Download or read book History of Shock Waves Explosions and Impact written by Peter O. K. Krehl and published by Springer Science & Business Media. This book was released on 2008-09-24 with total page 1298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique and encyclopedic reference work describes the evolution of the physics of modern shock wave and detonation from the earlier and classical percussion. The history of this complex process is first reviewed in a general survey. Subsequently, the subject is treated in more detail and the book is richly illustrated in the form of a picture gallery. This book is ideal for everyone professionally interested in shock wave phenomena.
Download or read book Effects of Explosions on Materials written by Stepan S. Batsanov and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the 1950s explosives began to be used to generate ultrahigh pressures in condensed substances in order to modify their properties and structure. Notwithstanding the short duration of an explosion, its energy proved to be high enough to perform physical-chemical transformations of substances, and the new method gained wide industrial applications. It has both advan tages and drawbacks in comparison with the traditional method of static compression. The latter method, notorious for its cumbersome and expensive machin ery, allows one to maintain high pressure as long as one pleases and to regu late the temperature of the sample arbitrarily. But, the pressure available is rather limited and for any increase of this limit one has to pay by the progres sive shrinking of the working volume of a press. The dynamic method has the advantages of low cost and practically no restrictions of magnitude of pressure and the size of a processed sample, but the temperature in a compressed body is no longer controlled by an experi mentor. Rather, it is firmly dictated by the level of loading, according to the equation of state. Hence, it is difficult to recover metastable products and impossible to prepare solids with a low concentration of defects as the dura tion of explosion is too short for their elimination.
Download or read book Explosion Blast Response of Composites written by Adrian P. Mouritz and published by Woodhead Publishing. This book was released on 2017-05-22 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explosion Blast Response of Composites contains key information on the effects of explosions, shock waves, and detonation products (e.g. fragments, shrapnel) on the deformation and damage to composites. The book considers the blast response of laminates and sandwich composites, along with blast mitigation of composites (including coating systems and energy absorbing materials). Broken down under the following key themes: Introduction to explosive blast response of composites, Air explosion blast response of composites, Underwater explosion blast response of composites, and High strain rate and dynamic properties of composites, the book deals with an important and contemporary topic due to the extensive use of composites in applications where explosive blasts are an ever-present threat, such as military aircraft, armoured vehicles, naval ships and submarines, body armour, and other defense applications. In addition, the growing use of IEDs and other types of bombs used by terrorists to attack civilian and military targets highlights the need for this book. Many terrorist attacks occur in subways, trains, buses, aircraft, buildings, and other civil infrastructure made of composite materials. Designers, engineers and terrorist experts need the essential information to protect civilians, military personnel, and assets from explosive blasts. - Focuses on key aspects, including both modeling, analysis, and experimental work - Written by leading international experts from academia, defense agencies, and other organizations - Timely book due to the extensive use of composites in areas where explosive blasts are an ever-present threat in military applications
Download or read book Neurotrauma written by Raj K. Narayan and published by McGraw-Hill. This book was released on 1996 with total page 1558 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference is a comprehensive work in the field of neurotrauma and critical care. It incorporates the fields of head injury, spinal injury and basic neurotrauma research into one source. The major emphasis is on the treatment of patients with head and spinal cord injury, including the management of all other problems that bear upon the care of these patients.
Download or read book Brain Neurotrauma written by Firas H. Kobeissy and published by CRC Press. This book was released on 2015-02-25 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the contribution from more than one hundred CNS neurotrauma experts, this book provides a comprehensive and up-to-date account on the latest developments in the area of neurotrauma including biomarker studies, experimental models, diagnostic methods, and neurotherapeutic intervention strategies in brain injury research. It discusses neurotrauma mechanisms, biomarker discovery, and neurocognitive and neurobehavioral deficits. Also included are medical interventions and recent neurotherapeutics used in the area of brain injury that have been translated to the area of rehabilitation research. In addition, a section is devoted to models of milder CNS injury, including sports injuries.
Download or read book Structures Under Shock and Impact XV written by S. Syngellakis and published by WIT Press. This book was released on 2018-10-23 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discussing the increasing need to protect civilian infrastructure and industrial facilities against unintentional loads arising from accidental impact and explosion events as well as terrorist attack, this book contains papers presented at the 15th International Conference on Structures under Shock and Impact. This successful conference series has been regularly held since it began in 1989 in Cambridge, Massachusetts. While advances have been made over this period many challenges remain, such as to develop more effective and efficient blast and impact mitigation approaches than currently exist. The primary focus remains the survivability of physical facilities and the protection of people, as well as reducing economic losses and impact on the environment, with emphasis on innovative protective technologies to support the needs of an economically growing, modern society. The application of this technology ranges from the safe transportation of people in several modes and the transportation of dangerous or combustible materials to defences against natural hazard threats such as flood, wind, storm, tsunami and earthquake. Large scale testing is prohibitive and small scale laboratory testing results in scaling uncertainties. Continuing research is therefore essential to improve knowledge on how these structures behave under a variety of load actions, some of which interact making it even more complex and difficult to define. Consequently, more use of advanced numerical simulations for load and structural response calculations is common practice in industry and research. Such calculations can directly be used in design and risk assessment calculations, but also be applied as input to more simplified design tools and design codes. Whether numerical or analytical modelling techniques are employed, experimental validation is vital for there to be acceptance of the approach to be used. The published research aims for the exchange of ideas and results to promote a better understanding of the critical issues relating to the testing behaviour, modelling and analyses of protective structures against blast and impact loading.
