Download or read book Ship Construction and Welding written by Nisith R. Mandal and published by Springer. This book was released on 2016-11-09 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses various aspects of ship construction, from ship types and construction materials, to welding technologies and accuracy control. The contents of the book are logically organized and divided into twenty-one chapters. The book covers structural arrangement with longitudinal and transverse framing systems based on the service load, and explains basic structural elements like hatch side girders, hatch end beams, stringers, etc. along with structural subassemblies like floors, bulkheads, inner bottom, decks and shells. It presents in detail double bottom construction, wing tanks & duct keels, fore & aft end structures, etc., together with necessary illustrations. The midship sections of various ship types are introduced, together with structural continuity and alignment in ship structures. With regard to construction materials, the book discusses steel, aluminum alloys and fiber reinforced composites. Various methods of steel material preparation are discussed, and plate cutting and forming of plates and sections are explained. The concept of line heating for plate bending is introduced.Welding power source characteristics, metal transfer mechanisms, welding parameters and their effects on the fusion zone, weld deposit, and weld bead profile are discussed in detail. Various fusion welding methods, MMAW, GMAW, SAW, Electroslag welding and Electrogas welding and single side welding are explained in detail. Friction stir welding as one of the key methods of solid state welding as applied to aluminum alloys is also addressed. The mechanisms of residual stress formation and distortion are explained in connection with stiffened panel fabrication, with an emphasis on weld induced buckling of thin panels. Further, the basic principles of distortion prevention, in-process distortion control and mitigation techniques like heat sinking, thermo-mechanical tensioning etc. are dealt with in detail. In its final section, the book describes in detail various types of weld defects that are likely to occur, together with their causes and remedial measures. The nondestructive testing methods that are most relevant to ship construction are explained. Lastly, a chapter on accuracy control based on statistical principles is included, addressing the need for a suitable mechanism to gauge the ranges of variations so that one can quantitatively target the end product accuracy.
Download or read book Ship Construction written by David J. Eyres and published by Heinemann Educational Books. This book was released on 1972 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ship Construction is a comprehensive text for students of naval architecture, ship building and construction, and for professional Naval Architects and Marine Engineers. Covers the complete ship construction process including the development of ship types, materials and strengths of ships, welding and cutting, shipyard practice, ship structure and outfitting, All the latest developments in technology and shipyard methods, including a new chapter on computer-aided design and manufacture, Essential for students and professionals, particularly those working in shipyards, supervising ship construction, conversion and maintenance. Book jacket.
Download or read book Ship Construction Sketches and Notes written by John F Kemp and published by Routledge. This book was released on 2013-10-11 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic book in the Kemp and Young series has been fully revised and updated by David J Eyres, author of the well-known Butterworth-Heinemann title "Ship Construction," and will prove indispensable to the student reader. The contents cover, in numerous fully illustrated items, shipyard practices, principles of construction methods, the design and construction of the various component parts of the ship, and the overall arrangement of different types of merchant and passenger vessels.
Download or read book Ship Construction written by David J. Eyres and published by Butterworth-Heinemann. This book was released on 2001 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ship Construction is a comprehensive text for students following BTEC courses in nautical science, naval architecture and shipbuilding, and courses leading to BSc (Nautical Science) or Extra Masters Certificate. The author presents seven sections that begin with an introduction to ship building and conclude with the finished product. There is a concise description of all the relevant international regulations. The seven sections cover the development of ship types, materials and strengths of ships, welding and cutting, shipyard practice, ship structure and outfitting. Each section is broken down into several chapters that explore the topics in depth. The fifth edition expands further on the development of ship types over the last few years - discussion focussing on the latest views on bulk carrier safety. Welding and shipyard practices have been reviewed and revised in line with current practice. In addition, the book covers all the latest IMO and SOLAS information. Follows, chapter by chapter, the construction of a ship from start to finish. IMO and SOLAS: latest information covered. Essential for both nautical students and professional students of naval architecture.
Download or read book Ship Construction Sketches and Notes written by John F Kemp and published by Routledge. This book was released on 2013-10-11 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic book in the Kemp and Young series has been fully revised and updated by David J Eyres, author of the well-known Butterworth-Heinemann title "Ship Construction," and will prove indispensable to the student reader. The contents cover, in numerous fully illustrated items, shipyard practices, principles of construction methods, the design and construction of the various component parts of the ship, and the overall arrangement of different types of merchant and passenger vessels.
