Download or read book Shock Waves Measuring The Dynamic Response Of Materials written by Isbell William M and published by World Scientific. This book was released on 2005-01-27 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents, in a concise and comprehensive manner, the essential techniques by which shock wave physicists probe the boundaries of material response to impulsive loads. The author is a well-known figure in shock wave physics, having worked for over forty years with many of the outstanding researchers in the field.The book acquaints readers both with modern instrumentation techniques including interferometers such as the DISAR and the VISAR — and with methods that have been established by previous generations of experimentalists — including acoustic measurement techniques and low to moderate strain rate machines.Besides an exposition of the theoretical aspects of shock wave phenomena, it contains large amounts of data on equations of state, spallation thresholds, shock wave attenuation from very high pressures, and elastic constants. Much of this information has been previously unavailable in open publications.The text documents the transition from testing performed with explosives to the use of modern compressed gas guns, which permit much more detailed diagnostics and controlled conditions. In particular, the author pioneered the use of two-stage light gas guns which launch high-density plates against specimens located at the muzzle. The high launch velocity of these guns produced data that represents the highest pressures obtained in the free world at that time./a
Download or read book Use of Time resolved Wave Profile Techniques for Dynamic Material Property Measurements Review and Prospects for the Future written by and published by . This book was released on 1998 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shock wave techniques have become a standard tool for studying the high pressure dynamic response of materials. An important advance in this field is the development of techniques for making detailed measurements of the time-resolved wave structure in shock and release waves. These techniques began with the development of stress wave gauges in the early 1960s and have evolved into a variety of high-resolution techniques being used in present shock physics applications. This paper provides a brief review of the development and use of time-resolved interferometer techniques for studying the high pressure dynamic response of materials. Applications of these techniques include studies of the initial compressive yield response of materials, plastic viscosity occurring during shock compression, measurements of compressive and tensile yield strength after passage of strong shock waves, and measurements of the kinetic properties of phase transitions. Dynamic material properties obtained from these measurements are important in developing predictive material models important to Science Based Stockpile Stewardship and in validating the equation of state and constitutive response of material models being used in a variety of applications. Examples are given which illustrate the importance of these measurements in current weapon physics and in other non-weapon applications. Prospects for extending these techniques for use with pulsed radiation sources, such as z pinch accelerators, are also discussed.
Download or read book Shock Wave Science and Technology Reference Library Vol 3 written by Yasuyuki Horie and published by Springer Science & Business Media. This book was released on 2008-09-18 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the second volume of Solids Volumes in theShockWaveScience and Technology Reference Library. These volumes are primarily concerned with high-pressure shock waves in solid media, including detonation and hi- velocity impact and penetration events. This volume contains four articles. The ?rst two describe the reactive behavior of condensed-phase explosives, and the remaining two discuss the inert, mechanical response of solid materials. The articles are each se- contained, and can be read independently of each other. They o?er a timely reference, for beginners as well as professional scientists and engineers, cov- ing the foundations and the latest progress, and include burgeoning devel- ment as well as challenging unsolved problems. The ?rst chapter, by S. She?eld and R. Engelke, discusses the shock initiation and detonation phenomena of solids explosives. The article is an outgrowth of two previous review articles: “Explosives” in vol. 6 of En- clopedia of Applied Physics (VCH, 1993) and “Initiation and Propagation of Detonation in Condensed-Phase High Explosives” in High-Pressure Shock Compression of Solids III (Springer, 1998). This article is not only an - dated review, but also o?ers a concise heuristic introduction to shock waves and condensed-phase detonation. The authors emphasize the point that d- onation is not an uncontrollable, chaotic event, but that it is an orderly event that is governed by and is describable in terms of the conservation of mass, momentum, energy and certain material-speci?c properties of the explosive.
