Download or read book Exploitation of Unconventional Oil and Gas Resources written by Kenneth Imo-Imo Israel Eshiet and published by . This book was released on 2019-07-10 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: The stimulation of unconventional hydrocarbon reservoirs is proven to improve their productivity to an extent that has rendered them economically viable. Generally, the stimulation design is a complex process dependent on intertwining factors such as the history of the formation, rock and reservoir fluid type, lithology and structural layout of the formation, cost, time, etc. A holistic grasp of these can be daunting, especially for people without sufficient experience and/or expertise in the exploitation of unconventional hydrocarbon reserves. This book presents the key facets integral to producing unconventional resources, and how the different components, if pieced together, can be used to create an integrated stimulation design. Areas covered are as follows: • stimulation methods, • fracturing fluids, • mixing and behavior of reservoir fluids, • assessment of reservoir performance, • integration of surface drilling data, • estimation of geomechanical properties and hydrocarbon saturation, and • health and safety. Exploitation of Unconventional Oil and Gas Resources: Hydraulic Fracturing and Other Recovery and Assessment Techniques is an excellent introduction to the subject area of unconventional oil and gas reservoirs, but it also complements existing information in the same discipline. It is an essential text for higher education students and professionals in academia, research, and the industry.
Download or read book Stratigraphy and Sedimentation written by William Christian Krumbein and published by W.H. Freeman. This book was released on 1963 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mathematical Theory of Oil and Gas Recovery written by P. Bedrikovetsky and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is a pleasure to be asked to write the foreword to this interesting new book. When Professor Bedrikovetsky first accepted my invitation to spend an extended sabbatical period in the Department of Mineral Resources Engineering at Imperial College of Science, Technology and Medicine, I hoped it would be a period of fruitful collaboration. This book, a short course and a variety of technical papers are tangible evidence of a successful stay in the UK. I am also pleased that Professor Bedrikovetsky acted on my suggestion to publish this book with Kluwer as part of the petroleum publications for which I am Series Editor. The book derives much of its origin from the unpublished Doctor of Science thesis which Professor Bedrikovetsky prepared in Russian while at the Gubkin Institute. The original DSc contained a number of discrete publications unified by an analytical mathematics approach to fluid flow in petroleum reservoirs. During his sabbatical stay at Imperial College, Professor Bedrikovetsky has refined and extended many of the chapters and has discussed each one with internationally recognised experts in the field. He received great encouragement and editorial advice from Dr Gren Rowan, who pioneered analytical methods in reservoir modelling at BP for many years.
Download or read book Sand Control in Well Construction and Operation written by Davorin Matanovic and published by Springer Science & Business Media. This book was released on 2012-02-21 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Produced sand causes a lot of problems. From that reasons sand production must be monitored and kept within acceptable limits. Sand control problems in wells result from improper completion techniques or changes in reservoir properties. The idea is to provide support to the formation to prevent movement under stresses resulting from fluid flow from reservoir to well bore. That means that sand control often result with reduced well production. Control of sand production is achieved by: reducing drag forces (the cheapest and most effective method), mechanical sand bridging (screens, gravel packs) and increasing of formation strength (chemical consolidation). For open hole completions or with un-cemented slotted liners/screens sand failure will occur and must be predicted. Main problem is plugging. To combat well failures due to plugging and sand breakthrough Water-Packing or Shunt-Packing are used.
Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Well Completion Design written by Jonathan Bellarby and published by Elsevier. This book was released on 2009-04-13 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completions are the conduit between hydrocarbon reservoirs and surface facilities. They are a fundamental part of any hydrocarbon field development project. The have to be designed for safely maximising the hydrocarbon recovery from the well and may have to last for many years under ever changing conditions. Issues include: connection with the reservoir rock, avoiding sand production, selecting the correct interval, pumps and other forms of artificial lift, safety and integrity, equipment selection and installation and future well interventions. - Course book based on course well completion design by TRACS International - Unique in its field: Coverage of offshore, subsea, and landbased completions in all of the major hydrocarbon basins of the world - Full colour
Download or read book Petroleum Engineer s Guide to Oil Field Chemicals and Fluids written by Johannes Fink and published by Gulf Professional Publishing. This book was released on 2011-05-13 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Engineer's Guide to Oil Field Chemicals and Fluids is a comprehensive manual that provides end users with information about oil field chemicals, such as drilling muds, corrosion and scale inhibitors, gelling agents and bacterial control. This book is an extension and update of Oil Field Chemicals published in 2003, and it presents a compilation of materials from literature and patents, arranged according to applications and the way a typical job is practiced. The text is composed of 23 chapters that cover oil field chemicals arranged according to their use. Each chapter follows a uniform template, starting with a brief overview of the chemical followed by reviews, monomers, polymerization, and fabrication. The different aspects of application, including safety and environmental impacts, for each chemical are also discussed throughout the chapters. The text also includes handy indices for trade names, acronyms and chemicals. Petroleum, production, drilling, completion, and operations engineers and managers will find this book invaluable for project management and production. Non-experts and students in petroleum engineering will also find this reference useful. - Chemicals are ordered by use including drilling muds, corrosion inhibitors, and bacteria control - Includes cutting edge chemicals and polymers such as water soluble polymers and viscosity control - Handy index of chemical substances as well as a general chemical index
