined as the outline Of a solid; it has the shape Of a solid, but is without thickness. For example, when a pattern lies in its mold, that part Of the pattern that comes in contact with the sand is called the surface of the pattern. Again, as we all know, a soap bubble is very thin; it has air inside Of it and its outside is also in contact with air; that part touched by the air inside is called the inside surface, and the part touched by the air outside is called the outside surface. Now, if the thickness of the bubble could be diminished indefinitely until there was absolutely no thickness at all, there would of course be no bubble, but we could imagine the outline or form Of the bubble as still remaining, and this outline or form would be the surface. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Maximum Production in Machine Shop and Foundry Classic Reprint written by C. E. Knoeppel and published by Forgotten Books. This book was released on 2018-03-06 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Maximum Production in Machine-Shop and Foundry The material on which the present book is based was most of it contained in three series of articles published originally in The Engineering Magazine at various times from October, 1908, to May, 1911. It was all written in the very atniosphere of the busy manufacturing plant and under the influence of daily contact with the problems and methods dis cussed. Everything in it represents some phase or period of the author's personal experience. As here gathered in volume form, however, the material is all resurveyed, rearranged, largely recast, from the view point of a larger experience and a maturer study of the mechanical industries and more advanced prin ciples and methods of management. The result is a logical, well-proportioned and well-balanced de velopment of the subject from beginning to end, by which the relations of all its elements will be much more clearly understood. The discussion will be followed again with new and increased interest and reward, even by those who read the articles as they appeared in sequence in The Engineering Maga zlne. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book SHOP FOUNDRY MGMT written by Stuart 1875 Dean and published by Wentworth Press. This book was released on 2016-08-27 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Shop and Foundry Management Primary Source Edition written by Stuart Dean and published by . This book was released on 2013-10 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Foundry Vol 26 written by and published by Forgotten Books. This book was released on 2017-12-14 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from The Foundry, Vol. 26: March, 1905 This illuminated the scene around the cu pola, the more remote corners of the shop being lighted by bits of waste burning in shallow tins of oil. The roof of this shop was propped up by pieces of old rails from a convenient railroad and in the smoke, steam and gloom of casting time, these rails were invisible and collisions not unfrequently occurred. It was one of these collisions in which I figured, together with a bull ladle of iron. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Foundry Work Vol 2 written by William C. Stimpson and published by Forgotten Books. This book was released on 2018-01-29 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Foundry Work, Vol. 2: Instruction Paper The loam molder requires the greatest all-around skill in the whole range of foundry work. He must know all the tricks of core room and dry sand shop, and most of those in green sand. Added to all this he must have a practical working knowledge of the principles of drawing and must possess to a large degree the foresight of the designer. In order to save time and lumber in the pattern shop, only a set of sweeps are provided if the mold is simple, and these with blue prints of the piece wanted, is all the molder has to work from. In intricate work, such as a modern Corliss cylinder, a skeleton pattern carrying the steam chests, etc., in accurate position is made. And in some very crooked work a pattern is furnished complete. As a rule, how ever, the loam molder must rely upon his own skill and ingenuity for the best method of constructing each detail of the work. Rigging. The equipment for the loam floor varies in different shops. In Fig. 93 is shown the essential features of an equipment for sweeping up circular forms. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Cyclopedia of Modern Shop Practice Vol 3 written by Howard Monroe Raymond and published by Forgotten Books. This book was released on 2017-07-16 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Cyclopedia of Modern Shop Practice, Vol. 3: A Manual of Shop Practice, Pattern Making, Machine Design, Foundry and Machine Shop Work, Forging, Tool Making, Sheet Metal Work, Steam, Refrigeration, Electricity, Etc Manager Cranberry Furnace Co Ameri can Institute Mining Engineers. Formerly Instructor Mass. Institute of Technology. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Foundry Manual written by United States Navy and published by . This book was released on 2006-03-01 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Manual is intended primarily for use by foundry personnel aboard repair ships and tenders. The recommended practices are based on procedures proved workable under Navy conditions and are supplemented by information from industrial sources. The Manual is divided into two general sections. The first section, chapters 1 through 13, contains information of a general nature, such as "How Metals Solidify," "Designing a Casting," "Sands for Molds and Cores," "Gates, Risers, and Chills," and "Description and Operation of Melting Furnaces." Subjects covered in these chapters are generally applicable to all of the metals that may be cast aboard ship. The second section, chapters 14 through 21, contains information on specific types of alloys, such as "Copper-Base Alloys," "Aluminum-Base Alloys," "Cast Iron," and "Steel." Specific melting practices, suggestions for sand mixes, molding practices, gating, and risering are covered in these chapters. This manual has been written with the "how-to-do-it" idea as the principal aim. Discussions as to the "why" of certain procedures have been kept to a minimum. This manual contains information that should result in the production of consistently better castings by repair ship personnel.