Download or read book Explosion Shock Wave and High Strain Rate Phenomena of Advanced Materials written by Kazuyuki Hokamoto and published by Elsevier. This book was released on 2021-06-14 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials processing using explosion, shock-wave and high-strain-rate phenomena was developed after WWII, and these explosive forming and welding techniques have since been adopted as an accepted industrial technology. Such extremely high-rate phenomena historically used empirical experiences while the experimental conditions were not well documented due to the difficulties inherent in understanding the real response or behaviour of materials. Based upon the recent development of numerical techniques for analysis and the enriched data available on the behaviour of materials, it is now possible to predict such high-rate phenomena based upon numerical and experimental approaches including optical observation. Explosion, Shock-wave and High-strain-rate Phenomena of Advanced Materials demonstrates the deformation of various materials at high-rate based upon numerical analysis and supported by experimental evidence. The book is recommended for researchers and engineers who would like to learn more about the high-rate effect of materials and those who need to resolve multi-physics problems based on numerical approach. It is also ideal for researchers and engineers interested with explosive and other high-rate processing of materials. Presents numerical techniques on the analysis and enriched data on the behavior of materials based upon a numerical approach Provides case studies to illustrate the various methods discussed Includes mechanical response at high-rates of porous materials
Download or read book Explosion Hazards and Evaluation written by W.E. Baker and published by Elsevier. This book was released on 2012-12-02 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explosion Hazards and Evaluation presents the principles and applications of explosion hazards evaluation. The text is organized into nine chapters. Chapters 1 and 2 discuss the energy release processes which generate accidental explosions, and the resulting development of pressure and shock waves in a surrounding atmosphere. The manner in which the "free-field" waves are modified in interacting with structures or other objects in their paths is discussed in Chapter 3. Structural response to blast loading and non-penetrating impact is covered in two chapters, with Chapter 4 including simplified analysis methods and Chapter 5 including numerical methods. Chapter 6 includes a rather comprehensive treatment of generation of fragments and missiles in explosions, and the flight and effects of impact of these objects. Chapter 7 considers thermal radiation of large chemical explosions. Explosions may or may not cause damage or casualty, and various damage criteria have been developed for structures, vehicles, and people. These criteria are presented in Chapter 8. General procedures for both the postmortem evaluation of accidental explosions and for design for blast and impact resistance are reviewed in Chapter 9. Engineers, scientists, and plant safety personnel will find the book very useful.
Download or read book Explosive Effects and Applications written by Jonas A. Zukas and published by Springer Science & Business Media. This book was released on 2013-12-01 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a broad-based text on the fundamentals of explosive behavior and the application of explosives in civil engineering, industrial processes, aerospace applications, and military uses.
Download or read book The Dynamics of Explosion and Its Use written by Josef Henrych and published by Elsevier Science & Technology. This book was released on 1979 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental Methods of Shock Wave Research written by Ozer Igra and published by Springer. This book was released on 2015-10-31 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive and carefully edited volume presents a variety of experimental methods used in Shock Waves research. In 14 self contained chapters this 9th volume of the “Shock Wave Science and Technology Reference Library” presents the experimental methods used in Shock Tubes, Shock Tunnels and Expansion Tubes facilities. Also described is their set-up and operation. The uses of an arc heated wind tunnel and a gun tunnel are also contained in this volume. Whenever possible, in addition to the technical description some typical scientific results obtained using such facilities are described. Additionally, this authoritative book includes techniques for measuring physical properties of blast waves and laser generated shock waves. Information about active shock wave laboratories at different locations around the world that are not described in the chapters herein is given in the Appendix, making this book useful for every researcher involved in shock/blast wave phenomena.
Download or read book ISC Security Design Criteria for New Federal Office Buildings and Major Modernization Projects written by National Research Council and published by National Academies Press. This book was released on 2003-05-16 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: In November 1999, GSA and the U.S. Department of State convened a symposium to discuss the apparently conflicting objectives of security from terrorist attack and the design of public buildings in an open society. The symposium sponsors rejected the notion of rigid, prescriptive design approaches. The symposium concluded with a challenge to the design and security professions to craft aesthetically appealing architectural solutions that achieve balanced, performance-based approaches to both openness and security. In response to a request from the Office of the Chief Architect of the Public Buildings Service, the National Research Council (NRC) assembled a panel of independent experts, the Committee to Review the Security Design Criteria of the Interagency Security Committee. This committee was tasked to evaluate the ISC Security Design Criteria to determine whether particular provisions might be too prescriptive to allow a design professional "reasonable flexibility" in achieving desired security and physical protection objectives.
