Download or read book Mechanical Properties and Testing of Polymers written by G.M. Swallowe and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents a continuation of the Polymer Science and Technology series edited by Dr. D. M. Brewis and Professor D. Briggs. The theme of the series is the production of a number of stand alone volumes on various areas of polymer science and technology. Each volume contains short articles by a variety of expert contributors outlining a particular topic and these articles are extensively cross referenced. References to related topics included in the volume are indicated by bold text in the articles, the bold text being the title of the relevant article. At the end of each article there is a list of bibliographic references where interested readers can obtain further detailed information on the subject of the article. This volume was produced at the invitation of Derek Brewis who asked me to edit a text which concentrated on the mechanical properties of polymers. There are already many excellent books on the mechanical properties of polymers, and a somewhat lesser number of volumes dealing with methods of carrying out mechanical tests on polymers. Some of these books are listed in Appendix 1. In this volume I have attempted to cover basic mechanical properties and test methods as well as the theory of polymer mechanical deformation and hope that the reader will find the approach useful.
Download or read book Torsion Shear Apparatus and Testing Procedures written by Mikael Juul Hvorslev and published by . This book was released on 1952 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composite Materials written by Steven J. Hooper and published by ASTM International. This book was released on 1997 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comparison of Truly Undrained and Constant Volume Direct Simple Shear Tests written by and published by . This book was released on 1988 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Test Methods and Design Allowables for Fibrous Composites written by Christos C. Chamis and published by ASTM International. This book was released on 1989 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Proceedings of a symposium on [title] held in Phoenix, AZ, Nov. 1986. Data and test methods on: extreme/hostile environments, design allowables, property/behavior specific testing. Annotation copyrighted by Book News, Inc., Portland, OR.
Download or read book Atlas of Stress strain Curves written by ASM International and published by ASM International. This book was released on 2002-01-01 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains more than 1400 curves, almost three times as many as in the 1987 edition. The curves are normalized in appearance to aid making comparisons among materials. All diagrams include metric units, and many also include U.S. customary units
Download or read book Advances in Friction Stir Welding and Processing written by M.-K. Besharati-Givi and published by Elsevier. This book was released on 2014-12-08 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction-stir welding (FSW) is a solid-state joining process primarily used on aluminum, and is also widely used for joining dissimilar metals such as aluminum, magnesium, copper and ferrous alloys. Recently, a friction-stir processing (FSP) technique based on FSW has been used for microstructural modifications, the homogenized and refined microstructure along with the reduced porosity resulting in improved mechanical properties. Advances in friction-stir welding and processing deals with the processes involved in different metals and polymers, including their microstructural and mechanical properties, wear and corrosion behavior, heat flow, and simulation. The book is structured into ten chapters, covering applications of the technology; tool and welding design; material and heat flow; microstructural evolution; mechanical properties; corrosion behavior and wear properties. Later chapters cover mechanical alloying and FSP as a welding and casting repair technique; optimization and simulation of artificial neural networks; and FSW and FSP of polymers. - Provides studies of the microstructural, mechanical, corrosion and wear properties of friction-stir welded and processed materials - Considers heat generation, heat flow and material flow - Covers simulation of FSW/FSP and use of artificial neural network in FSW/FSP
Download or read book Interface Science and Composites written by Soo-Jin Park and published by Academic Press. This book was released on 2011-07-18 with total page 853 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of Interface Science and Composites is to facilitate the manufacture of technological materials with optimized properties on the basis of a comprehensive understanding of the molecular structure of interfaces and their resulting influence on composite materials processes. From the early development of composites of various natures, the optimization of the interface has been of major importance. While there are many reference books available on composites, few deal specifically with the science and mechanics of the interface of materials and composites. Further, many recent advances in composite interfaces are scattered across the literature and are here assembled in a readily accessible form, bringing together recent developments in the field, both from the materials science and mechanics perspective, in a single convenient volume. The central theme of the book is tailoring the interface science of composites to optimize the basic physical principles rather than on the use of materials and the mechanical performance and structural integrity of composites with enhanced strength/stiffness and fracture toughness (or specific fracture resistance). It also deals mainly with interfaces in advanced composites made from high-performance fibers, such as glass, carbon, aramid, and some inorganic fibers, and matrix materials encompassing polymers, carbon, metals/alloys, and ceramics. Includes chapter on the development of a nanolevel dispersion of graphene particles in a polymer matrix Focus on tailoring the interface science of composites to optimize the basic physical principles Covers mainly interfaces in advanced composites made from high performance fibers
Download or read book Proceedings of the First International Conference on Theoretical Applied and Experimental Mechanics written by Emmanuel E. Gdoutos and published by Springer. This book was released on 2018-05-26 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: ICTAEM_1 treated all aspects of theoretical, applied and experimental mechanics including biomechanics, composite materials, computational mechanics, constitutive modeling of materials, dynamics, elasticity, experimental mechanics, fracture, mechanical properties of materials, micromechanics, nanomechanics, plasticity, stress analysis, structures, wave propagation. During the conference special symposia covering major areas of research activity organized by members of the Scientific Advisory Board took place. ICTAEM_1 brought together the most outstanding world leaders and gave attendees the opportunity to get acquainted with the latest developments in the area of mechanics. ICTAEM_1 is a forum of university, industry and government interaction and serves in the exchange of ideas in an area of utmost scientific and technological importance.