Download or read book Petroleum Production Engineering written by Boyun Guo and published by Gulf Professional Publishing. This book was released on 2017-02-10 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Production Engineering, Second Edition, updates both the new and veteran engineer on how to employ day-to-day production fundamentals to solve real-world challenges with modern technology. Enhanced to include equations and references with today's more complex systems, such as working with horizontal wells, workovers, and an entire new section of chapters dedicated to flow assurance, this go-to reference remains the most all-inclusive source for answering all upstream and midstream production issues. Completely updated with five sections covering the entire production spectrum, including well productivity, equipment and facilities, well stimulation and workover, artificial lift methods, and flow assurance, this updated edition continues to deliver the most practical applied production techniques, answers, and methods for today's production engineer and manager. In addition, updated Excel spreadsheets that cover the most critical production equations from the book are included for download. - Updated to cover today's critical production challenges, such as flow assurance, horizontal and multi-lateral wells, and workovers - Guides users from theory to practical application with the help of over 50 online Excel spreadsheets that contain basic production equations, such as gas lift potential, multilateral gas well deliverability, and production forecasting - Delivers an all-inclusive product with real-world answers for training or quick look up solutions for the entire petroleum production spectrum
Download or read book Applied Surfactants written by Tharwat F. Tadros and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: While currently available titles either focus on the basics or on very specific subtopics, this text meets the need for a comprehensive survey of surfactants and their properties, with a strong emphasis on applications and their correlation to the fundamentals. The author covers their classification, physical properties, phase behavior, adsorption, effects - such as wetting, spreading and adhesion - as well as industrial applications in personal care and cosmetics, pharmaceuticals, agrochemicals and food products. Professor Tadros is a well-known expert on the topic of surfactants, with much experience in colloid science. Here, he uses his industrial experience to close the gap between fundamentals of surfactants and their relevance and applications in practice.
Download or read book Composition and Properties of Drilling and Completion Fluids written by Ryen Caenn and published by Gulf Professional Publishing. This book was released on 2011-09-29 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: The petroleum industry in general has been dominated by engineers and production specialists. The upstream segment of the industry is dominated by drilling/completion engineers. Usually, neither of those disciplines have a great deal of training in the chemistry aspects of drilling and completing a well prior to its going on production. The chemistry of drilling fluids and completion fluids have a profound effect on the success of a well. For example, historically the drilling fluid costs to drill a well have averaged around 7% of the overall cost of the well, before completion. The successful delivery of up to 100% of that wellbore, in many cases may be attributable to the fluid used. Considered the "bible" of the industry, Composition and Properties of Drilling and Completion Fluids, first written by Walter Rogers in 1948, and updated on a regular basis thereafter, is a key tool to achieving successful delivery of the wellbore. In its Sixth Edition, Composition and Properties of Drilling and Completion Fluids has been updated and revised to incorporate new information on technology, economic, and political issues that have impacted the use of fluids to drill and complete oil and gas wells. With updated content on Completion Fluids and Reservoir Drilling Fluids, Health, Safety & Environment, Drilling Fluid Systems and Products, new fluid systems and additives from both chemical and engineering perspectives, Wellbore Stability, adding the new R&D on water-based muds, and with increased content on Equipment and Procedures for Evaluating Drilling Fluid Performance in light of the advent of digital technology and better manufacturing techniques, Composition and Properties of Drilling and Completion Fluids has been thoroughly updated to meet the drilling and completion engineer's needs. - Explains a myriad of new products and fluid systems - Cover the newest API/SI standards - New R&D on water-based muds - New emphases on Health, Safety & Environment - New Chapter on waste management and disposal
Download or read book Petroleum Production Systems written by Michael J. Economides and published by Pearson Education. This book was released on 2013 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by four leading experts, this edition thoroughly introduces today's modern principles of petroleum production systems development and operation, considering the combined behaviour of reservoirs, surface equipment, pipeline systems, and storage facilities. The authors address key issues including artificial lift, well diagnosis, matrix stimulation, hydraulic fracturing and sand control. They show how to optimise systems for diverse production schedules using queuing theory, as well as linear and dynamic programming. Throughout, they provide both best practices and rationales, fully illuminating the exploitation of unconventional oil and gas reservoirs. Updates include: Extensive new coverage of hydraulic fracturing, including high permeability fracturing New sand and water management techniques * An all-new chapter on Production Analysis New coverage of digital reservoirs and self-learning techniques New skin correlations and HW flow techniques
Download or read book Khanna s Objective Questions in Petroleum Engineering written by Vikas Mahto and published by KHANNA PUBLISHING. This book was released on 2016-01-01 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, an attempt has been made by the author to present numerous important questions with answers which have been methodically prepared/selected from different text books, manuals of petroleum industries, SPE technical papers and teaching materials of distinguished persons. These questions are very relevant for promoting fundamental understanding of petroleum engineering and will be primarily useful for fresh graduates of petroleum engineering who can prepare themselves soundly for both written as well as oral examinations.