Download or read book Granular Materials Under Shock and Blast Loading written by Padmanabha Vivek and published by Springer Nature. This book was released on 2019-10-31 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses the fundamental dynamic behaviour of granular materials, in particular cohesionless sand, when subjected to shock and blast wave loading. The contents of the book are mainly divided into three parts based on the type of loading imparted to the granular materials: Shock-wave loading (step pulse); Air-blast loading (Friedlander wave); Buried-blast loading. It provides a comprehensive review of the available testing methods, along with the necessary diagnostic measurements for material characterization, making it useful for researchers working in the area of blast protection and Impact engineering.
Download or read book Explosive Pulsed Power written by Larry L. Altgilbers and published by World Scientific. This book was released on 2011 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explosive pulsed power generators are devices that either convert the chemical energy stored in explosives into electrical energy or use the shock waves generated by explosives to release energy stored in ferroelectric and ferromagnetic materials. The objective of this book is to acquaint the reader with the principles of operation of explosive generators and to provide details on how to design, build, and test three types of generators: flux compression, ferroelectric, and ferromagnetic generators, which are the most developed and the most near term for practical applications. Containing a considerable amount of new experimental data that has been collected by the authors, this is the first book that treats all three types of explosive pulsed power generators. In addition, there is a brief introduction to a fourth type ix explosive generator called a moving magnet generator. As practical applications for these generators evolve, students, scientists, and engineers will have access to the results of a considerable body of experience gained by almost 10 years of intense research and development by the authors.
Download or read book Effects of Nuclear Earth Penetrator and Other Weapons written by National Research Council and published by National Academies Press. This book was released on 2005-10-06 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Underground facilities are used extensively by many nations to conceal and protect strategic military functions and weapons' stockpiles. Because of their depth and hardened status, however, many of these strategic hard and deeply buried targets could only be put at risk by conventional or nuclear earth penetrating weapons (EPW). Recently, an engineering feasibility study, the robust nuclear earth penetrator program, was started by DOE and DOD to determine if a more effective EPW could be designed using major components of existing nuclear weapons. This activity has created some controversy about, among other things, the level of collateral damage that would ensue if such a weapon were used. To help clarify this issue, the Congress, in P.L. 107-314, directed the Secretary of Defense to request from the NRC a study of the anticipated health and environmental effects of nuclear earth-penetrators and other weapons and the effect of both conventional and nuclear weapons against the storage of biological and chemical weapons. This report provides the results of those analyses. Based on detailed numerical calculations, the report presents a series of findings comparing the effectiveness and expected collateral damage of nuclear EPW and surface nuclear weapons under a variety of conditions.
Download or read book Biological Tolerance to Air Blast and Related Biomedical Criteria written by Clayton S. White and published by . This book was released on 1965 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experience with animals exposed in a variety of above and below ground structures during full-scale field operations at the Nevada Test Site in 1953, 1955 and 1957 were reviewed. The data were assembled and summarized to illustrate the nature of the blast-induced problems of significance in protective shelters, "open" as well as "closed". Potential hazards were related to the following: various patterns of variation in environmental pressure; translational events associated with transient, high-velocity winds, ground shock and gravity involving the impact of energized inanimate objects on the one hand the the consequences of whole-body displacement on the other; non-line-of-site thermal phenomena including hot objects and rapidly moving hot, dust- laden air and debris; and dust, in the respirable size range, sufficiently high in concentration even in "closed" shelters as to warrant design measures to minimize or eliminate the occurrence of small particulates whether arising from wall spalling or otherwise. Tentative biological criteria, conceived to help assess human hazards from blast-related phenomena, were presented. Relevant data from the literature and on- going research in environmental medicine were set forth to aid the reader in appreciating how the criteria were formulated, what information was extrapolated from animal data, and wherein "best estimates" were employed. "State-of-the-art" concepts were noted to emphasize areas in which more thinking and research must continue if more refined, complete and adequate criteria are to be forthcoming for assessing man's response to blast-induced variation in his immediate environment.
Download or read book Formulas for Mechanical and Structural Shock and Impact written by Gregory Szuladzinski and published by CRC Press. This book was released on 2009-10-15 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: In dealing with extreme loads on structures, simple approximations of key variables can indicate if there is a threat of collapse. The ability to determine such variables early on strongly impacts the decisions about the engineering approach to adopt. Formulas for Mechanical and Structural Shock and Impact is a self-contained and concise presentati