Download or read book Report to the United States Shipping Board Emergency Fleet Corporation on Electric Welding and Its Application in United States of America to Ship Construction written by James Caldwell and published by . This book was released on 1918 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Riveting and Arc Welding in Ship Construction written by Henry Eastin 1889- Rossell and published by Hassell Street Press. This book was released on 2021-09-10 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important and is part of the knowledge base of civilization as we know it. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. To ensure a quality reading experience, this work has been proofread and republished using a format that seamlessly blends the original graphical elements with text in an easy-to-read typeface. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Riveting and Arc Welding in Ship Construction written by Henry Eastin Rossell and published by . This book was released on 1934 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Steel Shipbuilding written by Elijah Baker and published by McGraw-Hill Companies. This book was released on 1953 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Warship Builders written by Thomas Heinrich and published by Naval Institute Press. This book was released on 2020-11-15 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Warship Builders is the first scholarly study of the U.S. naval shipbuilding industry from the early 1920s to the end of World War II, when American shipyards produced the world's largest fleet that helped defeat the Axis powers in all corners of the globe. A colossal endeavor that absorbed billions and employed virtual armies of skilled workers, naval construction mobilized the nation's leading industrial enterprises in the shipbuilding, engineering, and steel industries to deliver warships whose technical complexity dwarfed that of any other weapons platform. Based on systematic comparisons with British, Japanese, and German naval construction, Thomas Heinrich pinpoints the distinct features of American shipbuilding methods, technology development, and management practices that enabled U.S. yards to vastly outproduce their foreign counterparts. Throughout the book, comparative analyses reveal differences and similarities in American, British, Japanese, and German naval construction. Heinrich shows that U.S. and German shipyards introduced electric arc welding and prefabrication methods to a far greater extent than their British and Japanese counterparts between the wars, laying the groundwork for their impressive production records in World War II. While the American and Japanese navies relied heavily on government-owned navy yards, the British and German navies had most of their combatants built in corporately-owned yards, contradicting the widespread notion that only U.S. industrial mobilization depended on private enterprise. Lastly, the U.S. government's investments into shipbuilding facilities in both private and government-owned shipyards dwarfed the sums British, Japanese, and German counterparts expended. This enabled American builders to deliver a vast fleet that played a pivotal role in global naval combat.
Download or read book Shipbuilding Technology and Education written by Division on Engineering and Physical Sciences and published by National Academies Press. This book was released on 1996-05-22 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. shipbuilding industry now confronts grave challenges in providing essential support of national objectives. With recent emphasis on renewal of the U.S. naval fleet, followed by the defense builddown, U.S. shipbuilders have fallen far behind in commercial ship construction, and face powerful new competition from abroad. This book examines ways to reestablish the U.S. industry, to provide a technology base and R&D infrastructure sustaining both commercial and military goals. Comparing U.S. and foreign shipbuilders in four technological areas, the authors find that U.S. builders lag most severely in business process technologies, and in technologies of new products and materials. New advances in system technologies, such as simulation, are also needed, as are continuing developments in shipyard production technologies. The report identifies roles that various government agencies, academia, and, especially, industry itself must play for the U.S. shipbuilding industry to attempt a turnaround.
Download or read book Report to the United States Shipping Board Emergency Fleet Corporation on Electric Welding and Its Application in United States of America to Ship Construction Classic Reprint written by James Caldwell and published by Forgotten Books. This book was released on 2017-12-21 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Report to the United States Shipping Board Emergency Fleet Corporation on Electric Welding and Its Application in United States of America to Ship Construction Report Number Nine: New York Shipbuilding Company's Investigations Relating to Spot Welding. (pages 127 (a) Description and remarks (b) Photographs and tabulated test results. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Ships Fastenings written by Michael Mccarthy and published by Texas A&M University Press. This book was released on 2005 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this first detailed study of hull fastenings, Michael McCarthy describes those found on ships throughout the ages, from sewn-plank boats of the ancient world and Micronesia to Viking ships, Mediterranean caravels, nineteenth-century ocean clippers, and steamships. McCarthy also provides a history of many discoveries and innovations that accompanied changes in the kinds of fastenings used and the way they were secured--such as copper sheathing, metallurgy, and welding. Underwriting and insurance are also discussed, since the registries kept by Lloyd's and others dictated the form and method of fastening. This book will interest not only archaeologists and historians, but also boat builders and enthusiasts.
Download or read book Ship Production written by Richard Lee Storch and published by Cornell Maritime Press/Tidewater Publishers. This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised and updated (1st ed., 1988) to reflect current information and practice in the shipbuilding industry, this text/reference describes the principles and practice of ship production employing group technology. The system described is a mix of old and new techniques, aimed at optimizing producti
Download or read book Ship Construction written by George J. Bruce and published by Butterworth-Heinemann. This book was released on 2012-05-22 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ship Construction, Seventh Edition, offers guidance for ship design and shipbuilding from start to finish. It provides an overview of current shipyard techniques, safety in shipyard practice, materials and strengths, welding and cutting, and ship structure, along with computer-aided design and manufacture, international regulations for ship types, new materials, and fabrication technologies. Comprised of seven sections divided into 32 chapters, the book introduces the reader to shipbuilding, including the basic design of a ship, ship dimensions and category, and development of ship types. It then turns to a discussion of rules and regulations governing ship strength and structural integrity, testing of materials used in ship construction, and welding practices and weld testing. Developments in the layout of a shipyard are also considered, along with development of the initial structural and arrangement design into information usable by production; the processes involved in the preparation and machining of a plate or section; and how a ship structure is assembled. A number of websites containing further information, drawings, and photographs, as well as regulations that apply to ships and their construction, are listed at the end of most chapters. This text is an invaluable resource for students of marine sciences and technology, practicing marine engineers and naval architects, and professionals from other disciplines ranging from law to insurance, accounting, and logistics. Covers the complete ship construction process including the development of ship types, materials and strengths, welding and cutting and ship structure, with numerous clear line diagrams included for ease of understanding Includes the latest developments in technology and shipyard methods, including a new chapter on computer-aided design and manufacture Essential for students and professionals, particularly those working in shipyards, supervising ship construction, conversion and maintenance
Download or read book Welding for Ship Construction in British Yards written by W. Elder and published by . This book was released on 1944 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shipyard Welding Workmanship written by and published by . This book was released on 1945 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
