EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Cat  chisme de la gr  ce

Download or read book Cat chisme de la gr ce written by and published by . This book was released on with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Shock Sensitivity of LX 04 Containing Delta Phase HMX at Elevated Temperatures

Download or read book Shock Sensitivity of LX 04 Containing Delta Phase HMX at Elevated Temperatures written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: LX-04 is a widely used HMX-based plastic bonded explosive, which contains 85 weight% HMX and 15 weight% Viton binder. The sensitivity of LX-04 to a single stimulus such as heat, impact, and shock has been previously studied. However, hazard scenarios can involve multiple stimuli, such as heating to temperatures close to thermal explosion conditions followed by fragment impact, producing a shock in the hot explosive. The sensitivity of HMX at elevated temperatures is further complicated by the beta to delta solid-state phase transition, which occurs at approximately 165 C. This paper presents the results of shock initiation experiments conducted with LX-04 preheated to 190 C, as well as density measurements and small scale safety test results of the[delta] phase HMX at room temperature. This work shows that LX-04 at 190 C is more shock sensitive than LX-04 at 150 C or 170 C due to the volume increase during the[beta] to[delta] solid phase transition, which creates more hot spots, and the faster growth of reaction during shock compression.

Book Shock Sensitivity of LX 04 at 150C

Download or read book Shock Sensitivity of LX 04 at 150C written by and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Hazard scenarios can involve multiple stimuli, such as heating followed by fragment impact (shock). The shock response of LX-04 (85 weight % HMX and 15 weight % Viton binder) preheated to temperatures near 150 C is studied in a 10.2 cm bore diameter gas gun using embedded manganin pressure gauges. The pressure histories at various depths in the LX-04 targets and the run distances to detonation at several input shock pressures are measured and compared to those previously obtained in ambient temperature and 170 C LX-04. Since the beta to delta phase transition in HMX occurs at 165 C, these experiments are designed to determine whether the observed increase in shock sensitivity is due in part to the 6% volume expansion caused by this phase transition. The experimental shows that LX-04 exhibits the same sensitivity at 150 C and 170 C. The Ignition and Growth reactive flow model developed for 170 C LX-04 works equally well for LX-04 at 150 C.

Book Shock Compression of Condensed Matter  2003

Download or read book Shock Compression of Condensed Matter 2003 written by Michael D. Furnish and published by . This book was released on 2004 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two volumes contain 350 papers presented at the 13th Biennial International Conference of the APS Topical Group on Shock Compression of Condensed Matter (Portland, Oregon, July 2003). One of the three plenary lectures was given by James Asay (Institute for Shock Physics, Washington State U., Pullman, Washington) on wave structure studies in condensed matter physics. The papers in v.1 address nonenergetic materials; energetic materials; phase transitions; the modeling, simulation, theory, and molecular dynamics modeling of nonreactive and reactive materials; spall, fracture, and fragmentation; constitutive and microstructural properties of metals; mechanical properties of polymers and composites; and mechanical properties of ceramics, glasses, ionic solids, and liquids. The largest number of papers in v.2 are under the headings mechanical properties of reactive materials; detonation and burn phenomena; explosive and initiation studies; experimental techniques; and geophysics, structures, and medical applications. The contributors represent 14 countries, where they work in state and private industry and academic settings. Indexed by both author and subject. Annotation :2004 Book News, Inc., Portland, OR (booknews.com).

