Download or read book Shear Behavior and Design of High Strength Concrete Prestressed Bridge Girders written by Emad Leon Labib and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A simple semi-empirical set of equations was developed at the University of Houston (UH) to predict the shear strength of PC I-girders with normal-strength concrete. The UH-developed equation is a function of concrete strength, web area, shear span to effective depth ratio, and percentage of transverse steel. This research intends to validate or modify the UH-developed equation for (1) high-strength concrete and (2) different sizes of PC girders and studying the possibility of premature failure due to local failure in end zone. Ten modified Tx28 PC girders, derived by scaling down an existing TxDOT cross section, were tested in this study for the first objective. The girders were divided into three groups (Groups A, C and F) based on the concrete strength. Each group of the PC girders was tested with different shear span to effective depth ratio. The validity of the proposed UH-developed equations was ascertained using the experimental results. It was found able to predict accurately the ultimate shear strength of PC girders with concrete strength up to 117 MPa (17,000 psi) with enough ductility. Six PC girders of Tx-series with three different sizes were tested for the second objective. The girders were divided into three groups (Groups D, E and G) based on the girder depth. The experimental results ensured the validity of the UH-developed equations for PC girders with different sizes. Also, the experimental data showed that the PC girders of the new Tx-series can reach the maximum shear capacity without a shear-bond failure. The results of testing the 10 modified Tx-28 girders were used to validate a finite element program developed at UH, Simulation of Concrete Structures (SCS), for PC girders with different concrete strength. Analytical results presented in this dissertation proved the validity of SCS to predict the behavior of PC girders with different concrete strength up to 117 MPa (17,000 psi).

Download or read book Shear Reinforcement Requirements for High Strength Concrete Bridge Girders written by J.A. Ramirez and published by . This book was released on 2005-07-15 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Shear Behavior of High Strength Self consolidating Concrete in Nebraska University Bridge Girders written by Alexander Michael Griffin and published by . This book was released on 2014 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: "As the nation's infrastructure continues to age, advanced concrete technologies have been developed to both reduce a structure's costs and increase its life expectancy. Since the early 1990's, self-consolidating concrete (SCC) has been one of these technologies. Many, however, have been reluctant to implement SCC in highway girders due to the mixture constituents. One of these concerns is the reduced content and size of the coarse aggregate. These differences in the concrete potentially hinder SCC's mechanical properties and shear resistance. Additionally, for high strength concretes (HSC) with weaker aggregates, shear cracks tend to propagate through the coarse aggregate, reducing the aggregate interlock component of the shear resistance. This study aimed at assessing the web-shear strength both with and without web reinforcement of two precast-prestressed Nebraska University (NU) 53 girders fabricated with high strength self-consolidating concrete (HS-SCC). The results were compared to the ACI 318 (2011) and AASHTO LRFD (2012) code estimates, and a finite element model (FEM) package, Response 2000. ATENA Engineering, a finite element analysis (FEA) program, was also used to evaluate the qualitative results, specifically crack patterns and the effect of the coarse aggregate content and size. A prestressed concrete database was also constructed to assess the effect of the reduced coarse aggregate content on the shear capacity of HS-SCC in prestressed concrete members. The mechanical properties of the HS-SCC mix were also tested and compared to relevant empirical equations. The HS-SCC mix investigated in this study proves to be a viable cost-saving alternative for bridge superstructure elements"--Abstract, page iii.

Download or read book Shear Behavior of Prestressed Concrete Bridge Girders written by David Paul Gustafson and published by . This book was released on 1967 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ultimate Shear Behavior of Prestressed Concrete Bridge Girders written by John Cunningham Stone and published by . This book was released on 1965 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Shear Behavior of Prestressed Concrete Girder with High strength Materials written by 張穩二 and published by . This book was released on 2024 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Application of LRFD Bridge Design Specifications to High strength Structural Concrete written by Neil Middleton Hawkins and published by Transportation Research Board. This book was released on 2007 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Research sponsored by the American Association of State Highway and Transportation Officials in cooperation with the Federal Highway Administration."

Download or read book Ultra High Performance Concrete UHPC written by Ekkehard Fehling and published by John Wiley & Sons. This book was released on 2015-04-20 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected chapters from the German concrete yearbook are now being published in the new English "Beton-Kalender Series" for the benefit of an international audience. Since it was founded in 1906, the Ernst & Sohn "Beton-Kalender" has been supporting developments in reinforced and prestressed concrete. The aim was to publish a yearbook to reflect progress in "ferro-concrete" structures until - as the book's first editor, Fritz von Emperger (1862-1942), expressed it - the "tempestuous development" in this form of construction came to an end. However, the "Beton-Kalender" quickly became the chosen work of reference for civil and structural engineers, and apart from the years 1945-1950 has been published annually ever since. Ultra high performance concrete (UHPC) is a milestone in concrete technology and application. It permits the construction of both more slender and more durable concrete structures with a prolonged service life and thus improved sustainability. This book is a comprehensive overview of UHPC - from the principles behind its production and its mechanical properties to design and detailing aspects. The focus is on the material behaviour of steel fibre-reinforced UHPC. Numerical modelling and detailing of the connections with reinforced concrete elements are featured as well. Numerous examples worldwide - bridges, columns, facades and roofs - are the basis for additional explanations about the benefits of UHPC and how it helps to realise several architectural requirements. The authors are extensively involved in the testing, design, construction and monitoring of UHPC structures. What they provide here is therefore a unique synopsis of the state of the art with a view to practical applications.