Download or read book Dynamic Behavior of Materials written by Mikko Hokka and published by Elsevier. This book was released on 2023-11-21 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Behavior of Materials: Fundamentals, Material Models, and Microstructure Effects provides readers with the essential knowledge and tools necessary to determine best practice design, modeling, simulation and application strategies for a variety of materials while also covering the fundamentals of how material properties and behavior are affected by material structure and high strain rates. The book examines the relationships between material microstructure and consequent mechanical properties, enabling the development of materials with improved performance and more effective design of parts and components for high-rate applications. Sections cover the fundamentals of dynamic material behavior, with chapters studying dynamic elasticity and wave propagation, dynamic plasticity of crystalline materials, ductile fracture, brittle fracture, adiabatic heating and strain localization, response to shock loading, various material characterization methods, such as the Hopkinson Bar Technique, the Taylor Impact Experiment, different shock loading experiments, recent advances in dynamic material behavior, the dynamic behaviors of nanocrystalline materials, bulk metallic glasses, additively manufactured materials, ceramics, concrete and concrete-reinforced materials, geomaterials, polymers, composites, and biomaterials, and much more. Focuses on the relationship between material microstructure and resulting mechanical responses Covers the fundamentals, characterization methods, modeling techniques, applications and recent advances of the dynamic behavior of a broad array of materials Includes insights into manufacturing and processing techniques that enable more effective material design and application
Download or read book Material Properties under Intensive Dynamic Loading written by Mikhail V. Zhernokletov and published by Springer Science & Business Media. This book was released on 2007-07-16 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the physical and thermomechanical response of materials subjected to intensive dynamic loading is a challenge of great significance in engineering today. This volume assumes the task of gathering both experimental and diagnostic methods in one place, since not much information has been previously disseminated in the scientific literature.
Download or read book Dynamic Response of Materials to Intense Implusive Loading written by United States. Air Force Department and published by . This book was released on 1973 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shock Waves in Condensed Matter written by Y. M. Gupta and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fourth American Physical Society Topical Conference on Shock Waves in Condensed Matter was held in Spokane, Washington, July 22-25, 1985. Two hundred and fifty scientists and engineers representing thirteen countries registered at the conference. The countries represented included the United States of America, Australia, Canada, The People's Repub lic of China, France, India, Israel, Japan, Republic of China (Taiwan), United Kingdom, U. S. S. R, Switzerland and West Germany. One hundred and sixty-two technical papers, cov ering recent developments in shock wave and high pressure physics, were presented. All of the abstracts have been published in the September 1985 issue of the Bulletin of the American Physical Society. The topical conferences, held every two years since 1979, have become the principal forum for shock wave studies in condensed materials. Both formal and informal technical discussions regarding recent developments conveyed a sense of excitement. Consistent with the past conferences, the purpose of this conference was to bring together scientists and engineers studying the response of condensed matter to dynamic high pressures and temperatures. Papers covering experimental, theoretical, and numerical studies of con densed matter properties were presented. A noteworthy feature of this conference was the participation by several leading scientists engaged in static high pressure research. Donald Curran served as the Master of Ceremonies at the conference banquet, which was at tended by two hundred and seventy-five conference participants and guests including Dr. Samuel Smith, the new President of Washington State University. Dr.
Download or read book Shock Waves in Condensed Matter 1983 written by J.R. Asay and published by Elsevier. This book was released on 2012-12-02 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shock Waves in Condensed Matter – 1983 covers the proceedings of the American Physical Society Topical Conference, held in Santa Fe, New Mexico on July 18-21, 1983. The book focuses on the response of matter to dynamic high pressure and temperature. The selection first elaborates on the review of theoretical calculations of phase transitions and comparisons with experimental results; theoretical and experimental studies of shock-compressed benzene and polybutene; and theory of the iron equation of state and melting curve to very high pressures. The text then ponders on nonhydrostatic effects in stress-wave induced phase transformation of calcite; Bauschinger effect model suitable for use in large computer codes; and strain rate sensitivity prediction for porous bed compaction. The manuscript takes a look at flaw nucleation and energetics of dynamic fragmentation, shock loading behavior of fused quartz, and aluminum damage simulation in high-velocity impact. Shock wave diagnostics by time-resolved infrared radiometry and non-linear Raman spectroscopy; Raman scattering temperature measurement behind a shock wave; and experiments and simulation on laser-driven shock wave evolution in aluminum targets are also discussed. The selection is a dependable reference for scientists and readers interested in the response of matter when exposed to dynamic high pressure and temperature.
Download or read book Structural Dynamics of Electronic and Photonic Systems written by Ephraim Suhir and published by John Wiley & Sons. This book was released on 2011-04-04 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proposed book will offer comprehensive and versatile methodologies and recommendations on how to determine dynamic characteristics of typical micro- and opto-electronic structural elements (printed circuit boards, solder joints, heavy devices, etc.) and how to design a viable and reliable structure that would be able to withstand high-level dynamic loading. Particular attention will be given to portable devices and systems designed for operation in harsh environments (such as automotive, aerospace, military, etc.) In-depth discussion from a mechanical engineer's viewpoint will be conducted to the key components’ level as well as the whole device level. Both theoretical (analytical and computer-aided) and experimental methods of analysis will be addressed. The authors will identify how the failure control parameters (e.g. displacement, strain and stress) of the vulnerable components may be affected by the external vibration or shock loading, as well as by the internal parameters of the infrastructure of the device. Guidelines for material selection, effective protection and test methods will be developed for engineering practice.
Download or read book Shock Wave Phenomena and the Properties of Condensed Matter written by Gennady I. Kanel and published by Springer Science & Business Media. This book was released on 2004-03-30 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the main goals of investigations of shock-wave phenomena in condensed matter is to develop methods for predicting effects of explosions, high-velocity collisions, and other kinds of intense dynamic loading of materials and structures. Based on the results of international research conducted over the past 30 years, this book is addressed not only to experts in shock-wave physics, but also to interested representatives from adjacent fields of activity and to students who seek an introduction to the current issues. With that goal in mind, the book opens with a brief account of the theoretical background and a short description of experimental techniques. The authors then progress to a systematic treatment of special topics, some of which have not been fully addressed in the literature to date.
Download or read book Shock Wave and High Strain Rate Phenomena in Materials written by 0 Meyers, and published by CRC Press. This book was released on 2023-07-21 with total page 1852 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of EXPLOMET 90, the International Conference on the Materials Effects of Shock-Wave and High-Strain-Rate Phenomena, held August 1990, in La Jolla, California, represent a global and up-to-date appraisal of this field. Contributions (more than 100) deal with high-strain-rate deforma
Download or read book Explosive Blast Injuries written by Zhengguo Wang and published by Springer Nature. This book was released on 2023-03-22 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a systematic summary of a series of achievements of blast injury studies in China and the latest progress in blast injury treatment including injuries caused by various explosion accidents (such as coal mine gas explosion, and chemical explosion) and terrorist bombing around the world over the past three decades. The book not only covers comprehensive introductions to the knowledge and injury theories about explosive shock waves, but also expounds the prevention and treatment of various explosion shock injuries and their complications with generalized summaries. This book not only contains a diverse range of content, but also immense practicality. It elaborates on the causes of various types of explosion and impact injuries, as well as protection and treatment measures, serving not only as an important basis and technical support for military health service support in modern warfare, but is also extremely important in providing practical value in peacetime disaster prevention, mitigation and relief for patients.
Download or read book Impactful Times written by James R. Asay and published by Springer. This book was released on 2017-05-02 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a history of shock compression science, including development of experimental, material modeling, and hydrodynamics code technologies over the past six decades at Sandia National Laboratories. The book is organized into a discussion of major accomplishments by decade with over 900 references, followed by a unique collection of 45 personal recollections detailing the trials, tribulations, and successes of building a world-class organization in the field. It explains some of the challenges researchers faced and the gratification they experienced when a discovery was made. Several visionary researchers made pioneering advances that integrated these three technologies into a cohesive capability to solve complex scientific and engineering problems. What approaches worked, which ones did not, and the applications of the research are described. Notable applications include the turret explosion aboard the USS Iowa and the Shoemaker-Levy comet impact on Jupiter. The personal anecdotes and recollections make for a fascinating account of building a world-renowned capability from meager beginnings. This book will be inspiring to the expert, the non expert, and the early-career scientist. Undergraduate and graduate students in science and engineering who are contemplating different fields of study should find it especially compelling.
Download or read book Shock Phenomena in Granular and Porous Materials written by Tracy J. Vogler and published by Springer Nature. This book was released on 2019-09-04 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Granular forms of common materials such as metals and ceramics, sands and soils, porous energetic materials (explosives, reactive mixtures), and foams exhibit interesting behaviors due to their heterogeneity and critical length scale, typically commensurate with the grain or pore size. Under extreme conditions of impact, granular and porous materials display highly localized phenomena such as fracture, inelastic deformation, and the closure of voids, which in turn strongly influence the bulk response. Due to the complex nature of these interactions and the short time scales involved, computational methods have proven to be powerful tools to investigate these phenomena. Thus, the coupled use of experiment, theory, and simulation is critical to advancing our understanding of shock processes in initially porous and granular materials. This is a comprehensive volume on granular and porous materials for researchers working in the area of shock and impact physics. The book is divided into three sections, where the first presents the fundamentals of shock physics as it pertains to the equation of state, compaction, and strength properties of porous materials. Building on these fundamentals, the next section examines several applications where dynamic processes involving initially porous materials are prevalent, focusing on the areas of penetration, planetary impact, and reactive munitions. The final section provides a look at emerging areas in the field, where the expansion of experimental and computational capabilities are opening the door for new opportunities in the areas of advanced light sources, molecular dynamics modeling, and additively manufactured porous structures. By intermixing experiment, theory, and simulation throughout, this book serves as an excellent, up-to-date desk reference for those in the field of shock compression science of porous and granular materials.
Download or read book Dynamic Behavior of Materials Volume 1 written by Dan Casem and published by Springer. This book was released on 2016-10-14 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Behavior of Materials, Volume 1 of the Proceedings of the 2016 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the first volume of ten from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers on: Quantitative Visualization Fracture & Fragmentation Dynamic Behavior of Low Impedance Materials Shock & Blast Dynamic Behavior of Composites Novel Testing Techniques Hybrid Experimental & Computational Methods Dynamic Behavior of Geo-materials General Material Behavior
Download or read book High Pressure Shock Compression of Solids VII written by Vladimir E. Fortov and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting some of the most recent results of Russian research into shock compression, as well as historical overviews of the Russian research programs into shock compression, this volume will provide Western researchers with many novel ideas and points of view. The chapters in this volume are written by leading Russian specialists various fields of high-pressure physics and form accounts of the main researches on the behavior of matter under shock-wave interaction. The experimental portions contain results of studies of shock compression of metals to high and ultra-high pressure, shock initiation of polymorphic transformations, strength, fracture and fragmentation under shock compression, and detonation of condensed explosives. There are also chapters on theoretical investigations of shock-wave compression and plasma states in regimes of high-pressure and high- temperature. The topics of the book are of interest to scientists and engineers concerned with questions of material behavior under impulsive loading and to the equation of state of matter. Application is to questions of high-speed impact, inner composition of planets, verification of model representations of material behavior under extreme 1oading conditions, syntheses of new materials, development of new technologies for material processing, etc. Russian research differs from much of the Western work in that it has traditionally been wider-ranging and more directed to extremes of response than to precise characterization of specific materials and effects. Western scientists could expect to benefit from the perspective gained from close knowledge of the Russian work.
Download or read book Shock Waves in Solid State Physics written by G.I. Kanel' and published by CRC Press. This book was released on 2019-04-30 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods and the latest results of experimental studies of the strength properties, polymorphism and metastable states of materials and substances with extremely short durations of shock-wave action are presented. The author provides a comprehensive and theoretical description of specific features of the dynamics of elastoplastic shock compression waves in relaxing media. The presentation is preceded by a detailed description of the theoretical foundations of the method and a brief discussion of the basic methods of generating and diagnosing shock waves in solids. Key Selling Features: Addresses dynamic elastic-plastic response, spallation, and shock-induced phase transformation. Provides a centralized presentation of topics of interest to the shock physics community Presents new data on the mechanism and basic patterns of sub-microsecond polymorphic transformations and phase transitions. Investigates destruction waves in shock-compressed glasses. Analyzes the behavior of highly hard brittle materials under shock-wave loading and ways to diagnose fracture.