Download or read book Torsion and Shear Stresses in Ships written by Mohamed Shama and published by Springer Science & Business Media. This book was released on 2010-09-27 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last few decades, much research work was conducted to improve ship structure analysis and design. Most of the efforts were directed to improve the strength of hull girder and to use the method of finite element analysis more efficiently and effectively. Because of the high degree of complexity of ship structures the interaction between hull girder strength and local strength require special attention. The complex system of stresses could produce unacceptable deformations and high values of equivalent stresses. This book covers an area of ship structure analysis and design that has not been exhaustively covered by other books on ship structures in a simple form. It presents the basic concepts of the methods and procedures required to calculate torsion and shear stresses in ship structures. Moreover, it is enhanced with a set of some solved and unsolved problems, very useful for students of naval and marine engineering.
Download or read book Proceedings of the Third International Conference on Theoretical Applied and Experimental Mechanics written by Emmanuel Gdoutos and published by Springer Nature. This book was released on 2020-05-18 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 3rd edition of the International Conference on Theoretical, Applied and Experimental Mechanics. The papers focus on all aspects of theoretical, applied and experimental mechanics, including biomechanics, composite materials, computational mechanics, constitutive modeling of materials, dynamics, elasticity, experimental mechanics, fracture mechanics, mechanical properties of materials, micromechanics, nanomechanics, plasticity, stress analysis, structures, wave propagation.
Download or read book Testing of the Plastic Deformation of Metals written by T. W. Clyne and published by Cambridge University Press. This book was released on 2021-06-10 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover a novel approach to the subject, providing detailed information about established and innovative mechanical testing procedures.
Download or read book Mechanical Properties and Testing of Polymers written by G.M. Swallowe and published by Springer Science & Business Media. This book was released on 1999-11-30 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents a continuation of the Polymer Science and Technology series edited by Dr. D. M. Brewis and Professor D. Briggs. The theme of the series is the production of a number of stand alone volumes on various areas of polymer science and technology. Each volume contains short articles by a variety of expert contributors outlining a particular topic and these articles are extensively cross referenced. References to related topics included in the volume are indicated by bold text in the articles, the bold text being the title of the relevant article. At the end of each article there is a list of bibliographic references where interested readers can obtain further detailed information on the subject of the article. This volume was produced at the invitation of Derek Brewis who asked me to edit a text which concentrated on the mechanical properties of polymers. There are already many excellent books on the mechanical properties of polymers, and a somewhat lesser number of volumes dealing with methods of carrying out mechanical tests on polymers. Some of these books are listed in Appendix 1. In this volume I have attempted to cover basic mechanical properties and test methods as well as the theory of polymer mechanical deformation and hope that the reader will find the approach useful.
Download or read book Bone Tissue Engineering written by Jeffrey O. Hollinger and published by CRC Press. This book was released on 2004-10-14 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on bone biology, Bone Tissue Engineering integrates basic sciences with tissue engineering. It includes contributions from world-renowned researchers and clinicians who discuss key topics such as different models and approaches to bone tissue engineering, as well as exciting clinical applications for patients. Divided into four sections, t
Download or read book Composite Materials for Aircraft Structures written by Alan A. Baker and published by AIAA. This book was released on 2004 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase Transformations in Steels written by Elena Pereloma and published by Elsevier. This book was released on 2012-05-11 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing-microstructure-property relationships in steels continue to present challenges to researchers because of the complexity of phase transformation reactions and the wide spectrum of microstructures and properties achievable. This major two-volume work summarises the current state of research on phase transformations in steels and its implications for the emergence of new steels with enhanced engineering properties.Volume 2 reviews current research on diffusionless transformations and phase transformations in high strength steels, as well as advances in modelling and analytical techniques which underpin this research. Chapters in part one discuss the crystallography and kinetics of martensite transformations, the morphology, substructure and tempering of martensite as well as shape memory in ferrous alloys. Part two summarises research on phase transformations in high strength low alloy (HSLA) steels, transformation induced plasticity (TRIP)-assisted multiphase steels, quenched and partitioned steels, advanced nanostructured bainitic steels, high manganese twinning induced plasticity (TWIP) and maraging steels. The final two parts of the book review advances in modelling and the use of advanced analytical techniques to improve our understanding of phase transformations in steels.With its distinguished editors and distinguished international team of contributors, the two volumes of Phase transformations in steels is a standard reference for all those researching the properties of steel and developing new steels in such areas as automotive engineering, oil and gas and energy production. - Alongside its companion volume, this major two-volume work summarises the current state of research on phase transformations in steels - Reviews research on diffusionless transformations and phase transformations in high strength steels - Examines advances in modelling and the use of advanced analytical techniques to improve understanding of phase transformations in steels
Download or read book Springer Handbook of Experimental Solid Mechanics written by William N. Sharpe, Jr. and published by Springer Science & Business Media. This book was released on 2008-12-04 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Handbook of Experimental Solid Mechanics documents both the traditional techniques as well as the new methods for experimental studies of materials, components, and structures. The emergence of new materials and new disciplines, together with the escalating use of on- and off-line computers for rapid data processing and the combined use of experimental and numerical techniques have greatly expanded the capabilities of experimental mechanics. New exciting topics are included on biological materials, MEMS and NEMS, nanoindentation, digital photomechanics, photoacoustic characterization, and atomic force microscopy in experimental solid mechanics. Presenting complete instructions to various areas of experimental solid mechanics, guidance to detailed expositions in important references, and a description of state-of-the-art applications in important technical areas, this thoroughly revised and updated edition is an excellent reference to a widespread academic, industrial, and professional engineering audience.