Download or read book High strength Concrete Prestressed Bridge Girders written by Theresa M. Ahlborn and published by . This book was released on 2000 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Investigation of Shear Behavior of Prestressed Concrete Bridge Girders written by and published by . This book was released on 1966 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cracking and Shear Capacity of High Strength Concrete Bridge Girders written by Kamal S. Tawfiq and published by . This book was released on 1995 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Shear Behavior and Capacity of Large Scale Prestressed High Strength Concrete Bulb tee Girders written by Shaoyun Sun and published by ProQuest. This book was released on 2007 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the measured test results, an analytical model, Crack Displacement Field Theory (CDFT), was developed for predicting the shear response of prestressed/reinforced concrete members. Compared to other existing models, it could capture the discrete displacement due to crack opening and crack slip along crack surface and can take account the variation of stresses in reinforcement due to bond. Good agreements were achieved between the model predictions and test results.

Download or read book Prestress Losses in Pretensioned High strength Concrete Bridge Girders written by Maher K. Tadros and published by Transportation Research Board. This book was released on 2003 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The HCM includes three printed volumes (Volumes 1-3) that can be purchased from the Transportation Research Board in print and electronic formats. Volume 4 is a free online resource that supports the rest of the manual. It includes: Supplemental chapters 25-38, providing additional details of the methodologies described in the Volume 1-3 chapters, example problems, and other resources; A technical reference library providing access to a significant portion of the research supporting HCM methods; Two applications guides demonstrating how the HCM can be applied to planning-level analysis and a variety of traffic operations applications; Interpretations, updates, and errata for the HCM (as they are developed);A discussion forum allowing HCM users to ask questions and collaborate on HCM-related matters; and Notifications of chapter updates, active discussions, and more via an optional e-mail notification feature."--Publisher.

Download or read book High Strength Prestressed Concrete Bridge Girders written by Theresa Marie Ahlborn and published by . This book was released on 1998 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Behavior and Design of Trapezoidally Corrugated Web Girders for Bridge Construction written by Mostafa Fahmi Hassanein and published by Woodhead Publishing. This book was released on 2022-05-07 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrugated web girders (CWGs), used for bridge construction, differ in important ways from conventional prismatic girders. Behavior and Design of Trapezoidally Corrugated Web Girders for Bridge Construction details the behavior and design of CWGs in bridge construction and includes unique research into high-strength steel. The title gives a comprehensive review of the last decade in CWG design. In-depth explanations of key concepts are given — such as the accordion effect — that differentiate these girders from more conventional flat-webbed girders, and the authors also present specialized research into tubular flanged girders. The book distinguishes between prismatic and tapered CWGs, explains failure modes under both shear and flexure, and gives clear figures to illustrate these modes. The volume compares international building codes and offers recommendations for future research. Seven chapters cover –– An introduction to CWGs for bridge construction; Development of bridges with corrugated webs; Real boundary conditions between flange and web; Shear buckling behavior; Flexural buckling behavior; Recent erection methods and; Future research. Enables the reader to understand advances and future directions in the behavior and design of CWGs for bridge building Reviews advances in the behavior and design of CWGs Explains concepts which make these girders different from conventional flat-webbed girders Distinguishes between the behavior of prismatic and tapered CWGs Considers the failure modes of girders under shear and flexure, as well as ultimate strength Compares international codes — such as Eurocode 3 — in useful technical detail

Download or read book Shear and Flexural Capacity of High Strength Prestressed Concrete Bridge Girders written by Arek Tilmann Higgs and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design and Environmental Performance of Near surface Mounted Carbon Fiber Reinforced Polymer Strips for Shear Strengthening Reinforced Concrete Bridge Girders written by Jacob Hans Goebel and published by . This book was released on 2011 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the interstate expansion of the 1950s, many conventionally reinforced concrete deck girder bridges were built throughout the country. These now vintage bridges commonly exhibit diagonal cracking and rate inadequately for shear, thus they are candidates for shear strengthening to extend their useful life. Near-surface mounted (NSM) retrofitting is a promising new strengthening technique, but limited test data are available for carbon fiber reinforced polymer (CFRP) in shear strengthening making the long-term durability of NSM-CFRP unknown. This paper provides experimental results from realistic full-scale specimens strengthened with NSM-CFRP. Specimens were tested for shear strength and subjected to environmental exposures to assess long-term durability. Small cylinder specimens were tested to investigate relative performance of different adhesives on bond strength under different environmental exposures. Test results provide a better understanding of the NSM-CFRP shear behavior and strength. Recommendations for shear strength design with NSM-CFRP are made.