Download or read book The United States Catalog written by Mary Burnham and published by . This book was released on 1928 with total page 1612 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Run Your Shop Without It Running You written by Brad Simon and published by Createspace Independent Pub. This book was released on 2012-12-17 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Guide to Efficient Shop Management, Run Your Shop Without It Running You offers jewelers useful advice to managing their shop. Take-In Procedures, Setting-Up a Shop, Pricing Repairs, and Productivity in the Shop are just a few of the subjects covered. With over one hundred and fifty pages of information, illustrations, and worksheets, this is the most comprehensive book on Shop Management available today. This Valuable Guide Is A Must In Every Jewelry Store Learn a variety of methods to improve profitability of the jewelry shop. Including; how to set correct prices, improve scrap material management, and avoiding costly mistakes at the take-in counter. Learn methods of increasing productivity without sacrificing quality. Including; organizing and scheduling jobs, shop design, organizing the bench, motivating the bench jeweler, and many other topics. Run Your Shop Without It Running You will show you how you can have a shop that is efficient and profitable. In the ever-changing business environment, retail jewelers are compelled to make every aspect of their business profitable. If a store is to survive in the future, not only can it not support a loss in the shop; the shop must contribute to the profits of the store. In the years ahead, the shop may very well be the most important asset for the independent retail jeweler. It Is Now More Important Then Ever To Operate The Shop Professionally And Profitably. The business environment has changed over the years, and business practices must change along with it. No longer can the shop be the Necessary Evil, the Achilles Heel of the retail jewelry industry. The shop must be able to stand on its own and provide its share of profits to the store. Then, the store will not just survive in the future, it will THRIVE. In 1999 Bench Media first published Run Your Shop Without It Running You and is the Best Selling book on Jewelry Shop Management. Here is what other has said about this book: “All in all, the book is a no-nonsense guide to running a tight repair shop – It's A Must Read.”INSTORE Magazine “For too many years jewelry storeowners have believed the fallacy the shop can't be a profit center. Brad Simon destroys that notion step-by-step with a practical book that shows owners and shop mangers the keys to profitability.”Professional Jeweler Magazine “This is the best book on setting up and running a shop that I have ever seen. It is a must for every jewelry store and every jeweler should read it.”Andy 'The Tool Guy' Kroungold “Brad is one of the few people who understand how to make a profit in the shop and how to set prices. If you have a shop or are going to install one, you should buy this book. It's great on setting things up in an orderly fashion for best efficiency, which speeds things up and lowers cost. Buy this book; it's a good one.”David Geller “This is going to be one of those classic books that comes to mind whenever someone asks about going into the trade or gets serious about making their shop profitable. There is a lot of practical business sense and many bench tips.”John Caro “Brad Simon reviews much that should be common sense, but unfortunately is often overlooked. It is good to see it laid out and explained for a bench jeweler's perspective. Thanks Brad for such an informative manual.”Tony Baldwin “Brad Simon has taken a potentially boring subject and made it interesting to read. His years at the bench are obvious from the detailed descriptions of what goes on in the shop.” David Lantz “Very well done. An excellent reference guide and tool for jewelers. Jewelers will definitely benefit from this book. I recommend it to all.”Arthur Gordon
Download or read book Book Review Digest written by and published by . This book was released on 1912 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Machine shop Practice written by Joshua Rose and published by . This book was released on 1887 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Foundry Management Technology written by and published by . This book was released on 1970 with total page 1292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