Book Shock Wave Compression of Condensed Matter

Download or read book Shock Wave Compression of Condensed Matter written by Jerry W Forbes and published by Springer Science & Business Media. This book was released on 2013-02-01 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the core concepts of the shock wave physics of condensed matter, taking a continuum mechanics approach to examine liquids and isotropic solids. The text primarily focuses on one-dimensional uniaxial compression in order to show the key features of condensed matter’s response to shock wave loading. The first four chapters are specifically designed to quickly familiarize physical scientists and engineers with how shock waves interact with other shock waves or material boundaries, as well as to allow readers to better understand shock wave literature, use basic data analysis techniques, and design simple 1-D shock wave experiments. This is achieved by first presenting the steady one-dimensional strain conservation laws using shock wave impedance matching, which insures conservation of mass, momentum and energy. Here, the initial emphasis is on the meaning of shock wave and mass velocities in a laboratory coordinate system. An overview of basic experimental techniques for measuring pressure, shock velocity, mass velocity, compression and internal energy of steady 1-D shock waves is then presented. In the second part of the book, more advanced topics are progressively introduced: thermodynamic surfaces are used to describe equilibrium flow behavior, first-order Maxwell solid models are used to describe time-dependent flow behavior, descriptions of detonation shock waves in ideal and non-ideal explosives are provided, and lastly, a select group of current issues in shock wave physics are discussed in the final chapter.

Book Shock Sensitivity of LX 04 at Elevated Temperatures

Download or read book Shock Sensitivity of LX 04 at Elevated Temperatures written by and published by . This book was released on 1997 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hazard scenarios can involve multiple stimuli, such as heating followed by fragment impact (shock). The shock response of LX-04 (85 weight % HMX and 15 weight % Viton binder) preheated to temperatures hear 170C is studied in a 10.2 cm bore diameter gas gun using embedded manganin pressure gauges. The pressure histories at various depths in the LX-04 targets and the run distances to detonation at several input shock pressures are measured and compared to those obtained in ambient temperature LX-04. The hot LX-04 is significantly more shock sensitive than ambient LX-04. Ignition and Growth reactive flow models are developed for ambient and hot LX-04 to allow predictions of impact scenarios that a can not be tested directly.

Book Shock Compression of Condensed Matter  1999

Download or read book Shock Compression of Condensed Matter 1999 written by Michael D. Furnish and published by . This book was released on 2000 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Bio Based Polymers for Engineered Green Materials

Download or read book Bio Based Polymers for Engineered Green Materials written by Gianluca Tondi and published by MDPI. This book was released on 2020-05-20 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: With daily signals, Nature is communicating us that its unconscious wicked exploitation is no more sustainable. Our socio-economic system focuses on production increasing without considering the consequences. We are intoxicating ourselves on a daily bases just to allow the system to perpetuate itself. The time to switch into more natural solutions is come and the scientific community is ready to offer more natural product with comparable performance then the market products we are used to deal with. This book collects a broad set of scientific examples in which research groups from all over the world, aim to replace fossil fuel-based solutions with biomass derived materials. In here, some of the most innovative developments in the field of bio-materials are reported considering topics which goes from biomass valorization to the synthesis of high preforming bio-based materials.

Book Shock Compression of Condensed Matter  2007

Download or read book Shock Compression of Condensed Matter 2007 written by Mark Elert and published by . This book was released on 2007 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Shock Compression of Condensed Matter   2005

Download or read book Shock Compression of Condensed Matter 2005 written by Michael D. Furnish and published by American Institute of Physics. This book was released on 2006-08-24 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter, Baltimore, Maryland USA, 2005. The volume embodies the most recent research on shock compression of condensed matter and includes 363 plenary, invited, and contributed papers, all peer-reviewed. Topics include: equations of state, phase transitions, chemical reactions, warm dense matter, fracture, geophysics and planetary science, energetic materials, optical studies, and more.

Book SHOCK INITIATION EXPERIMENTS PLUS IGNITION AND GROWTH MODELING OF DAMAGED LX 04 CHARGES

Download or read book SHOCK INITIATION EXPERIMENTS PLUS IGNITION AND GROWTH MODELING OF DAMAGED LX 04 CHARGES written by and published by . This book was released on 2009 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shock initiation experiments were performed on mechanically and thermally damaged LX-04 (85% HMX and 15% Viton by weight) to obtain in-situ manganin pressure gauge data and run distances to detonation at various shock pressures. The LX-04 charges were damaged mechanically by applying a compressive load of 600 psi for 20,000 cycles, thus creating many small narrow cracks, or by cutting wedge shaped parts that were then loosely reassembled, thus creating a few large cracks. The thermal damaged LX-04 charges were heated to 190 C for a long enough time for the beta to delta phase transition to occur and then cooled to ambient temperature. Mechanically damaged LX-04 exhibited only slightly increased shock sensitivity, while the thermally damaged LX-04 was much more shock sensitive. The pristine LX-04 Ignition and Growth model, modified only by igniting a larger amount of explosive during shock compression based on the damaged charge density, accurately calculated the increased shock sensitivity of the three damaged charges.