Download or read book An Independent Scientific Assessment of Well Stimulation in California written by Ccst and published by . This book was released on 2015-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydraulic Fracturing in Unconventional Reservoirs written by Hoss Belyadi and published by Gulf Professional Publishing. This book was released on 2019-06-18 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic Fracturing in Unconventional Reservoirs: Theories, Operations, and Economic Analysis, Second Edition, presents the latest operations and applications in all facets of fracturing. Enhanced to include today's newest technologies, such as machine learning and the monitoring of field performance using pressure and rate transient analysis, this reference gives engineers the full spectrum of information needed to run unconventional field developments. Covering key aspects, including fracture clean-up, expanded material on refracturing, and a discussion on economic analysis in unconventional reservoirs, this book keeps today's petroleum engineers updated on the critical aspects of unconventional activity. - Helps readers understand drilling and production technology and operations in shale gas through real-field examples - Covers various topics on fractured wells and the exploitation of unconventional hydrocarbons in one complete reference - Presents the latest operations and applications in all facets of fracturing
Download or read book Petroleum Science and Technology written by Chang Samuel Hsu and published by Springer. This book was released on 2019-07-02 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aimed at students and professionals, this book covers every major aspect of petroleum: the origin of fossil hydrocarbons and their chemical/physical properties; discovering hydrocarbon reserves; recovering oil, gas, and bitumen; purifying gas; the chemical and physical characterization of crude oil; refining crudes into fuels and lubricants; and converting simple chemicals into solvents, polymers, fibers, rubbers, coatings, and myriad other products, including pharmaceuticals. Readers will learn how the industry operates, from "upstream" exploration and production, "midstream" transportation to "downstream" refining, and manufacturing of finished products. The book also contains unique chapters on midstream operations, learnings from major accidents, and safety/environmental laws and regulations. It builds on the authors' previous books and teaching material from a highly rated course that is taught at the Florida A&M University/Florida State University (USA).
Download or read book Remediation Engineering written by Suthan S. Suthersan and published by CRC Press. This book was released on 2016-11-25 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This second edition of Remediation Engineering will continue to be the seminal handbook that regulators must have on-hand to address any of the remediation issues they are grappling with daily. The book is wide-ranging, but specific enough to address any environmental remediation challenge." —Patricia Reyes, Interstate Technology Regulatory Council, Washington, DC, USA "This book offers the researcher, teacher, practitioner, student, and regulator with state-of-the-art advances in conducting site investigations and remediation for common and emerging contaminants. It is revolutionary in its approach to conducting subsurface investigation, which greatly influences a successful and appropriate response in assessing and addressing environmental risk. This book is a giant leap forward in understanding how contaminates behave and how to reduce risk to acceptable levels in the natural world." —Daniel T. Rogers, Amsted Industries Incorporated, Chicago, Illinois, USA "This text is a superb reference and a good tool for learning about state-of-the-art techniques in remediation of soil and groundwater. [It] will become a ready reference at many companies as the engineering community creates increased value from remediation efforts around the world." —John Waites, AVX Corporation, Fountain Inn, South Carolina, USA Remediation Engineering was first published in 1996 and quickly became the go-to reference for a relatively young industry, offering the first comprehensive look at the state-of-the-science in treatment technologies of the time and the contaminants they applied to. This fully updated Second Edition will capture the fundamental advancements that have taken place during the last two decades within all the subdisciplines that form the foundation of the remediation engineering platform. It covers the entire spectrum of current technologies that are employed in the industry and also discusses future trends and how practitioners should anticipate and adapt to those needs. Features: Shares the latest paradigms in remediation design approach and contaminant hydrogeology Presents the landscape of new and emerging contaminants Details the current state of the practice for both conventional technologies, such as sparging and venting Examines newer technologies such as dynamic groundwater recirculation and injection-based remedies to address both organic and inorganic contaminants. Describes the advances in site characterization concepts such as smart investigations and digital conceptual site models. Includes all-new color photographs and figures.
Download or read book Advanced Natural Gas Engineering written by Xiuli Wang and published by Elsevier. This book was released on 2013-11-25 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural gas is playing an increasing role in meeting world energy demands because of its abundance, versatility, and its clean burning nature. As a result, lots of new gas exploration, field development and production activities are under way, especially in places where natural gas until recently was labeled as "stranded. Because a significant portion of natural gas reserves worldwide are located across bodies of water, gas transportation in the form of LNG or CNG becomes an issue as well. Finally natural gas is viewed in comparison to the recently touted alternatives. Therefore, there is a need to have a book covering all the unique aspects and challenges related to natural gas from the upstream to midstream and downstream. All these new issues have not been addressed in depth in any existing book. To bridge the gap, Xiuli Wang and Michael Economides have written a new book called Advanced Natural Gas Engineering. This book will serve as a reference for all engineers and professionals in the energy business. It can also be a textbook for students in petroleum and chemical engineering curricula and in training departments for a large group of companies.