Book LDRD Final Report

    Book Details:
  • Author :
  • Publisher :
  • Release : 2000
  • ISBN :
  • Pages : 32 pages

Download or read book LDRD Final Report written by and published by . This book was released on 2000 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: The HMX [beta]-[delta] solid-solid phase transition, which occurs as HMX is heated near 170 C, is linked to increased reactivity and sensitivity to initiation. Thermally damaged energetic materials (EMs) containing HMX therefore may present a safety concern. Information about the phase transition is vital to predictive safety models for HMX and HMX-containing EMs. We report work on monitoring the phase transition with real-time Raman spectroscopy aimed towards obtaining a better understanding of physical properties of HMX through the phase transition. HMX samples were confined in a cell of minimal free volume in a displacement-controlled or load-controlled arrangement. The cell was heated and then cooled at controlled rates while real-time Raman spectroscopic measurements were performed. Raman spectroscopy provides a clear distinction between the phases of HMX because the vibrational transitions of the molecule change with conformational changes associated with the phase transition. Temperature of phase transition versus load data are presented for both the heating and cooling cycles in the load-controlled apparatus, and general trends are discussed. A weak dependence of the temperature of phase transition on load was discovered during the heating cycle, with higher loads causing the phase transition to occur at a higher temperature. This was especially true in the temperature of completion of phase transition data as opposed to the temperature of onset of phase transition data. A stronger dependence on load was observed in the cooling cycle, with higher loads causing the reverse phase transitions to occur at a higher cooling temperature. Also, higher loads tended to cause the phase transition to occur over a longer period of time in the heating cycle and over a shorter period of time in the cooling cycle. All three of the pure HMX phases ([alpha], [beta] and [delta]) were detected on cooling of the heated samples, either in pure form or as a mixture.

Book Energy Research Abstracts

Download or read book Energy Research Abstracts written by and published by . This book was released on 1985 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Energetic Materials

    Book Details:
  • Author : Ulrich Teipel
  • Publisher : John Wiley & Sons
  • Release : 2006-03-06
  • ISBN : 3527604936
  • Pages : 643 pages

Download or read book Energetic Materials written by Ulrich Teipel and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incorporation of particular components with specialized properties allows one to tailor the end product's properties. For instance, the sensitivity, burning behavior, thermal or mechanical properties or stability of energetic materials can be affected and even controllably varied through incorporation of such ingredients. This book examines particle technologies as applied to energetic materials such as propellants and explosives, thus filling a void in the literature on this subject. Following an introduction covering general features of energetic materials, the first section of this book describes methods of manufacturing particulate energetic materials, including size reduction, crystallization, atomization, particle formation using supercritical fluids and microencapsulation, agglomeration phenomena, special considerations in mixing explosive particles and the production of nanoparticles. The second section discusses the characterization of particulate materials. Techniques and methods such as particle size analysis, morphology elucidation and the determination of chemical and thermal properties are presented. The wettability of powders and rheological behavior of suspensions and solids are also considered. Furthermore, methods of determining the performance of particular energetic materials are described. Each chapter deals with fundamentals and application possibilities of the various methods presented, with particular emphasis on issues applicable to particulate energetic materials. The book is thus equally relevant for chemists, physicists, material scientists, chemical and mechanical engineers and anyone interested or engaged in particle processing and characterization technologies.

Book Studies on the Polymorphs of HMX

Download or read book Studies on the Polymorphs of HMX written by Howard H. Cady and published by . This book was released on 1962 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Government Reports Announcements   Index

Download or read book Government Reports Announcements Index written by and published by . This book was released on 1996 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: